®

DataMan Configuration Codes

03/08/2018
Revision: 6.1.0.4
 Legal Notices

Legal Notices
The software described in this document is furnished under license, and may be used or copied only in accordance with
the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this
document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee.
Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes
no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation.
Cognex Corporation makes no warranties, either express or implied, regarding the described software, its
merchantability, non-infringement or its fitness for any particular purpose.
The information in this document is subject to change without notice and should not be construed as a commitment by
Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or
the associated software.
Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document
may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor
transferred to any other media or language without the written permission of Cognex Corporation.
Copyright © 2018. Cognex Corporation. All Rights Reserved.
Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as
well as pending U.S. and foreign patents listed on the Cognex web site at: http://www.cognex.com/patents.

The following are registered trademarks of Cognex Corporation:

Cognex, 2DMAX, Advantage, AlignPlus, Assemblyplus, Check it with Checker, Checker, Cognex Vision for Industry,
Cognex VSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, Laser Killer, MVS-8000,
OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,
UltraLight, Vision Solutions, VisionPro, VisionView
The following are trademarks of Cognex Corporation:
The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, Cognex VSoC, CVC-1000, FFD, iLearn, In-Sight
(design insignia with cross-hairs), In-Sight 2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax,
PatMax RedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand
Other product and company trademarks identified herein are the trademarks of their respective owners.

2
 Table of Contents

Table of Contents
Legal Notices 2
Table of Contents 3
Configuration Codes 5
Product Settings 6
Reset 7
Disable Buttons 8
Diagnostics 9
Setup 10
Light Aimer 11
Trigger Type 12
Custom Commands 14
Maximum Exposure 15
Symbology Settings 18
2D Symbology Settings 27
QR Code Maximum Grid Size 29
1D Symbology Settings 31
Training 33
Data Validation / Data Formatting 34
Non-Printable Characters 36
Wireless 37
Buffering 38
Power Management 39
Wake-up Message 41
PS/2 Keyboard Emulation Enable 42
ASCII Keyboard Command Codes 43
iOS Keyboard Configuration 54
USB Connection 55
USB Mode 58
Communication Settings 60
RS-232 Baud Rate 64
RS-232 Parity Settings 66

3
 Table of Contents

RS-232 Databit Settings 68

RS-232 Stopbit Settings 69
RS-232 Handshaking 70
RS-232 Routing 71
Network Settings 72
Decode Settings 73
Master / Slave 74
Keyboard Country 75
Alt Key Combo Zero Padding 78
USB Keyboard Inter-Character Delay 79

4
 Configuration Codes

Configuration Codes
Configuration Codes are special Data Matrix codes to configure your reader without the DataMan Setup Tool. Lights and
beeping indicate that a Configuration Code was read. Beeps can also indicate that a command has not been executed: if
the code is read but the command is not executed (e.g. because of the command not being valid for the type of reader
used for reading the code), the reader gives 2 beeps.
You can read these codes without enabling the decoding of Data Matrix symbols. In such cases, make sure that you use
Manual or Presentation trigger mode.
Adjust focus settings if you have trouble reading Configuration Codes.

Note: When using wireless handheld readers, the reader must be put on the base station for security reasons after
reading a printed configuration code.

Note: The asterisk indicates the default value for all the consecutive or the indicated reader(s).

5
 Product Settings

Product Settings
Reset Scanner to Factory Defaults

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Reset Base Station to Factory Defaults

DM8000Base

6
 Reset

Reset
Reboot Scanner

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Reboot Base Station

DM8000Base

7
 Disable Buttons

Disable Buttons
Disable Trigger Button

All

Disable Tune Button

All

8
 Diagnostics

Diagnostics
Output Diagnostic String
(only with RS-232 and USB connections)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Output Diagnostic String

(through the DM8000 Base Station with RS-232 and USB
connections)

DM8000 wireless

9
 Setup

Setup
Enable Setup 1 Only

DM8600

Enable Setup 2 Only

DM8600

Enable Setup 3 Only

DM8600

Enable Setup 4 Only

DM8600

10
 Light Aimer

Light Aimer
*Light aimer ON
(default for DM50, DM60, and DM8000)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM8000 ● MX-1000 ● MX-1502

*Light aimer OFF

(default for DM300)

DM50 ● DM60 ● DMD70 ● M150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM8000 ● MX-1000 ● MX-1502

11
 Trigger Type

Trigger Type
Enable Presentation

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000

*Enable Manual (button)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Single (external)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable Burst (external)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable Self (internal)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

12
 Trigger Type

Enable Continuous (external)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

