Scribd Logo
Upload

Welcome to Scribd!

  • 279 views

    35kv CABLES AMPACITIES

    Uploaded by

    gerrzen64

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    35kv CABLES AMPACITIES

    Uploaded by

    gerrzen64
    279 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    279 views2 pages

    35kv CABLES AMPACITIES

    Uploaded by

    gerrzen64

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    35kV Primary UD EPR

    35kV Primary UD
    EPR Cable
    Aluminum or Copper Conductor. EPR Insulation.
    Bare Copper Concentric Neutrals.
    Low Density Polyethylene Jacket.

    APPLICATIONS
    Predominantly used for primary underground distribution in conduit systems; suitable for use in wet or dry locations, direct
    burial, underground duct, and where exposed to sunlight. To be used at 35,000 volts or less and at conductor
    temperatures not to exceed 105°C for normal operation.

    SPECIFICATIONS
    Southwire 35kV Primary UD EPR Cable meets or exceeds the following ASTM specifications:
    • B3 Soft Annealed Copper Wire
    • B8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft
    • B230 Aluminum, 1350-H19 Wire for Electrical Purposes
    • B231 Aluminum 1350 Conductors, Concentric-Lay-Stranded
    • B609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    Southwire 35kV Primary UD EPR Cable is manufactured to the latest edition of the following specifications, and in the
    order as listed:
    • ANSI/ICEA S-94-649
    • AEIC CS-8
    • UL 1072, When Specified
    • RUS 1728F-U1

    CONSTRUCTION
    The cable is composed of a solid or moisture blocked reverse lay, compressed stranded soft drawn copper, or a solid or
    moisture blocked reverse lay or unilay compressed stranded 1350-H16/26 aluminum phase conductor, covered by a
    semi-conducting cross-linked polyethylene strand shield, an ethylene propylene rubber primary insulation, and a semi-
    conducting cross-linked polyethylene insulation shield. Conductors are available with either 100% or 133% insulation
    levels. A concentric neutral of bare copper wires and a sunlight resistant, -40°C rated, insulating linear low density
    polyethylene jacket are applied over the insulation shield. The cable is identified by surface print on the jacket and with the
    lightning bolt symbol for supply cables indented in the jacket. Red extruded stripes available upon request. A semi-
    conducting polyethylene jacket is also available upon request.

    Copyright 2013, Southwire Company.


    All Rights Reserved
    35kV Primary UD EPR

    Weight
    Thickness Per Cond. Nominal Allowable
    Phase Conductor Neutral 1000 feet
    (mils) Diameter (mils) Ampacities+
    (lbs.)

    Insul.
    Size Bare Over
    No. of Size Nominal Shield Approx. Over Comp. Comp. Direct In
    (AWG or Stranding Phase Insul.
    Wires (AWG) Insul. min. Jkt. Insul. Cable Cable Burial Ducts
    kcmil) Cond. Shield
    Point

    ALUMINUM CONDUCTOR - 0.345" INSULATION - 100% INSULATION LEVEL


    1/0 Solid 16 14 345 40 50 325 1060 1160 1388 962 209* 149*
    1/0 19 16 14 345 40 50 352 1085 1185 1413 987 209* 149*
    2/0 19 20 14 345 40 50 395 1130 1230 1458 1099 237* 171*
    3/0 19 25 14 345 40 50 443 1175 1275 1503 1228 270* 187*
    4/0 19 20 12 345 40 50 498 1230 1330 1592 1432 308* 220*
    250 37 16 10 345 40 80 558 1300 1400 1758 1747 341* 242*
    350 37 18 14 345 40 80 661 1405 1505 1787 1589 384** 323**
    500 37 25 14 345 40 80 789 1530 1630 1912 1929 463** 389**
    750 61 24 12 345 55 80 968 1720 1850 2166 2596 565** 483**
    1000 61 20 10 345 55 80 1117 1868 1998 2355 3187 645** 550**
    1250 91 25 10 345 55 80 1250 2013 2143 2500 3736 692** 609**
    1500 91 30 10 345 55 80 1370 2133 2263 2620 4244 731** 644**
    COPPER CONDUCTOR - 0.345" INSULATION - 100% INSULATION LEVEL
    1/0 Solid 25 14 345 40 50 325 1060 1160 1388 1293 262* 186*
    1/0 19 25 14 345 40 50 362 1095 1195 1423 1333 262* 186*
    2/0 19 20 12 345 40 50 405 1140 1240 1502 1569 300* 215*
    3/0 19 25 12 345 40 50 456 1190 1290 1552 1815 340* 238*
    4/0 19 20 10 345 40 50 512 1245 1345 1649 2172 389* 276*
    250 37 24 10 345 40 80 558 1300 1400 1758 2526 430* 305*
    350 37 18 12 345 40 80 661 1405 1505 1821 2506 485** 406**
    500 37 26 12 345 40 80 789 1530 1630 1946 3240 573** 480**
    750 61 25 10 345 55 80 968 1720 1850 2208 4567 675** 574**
    1000 61 26 9 345 55 80 1117 1868 1998 2380 5762 729** 642**
    1250 91 26 8 345 55 80 1250 2013 2143 2553 7002 769** 677**
    + Ampacities shown assume use of 100% load factor, 60 Hz current, 36" burial depth, 20°C ambient temperature, 90°C
    conductor temperature, earth RHO 90, insulation and shield RHO 400
    * Full neutral construction (Ampacities assume - single phase circuit, one cable)
    ** 1/3 neutral cable (Ampacities assume - three phase circuit, 3 cables triplexed, multi-point grounding per ICEA methods)

    One Southwire Drive


    Carrollton, GA 30119 USA
    770/832-4242
    ®
    Southwire is a registered trademark of Southwire Company www.southwire.com

    You might also like