Scribd
Upload
132 views1 page

Catalog Modicon M221 Programmable Logic Controller For Hardwired Architectures - 17

This document summarizes the Modicon M221 programmable logic controller and its capabilities. The M221 can be extended with Modicon TM3 expansion modules to add up to 488 digital I/O and 114 analog I/O. The TM3 modules include counters, digital and analog I/O, safety modules, and communication modules. The M221 supports up to 7 local TM3 modules and an additional 7 remote modules, or it can use up to 2 TM3 bus couplers to enable distributed I/O across 3 modules per coupler. Configuration of the system is done through Schneider Electric's EcoStruxure Machine Expert software.

Uploaded by

S D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views1 page

Catalog Modicon M221 Programmable Logic Controller For Hardwired Architectures - 17

This document summarizes the Modicon M221 programmable logic controller and its capabilities. The M221 can be extended with Modicon TM3 expansion modules to add up to 488 digital I/O and 114 analog I/O. The TM3 modules include counters, digital and analog I/O, safety modules, and communication modules. The M221 supports up to 7 local TM3 modules and an additional 7 remote modules, or it can use up to 2 TM3 bus couplers to enable distributed I/O across 3 modules per coupler. Configuration of the system is done through Schneider Electric's EcoStruxure Machine Expert software.

Uploaded by

S D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Presentation Modicon M221

Programmable logic controller for hardwired


architectures
I/O extensions with Modicon TM3 expansion modules

Extended I/O with Modicon TM3 I/O system

c 24 V
1 2 3 4 5 6 7 7 2 3 4 5 6
EtherNet

Local I/O Remote I/O

8 Distributed I/O

8 Distributed I/O
1  Modicon M221 Logic controller (TM221CEpp or TM221MEpp)
Modicon TM3 I/O system (2…8)
2  TM3 Expert counter module
3  TM3 Digital I/O module
4  TM3 Analog I/O module
5  TM3 Expert module for controlling TeSys motor starters
6  TM3 Functional safety module
7  TM3 Bus expansion module (transmitter and receiver) and bus expansion cable
8  TM3 Bus Coupler (2x bus couplers are allowed)

Modicon TM3 expansion modules


b The capacity of M221 and M221 Book logic controllers can be enhanced with the
Modicon TM3 expansion module offer (1):
- Digital I/O modules that can be used to create configurations with up to 488
digital I/O. These modules are available with the same connections as the
controllers.
- Analog I/O modules that can be used to create configurations with up to
114 analog I/O and are designed to receive, amongst other things, position,
temperature, and speed sensor signals. They are also capable of
controlling variable speed drives or any other device equipped with a
current or voltage input.
- Expert modules for high-speed counting (24 V c inputs ), and event
counting with or without event management on fast inputs/thresholds/stop.
- Expert module for control of TeSys motor-starters, connected with RJ 45
cables to simplify wiring up the control section.
- Functional safety modules that simplify wiring and can be configured in the
Bus couplers configuration EcoStruxure Machine Expert - Basic software (2).
Modicon TM3 Bus coupler
b M221 controller allows to connect up to 2x Modicon TM3 Bus Couplers on serial
communication or on an Ethernet (Modbus/TCP) communication.
The configuration is done thanks to Ecostruxure Machine Expert - Basic
software. The TM3 bus port located on the right-hand side of the Modicon M221
controller allows connection of any of the TM3 expansion modules for local,
remote, or distributed I/O configurations:
- Local I/O: 7x Modicon TM3 expansion modules (max. configuration)
- Remote I/O: + 7x remote modules (equals 14x TM3 modules: 7x local +
7x remote)
- Distributed I/O: up to 2x TM3 Bus Couplers, allowing 3x TM3 I/O modules by
Bus Coupler
(1) Please consult catalog Ref. DIA3ED2140109EN
(2) Please consult catalog Ref. DIA3ED2180701EN
DIA3ED2140109EN DIA3ED2180701EN

17

You might also like