13
 Custom Commands

Custom Commands
Enable Serial Trigger

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300

●DM360 ● DM470 ● DM503

*Disable Serial Trigger

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable Echo Commands

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Disable Echo Commands

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

14
 Maximum Exposure

Maximum Exposure
100 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

133 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*170 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

250 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

500 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

15
 Maximum Exposure

800 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*1000 µs
(default for DM50, DM60, DM70, DM300, DM360,
DM470, and DM503)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

2000 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM360 ●

DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-1502

*5000 µs
(deafult for MX-1000 and MX-1502 )

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

8000 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

16
 Maximum Exposure

10000 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

*13333 µs
(default for DM8000)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

20000 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

25000 µs

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM503 ●

DM8000 ● MX-1000 ● MX-1502

17
 Symbology Settings

Symbology Settings
*Enable ID Max

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable ID Quick

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Enable Data Matrix

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable Data Matrix

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable QR Code

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

18
 Symbology Settings

*Disable QR Code

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable MaxiCode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8050 ● DM8600

*Disable MaxiCode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8050 ● DM8600

Enable Aztec Code

DM150 ● DM260 ● DM300 ● DM360 ● DM470 ● DM503

● DM8050 ● DM8600

*Disable Aztec Code

DM150 ● DM260 ● DM300 ● DM360 ● DM470 ● DM503

● DM8050 ● DM8600

19
 Symbology Settings

*Enable Code 128

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable Code 128

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Enable UPC/EAN

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable UPC/EAN

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Enable Code 39

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

20
 Symbology Settings

Disable Code 39

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Enable Code 93

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable Code 93

DM50 ● DM60 ● DM70 ● DM150 ● ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Interleaved 2 of 5

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000

*Disable Interleaved 2 of 5

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

21
 Symbology Settings

*Enable Codabar

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable Codabar

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Pharmacode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Pharmacode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Enable PDF417
(default for handheld readers)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

22
 Symbology Settings

*Disable PDF417
(default for fixed-mount readers)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Databar

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Databar

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Micro PDF417

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Micro PDF417

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

23
 Symbology Settings

Enable EAN.UCC Composite

DM50 ● DM60 ● DM70 ● DM150 ● ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable EAN.UCC Composite

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable POSTNET

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable POSTNET

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable PLANET

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

24
 Symbology Settings

*Disable PLANET

DM50 ● DM60 ● DM70 ● DM150 ●DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Japan Post

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Japan Post

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Australia Post

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Australia Post

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

25
 Symbology Settings

Enable UPU

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable UPU

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Intelligent Mail Barcode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Intelligent Mail Barcode

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

26
 2D Symbology Settings

2D Symbology Settings
Enable Extreme Print Growth
(Data Matrix only)

MX-1000 ● MX-1502

*Disable Extreme Print Growth

(Data Matrix only)

MX-1000 ● MX-1502

DataMatrix Symbol Difficulty - Easy

DM8600

*DataMatrix Symbol Difficulty - Medium

DM8600

DataMatrix Symbol Difficulty - Hard

DM8600

27
 2D Symbology Settings

*QR Symbol Difficulty - Easy

DM8600

QR Symbol Difficulty - Medium

DM8600

QR Symbol Difficulty - Hard

DM8600

28
 QR Code Maximum Grid Size

QR Code Maximum Grid Size

*Version 8 (49x49)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300●

DM360 ● DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

Version 9 (53x53)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

Version 10 (57x57)

DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●

DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

Version 12 (65x65)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

Version 16 (81x81)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

29
 QR Code Maximum Grid Size

Version 20 (97x97)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

Version 40 (177x177)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ●
MX-1000 ● MX-1502 ● DM8600 ● DM8050

30
 1D Symbology Settings

1D Symbology Settings
*Enable Use Target Decoding
(simulates laser scanning)
(default for handheld readers except for DM8000)

DM8000 ● MX-1000 ● MX-1502

*Disable Use Target Decoding

(simulates laser scanning)
(default for fixed mount readers, DM8000 and MX-1000 ●
MX-1502 )

DM8000 ● MX-1000 ● MX-1502

*Enable Short Quiet Zone

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Disable Short Quiet Zone

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Code Orientation: Omnidirectional

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

31
 1D Symbology Settings

Code Orientation: Ladder and Picket Fence

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Code Orientation: Ladder

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Code Orientation: Picket Fence

(for readers which support oriented 1-D reading)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

32
 Training

Training
Enable incremental training

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Disable incremental training

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable untrained symbologies

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Disable untrained symbologies

