Potain Igo T 85 A

Product Guide

Features

• 6000 kg (13,228 lb) maximum capacity

• 1400 kg (3086 lb) capacity at 45 m (148 ft)

• 45 m (148 ft) maximum operating hook radius

• 51 m (167 ft) maximum hook height with 45 m (148 ft) jib

set at 30°

• 38 m (125 ft) maximum tip hook height with

jib horizontal

• Variable height lattice mast from 20 m (66 ft) to 38 m

(125 ft) with optional mast inserts

FEM 1.001-A3
EN 14439 C25
 Features

Cab
The optional UltraView cab bolts onto the crane at a fixed
height. Controls are integrated into the cab and operator’s seat
provides ergonomic comforts from an aerial position.

Optional hydraulic ballasting derrick

The optional hydraulic ballasting derrick arm is removeable
and controlled by the radio remote control. This derrick can
be adjusted to both radii of the Igo T 85 A as well as the
radius of the Igo T 70 A.

Remote control with indicators

Standard wireless radio remote control with
indicators and auxiliary control unit can be
supplemented with an optional tethered joystick
control unit with 30 m (98 ft) cable.

Mast inserts
Increase your working height by up to 15 m
(49 ft) with optional mast inserts. Each insert
is 6 m (20 ft) and provides the operator with
additional heights under hook.

North American Highway Axle

Simplify road transport with the North American High-
way Axle and adaptation kit 203. Multiple pin positions
for optimal weight distribution, DOT compliance and an
optional attachable 3rd axle make this an ideal solution
for your transportation needs.

2
 Contents

Specifications 4
Transport 5
Weights 6
Dimensions 7
Crane profile 8
Load charts 9
Mechanisms 10
Metric dimension 11
Metric crane profile 12
Metric load charts 13
Metric mechanisms 14
Symbols glossary 15
 Specifications
Jib
Jib Controls
Controls

45 m (148 ft) radius standard tri-folding offsettable lattice Wireless remote control provides information to the operator
jib. Two (2) tie bar lines with adjustable lengths allow jib to about **wind speed, radius, hook height, load, and moment.
be offset up to 30˚. Opening and aligning are carried out Lights and buzzers alert the operator when nearing limits
automatically by three (3) hydraulic cylinders. of operation. Battery charger and extra battery are provided
with crane.
Mast Auxiliary remote attached by umbilical cord ensures
continual operation in case of battery or other malfunction
Telescoping lattice mast raised by one (1) hydraulic cylinder. of the wireless remote control.
Hook heights of 20 m (66 ft) and 23 m (75 ft) achievable
with standard mast. 360 ˚ rotation possible during raising Swing
Swing
sequence.
RVF 151 Optima + slewing mechanism with maximum
*Optional mast inserts swing speed of 0.8 rpm. Progressive control of speed with
counter-slewing possible, anti-load swinging system makes
Three (3) 6 m (20 ft) mast inserts available to reach aligning the load and jib easier. Multiple rpm speeds possible
a maximum horixontal hook height of 38 m (125 ft). depending upon parameter selected.
Increasing mast height with one insert provides hook heights
of 26 m (85 ft) and 29 m (95 ft); second mast insert provides Hoist
Hoist
hook heights of 32 m (105 ft) and 35 m (115 ft); third mast
insert provides a hook height of 38 m (125 ft). 20 LVF 15 Optima: 20 HP variable frequency hoist with
1,5 t (1.7 USt) line pull. 3 notch, progressive speed change
Chassis
Chassis according to the accelerating or decelerating ramps. Optima
allows the hoist to adapt its speed to the weight of the load.
Outriggers swing and lock into position. 4,5 m (14.8 ft)
square outrigger spread with 3,3 m (10.8 ft) maximum Trolley
Trolley
turning radius. Outrigger pads are stowed on the crane
during transport (600 mm x 600 mm [23.6 in x 23.6 in]). 5 DVF 5: 5.5 HP variable frequency hoist with 500 kg
(1102 lb) line pull. 3 notch winch, progressive speed change
*Ballast
Ballast according to acceleration or deceleration ramps controlled by
the frequency converter.
Ballast requirement for the crane consists of, at minimum,
fifteen (15) slabs each weighing 2200 kg (4850 lb). An Hydraulic
Hydraulic equipment
additional slab is required if the cab or a mast insert(s) is Equipment
used. Hydraulic cylinders are used for raising the mast, unfolding
the jib, and slewing the derrick. All actions are carried about
*Optional hydraulic
Ballasting Derrick by the remote control.
ballasting derrick
Removable and able to be used on other Igo T 85 A and *Optional transport axle sets
Igo T 70 A units, the hydraulic ballasting derrick uses the
hoisting winch and is controlled by the remote control. Axle sets are available for both jobsite and highway
applications. Jobsite axles are rated at either 10 km/h
Electrical (6 mph) or 25 km/h (15.5 mph); highway axle set is rated at
Electrical
Requirement requirement 80 km/h (50 mph)
480 volt, 60 Hz measured at the turntable. Earth rod and
electric cable stored on the crane during transport. *Optional equipment

