A:ARQ-EPR-AN02# admin
A:ARQ-EPR-AN02>admin# exit
A:ARQ-EPR-AN02# show port
============================================================================
Ports on Slot 1
============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port SFP/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
----------------------------------------------------------------------------
1/1/1 Up Yes Link Up
1/1/1.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/2 Up Yes Link Up
1/1/2.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/3 Up Yes Link Up
1/1/3.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/4 Up Yes Link Up
1/1/4.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/5 Up Yes Link Up
1/1/5.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/6 Up Yes Link Up
1/1/6.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/7 Up No Down
1/1/7.1 Up No Down 1514 1514 - accs cem tdm
1/1/8 Up No Down
1/1/8.1 Up No Down 1514 1514 - accs cem tdm
1/1/9 Up Yes Link Up
1/1/9.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/10 Up Yes Link Up
1/1/10.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/11 Up Yes Link Up
1/1/11.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/12 Up Yes Link Up
1/1/12.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/13 Up Yes Link Up
1/1/13.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/14 Up Yes Link Up
1/1/14.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/15 Up Yes Link Up
1/1/15.1 Up Yes Up 1514 1514 - accs cem tdm
1/1/16 Up Yes Link Up
1/1/16.1 Up Yes Up 1514 1514 - accs cem tdm
1/2/1 Up No Down
1/2/1.1 Up No Down 1514 1514 - accs cem tdm
1/2/2 Up No Down
1/2/2.1 Up No Down 1514 1514 - accs cem tdm
1/2/3 Up Yes Link Up
1/2/3.1 Up Yes Up 1514 1514 - accs cem tdm
A:ARQ-EPR-AN02# configure port 1/2/15
A:ARQ-EPR-AN02>config>port#
aps + Configure aps group parameters
[no] ddm-events - Enable/Disable Digital Diagnostic Monitoring (DDM)
events for the port
[no] description - Add/remove a text description for the port
dsl + configure attributes for a DSL port
dwdm + Configure the Dense Wavelength Division Multiplexing
parameters
ethernet + Configure attributes for an ethernet port
gpon + configure attributes for a GPON port
multilink-bund* + Configure parameters for a multilink bundle
mw + Configure microwave link parameters
serial + Configure attributes for a Serial port
[no] shutdown - Administratively enable/disable the port
sonet-sdh + Configure attributes for a SONET/SDH port
tdm + Configure attributes for a TDM port
voice + Configure attributes for a Voice port
A:ARQ-EPR-AN02>config>port# tdm
A:ARQ-EPR-AN02>config>port>tdm# e1
A:ARQ-EPR-AN02>config>port>tdm>e1#
[no] channel-group + Create/delete DS0 channel groups
clock-source - Configure the clock for transmitted data
framing - Configure the framing for the channel
[no] hold-time - Configure a channels dampening timers in 100s of
milliseconds
[no] loopback - Activate a loopback on the channel
[no] report-alarm - Enable/disable logging of alarms
[no] shutdown - Administratively enable/disable the channel
[no] signal-mode - Activate the signal-mode on the channel
ssm + Configure E1 Synchronous Status Message (SSM)
parameters
[no] threshold - Configure BER signal degradation failure thresholds
A:ARQ-EPR-AN02>config>port>tdm>e1# exit
A:ARQ-EPR-AN02>config>port>tdm# exit
A:ARQ-EPR-AN02>config>port# exit
A:ARQ-EPR-AN02# show
- show
alias - Display existing aliases
aps - Display Automated Protection Switching (APS)
information
bof - Display boot options file information
boot-messages - Display boot messages configured
card - Display physical card related information
chassis - Display chassis information
cron + Display CRON related data
debug - Display which debug points have been set
eth-cfm + Show CFM information
external-alarms + Show external alarms information
filter + Display IP/MAC filter and counter related informatio
lag - Display LAG information
log + Display event and accounting policy log information
mda + Display MDA information
multilink-bund* + Display multilink bundle information
mw + Display microwave information
pools + Display pool information
port + Display physical port information
port-tree - Display tree for SONET/SDH or TDM ports/channels
A:ARQ-EPR-AN02# show
- show
alias - Display existing aliases
aps - Display Automated Protection Switching (APS)
information
bof - Display boot options file information
boot-messages - Display boot messages configured
card - Display physical card related information
chassis - Display chassis information
cron + Display CRON related data
debug - Display which debug points have been set
eth-cfm + Show CFM information
external-alarms + Show external alarms information
filter + Display IP/MAC filter and counter related informatio
lag - Display LAG information
log + Display event and accounting policy log information
mda + Display MDA information
multilink-bund* + Display multilink bundle information
mw + Display microwave information
pools + Display pool information
port + Display physical port information
A:ARQ-EPR-AN02# configure port 1/2/15
A:ARQ-EPR-AN02>config>port# exit
A:ARQ-EPR-AN02# show chassis
============================================================================
Chassis Information
============================================================================
Name : ARQ-EPR-AN02
Type : 7705 SAR-8
Location :
Coordinates :
CLLI code :
Number of slots : 3
Number of ports : 56
Critical LED state : Off
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK
Base MAC address : 24:af:4a:28:a8:01
Hardware Data
Part number : 3HE02773AAAA0105
CLEI code : IPMJJ10GRA
Serial number : LL102910101
Manufacture date : 07122010
Manufacturing string : PDM ECO
Manufacturing deviations :
Time of last boot : 2013/08/08 02:20:21
Current alarm state : alarm cleared
----------------------------------------------------------------------------
Environment Information
Module
Status : ok
Type : fan-v2
Fan Information
# of on-board fans : 8
Status : up
Speed : full speed
External Alarms Interface
--------------------------------------------
Input Pin Event State
--------------------------------------------
IN-1 1 Critical : ok
IN-2 2 Major : ok
IN-3 11 Major : ok
IN-4 12 Minor : ok
--------------------------------------------
Hardware Data
Part number : 3HE02778ABAB0103
CLEI code : IPUCASM1AA
Serial number : NS102562925
Manufacture date : 06302010
Manufacturing string : C03512
Manufacturing deviations :
Time of last boot : 2013/08/08 02:20:21
Current alarm state : alarm cleared
----------------------------------------------------------------------------
Power Feed Information
Number of power feeds : 2
Input power feed : A
Type : dc
Status : up
Input power feed : B
Type : dc
Status : up
============================================================================
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02# : 7705 SAR-8
^
Error: Bad command.