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

33
 Data Validation / Data Formatting

Data Validation / Data Formatting

Enable DoD UID Validation with UII Output

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable DoD UID Validation with UII Output

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Use Next Code As Match String

(Enable Match String Validation prior to reading this
code)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

Enable Input 1 Save Match String

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Disable Input 1 Save Match String

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

34
 Data Validation / Data Formatting

Enable Button Save Match String

DM150 ● DM260 ● DM300 ● DM360 ● DM470 ● DM503

*Disable Button Save Match String

DM150 ● DM260 ● DM300 ● DM360 ● DM470 ● DM503

35
 Non-Printable Characters

Non-Printable Characters
Enable Translate Unprintable Characters

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Translate Unprintable Characters

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

36
 Wireless

Wireless
Unassign Reader from Base Station

DM8000

Force Pairing Mode

DM8050, DM8600

Bluetooth Radio Power Low

DM8000 Base

Bluetooth Radio Power Medium

DM8000 Base

Bluetooth Radio Power High

DM8000Base

37
 Buffering

Buffering
*Enable Offline Buffering

DM8000 Wireless ● MX-1000

Disable Offline Buffering

DM8000 Wireless ● MX-1000

*Offline Buffering Mode - Multiple

DM8000 Wireless

Offline Buffering Mode - Single

DM8000 Wireless

38
 Power Management

Power Management
Disable Hibernation Mode

DM8000 Wireless ● MX-1000

*Enable Hibernation Mode

DM8000 Wireless ● MX-1000

Disable Power Off Mode

DM8000 Wireless ● MX-1000 ● MX-1502

Enable Power Off Mode

DM8000 Wireless ● MX-1000 ● MX-1502

Power Off Timeout (1 minute)

DM8000 Wireless ● MX-1000 ● MX-1502

39
 Power Management

Power Off Timeout (3 minutes)

DM8000 Wireless ● MX-1000 ● MX-1502

Power Off Timeout (15 minutes)

DM8000 Wireless ● MX-1000 ● MX-1502

Power Off Timeout (30 minutes)

DM8000 Wireless ● MX-1000 ● MX-1502

40
 Wake-up Message

Wake-up Message
Enable Output Diagnostic String on Wake-up

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

*Disable Output Diagnostic String on Wake-up

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 ● MX-1000 ● MX-
1502

41
 PS/2 Keyboard Emulation Enable

PS/2 Keyboard Emulation Enable

PS/2 Keyboard Emulation Enable

DM50 ● DM70 ● DM8000

DO NOT SCAN this code when you have an actual
keyboard connected.

*PS/2 Keyboard Emulation Disable

DM50 ● DM70 ● DM8000

Base Station PS/2 Keyboard Emulation Enable

DM8000Base
DO NOT SCAN this code when you have an actual
keyboard connected.

Base Station PS/2 Keyboard Emulation Disable

DM8000Base

42
 ASCII Keyboard Command Codes

ASCII Keyboard Command Codes

1. Set the data formatting on the DataMan to "Full String".
2. Put the reader into keyboard mode and scan the code. The DataMan will execute this command.

ENTER
main ENTER, not numeric keypad ENTER

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ESCAPE

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

BACKSPACE

DM50 ● DM60 ● DM8000 ● DM8000Base

TAB

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+A
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+B
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+C
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+D
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+E
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+G
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

43
 ASCII Keyboard Command Codes

ALT+H
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+I
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+J
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+K
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+L
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+M
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+N
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+O
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+P
specifically the left ALT ke

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+Q
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+R
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+S
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

44
 ASCII Keyboard Command Codes

ALT+T
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+U
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+V
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+W
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+X
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+Y
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+Z
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

PRINTSCREEN

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F1

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F2

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F3

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F4

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

45
 ASCII Keyboard Command Codes

F5

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F6

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F7

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F8

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F9

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F10

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

HOME

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ARROW UP

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

PAGE UP

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ARROW LEFT

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ARROW RIGHT

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

END

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

46
 ASCII Keyboard Command Codes

ARROW DOWN

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

PAGE DOWN

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

INSERT

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

DELETE

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

GUI LEFT

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

GUI RIGHT

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F1
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F2
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F3
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F4
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F5
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F6
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

47
 ASCII Keyboard Command Codes

ALT+F7
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F8
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F9
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F10
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F11

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

F12

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F11
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+F12
specifically the left ALT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

ALT+ENTER
specifically the left ALT key and main ENTER

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+A
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+B
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+C
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

48
 ASCII Keyboard Command Codes

CTRL+D
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+E
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+G
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+H
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+I
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+J
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+K
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+L
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+M
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+N
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+O
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