* STANDARD NORTH AMERICAN SPECIFICATION:

Reeving
Reeving
includes offsettable jib, pre-equipment for interference
system, Top Zone, 3 mast inserts and 17 counterweight
SM/DM block for 2 (SM) or 4-part line (DM). Manual slabs.
removal of one pin to change between SM and DM. Pure * Mast inserts 6 m (20 ft)
SM1 (section of hookblock removed) is possible with gain of
150 kg (331 lb) lifting capacity. * Fixed height UltraView cab
* Access ladders
Anemometer * Transport axles and kits
*Optional Anemometer
* Top Zone
Electronic wind speed meter to alert the operator of wind * Top Tracing II
speed conditions. Provides selective display on the radio * Dialog Wind
remote. Maximum in service wind speed is 72 km/h
(45 mph) and maximum out of service wind speed is
150 km/h (93 mph). *Denotes optional equipment
4 **Requires optional anemometer
 Transport
DJ100 / S120
10 km/h / 6 mph

16,65 m (54.6 ft)

15,65 m (51.3 ft) 2,5 m (8.2 ft)

3,7 m (12.1 ft)

0,3 m (1.0 ft)

3,78 m (12.4 ft) 3,77 m (12.4 ft) 5,2 m (17.1 ft) 2,4 m (7.9 ft)

P2 P P1

SL122 / J215M
80 km/h / 50 mph

15,65 m (51.3 ft) 2,5 m (8.2)

4 m (13.1 ft)

1,2 m (3.9 ft) 0,6 m (2.0 ft)

1,98 m (6.5 ft) 4,69 m (15.4 ft) 3,21 m (10.5 ft) 5,77 m (18.9 ft) 2,45 m (8 ft)

P2 P P1

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

Potain Igo T 85 A 5
 Weights
North American Highway Axle

15,65 m (51.3 ft) 2,5 m (8.2)

4 m (13.1 ft)

1,2 m (3.9 ft) 0,6 m (2.0 ft)

1,98 m (6.5 ft) 4,69 m (15.4 ft) TBA TBA 2,6 m (8.5 ft)

P2 P P1

*Other axle sets are available.

Chassis data (in transort position)

DJ100/S120 SL122/J215M North American
10 km/h (6 mph) 80 km/h (50 mph) Highway Axle
meters (feet) meters (feet) meters (feet)
Overall length 16,65 54.6 15,65 51.3 15,65 51.3
Overall height 3,7 12.1 4,0 13.1 4,0 13.1
Overall width 2,5 8.2 2,5 8.2 2,6 8.5
Overhang 5,2 17.1 5,8 18.9 TBA TBA

Weights
Crane weight 18 100 kg 39,904 lb
less counterweight:
Counterweight 33 000 kg 72,753 lb
for operation:
Crane with counterweight: 51 100 kg 112,656 lb

Crane with transport equipment

DJ100/S120 SL122/J215M North American
10 km/h (6 mph) 80 km/h (50 mph) Highway Axle
In transport with kilograms (pounds) kilograms (pounds) kilograms (pounds)
no counterweight:
Gross (P) 19 360 42,681 21 050 46,407 TBA TBA
Rear (P1) 11 491 25,333 15 075 33,234 TBA TBA
Front (P2) 7869 17,869 5975 13,172 TBA TBA

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

6
 Dimensions

H (ft)
-
H+3 -
-
H+2 167
157
H+1 148
138
H+0 -

5.1 ft

1 2 3
1 51 ft 111 ft 131 ft 148 ft
2 46 ft 5512 lb 3968 lb 3086 lb
3 42 ft
10.2 ft H (ft)
13,228 lb -
H (ft) H+3 125
- 115
H+3 118 H+2 105
108 95
H+2 98 H+1 85
89 75
H+1 79 H+0 66
69 104 ft
H+3 H+0 52 ft
59 2750 kg
6063 lb
136 ft 13,228 lb

