HAIRDRESSING G-10
FIRST QUARTER MODULE 4 WEEK 4
Name : _________________________ Date: ____________________
Grade/Section:__________________ Name of Parent : _________________
LEARNING ACTIVITY SHEET
Perform Blow Drying of Hair
I.INTRODUCTION
The lesson deals with the hair drying techniques and its manner of sectioning so the drying of hair
will be in order. This will also let you get acquainted with the blow drying units, the ways of giving
finishing touches and the safety measures involved when drying the hair.
II. MOST ESSENTIAL LEARNING
Acquire knowledge in hair drying technique then Understand the importance of appropriate
sectioning of hair in blow-drying and Learn to set the temperature of the blow-dryer unit.
III.STRATEGY
A.EXPLORE
Directions: Encircle the letter of the correct answer and write your answer on a separate sheet of
paper.
1. Which of the following is the process of styling wet hair while blow drying?
a. Drying hair c. Rolling hair
b. Styling hair d. Waving hair
2. What is shaping the hair into waves, using comb or brush and directed heated air from a dryer?
a. Blow-drying c. Blow-waving
b. Blow-combing d. Blow-stretching
3. What do we call the drying of the hair with the hand held dryer?
a. Blow-drying c. Blow-stretching
b. Blow-combing d. Blow-waving
4. Which of the following is the most important piece of equipment, having adjustable speeds, easy to hold
and easy to reach when used in hair drying?
a. Hand dryer attachments c. Brushes
b. Hand held dryer d. Combs
5. Which of the following is the process of lifting, teasing, pulling and directing hair with the fingers or
hands in drying?
a. Blow-combing c. Blow-waving
b. Blow-drying d. Finger drying
C.LEARN
Blow drying helps to pre-mould your hair into a style. It plays a part in every haircut service, it
effectively takes the moisture out of hair, causing less frizz and creates a natural overall body and shape
to style. Fact: Blow drying your hair can damage and dry it out. "The extreme heat from hair dryers (and
from curling irons) causes the water under the cuticles (the outermost layer of the hair) to form bubbles
that stress and break the hair." The result? Split ends, breakage, and brittle hair.
1
Proper Brushing Techniques
“The classic technique of brushing hair — head down, bending from the waist, slowly and gently
brush from the nape of the neck, up through the sides of the crown, slowly working to the front of the
head. Then, stand up straight and repeat the whole process — is best,” explains Adams. “If you have long
hair, however, work on the ends first so you don’t move the knots down by starting at the scalp.”
Disadvantage of brushing hair while wet. “When hair is wet, it will stretch to three times its original
length and return to normal when dry,” he explains. “If the hair has been damaged by chemical treatments
or if the hair is naturally fine or weak, brushing when wet may stretch the hair and break it,” he adds.
Should you wish to brush your hair when wet, he says “it is always better to apply conditioner in the
shower and use a wide tooth comb to comb out the hair, then rinse and comb again.”
Definition of Terms
• Mold - to form or shape
• Tongs - instrument consisting of two arms used for grasping
• Crimp - to press into small folds; to corrugate
• Distort - to pull or twist out of shape
DRYING HAIR TO SHAPE AND TO CREATE A FINISHED LOOK
Drying Hair Principles
Drying hair is the process of styling wet hair while blow-drying it. Using a hand-held dryer, you use
a variety of techniques to create different effects. While directing heated air on to the wet hair, you mould
the hair with brushes, use a comb or your fingers, and positioning it to fit the style for which you have cut
it. Like other methods of setting wet hair, blow styling works by changing 23 the hair structure. While hair
is wet, and heat is applied, it can be molded into a chosen shape. The style is only temporary, though. As
the hair gradually absorbs moisture from the atmosphere, it returns to its original shape. Combing styled
hair with hot water returns the hair to its natural form straight away.
Heat Molding Techniques
Heat can be applied to hair in other ways:
• To wave it using irons
• To curl it using tongs
• To crimp it using heated crimpers
• To straighten it using hot combs or hot brushes
2
Like other methods, these techniques depend on the softening effect of heat. The molded hair
must be allowed to cool before it will hold its shape. If you comb through it while it is still warm, you will
lose or distort the shape. Hair molded in this way returns to its natural state if combed with hot water.
