Bio Diesel b20, En590-Biodiesel b5 Specs

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

PRODUCT: BIODIESEL FAME-B5- EN 590 10 ppm

RESULT
COMPONENT METHOD OF ANALYSIS UNIT
Min. Max.
C.F.P.P. (summer) (3) °C -2
EN 116:1997
C.F.P.P. (winter) (3) °C 50,0 -12
CLOUD Point (summer) °C Report
EN 23015:1994
CLOUD Point (winter) °C 0
Cetane number EN ISO 5165:1998 n° 51,0
Cetane index EN ISO 4264:1996 Index 46,0
Viscosity @ 40 °C EN ISO 3104:1996 mm2/s 2,00 4,50
Water content EN ISO 12937:2000 mg/kg 200
Total contamination EN ISO 12662:2002 mg/kg 15
st
Copper strip corrosion (3 hr at 50 °C) EN ISO 2160: 1998 Indice 1 Class
Carbon residue
EN ISO 10370:1995 % weight 0,15
(on 10% distillation residue)
Total acidity ASTM D 974:2002 mgKOH/g 0,3
Lubricity, correct wear scar EN ISO 12156-1:2000 µm 460
Oxidation stability EN ISO 12205:1996 g/m3
20
Polyciclic aromatic hydrocarbons EN 12916:2001 %m/m 11,0(6)
Biodiesel content (5) EN 14078:2003 % vol 4,5 7,0
Biodiesel B20 - Specification

Property Units Test Method Limit


Calorific value, gross kcal/kg ASTM D-4868 Report
Pour Point °C UAE.S GSO ISO 3016, ASTM D-97, ASTM D- Report
5949
Cloud Point °C ASTM D-2500, ASTM D-5773 Report
CFPP °C ASTM D-6371, IP 309 Summer +12 °C
Winter +5 °C
Carbon residue - 10% MCRT mass % UAE.S GSO ISO 10370, GSO, ISO 1171, ASTM 0.20 Maximum
D-4530
Acid Number - Strong mgKOH/g UAE.S GSO 1075/2002, ASTM D 974 Nil Maximum

Acid Number - Total 0.1 Maximum


Cetane Index - UAE.S GSO ISO 4264/2008, ASTM D-976, 50 Minimum
ASTM D-473
Copper Strip Corrosion, 3 hrs 100 UAE.S GSO ASTM D-130 1 Maximum
°C
Viscosity @ 40 °C cSt. UAE.S GSO ISO 3104, ASTM D-445 2.0 - 4.5
Poly Aromatic Hydrocarbon (PAH) mass % IP 391 11 Maximum
Lubricity, HFRR microns ASTM D-6079, IP 450 300 Maximum
Oxidation Stability g/m3 ASTM D-2274 25 Maximum

You might also like