Scribd
Upload
53 views1 page

Shandong Nicest Carbon Black Co,.Ltd: Model Product Standards GB3778-2011

Shandong Nicest Carbon Black Co,.Ltd produces carbon black under the product standard GB3778-2011. Their N375 carbon black has an iodine adsorption number of 90±5 g/kg, an oil absorption number of 114±5 10-5m3/kg, and a crushed oil absorption number of 96±5 10-5m3/kg. It has good processing characteristics and is suitable for applications such as tire carcasses and treads.

Uploaded by

Phuong The Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

Shandong Nicest Carbon Black Co,.Ltd: Model Product Standards GB3778-2011

Shandong Nicest Carbon Black Co,.Ltd produces carbon black under the product standard GB3778-2011. Their N375 carbon black has an iodine adsorption number of 90±5 g/kg, an oil absorption number of 114±5 10-5m3/kg, and a crushed oil absorption number of 96±5 10-5m3/kg. It has good processing characteristics and is suitable for applications such as tire carcasses and treads.

Uploaded by

Phuong The Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Shandong Nicest Carbon Black Co,.

Ltd

Model Product standards GB3778-2011

Iodine Adsorption No. g/kg 90±5

Oil absorption No. (OAN) 10-5m3/kg 114±5

N375 Crushed OAN(COAN) 10-5m3/kg 96±5

Tint Test,Reflectance From ITRB % 114±7

CTAB absorption surface


103m2/kg 93±5
Area-N2

STSA 103m2/kg 91±5


Processing
Characteristics Heating Loss % ≤1.0

Moderately High Ash Content % ≤0.5


Reinforcement
Good Abrasion Resistance 500μm Sieve Resiude mg/kg ≤10
Low Modulus High
45μm Sieve Resiude mg/kg ≤500
Hardness
Excellent Processing
Pour Density kg/m3 345±40
Charactentstics
Sulphur Content % ≤1.5
(Main Application)
Single Pellet Hardness(maximum) CN ≤70

Single Pellet Hardness(adverage) CN ≤50


Tire Carcass Tire Tread
Tire Sidewall Coating 300% Stretching Stress Mpa 0.5±1.0
Coveyor Belt Covers
Rubber Products Ink Fine Content (Jumbo Bag) % ≤7.0
Plastics
Fine Content (Paper Bag) % ≤10

You might also like