Sled Wars Gizmo Answers
Sled Wars Gizmo Answers
Sled Wars Gizmo Answers
Date:
Format all responses in blue bold font.
2. Two firefighters are trying to break through a door. One firefighter is heavy, and the other is
light. If they run at the same speed, which one is more likely to break through? Explain.
Heavier because the mass will push harder.
Gizmo Warm-up
The ability to crash through doors and cause other changes
depends on an object’s energy. With the Sled Wars Gizmo,
you will explore the factors that affect the energy of a sled.
The Gizmo shows a Yeti named Burt riding his sled down a
steep hill. Burt plays a game where he tries to wreck as many
snowmen as he can.
1. Use the slider to set the Snowmen to 5. Check that the height of the sled is 25.0 m. Click
2. Click Reset ( ). Set the Red sled mass to 200 kg. Click Play. How many snowmen does
3. Click Reset. Drag the sled to the top of the hill so the starting height is 50.0 m. Click Play.
B. Why do you think this is so? There’s more mass and a greater velocity
2019
Get the Gizmo ready:
Activity A:
• Click Reset. Check that One sled is selected.
Acceleration and • Set the Red sled mass to 100 kg.
speed • Set the Number of snowmen to 0.
• Check that the height of the sled is 50.0 m.
1. Observe: With the sled at 50.0 m, click Play. Observe the Red sled speed speedometer.
A. What happens to the sled’s speed as it moves down the slope? increased
B. Acceleration is a change in speed or direction over time. In what two ways does the
C. Click Reset. This time, focus on the speed of the sled after it reaches the bottom of
the hill. Click Play. What do you notice? It goes in the same direction and stays at
2. Experiment: Click Reset. Set the Red sled mass to 10 kg. Click Play and then Pause ( )
after the sled reaches the bottom.
B. Click Reset, and change the Red sled mass to 200 kg. Click Play. What is the
C. Try other sled masses. Does the mass of the sled affect its final speed? No
In this Gizmo, there is no friction, so there is no force slowing the sled down. As
long as there is no friction, the sled’s final speed only depends on the starting height.
In the real world, friction will affect the sled’s final speed.
3. Explore: Click Reset. Use the Gizmo to measure the sled’s final speed when it starts at a
height of 10 meters and when it starts at a height of 40 meters. Record these speeds below.
Speed when starting from 10 m: 14.00m/s Speed when starting from 40 m: 28.00m/s
2019
How does increasing the starting height affect the final speed? The higher the starting height
the faster the speed
Take the five question
Take the five-question quiz below the Gizmo simulation. Create a full screen
image of the quiz results and paste here.
2019