Btled He Midterm Exam
Btled He Midterm Exam
Btled He Midterm Exam
a. Speedometer
b. Odometer
4. The ____________ is an electromechanical device.
a. Cell
b. Battery
c. Electrolyte
d. Temperature
5. Which of the following refers to the antimonial lead burned to the positive pillar of one cell and
the negative pillar of the next to connect cells in a series.
a. Cell cover
b. Battery case
c. Vent plug
d. Cell connector
6. Which of the following refers to the part which fits the over the top of the cell to prevent
electrolyte loss and keep foreign material out .
a. Cell Connector
b. Vent Plug
c. Cell cover
d. Battery case
7. What is the primary function of a lubricant?
a. To minimize the friction between moving parts of a vehicle.
b. To minimize early wearing out of its rubbing surfaces
c. It prevents rust
d. All choices are all possible answers.
8. When was automobile invented and developed?
a. 18th Century
b. 16th Century
c. 11th Century
d. 19th Century
9. What do you need to consider in buying tools and equipment?
a. Cheap
b. Quality
c. Expensive
d. Affordable
12. It uses up the energy developed in it to provide mechanical power to move the vehicle.
a. Fuel
b. Electrical
c. Engine
d. Cooling
13. It is composed of very small crystal lead that provides wedge in a rectangular grid.
a. Negative Plate
b. Positive Plate
c. Bubonic Plate
d. Neutral Plate
14. Which of the following tools are versatile tools that are used for gripping and bending hardware?
15. Which of the following tools are used to lift part of a car off the ground?
a. Caliper
b. Die
c. Tap
d. Jack
16. Which of the following tools used for lifting or lowering a load by means of a drum or lift-
wheel around which rope or chain wraps?
a. Vermier Caliper
b. Drill Press
c. Chain hoist
d. Torque wrench
a. Odometer
b. Speedometer
c. Multitester
d. Multimeter
18. Which of the following tools used to measure the dimensions of an object?
a. Vermier caliper
b. Caliper
c. Micrometer caliper
d. Steel rule
19. Which of the following tools are used to cut fine amounts of material from a work place and
also known as rat tail file?
a. Round file
b. Triangular file
20. Which of the following indicates the amount of fuel in the tank?
a. Ammeter Gauge
d. Fuel Gauge
II. Enumeration:
20- 30 Mr. San Agustin is Going to Baguio for vacation. He will travel using his car. Before
travelling what parts of the car does he need to check in order for him to travel smoothly?
What does he need to check to guarantee his safety on the way? Why?
36-40. A car racer wants to measure in terms of time speed and distance he travelled during a
race. How is he going to measure the time speed and distance he travelled? Justify your answer
in 3-5 sentences.
40-50. Make a comparison of human body to a car. What would its parts represent? 2 points
each.
College of Teacher Education
TABLE OF SPECIFICATION
VGNETTE SAN AGUSTIN CHRISTINA ALFILER, Ph.D. MARIE CLAUDETTE CALANOGA, Ph.D.
Faculty Member Department Chair College Dean