ALTAI C1N SUPER WIFI CPE

QUICK SETUP GUIDE

Version 1.1
Date: September, 2013

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

Packing List
1. C1n CPE Main Unit
2. Table Stand (Optional)
3. AC Adapter
4. DC Injector
5. 2pcs of wire clamp

Installation Options

LED Indication

Cable Connection
1. Connect C1n and DC injector with an Ethernet Cable;
2. Connect another network cable between DC injector “LAN” port and a
computer Ethernet port;
3. Connect the AC power adapter to the DC injector and plug it into a power
socket;
4. Make sure both the Power LED and the Network LED light green.

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

Configure TCP/IP of your computer

For Windows XP user,
1. Click Start > Control Panel, click Switch to Classic View and double click on
Network Connections
2. Right click on the Local Area Connection and click Properties.
3. Double click Internet Protocol (TCP/IP), Type in the following IP address and
Subnet mask:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0.
4. Click OK to close the Internet Protocol (TCP/IP) Properties and click OK again to
close the Local Area Connection Properties

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

Connect to C1n Web Interface

1. Open a web browser and type the URL http://192.168.1.222
2. Login the C1n web interface with:
User name: admin
Password: admin
3. Click OK
4. Click Enter on the web page

Configure C1n CPE Mode

1. Go to 2.4GHz Radio
2. Select Station as Radio Operation Mode and Click Submit

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

3. Select Station and Click More…

4. Click Scan to scan available SSID in WLAN General;

5. Select the desired SSID and click Select
6. Click Submit

7. Click WLAN Security

8. Select Authentication Mode and Cipher Mode provided by ISP
9. Click Submit and click Save&Apply

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

Configure C1n AP Mode

1. Go to 2.4GHz Radio
2. Select AP as Radio Operation Mode and click Submit

3. Click WLAN
4. Type in SSID to customize wireless network name.
5. Click Submit

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

6. Click the More… and Click WLAN Security

7. Select WPA-PSK/WPA2-PSK for Authentication Mode and select AES for Cipher
Mode
8. Type in a password with 8~63 characters or numbers in PassPhrase and click
Submit and Save&Apply.

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine
 Altai C1n Super WiFi CPE Quick Setup Guide for 1.2.0.600
TPS13-002_rev1.1

Verify C1n AP/CPE Connection Status

For AP Mode
1. Using a laptop to scan the SSID you set for C1n AP and try to connect to it.
2. Go to Status > Interface > Association List to check the client information.

For CPE Mode

1. Go to Status > Interface > AP Info to
check associated AP information.
2. To reset TCP/IP Settings
Click Start > Control Panel and double
click on Network Connections
3. Right click on the Local Area Connection
and click Properties.
4. Double click Internet Protocol (TCP/IP)
5. Select Obtain an IP address
automatically Click OK to close the
Internet Protocol (TCP/IP) Properties and
click OK again to close the Local Area
Connection Properties

Altai Technologies Ltd. All rights reserved

Downloaded from www.Manualslib.com manuals search engine