A:ARQ-EPR-AN02# Location :
^
Error: Bad command.
A:ARQ-EPR-AN02# Coordinates :
^
Error: Bad command.
A:ARQ-EPR-AN02# CLLI code :
^
Error: Bad command.
A:ARQ-EPR-AN02# Number of slots : 3
^
Error: Bad command.
A:ARQ-EPR-AN02# Number of ports : 56
^
Error: Bad command.
A:ARQ-EPR-AN02# Critical LED state : Off
^
Error: Bad command.
A:ARQ-EPR-AN02# Major LED state : Off
^
Error: Bad command.
A:ARQ-EPR-AN02# Minor LED state : Off
^
Error: Bad command.
A:ARQ-EPR-AN02# Over Temperature state : OK
^
Error: Bad command.
A:ARQ-EPR-AN02# Base MAC address : 24:af:4a:28:a8:01
^
Error: Bad command.
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02# Hardware Data
^
Error: Bad command.
A:ARQ-EPR-AN02# Part number : 3HE02773AAAA0105
^
Error: Bad command.
A:ARQ-EPR-AN02# CLEI code : IPMJJ10GRA
^
Error: Bad command.
A:ARQ-EPR-AN02# Serial number : LL102910101
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacture date : 07122010
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacturing string : PDM ECO
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacturing deviations :
^
Error: Bad command.
A:ARQ-EPR-AN02# Time of last boot : 2013/08/08 02:20:21
^
Error: Bad command.
A:ARQ-EPR-AN02# Current alarm state : alarm cleared
^
Error: Bad command.
A:ARQ-EPR-AN02#
---------------------------------------------------------------------------
^
Error: Bad command.
A:ARQ-EPR-AN02# Environment Information
^
Error: Bad command.
A:ARQ-EPR-AN02# Module
^
Error: Bad command.
A:ARQ-EPR-AN02# Status : ok
^
Error: Bad command.
A:ARQ-EPR-AN02# Type : fan-v2
^
Error: Bad command.
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02# Fan Information
^
Error: Bad command.
A:ARQ-EPR-AN02# # of on-board fans : 8
A:ARQ-EPR-AN02# Status : up
^
Error: Bad command.
A:ARQ-EPR-AN02# Speed : full speed
^
Error: Bad command.
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02# External Alarms Interface
^
Error: Bad command.
A:ARQ-EPR-AN02# --------------------------------------------
^
Error: Bad command.
A:ARQ-EPR-AN02# Input Pin Event State
^
Error: Bad command.
A:ARQ-EPR-AN02# --------------------------------------------
^
Error: Bad command.
A:ARQ-EPR-AN02# IN-1 1 Critical : ok
^
Error: Bad command.
A:ARQ-EPR-AN02# IN-2 2 Major : ok
^
Error: Bad command.
A:ARQ-EPR-AN02# IN-3 11 Major : ok
^
Error: Bad command.
A:ARQ-EPR-AN02# IN-4 12 Minor : ok
^
Error: Bad command.
A:ARQ-EPR-AN02# --------------------------------------------
^
Error: Bad command.
A:ARQ-EPR-AN02#
A:ARQ-EPR-AN02# Hardware Data
^
Error: Bad command.
A:ARQ-EPR-AN02# Part number : 3HE02778ABAB0103
^
Error: Bad command.
A:ARQ-EPR-AN02# CLEI code : IPUCASM1AA
^
Error: Bad command.
A:ARQ-EPR-AN02# Serial number : NS102562925
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacture date : 06302010
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacturing string : C03512
^
Error: Bad command.
A:ARQ-EPR-AN02# Manufacturing deviations :
^
Error: Bad command.
A:ARQ-EPR-AN02# Time of last boot : 2013/08/08 02:20:21
^
Error: Bad command.
A:ARQ-EPR-AN02# Current alarm state : alarm cleared