49
 ASCII Keyboard Command Codes

CTRL+P
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+Q
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+R
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+S
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+T
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+U
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+V
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+W
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+X
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+Y
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+Z
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F1
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

50
 ASCII Keyboard Command Codes

CTRL+F2
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F3
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F4
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F5
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F6
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F7
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F8
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F9
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F10
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F11
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+F12
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

CTRL+ENTER
specifically the right CTRL key and main ENTER

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

51
 ASCII Keyboard Command Codes

CTRL
specifically the right CTRL key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F1
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F2
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F3
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F4
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F5
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F6
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F7
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F8
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F9
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F10
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+F11
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

52
 ASCII Keyboard Command Codes

SHIFT+F12
specifically the left SHIFT key

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

SHIFT+ENTER
specifically the left SHIFT key and main ENTER

DM50 ● DM60 ● DM70 ● DM8000 ● DM8000Base

53
 iOS Keyboard Configuration

iOS Keyboard Configuration

Enable iOS Keyboard Emulation

MX-1000 ● MX-1502

Disable iOS Keyboard Emulation

MX-1000 ● MX-1502

Set iOS Keyboard Warm-Up Time to 300ms

MX-1000 ● MX-1502

Set iOS Keyboard Warm-Up Time to 500ms

MX-1000 ● MX-1502

Set iOS Keyboard Warm-Up Time to 1000ms

MX-1000 ● MX-1502

54
 USB Connection

USB Connection
*USB-COM/RS-232

DM50 ● DM60 ● DM70 ● DM150 ● DM8000 ● MX-1000 ●

MX-1502

USB Keyboard

DM50 ● DM60 ● DM70 ● DM150 ● DM8000 ● MX-1000 ●

MX-1502

Enable USB Keyboard for the base station

Reboot needed for enabling USB keyboard for the base

station!

DM8000Base

*Disable USB Keyboard for the base station

Reboot needed after disabling USB keyboard for the

base station!

DM8000Base

Enable ‘Enumerate in HID mode only’

Reboot needed for changing between HID and USB

mode of base/reader!

DM8000Base

55
 USB Connection

Disable ‘Enumerate in HID mode only’

Reboot needed for changing between HID and USB

mode of base/reader!

DM8000Base

*Enable Base USB

Reader switches to USB when in the base.

DM8000Base

Disable Base USB

Reader keeps up WiFi even when in the base.

DM8000Base

Enable Re-enumeration on Firmware Start

DM50 ● DM60 ● DM70 ● DM150

Disable Re-enumeration on Firmware Start

DM50 ● DM60 ● DM70 ● DM150

56
 USB Connection

DTR Assertion Required for USB communication

DM8050

DTR Assertion Not Required for USB communication

DM8050

57
 USB Mode

USB Mode
USB compatibility mode enabled

DM50 ● DM70 ● DM8000

*USB compatibility mode disabled

DM50 ● DM70 ● DM8000

USB compatibility mode enabled

DM8000Base

USB compatibility mode disabled

DM8000Base

USB 2.0 mode

DM50 ● DM70 ● DM150 ● DM8000

58
 USB Mode

*USB 1.1 mode

DM50 ● DM70 ● DM150 ● DM8000

USB 2.0 mode on base station

DM50 ● DM70 ● DM150 ● DM8000Base

*USB 1.1 mode on base station

DM50 ● DM70 ● DM150 ● DM8000Base

Android Mode
(default)

MX-1000 ● MX-1502

iOS Mode

MX-1000 ● MX-1502

59
 Communication Settings

Communication Settings
*Enable DHCP
(default for all Ethernet readers)

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000

DO NOT SCAN this code with a DM8000 wireless

reader!
Enable Multi-Port (RS-232 Sharing)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

*Disable Multi-Port (RS-232 Sharing)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503

Enable EtherNet/IP

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ●

DM470 ● DM8000 (corded)

Enable EtherNet/IP

DM8000Base (DM8000 wireless)

60
 Communication Settings

*Disable EtherNet/IP

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

*Disable EtherNet/IP

DM8000Base (DM8000 wireless)

Enable PROFINET

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

Enable PROFINET

DM8000Base (DM8000 wireless)

*Disable PROFINET

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

61
 Communication Settings

*Disable PROFINET

DM8000Base (DM8000 wireless)

Enable SLMP Protocol

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

Enable SLMP Protocol

DM8000Base (DM8000 wireless)

*Disable SLMP Protocol

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

*Disable SLMP Protocol

DM8000Base (DM8000 wireless)

62
 Communication Settings

Enable Modbus TCP

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

Enable Modbus TCP

DM8000Base (DM8000 wireless)

