Scribd
Upload
2K views3 pages

4G Command

This document provides commands to check the status and configuration of network equipment. Some of the commands check alarm status, product information, cell configuration and traffic. Other commands allow restarting units, changing user labels and IP addresses. Emergency unlock requires a reset key. IP and broker addresses are checked between ranges 80-87.

Uploaded by

vivek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
2K views3 pages

4G Command

This document provides commands to check the status and configuration of network equipment. Some of the commands check alarm status, product information, cell configuration and traffic. Other commands allow restarting units, changing user labels and IP addresses. Emergency unlock requires a reset key. IP and broker addresses are checked between ranges 80-87.

Uploaded by

vivek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

amos IP

lt all
rbs
rbs

1- st rru (rru status check)


2- st cell (cell status check)
3- bl tdd (tdd cell lock)
4- deb tdd (tdd cell unlock)
5- alt (site alarm check)
6- hget rru prod (to check rru product)
7- ue print -admitted (to check 4g call check tdd/fdd traffic)
8- invrxf (4g vswr check)
9- alt (alarm check)
10- st rilink (RILINK CHECK)
11- get . rilink (SFP CHECK)
12- cabx (3g vswr cxheck)
13- st tdd (tdd status check)
14- st fdd (fdd status check)
15- st radio (gps enable/disable check)
16- get . timeand (gps true/false)
17- get siteid userlabel (site userabel command)
18- cvcu (software check)
19- st proxy proxy proxy userlabel zz/zr_sitename (userlabel change command)
20- st near (to check RET)
21- get . linkrate (To check SFP rilinkrate)
22- pmr -m 2 -r 206 |grep InterferencePwr (RSSI CHECK)
23- get . vlanid (to check vlan id)
24- authtrace radnode
pr trust
get . certificates
authtrace comuser (to check certificate)
25- st interface (PORT) TO check abis
get . boker (IP)
26- acc BB-1 restartunit 1 0 0 (to restart bb unit)
st field
accn porxy restartunit 1 0 0
27- get . electical (to check tilt LTE by default it is 20)
28- get . digital (to check tilt mimo by default it is 20)
29- get . crsgain(to check crs gain it should be 300)
30- invrxg (To check graph)
get . gsmsector (abis on gsm cell)
traceroute 10.27.83.158
31- get cabenet=1 (TO clear cabinet mismatch alarm)
hget address address
hget nexthop address
mcc router=abis ping
mcc 15053 ping 10.8.73.145 -c 5 (to check next hope address)
32- get . broker
mcc router=abis ping IP (To check abis broker ip ping)
33- acc rruproxy restartunit(to restart rru only)
34- acc 0 manualrestart(DUS Restartunit)
35- accn 899 restartunit 0 2 aa (RRU restartunit)
36- bl near (to lock ret)
37- get radio no (To check 3g traffic)
38- get . configuredmax(To check power at sector) get , availablehw & hget sector
ant
39- get site id tac (To check tac)
40- invl power (To check power)
41- get . power (to check power)
42- Ping -s IP 1500 10 (to check packet loss in dus)
43- Sync Frequency Server Reachability Fault Synchronization=1 (PTP ka alarm)
44- cvset (cv name) and cv rbset (cvname)----For Dus pe cv
45- l cd /home/CMLVL2/ebaadit/DUS
run gigabit.mos(To gigabit clear alarm..)
46- get . tss (To check abis state)
47- get . electricalAntennatilt (To check Electrical tilt)
48- LPALAJ2> hget address address (To check abis/o&m/cp/up IP)
49- ntprecover accept >>> for ntp alarm
50- gps02reset all >>>>> (Gps reset)
51- get . vswrsupervision (vswr supervision)
52- hget rfport vswr (vswr supervision)
53- get . slogan (External Alarm Check)
54- RXTCP:MOTY=RXSTG,CELL=PAJM09C; (to check tg value)
55- get . numoft (No of tx antenna)
56- get keyfilei (License check)
57- cv rbset ngsdone (duw)
58- Invl router (mme disable ka feature activate krna)
59- DUW baseline (duw_baseline.txt)
60- license server (Dus lkf check)
61- bsc trx capacity check ( <raclp;)
62- run gps.txt (mh gps script)
63- tpcop:snt=ETM2-8;
dtstp:dip=369RBL2;
64- dtble:dip=369RBL2; (dip unblock)
65- dtbli:dip=369RBL2; (dip block)
66- ipconfig /all
67- dcgk
68- mcc router ping 10.238.33.9 --count 3
69- hpget cell pmEndcSetupUeAtt$|pmEndcSetupUeSucc$|pmEndcCapableUe$|
pmEndcRelMnMcgRelocAtt$|pmEndcRelMnMcgRelocSucc$|pmEndcSetupFailNrRa$|
pmEndcSetupScgUeAtt$|pmEndcSetupScgUeSucc$ (Nr Cell Traffic)

200321-10:47:57 10.16.53.171 19.0a MSRBS_NODE_MODEL_18.Q4_369.27924.51_aace


stopfile=/tmp/25421
..
===================================================================================
==============================
MO address
addressIPv4Id usedAddress
===================================================================================
==============================
Router=ABIS,InterfaceIPv4=TN_C_ABIS,AddressIPv4=TN_C_ABIS 10.229.238.181/28
TN_C_ABIS 10.229.238.181/28
Router=LTECP,InterfaceIPv4=TN_C_CP,AddressIPv4=TN_C_CP 10.16.52.171/28 TN_C_CP
10.16.52.171/28
Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP 10.16.51.171/28 TN_C_UP
10.16.51.171/28
Router=OAM,InterfaceIPv4=TN_C_OAM,AddressIPv4=TN_C_OAM 10.16.53.171/28
TN_C_OAM 10.16.53.171/28
===================================================================================
==============================
Total: 4 MOs
How to change userlabel>>>

a-get siteid userlabel (site userabel command)


b-prox
c-get LRMPRB1 userlabel
d-set 51 102 173 userLabel ZR_Rampura

By Akshay Sir #####(2020-01-20 10:24:03 w Emergency Unlock Reset Key Required


Lm=1,EmergencyUnlock=1 (Emergency Unlock Reset Key required AI: CI:{"C":
[{"I":"7203c000-af7d-11e6-8e92-903809a71799","n":"RadioNode"}]})
>>> Total: 1 Alarms (0 Critical, 0 Major) ye alarm tb ayega jb iu activate karke
emergency activate karenge aur wo us basband ka ni hoga.#####fir dubara LKF licence
request DUBARA denge.###

SGW 80 TO 87 (ANY ONE NOT PRESENT SO NOK) as well as Abis broker ip

You might also like