Computer Tech Manual2
Computer Tech Manual2
HARDWARE
TYPES OF CASING
Tower Case
Desktop Case
CABLE CONNECTORS
Sata Cable
Sata Power Connector
IDE Cable
24 Pin ATX Power Connector
4 Pin ATX Power Connector
FRONT PANNEL
POWER LED POWER SWITCH
Memory Slot
RAM
CPU
Graphics Card
4 Pin ATX power connector
SOFTWARE
OPERATING SYSTEM INSTALLATION (OS)
1. Turn off computer
2. Connect USB Installer to USB port and should be in 2.0
3. Turn off computer and press DELETE on keyboard
4. Setup Boot Priority 1 to USB Installer and Boot Priority 2 to HDD
5. Save and Exit
6. Setup installation and create partitions
7. When the computer restarts, press DELETE on keyboard
8. Setup Boot Priority 1 to HDD and Boot Priority 2 to USB Installer
9. Save and Exit
10. Wait until installation is done
HKEY_CURRENT_USER
Control Panel
Desktop
Menu show delay
Change value to 50 or 0
MSCONFIG
Run msconfig (WINDOW +R on keyboard and type msconfig)
Startup
Uncheck all but USB security
Apply
Restart
ACTION CENTER
Go to control panel
Action center
Change action center
setting
Uncheck all
Ok
WINDOWS UPDATE
Go to control panel
Action center
Windows update
Change settings
Turn off updates
NETWORKING (offline)
Right click on the Network icon
Open network and sharing center
Change adapter setting
Right click on the local area connections
Properties
Internet protocol version 4
Properties
Use the following IP address
192.168.x.x
The two x means it’s your own choice of number to input
For the last x it depends on the number of pc you want to connect
Tab
Ok
Run CMD
Ping each PC
Ping other PCs
COMMON PROBLEMS IN NETWORKING
Check Cables
Check Connections
Check Hub
Check Bios setting
Check if local area connection is disabled
Lan port connection
SYSTEM RESTORATION
Restart pc
Press f8 on keyboard
Safe mode
Run msconfig
Tools
Click system restore