*Disable Modbus TCP

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000 (corded)

*Disable Modbus TCP

DM8000Base (DM8000 wireless)

63
 RS-232 Baud Rate

RS-232 Baud Rate

9600 BPS

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

9600 BPS

DM8000Base (DM8000 wireless)

19200 BPS

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

19200 BPS

DM8000Base (DM8000 wireless)

38400 BPS

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

64
 RS-232 Baud Rate

38400 BPS

DM8000Base (DM8000 wireless)

*57600 BPS
(default for DMAE50, DM300, DM360, DM470 and
DM8000)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

57600 BPS

DM8000Base (DM8000 wireless)

*115200 BPS
(default for DM50, DM60, DM70, DM150, DM260, and
DM503)

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8050 ● DM8600

65
 RS-232 Parity Settings

RS-232 Parity Settings

None

All readers

None

DM8000Base (DM8000 wireless)

Odd

All readers

Odd

DM8000Base (DM8000 wireless)

Even

All readers

66
 RS-232 Parity Settings

Even

DM8000Base (DM8000 wireless)

Mark

DM8050 ● DM8600

Mark

DM8000Base (DM8000 wireless)

Space

DM8050 ● DM8600

Space

DM8000Base (DM8000 wireless)

67
 RS-232 Databit Settings

RS-232 Databit Settings

Databit 7

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

Databit 7

DM8000Base (DM8000 wireless)

Databit 8

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

Databit 8

DM8000Base (DM8000 wireless)

68
 RS-232 Stopbit Settings

RS-232 Stopbit Settings

Stopbit 1

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

Stopbit 1

DM8000Base (DM8000 wireless)

Stopbit 2

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000 (corded)

Stopbit 2

DM8000Base (DM8000 wireless)

69
 RS-232 Handshaking

RS-232 Handshaking
*RTS/CTS Off

DM8000 (corded)

RTS/CTS Off

DM8000Base (DM8000 wireless)

RTS/CTS On

DM8000 (corded)

RTS/CTS On

DM8000Base (DM8000 wireless)

70
 RS-232 Routing

RS-232 Routing
*Route to associated reader

DM8000 (wireless)

Route to base station

DM8000 (wireless)

71
 Network Settings

Network Settings
Enable Network Client

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000

*Disable Network Client

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503 ● DM8000

72
 Decode Settings

Decode Settings
*Never Read the Same Code Twice Off

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000

Never Read the Same Code Twice On

DM50 ● DM60 ● DM70 ● DM150 ● DM260 ● DM300 ●

DM360 ● DM470 ● DM503 ● DM8000

73
 Master / Slave

Master / Slave
Enable MST

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503

*Disable MST

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503

Select Reader as Master

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503

Deselect Reader as Master

DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM470 ●

DM503

74
 Keyboard Country

Keyboard Country
*USA

DM50 ● DM70 ● DM8000

*USA

DM8000Base (DM8000 wireless)

Germany

DM50 ● DM70 ● DM8000

Germany

DM8000Base (DM8000 wireless)

France

DM50 ● DM70 ● DM8000

75
 Keyboard Country

France

DM8000Base (DM8000 wireless)

Spain

DM50 ● DM70 ● DM8000

Spain

DM8000Base (DM8000 wireless)

Japan

DM50 ● DM70 ● DM8000

Japan

DM8000Base (DM8000 wireless)

76
 Keyboard Country

Norway

DM50 ● DM70 ● DM8000

Norway

DM8000Base (DM8000 wireless)

Finland

DM50 ● DM70 ● DM8000

Finland

DM8000Base (DM8000 wireless)

Alt Key Combo

DM50 ● DM70 ● DM8000

Alt Key Combo

DM8000Base (DM8000 wireless)

77
 Alt Key Combo Zero Padding

Alt Key Combo Zero Padding

*Enable Alt Key Combo Zero Padding

DM50 ● DM70 ● DM8000

*Enable Alt Key Combo Zero Padding

DM8000Base (DM8000 wireless)

Disable Alt Key Combo Zero Padding

DM50 ● DM70● DM8000

Disable Alt Key Combo Zero Padding

DM8000Base (DM8000 wireless)

78
 USB Keyboard Inter-Character Delay

USB Keyboard Inter-Character Delay

*100 ms OFF

DM50 ● DM70 ● DM8000

100 ms ON

DM50 ● DM70 ● DM8000

*0 ms OFF

DM8000Base

100 ms ON

DM8000Base

79
 Copyright © 2018
Cognex Corporation. All Rights Reserved.