105 ft
45 ft
8.7 ft 5071 lb
13,228 lb
R = 10.8 ft

F1 40.7 USt 35.3 USt

17.1 ft
F1 39,904 lb
82,450 lb
14.8 ft x 14.8 ft (17 x 4850 lb)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Potain Igo T 85 A The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 7
 Crane profile

171 ft 177 ft
164 171
157 164
151 157
144 151
138 144
131 138
125 131
125
118
118
112
112
105
105
98
98
92
92
85
85
79 79
72 72
66 66
59 59
52 52
46 46
39 39
33 33
26 26
20 20
13 13
7 7
0 0
26 20 13 7 0 7 13 20 2633 39 46 52 59 66 72 79 85 92 98 105112 118 125131 138144151 157 ft 26 20 13 7 0 7 13 20 2633 39 46 52 59 66 72 79 85 92 98 105112 118 125131 138144151 157 ft

Jib raised 30°

Igo T 85 A: jib raised 30°
184 ft
177
H +2
171
164
157 H +1
151
144 H +0
138
131
125
118
112
105
98
92
85
79
72
66
59
52
46
39
33
26
20
13
7
0
26 20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 112 118 125 131 138 144 151 ft

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
8 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 Load charts

104 ft 110 ft 131 ft 148 ft 105 ft

6063 lb 5512 lb 3968 lb 3086 lb 5071 lb

148 ft 10 42 46 52 59 66 73 78 79 85 92 98 105 112 118 125 131 138 148 ft

13228 11685 9921 8598 7496 6614 - 6063 5512 5071 4630 4299 3968 3638 3417 3197 2976 2756 lb
6614 - 6063 5512 5071 4630 4299 3968 3638 3417 3197 2976 2756 lb
6614 6504 5952 5401 4960 4630 4299 4079 3748 3527 3307 3086 lb 148 ft
131 ft
131 ft 10 46 52 59 66 72 81 85 85 92 98 105 112 118 125 131 ft
111 ft
13228 11023 9700 8378 7496 6614 - 6173 5622 5181 4850 4409 4189 3858 3638 lb 104 ft
6614 - 6173 5622 5181 4850 4409 4189 3858 3638 lb
115
6614 6614 6063 5622 5181 4850 4519 4189 3968 lb H+2
105
111 ft 10 51 59 66 72 79 85 91 95 98 105 111 ft 95
13228 11023 9700 8598 7716 7055 6614 - 5952 5512 5181 lb H+1
85
6614 - 5952 5512 5181 lb 75
6614 6283 5842 5512 lb H+0
66
104 ft 10 52 59 66 72 79 85 92 96 98 104 ft
13228 11244 9921 8818 7937 7275 6614 - 6173 5732 lb
6614 - 6173 5732 lb
6614 6504 6063 lb

148 ft 10 45 52 59 66 72 79 84 92 98 105 ft
131 ft 13228 11023 9480 8378 7496 6614 - 5622 5181 4740 lb
6614 - 5622 5181 4740 lb
6614 5952 5512 5071 lb

128 ft 148 ft 131 ft 111 ft 104 ft

3086 lb H+2 167 159 - -
114 ft 157 149 - -
H (ft) H+1
3968 lb 148 139 129 126
96 ft H+0 138 130 119 116
91 ft 5512 lb

6063 lb
148 ft 10 64 68 72 79 85 92 98 105 112 118 125 128 ft
30° 6614 - 5732 5181 4630 4189 3858 3527 3307 3086 2866 2756 lb
6614 6173 5512 5071 4630 4189 3968 3638 3417 3197 3086 lb
131 ft 10 70 74 79 85 92 98 105 114 ft
6614 - 5732 5181 4740 4409 4079 3638 lb
6614 6173 5622 5071 4740 4409 3968 lb
111 ft 10 79 82 85 92 96 ft
6614 - 5952 5512 5181 lb
6614 6393 5842 5512 lb
104 ft 10 80 84 85 91 ft
6614 - 6173 5732 lb
6614 6504 6063 lb

148 ft
131 ft
-
91 ft H+1
126
5071 lb H+0 116
H (ft)
148 ft 10 70 73 79 85 91 ft
30°
131 ft 6614 - 5732 5181 4740 lb
6614 6063 5512 5071 lb

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Potain Igo T 85 A The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 9
 Mechanisms

