22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.

com

Search... Existing user? Sign In  

Sign Up

Welcome to eMastercam
Register now to participate in the forums, access the download area, buy Mastercam
training materials, post processors and more. This message will be removed once
you have signed in.
Use your display name or email address to sign in:

SIGN IN
SIGN UP

   
Home Forums Store eCourses

 
Posts Downloads

Home 
eCourses 
Mastercam 2020 Mill Advanced eCourse
All Activity

Mastercam 2020 Mill Advanced eCourse     

This eCourse is designed to provide the resources you need to become
proficient with 3D geometry creation and toolpaths. If you are new to Buy Now

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 1/6
22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.com

Mastercam, it is highly recommended that you start with Mill Essentials (book 149.00

or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Regular License

Below you will find an overview of the eCourse video content organized by
tutorial and respective video segments. Each tutorial will walk you through
creating geometry, applying then verifying toolpaths and generating G-Code
for a machinable part. This course will take approximately 15 hours to
complete.

All videos in this eCourse are Closed Captions

INTRODUCTION

Mastercam 2020 Getting

15:52
Started

TUTORIAL 1

Tutorial 1 covers Surface High Speed Area Roughing, Surface High Speed Horizontal, Surface High Speed Waterline toolpaths. 

1. Intro 0:52

2. Wireframe Creation 4:34

3. Solid Creation 3:39

4. Machine Definition and Stock

0:43
Setup

5. High Speed Area Roughing 4:37

6. High Speed Horizontal Area 2:58

7. High Speed Waterline 3:28

TUTORIAL 2

Tutorial 2 covers Stock Model, Surface High Speed Area Roughing with Rest Material, Surface High Speed Radial, Surface Finish Blend,
and Tool Transform Rotate.

1. Intro 1:20

2. Wireframe and Surface

5:55
Creation

3. Solid Creation 5:40

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 2/6
22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.com

 4. Machine Definition and Stock 1:18

Model

5. Area Roughing and Stock

5:27
Model

6. Finish One Side Using Radial 2:54

7. Finish One Side Using Blend 3:41

8. Toolpath Transform Rotate

1:38
to Finish the Other Side

TUTORIAL 3

Tutorial 3 covers Surface High Speed Dynamic Optirough, Surface High Speed Dynamic Optirough with Rest Material, Stock Model,
and Surface High Speed Hybrid.

1. Intro 1:12

2. Wireframe Creation 10:50

3. Solid Creation 10:20

4. Machine Definition and Stock

0:39
Setup

5. Machine the Cavity using

4:19
Dynamic OptiRough

6. Stock Model After Roughing 0:35

7. OptiRough with Rest Material 4:60

8. Stock After OptiRest 0:48

9. Finish the Part with Equal

4:41
Scallops

TUTORIAL 4

Tutorial 4 covers Surface High Speed Area Roughing, Stock Model, Surface High Speed Scallop, Toolpath Transform Rotate, Surface
High Speed Spiral, and Surface High Speed Waterline.

1. Intro 1:05

2. Geometry Creation 23:13

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 3/6
22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.com

 3. Machine Definition and Stock

0:59
Setup

4. Rough the Part 3:18

5. Stock Model After Roughing 0:41

6. Cover Holes 0:58

7. Finish the Top Using Spiral 4:01

8. Finish the Walls Using

3:05
Waterline

9. Scallop One Pocket 5:14

10. Toolpath Transform Rotate

2:14
to Finish the Remaining Pockets

TUTORIAL 5

Tutorial 5 covers Solid Extrude Create Body, Extrude Boss, Extrude Cut, Draft to Face, Constant Radius Fillet, Shell, 2D High Speed
Dynamic Mill, Surface High Speed Dynamic OptiRough, Surface High Speed Hybrid, Surface High Speed Pencil, 2D High Speed Dynamic
Contour.

1. Intro 1:14

2. Solid Creation 15:06

3. Core Model Creation 8:01

4. Machine Definition and Stock

0:49
Setup

5. 2D Dynamic Mill 2:26

6. OptiRough 2:23

7. Hybrid 2:52

8. Pencil 2:31

9. Dynamic Contour 3:19

TUTORIAL 6

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 4/6
22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.com

Tutorial 6 covers Surface commands such as Net, Loft, and Flat Boundary. Toolpaths such as 2D High Speed Dynamic OptiRough,
Surface High Speed Scallop, Surface High Speed Pencil, Surface High Speed Project will be used.

1. Intro 0:56

2. Surface Creation 6:33

3. Machine Definition and Stock

0:51
Setup

4. Dynamic Mill to Rough up to

3:58
the Boss

5. OptiRough the Boss 2:24

6. Scallop to Finish the Core 3:39

7. Pencil to Finish the Sharp

2:17
Edges

8. Project to Engrave the Letter 3:33

EXERCISES

Exercises

2 Surface Blend 0:52

3 Surface Blend 0:50

3 Fillet Blend 3:26

Create Curves 1:10

Cube 2:54

Draft and Flat Boundary

1:10
Surfaces

Dynamic Planes 3:11

Fence Surface 1:36

Net Surface 1 1:55

Net Surface 2 0:31

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 5/6
22/09/2021 20:16 Mastercam 2020 Mill Advanced eCourse - eMastercam.com

 Net Surface 3 0:31

Plane by Entity 1:31

Plane by Normal 1:34

Primitives 2:18

Revolved Surface 0:46

Surface Fillet 2:19

Sweep Surface 0:41

Trim to Curves 1:58

Reviews
NEWEST MOST HELPFUL

Home 
eCourses 
Mastercam 2020 Mill Advanced eCourse
All Activity

Join us! Useful Links Legal Follow us

eMastercam - your online Contact Info Privacy Policy

source for all things


Mastercam. Subscribe to Store Terms &
eMastercam News Conditions
Together, we are the strongest 
Mastercam community on the   Forum Guidelines
web with over 56,000 members,
and our online store offers a
wide selection of training
materials for all applications
and skill levels.

Theme 
Contact Us Design with  Veilon.Net
Powered by Invision Community

https://www.emastercam.com/ecourses/ecourse/86-mastercam-2020-mill-advanced-ecourse/ 6/6