Scribd Logo
Upload

Welcome to Scribd!

  • 169 views

    Fluid Mechanics Lesson 2

    Uploaded by

    Harold Rondilla
    This document contains 17 problems related to fluids and hydraulics. The problems involve calculating pressures, densities, specific gravities, and other properties at various depths and configurations of liquids, gases and hydraulic systems. Equations of fluid statics and hydrostatics are applied to solve for unknown values. Sample problems include determining pressure and properties at a given depth below a liquid surface, calculating pressures in multi-layered liquid systems, and finding forces required to balance weights in hydraulic systems.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Fluid Mechanics Lesson 2

    Uploaded by

    Harold Rondilla
    169 views4 pages
    This document contains 17 problems related to fluids and hydraulics. The problems involve calculating pressures, densities, specific gravities, and other properties at various depths and configurations of liquids, gases and hydraulic systems. Equations of fluid statics and hydrostatics are applied to solve for unknown values. Sample problems include determining pressure and properties at a given depth below a liquid surface, calculating pressures in multi-layered liquid systems, and finding forces required to balance weights in hydraulic systems.

    Original Title

    355659224 Fluid Mechanics Lesson 2

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 17 problems related to fluids and hydraulics. The problems involve calculating pressures, densities, specific gravities, and other properties at various depths and configurations of liquids, gases and hydraulic systems. Equations of fluid statics and hydrostatics are applied to solve for unknown values. Sample problems include determining pressure and properties at a given depth below a liquid surface, calculating pressures in multi-layered liquid systems, and finding forces required to balance weights in hydraulic systems.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    169 views4 pages

    Fluid Mechanics Lesson 2

    Uploaded by

    Harold Rondilla
    This document contains 17 problems related to fluids and hydraulics. The problems involve calculating pressures, densities, specific gravities, and other properties at various depths and configurations of liquids, gases and hydraulic systems. Equations of fluid statics and hydrostatics are applied to solve for unknown values. Sample problems include determining pressure and properties at a given depth below a liquid surface, calculating pressures in multi-layered liquid systems, and finding forces required to balance weights in hydraulic systems.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Module 2; Fluids and Hydraulics

    Problem 1
    If the pressure 23 meter below a liquid is 338.445 kPa, determine its unit weight γ , mass density ρ , and specific gravity s.
    Ans; 14.72 kN/m3; 1500 kg/m3; 1.5

    Problem 2
    If the pressure at a point in the ocean is 60 kPa, what is the pressure 27 meters below this point?
    Ans; 332.816 kPa

    Problem 3
    If the pressure in the air space above an oil (s=0.75) surface in a closed tank is 115 kPa absolute, what is the gage pressure 2 m
    below the surface?
    Ans; 28.42 kPa

    Problem 4
    Find the absolute pressure in kPa at a depth of 10 m below the free surface of oil of sp. gr. 0.75 if the barometric reading is 752
    mmHg.
    Ans; 173.90 kPa

    Problem 5
    An open tank contains 5.8 m of water covered with 3.2 m of kerosene ( γ =8 kN/m3). Find the pressure at the interface and at
    the bottom of the tank.

    Ans; 25.6 kPa; 82.498 kPa

    Problem 6

    If atmospheric pressure is 95.7 kPa and the gage attached to the tank reads 188 mm-Hg vacuum, find the absolute pressure
    within the tank.

    Ans; 70.62 kPa abs

    Problem 7

    In the figure shown, if the atmospheric pressure is 101.03 kPa and the absolute pressure at the bottom of the tank is 231.3 kPa,
    what is the specific gravity of olive oil?

    Ans; 1.38
    Problem 8

    Assuming specific weight of air to be constant at 12 N/m 3, what is the approximate height of Mount Banahaw if a mercury
    barometer at the base of the mountain reads 654 mm and at the same instant, another barometer at the top of the mountain
    reads 480 mm.
    Ans; 1934.53

    Problem 9
    In the figure shown, determine the weight W that can be carried by the 1.5 kN force acting on the piston.

    Ans; 150 kN

    Problem 10
    The figure shown shows a setup with a vessel containing a plunger and a cylinder, what force F is required to balance the
    weight of the cylinder if the weight of the plunger is negligible?

    Ans; 326 N

    Problem 11
    cThe hydraulic press shown is filled with oil with sp. gr. 0.82. Neglecting the weight of the two pistons. What force F on the
    handle is required to support the 10 kN weight?

    Ans; 65.29 N
    Problem 12
    In the figure shown, what is the static pressure in kPa in the chamber?

    Ans; -11.77 kPa

    Problem 13
    For the manometer shown, determine the pressure at the center of the pipe.

    Ans; 145 kPa

    Problem 14
    The pressure at point m in the figure shown was increased from 70 kPa to 105 kPa. This causes the top level of mercury to move
    20 cm in the sloping tube. What is the inclination,θ ?
    Ans; 23°
    Problem 15
    Assuming normal barometric pressure, how deep in the ocean is the point where an air bubble, upon reaching the surfaces, has
    six times its volume than it had at the bottom?
    Ans; 50.13 m

    Problem 16
    For a gage reading of -17.1 kPa, determine the a.) elevations of the liquids in the open piezometer columns E, F, and G and b.)
    the deflection of the mercury in the U-tube manometer neglecting the weight of air.
    Ans; a.) 12.5 m; 12.357 m; 10.72 m; b.) 0.614 m

    Problem 17
    A vertical tube, 3 m long, with one end closed is inserted vertically, with the open end down, into a tank of water to such a
    depth that an open manometer connected to the upper end of the tube reads 150 mm of mercury. Neglecting vapor pressure
    and assuming normal conditions, how far is the lower end of the tube below the water surface in the tank?

    You might also like