104 ft 111 ft 131 ft 148 ft

4740 lb 4189 lb 2646 lb 1764 lb

148 ft 10 54 59 66 72 79 85 92 98 105 112 118 125 131 138 144 148 ft 148ft
6614 5952 5181 4630 4189 3748 3417 3086 2866 2646 2425 2205 2094 1940 1830 1764 lb 131 ft
111 ft
131 ft 10 64 66 72 79 85 92 98 105 112 118 125 131 ft
104 ft
6614 6393 5732 5071 4630 4189 3858 3527 3307 3086 2866 2646 lb
-
111 ft 10 76 79 85 92 98 105 111 ft H+3
125
6614 6393 5732 5291 4850 4519 4189 lb
104 ft 10 79 85 92 98 104 ft
6614 6063 5512 5071 4740 lb

148 ft
105 ft 131 ft 10 67 72 79 85 92 98 105 ft
6614 5952 5401 4850 4409 4079 3748 lb
3748 lb

480 V - 60 Hz hp kW

20 LVF 15 fpm 11 56 95 180 226 5 28 48 90 113

20 15
Optima lb 6614 6614 6614 3307 1653 13228 13228 13228 6614 3307

49 - 98 - 131 (4409  13,228 lb)

5 DVF 5 fpm 5.5 4
49 - 98 - 180 (0  4409 lb)

RVF 151
rpm 0  0.8 5.5 4
Optima+

TVF 324 fpm 82 2x4 2x3

IEC 60204-32

 22 kVA
480 V (+6% -10%) 60 Hz
 25 kVA

20 LVF 15 Optima
fpm
+25 %
226
180

95

0
0 1653 3307 6614 lb

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 Metric dimensions

H (m)
-
H+3 -
-
H+2 51
48
H+1 45
42
H+0 -

1,56 m

1 2 3
1 15,4 m 33,8 m 40 m 45 m
2 13,9 m 2500 kg 1800 kg 1400 kg
3 12,7 m
3,1 m H (m)
6000 kg -
H (m) H+3 38
- 35
H+3 36 H+2 32
33 29
H+2 30 H+1 26
27 23
H+1 24 H+0 20
21 31,7 m
H+3 H+0 15,7 m
18 2750 kg
41,5 m 6000 kg

32 m
13,7 m
2,65 m 2300 kg
6000 kg
R = 3,3 m

F1 36,9 t 32 t

18100 kg
5,22 m
37400 kg
F1 (17 x 2200 kg)

4,5 m x 4,5 m

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Potain Igo T 85 A The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 11
 Metric crane profile

54 m 52 m
52 50
50 48
48 46
46 44
44 42
42
40
40
38
38
36
36
34
34
32
32
30
30
28
28
26 26
24 24
22 22
20 20
18 18
16 16
14 14
12 12
10 10
8 8
6 6
4 4
2 2
0 0
8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 m 8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 m

Jib raised 30°

Igo T 85 A: jib raised 30°

56 m
54
H +2
52
50
48 H +1
46
44 H +0
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 m

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 Metric load charts

31,7 m 33,8 m 40 m 45 m 32 m
2750 kg 2500 kg 1800 kg 1400 kg 2300 kg

45 m 3,1 12,7 14 16 18 20 22,4 23,7 24 26 28 30 32 34 36 38 40 42 45 m

6000 5300 4500 3900 3400 3000 - 2750 2500 2300 2100 1950 1800 1650 1550 1450 1350 1250 kg
3000 - 2750 2500 2300 2100 1950 1800 1650 1550 1450 1350 1250 kg
3000 2950 2700 2450 2250 2100 1950 1850 1700 1600 1500 1400 kg 45 m
40 m
40 m 3,1 13,9 16 18 20 22 24,6 25,9 26 28 30 32 34 36 38 40 m
33,8 m
6000 5000 4400 3800 3400 3000 - 2800 2550 2350 2200 2000 1900 1750 1650 kg 31,7 m
3000 - 2800 2550 2350 2200 2000 1900 1750 1650 kg
35
3000 3000 2750 2550 2350 2200 2050 1900 1800 kg H+2
32
33,8 m 3,1 15,4 18 20 22 24 26 27,6 28,9 30 32 33,8 m 29
6000 5000 4400 3900 3500 3200 3000 - 2700 2500 2350 kg H+1
26
3000 - 2700 2500 2350 kg 23
3000 2850 2650 2500 kg H+0
20
31,7 m 3,1 15,7 18 20 22 24 26 28,1 29,4 30 31,7 m
6000 5100 4500 4000 3600 3300 3000 - 2800 2600 kg
3000 - 2800 2600 kg
3000 2950 2750 kg

45 m 3,1 13,7 16 18 20 22 24,1 25,5 28 30 32 m

40 m 6000 5000 4300 3800 3400 3000 - 2550 2350 2150 kg
3000 - 2550 2350 2150 kg
3000 2700 2500 2300 kg

