1

Chapter 5

Capacitance and Inductance

© Niwareeba Roland
 2

Learning goals
 By the end of this chapter, the students should be able to:
 Use circuit models for inductors and capacitors to calculate
voltages, currents, and powers.
 Determine the stored energy in capacitors and inductors.
 Apply the concepts of continuity of current for an inductor
and continuity of voltage for a capacitor.
 Calculate the voltages and currents for capacitors and
inductors in electric circuits with dc sources.
 Determine the equivalent capacitance for capacitors in
series and parallel.
 Determine the equivalent inductance for inductors in series
and parallel
© Niwareeba Roland
 3

Capacitors
 A capacitor is a circuit element that consists of two
conducting surfaces separated by a nonconducting, or
dielectric, material. A simplified capacitor and its
electrical symbol are shown in Fig. below.

© Niwareeba Roland
 4

Capacitors
 The capacitance of two parallel plates of area A,
separated by distance d, is
𝜀0 𝐴
𝐶=
𝑑
 Where
𝜀0 = 8.85 × 10−12 𝐹/𝑚 (𝑃𝑒𝑟𝑚𝑖𝑡𝑡𝑖𝑣𝑖𝑡𝑦 𝑜𝑓 𝑓𝑟𝑒𝑒 𝑠𝑝𝑎𝑐𝑒)
 Suppose now that a source is connected to the
capacitor shown in Fig. above; then positive charges will
be transferred to one plate and negative charges to the
other. The charge on the capacitor is proportional to the
voltage across it such that
 𝑄 = 𝐶𝑣
© Niwareeba Roland
 5

Capacitors
 where C is the proportionality factor known as the
capacitance of the element in farads.
 The charge differential between the plates creates
an electric field that stores energy.
𝑑𝑞
 Since the current is 𝑖 = , For the capacitor, 𝑖 =
𝑑𝑡
𝑑 𝑑𝑣
𝐶𝑣 whichfor a constant C is 𝑖 = 𝐶
𝑑𝑡 𝑑𝑡

© Niwareeba Roland
 6

Capacitors
 Which can be rewritten as
1
 𝑑𝑣 = 𝑖 𝑑𝑡
𝐶
 Integrating gives
1 𝑡
𝑣 𝑡 = 𝑖 𝑥 𝑑𝑥
𝐶 −∞
 The energy stored in the capacitor can be derived from
the power that is delivered to the element. This power is
given by the expression
𝑑𝑣(𝑡)
𝑝 𝑡 =𝑣 𝑡 𝑖 𝑡 = 𝐶𝑣(𝑡)
𝑑𝑡

© Niwareeba Roland
 7

Capacitors
 And hence the energy stored in the electric field is
𝑡 𝑑𝑣(𝑥) 𝑣(𝑡)
 𝑤𝑐 𝑡 = −∞
𝐶𝑣(𝑥) 𝑑𝑥 =𝐶 −𝑣(∞)
𝑣(𝑥)𝑑𝑣(𝑥) =
𝑑𝑥
𝑣 𝑡
1 1
𝐶𝑣 2 𝑥 |𝑣(−∞) = 𝐶𝑣 2 𝑡
2 2
 The expression for the energy can be written as
1 𝑞2 𝑡
 𝑤𝑐 𝑡 =
2 𝐶
 These equations represent the energy stored by the
capacitor, which, in turn, is equal to the work done
by the source to charge the capacitor.
© Niwareeba Roland
 8

Capacitors
 Now let’s consider the case of a dc voltage applied
across a capacitor. The current flowing through the
capacitor is directly proportional to the time rate of
change of the voltage across the capacitor.
 A dc voltage does not vary with time, so the current
flowing through the capacitor is zero.
 We can say that a capacitor is “an open circuit to dc” or
“blocks dc.” Capacitors are often utilized to remove or
filter out an unwanted dc voltage.
 In analyzing a circuit containing dc voltage sources and
capacitors, we can replace the capacitors with an open
circuit and calculate voltages and currents in the circuit
using our many analysis tools. © Niwareeba Roland
 9

Capacitors
 Exercise
 If the charge accumulated on two parallel
conductors charged to 12 V is 600 pC, what is the
capacitance of the parallel conductors? (50 pF)
 A 10-μF capacitor has an accumulated charge of
500 nC. Determine the voltage across the capacitor.
(0.05 V)

© Niwareeba Roland
 10

Inductors
 An inductor is a circuit element that consists of a
conducting wire usually in the form of a coil. Two
typical inductors and their electrical symbol are shown
in Fig. below.

Two inductors and their electrical symbol

© Niwareeba Roland
 11

Inductors
𝑑𝑖(𝑡)
𝑣 𝑡 = 𝐿
𝑑𝑡
 The constant of proportionality L is called the inductance
and is measured in the unit henry,
 The expression for the current in an inductor is
1 𝑡
𝑖 𝑡 = −∞
𝑣 𝑥 𝑑𝑥
𝐿
 Which can also be written as
1 𝑡
 𝑖 𝑡 = 𝑖 𝑡0 + 𝑣 𝑥 𝑑𝑥
𝐿 𝑡0
 The power delivered to the inductor can be used to
derive the energy stored in the element.
© Niwareeba Roland
 12

Inductors
 This power is equal to
𝑑𝑖 𝑡
𝑝 𝑡 =𝑣 𝑡 𝑖 𝑡 = 𝐿 𝑖(𝑡)
𝑑𝑡
 Therefore, the energy stored in the magnetic field is
𝑡 𝑑𝑖 𝑥
 𝑤𝐿 𝑡 = −∞
𝐿 𝑖(𝑥) 𝑑𝑥
𝑑𝑥
 From which we can obtain
1 2
 𝑤𝐿 𝑡 = 𝐿𝑖 𝑡 𝐽
2

© Niwareeba Roland
 13

Inductors
 Now let’s consider the case of a dc current flowing
through an inductor. We see that the voltage across
the inductor is directly proportional to the time rate of
change of the current flowing through the inductor.
 A dc current does not vary with time, so the voltage
across the inductor is zero.
 We can say that an inductor is “a short circuit to dc.” In
analysing a circuit containing dc sources and
inductors, we can replace any inductors with short
circuits and calculate voltages and currents in the
circuit using our many analysis tools.
© Niwareeba Roland
 14

Inductors
 Example
 Find the total energy stored in the circuit of Fig. below.