Blow Styling Techniques
The technique you choose will be determined by the hair texture, the quality and quantity of hair, the style to be
produced and the cut. The most suitable hair for blow styling is firm, thick, and coarse hair
These are additional styling aids –
Thickeners, Setting mousses and gels
These are designed to give directions to the hair. Fine and fluffy hair requires the help of one of
these if you are to obtain successful results
BLOW – WAVING is shaping the hair into waves, using directed heated air from hair/ dryer, and combs,
brushes or your hands. It achieves natural soft fullness.
BLOW – DRYING is simply drying the hair with the hand held dryer. It is used to blow dry hair into a
chosen shape, or in a required direction.
SCRUNCH DRYING is the gripping and squeezing clumps of hair while directing heated air into the hand.
The process yields a casual, ruffled, molded shape.
FINGER OR HAND DRYING is the lifting pulling and directing hair with the fingers or hands. Casual, soft
and full shapes can be achieved. Billowing fullness is perhaps the chief effect.
BLOW – COMBING is the drying and shaping using comb, or a comb attachment fixed to the hairdryer. It
is a kind of blow drying and achieves shape and direction.
BLOW – STRETCHING OR STRAIGHTENING a means of smoothing and unkinking or straightening the
hair. A variety of brush shapes and sizes may be used.
A blow – style consists of first shampooing the hair, then softening it with a dryer and finally molding it
into shape using a blow-dryer. It may be dressed, if required, when the hair has cooled.
Natural drying is leaving the hair to dry naturally, depending on whether the cut and the style are
suitable. Natural drying maybe assisted by the heat of the sun and wind.
Tools and Materials Needed in Hair Brushing
Salon Hair Blower 220V Roller hair brush
Hair finishing products Hair clamps
Hair clips Comb with tail
Bath towel Styling aids
Shoulder cape
3
REMEMBER
For a smooth and professional finish, it is important to section the hair when blow drying. The reason why
stylist section their client’s hair when finishing or blow drying is, it provides more control with the brush,
tension, heat, airflow and direction.
C.ENGAGE
Direction: Arrange the letters to form a word in column A and much with the meaning being described in
column B.
A B
1. SNOGT a. to pull or twist out of shape
2. MIPRC b. instrument consisting of two arms use for
grasping
3. DLMO c. to press into small folds, to corrugate
4 TORTSID d. to form or shape
D. APPLY
Direction: Identify and label the different tools and materials used in blow drying
1._________ 2.__________ 3. __________ 4.______________ 5. _____________
IV.EVALUATION
Direction: Fill in the blanks or write the answer on the blanks.
_______________1. Drying and shaping the hair using comb or comb attachment to fixed the hairdryer.
_______________2. Gripping and squeezing clumps of hair while directing heated air into the hand.
_______________3. Drying by lifting, pulling and directing hair with the fingers or hand.
_______________4. Shaping the hair into waves, using directed heated air from hair dryer, and combs,
brushes or your hand.
_______________5. This is simply drying the hair with the hand held dryer. It is used to blow dry hair into
chosen shape, or in a required direction.
4
REFERENCE
Competency Based Learning Module in Hairdressing NC II
ttps://www.google.com/search?q=importance+of+blow+drying+hair&oq=importance+of+blow+dryi
ng+h&aqs=chrome.0.0j69i57.11970j0j8&sourceid=chrome&ie=UTF-8
https://www.bustle.com/articles/132481-how-often-you-should-blow-dry-your-hair-according-toscience-
photos
Submitted by; Checked by;
EVELYN E. PAHAPAY EXCELSIS G.SUAREZ
MT-1 Head TVE-HE Department
5
ANSWER SHEET
HAIRDRESSING G-10
FIRST QUARTER MODULE 4 WEEK 4
Name : _________________________ Date: _________________
Grade/Section:__________________ Name of Parent : _________________
A. EXPLORE
PRE-TEST POST TEST
1. 1.
2. 2.
3. 3.
4. 4.
5. 5.
C.ENGAGE
Direction: Arrange the letters to form a word in column A and much with the meaning being described in
column B.
A B
1. SNOGT a. to pull or twist out of shape
2. MIPRC b. instrument consisting of two arms use for grasping
3. DLMO c.to press into small folds, to corrugate
4 TORTSID d.to form or shape
D.APPLY
Direction: Identify and label the different tools and materials used in blow drying
1._________ 2.__________ 3. __________ 4.______________ 5. _____________
NOTE: Alayon pagbalik sini na answer sheet ,kay mao ini an ako e recod para san iyo score ngan activity.
diri na ibalik an module iyo na yon Copy pakitago basi mayon kmo copy pag exam. Salamat
6
Good luck!!! MAAM PAHAPAY