45 m 40 m 33,8 m 31,7 m

39 m H+2 51 48,5 - -
1400kg 48 45,5 - -
H+1
34,8 m 45 42,5 39,4 38,4
H (m)
1800 kg H+0 42 39,5 36,4 35,4
29,3 m

27,6 m 2500 kg

2750 kg 45 m 3,1 19,6 20,7 22 24 26 28 30 32 34 36 38 39 m

3000 - 2600 2350 2100 1900 1750 1600 1500 1400 1300 1250 kg
30°
3000 2800 2500 2300 2100 1900 1800 1650 1550 1450 1400 kg
40 m 3,1 21,4 22,5 24 26 28 30 32 34,8 m
3000 - 2600 2350 2150 2000 1850 1650 kg
3000 2800 2550 2300 2150 2000 1800 kg
33,8 m 3,1 24 25,1 26 28 29,3 m
3000 - 2700 2500 2350 kg
3000 2900 2650 2500 kg
31,7 m 3,1 24,5 25,6 26 27,6 m
3000 - 2800 2600 kg
3000 2950 2750 kg

45 m
27,6 m
40 m
2300 kg -
H+1
H (m) 38,4
30° 45 m 3,1 21,2 22,2 24 26 27,6 m H+0 35,4
40 m 3000 - 2600 2350 2150 kg
3000 2750 2500 2300 kg

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Potain Igo T 85 A The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 13
 Metric mechanisms

31,7 m 33,8 m 40 m 45 m
2150 kg 1900 kg 1200 kg 800 kg

45 m 3,1 16,6 18 20 22 24 26 28 30 32 34 36 38 40 42 44 45 m 45 m
3000 2700 2350 2100 1900 1700 1550 1400 1300 1200 1100 1000 950 880 830 800 kg 40 m
33,8 m
40 m 3,1 19,5 20 22 24 26 28 30 32 34 36 38 40 m
31,7 m
3000 2900 2600 2300 2100 1900 1750 1600 1500 1400 1300 1200 kg
-
33,8 m 3,1 23,3 24 26 28 30 32 33,8 m H+3
38
3000 2900 2600 2400 2200 2050 1900 kg
31,7 m 3,1 24,1 26 28 30 31,7 m
3000 2750 2500 2300 2150 kg

45 m
32 m 40 m 3,1 20,3 22 24 26 28 30 32 m
1700 kg 3000 2700 2450 2200 2000 1850 1700 kg

480 V - 60 Hz hp kW

20 LVF 15 m/min 3,3 17 29 55 69 1,6 8,5 14,5 27,5 34,5

20 15
Optima kg 3000 3000 3000 1500 750 6000 6000 6000 3000 1500

15 - 30 - 40 (2000  6000 kg)

5 DVF 5 m/min 5,5 4
15 - 30 - 55 (0  2000 kg)

RVF 151
rpm 0  0,8 5,5 4
Optima+

TVF 324 m/min 25 2x4 2x3

IEC 60204-32

 22 kVA
480 V (+6% -10%) 60 Hz
 25 kVA

20 LVF 15 Optima
m/min +25 %
69
55

29

0
0 750 1500 3000 kg

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
 Symbols glossary

Anemometer Jib Reactions out of service

R Slewing radius

Ballast Mast Reeving Standard equipment

Optional hyrdaulic
Chassis Reeving 2-part Total ballast weight
ballasting derrick

Controls Optional mast inserts Reeving 4-part Traveling

Electrical equipment Optional transport axle sets Required power Trolleying

Weight without load,

Hoisting Options Slewing without ballast, without
transport axles, with max.
jib and standard height

Hydraulic equipment Reactions in service

Potain Igo T 85 A 15
Manitowoc Cranes

Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Dardilly, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering
progress make it necessary that we reserve the right to make specification, equip-
Brazil ment, and price changes without notice. Illustrations shown may include optional
Alphaville Chengdu equipment and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
France Sydney
Wilhelmshaven
Baudemont India
India
Cergy Chennai
Pune
Decines Delhi
Italy
Germany Hyderabad
Niella Tanaro
Langenfeld Pune
Portugal
Italy Korea
Baltar
Lainate Seoul
Fânzeres
Netherlands Philippines
USA
Breda Makati City
Manitowoc
Poland Singapore
Port Washington
Warsaw
Shady Grove
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

©2014 Manitowoc
Form No. Igo T 85 A PG
Part No. 11-002-1M-0814 www.manitowoccranes.com