(13.46mJ)

© Niwareeba Roland
 15

Series Capacitors
 If a number of capacitors are connected in series,
their equivalent capacitance can be calculated using
KVL. Consider the circuit shown in Fig. a. For this
circuit

: Equivalent circuit for N series-connected capacitors.

© Niwareeba Roland
 16

Series Capacitors
 𝑣 𝑡 = 𝑣1 𝑡 + 𝑣2 𝑡 + ⋯ + 𝑣𝑁 (𝑡)
1 𝑡
 𝑣𝑖 𝑡 = 𝑡
𝑖 𝑡 𝑑𝑡 + 𝑣𝑖 (𝑡0 )
𝐶𝑖 0
𝑁 1 𝑡 𝑁
𝑣 𝑡 = 𝑖=1 𝐶 𝑡0
𝑖 𝑡 𝑑𝑡 + 𝑖=1 𝑣𝑖 𝑡0 =
𝑖
1 𝑡
𝑡
𝑖 𝑡 𝑑𝑡 + 𝑣(𝑡0 )
𝐶𝑠 0
 Where
𝑁
 𝑣 𝑡0 = 𝑖=1 𝑣𝑖 (𝑡0 )
 And
1 𝑁 1 1 1 1
 = 𝑖=1 𝐶 = + + ⋯
𝐶𝑠 𝑖 𝐶1 𝐶1 𝐶𝑁
© Niwareeba Roland
 17

Parallel Capacitors

Equivalent circuit for N
capacitors connected in
parallel.

We employ KCL., As can be seen from Fig. a,

𝑖 𝑡 = 𝑖1 𝑡 + 𝑖2 𝑡 + ⋯ 𝑖𝑁 (𝑡)
𝑁
𝑑𝑣(𝑡) 𝑑𝑣(𝑡) 𝑑𝑣 𝑡 𝑑𝑣 𝑡 𝑑𝑣 𝑡
𝑖 𝑡 = 𝐶1 + 𝐶2 + ⋯ 𝐶𝑁 = 𝐶𝑖 = 𝐶𝑝
𝑑𝑡 𝑑𝑡 𝑑𝑡 𝑑𝑡 𝑑𝑡
𝑖=1
Where 𝐶𝑝 = 𝐶1 + 𝐶2 + ⋯ 𝐶𝑁

© Niwareeba Roland
 18

Parallel Capacitors
 Example
 Compute the equivalent capacitance of the network in
Fig. below.

(1.5μF)

© Niwareeba Roland
 19

Series Inductors


Equivalent circuit for N series-connected inductors

If N inductors are connected in series, the equivalent

inductance of the combination can be determined as
follows. Referring to Fig. a and using KVL, we see that
𝑣 𝑡 = 𝑣1 𝑡 + 𝑣2 𝑡 + ⋯ 𝑣𝑁 (𝑡)

© Niwareeba Roland
 20

Series Inductors
𝑑𝑖(𝑡) 𝑑𝑖(𝑡) 𝑑𝑖 𝑡 𝑁 𝑑𝑖 𝑡
𝑣 𝑡 = 𝐿1 + 𝐿2 + ⋯ 𝐿𝑁 = 𝑖=1 𝐿𝑖 =
𝑑𝑡 𝑑𝑡 𝑑𝑡 𝑑𝑡
𝑑𝑖 𝑡
𝐿𝑆
𝑑𝑡
 Where
𝑁
 𝐿𝑆 = 𝑖=1 𝐿𝑖
= 𝐿1 + 𝐿2 + ⋯ 𝐿𝑁
 Therefore, under this condition the network in Fig. b is
equivalent to that in Fig. 6.a.

© Niwareeba Roland
 21

Parallel Inductors

Equivalent circuits for N inductors connected in parallel.

Consider the circuit shown in Fig. a, which contains N

parallel inductors. Using KCL, we can write
𝑖 𝑡 = 𝑖1 𝑡 + 𝑖2 𝑡 + ⋯ 𝑖𝑁 (𝑡)

© Niwareeba Roland
 22

Parallel Inductors
1 𝑡
 However 𝑖𝑗 (𝑡) = 𝑣 𝑥 𝑑𝑥 + 𝑖𝑗 (𝑡0 )
𝐿𝑗 𝑡0

𝑁 1 𝑡 𝑁
𝑖 𝑡 = 𝑗=1 𝐿 𝑡0
𝑣 𝑥 𝑑𝑥 + 𝑗=1 𝑖𝑗 (𝑡0 ) =
𝑗
1 𝑡
𝑣 𝑥 𝑑𝑥 + 𝑖(𝑡0 )
𝐿𝑝 𝑡0
1 1 1 1
 Where = + +⋯
𝐿𝑝 𝐿1 𝐿2 𝐿𝑁

© Niwareeba Roland
 23

Parallel Inductors
 Examples
 Determine the equivalent inductance and the initial
current for the circuit shown in Fig. below.

(2 mH, -1 A)

© Niwareeba Roland
 24

Parallel Inductors
 Calculate the energy stored in the inductor in the
circuit shown in Fig. below.

© Niwareeba Roland