SELLING PROCESS

All selling process contain the same basic steps, though the detail of

each step and time required to complete it will vary according to the product

that is being sold. For example: a door to door sales

representative may go through all the steps from prospecting to closing of sale

in a matter of ten to fifteen minutes in contrast, the selling process for

computer or electronic typewriter may take several visits, even years, for

getting an order. 2.5.1 Prospecting

The selling process begins with prospecting or finding qualified

potential customers. Except in retail selling, it is unlikely that customers will

come to the sales person. In order to sell the product, the sales person must

seek out potential customers, prospecting involves two major activities-

(a) identifying potential customers also known as prospects; and

(b) qualifying them in order to determine if they are valid prospects.

(a) Identifying prospects

The identification of potential customers is not an easy job, especially

for a new sales person. Rejection rate is quite high and immediate payoffs are

usually minimal. In some consumer goods businesses, identification of

prospects usually come from friends and acquaintances, other sales people,

former customers, present customers etc. Few of the best sources and

techniques for finding prospects are discussed below.

Present customers: The best source of prospects is usually the sales

person’s existing satisfied customers. It is much easier to sell additional goods

and services to existing customers than to attract new customers. Indian

companies are using this method of selling successfully. For example person
or an organization who has purchased a portable typewriter from an office

automation product company and is pleased with it is usually more receptive

to purchase a bigger typewriter and similar product from the same company

than someone else. This is the main reason, present customers should get

first priority by the company when new products and services are introduced.

Endless chain: This is also an effective prospecting tactics. In this

method companies use satisfied customers as source of referrals. Sales

representatives ask current customers for names of friends or business

associates who might need similar products or services. Then, as the sales

person contacts and sells to these prospects, more referrals are solicited. In

this way the process continues further.

Centre of Influence: Another effective prospecting technique based on

referrals is the center of influence approach. A center of influence is a person

with information about other people or influence over them that can help a

sales person identify good prospects. Some frequently used centers of

influences are housewives, bankers, local

politicians etc.

Spotters: Some companies use spotters as a source for prospecting

potential customers. Spotters are usually ‘sales trainees’ who help sales

person identifying prospects, thus saving time and qualifying sales lead.

Cold call: Cold call is also known as unsolicited sales calls. This

prospecting techniques involves knocking on doors. The sales person makes

contact with a potential customers, introduces himself or herself, and asks if

there is a use for the product or service. This technique is utilized by the sales

person when they have time available between scheduled appointments.

classified telephone directory is the most obvious one. A sales person may

also find that membership directories of trade associations, professional

societies, and civic and social organizations are good sources for prospects.

Mailing lists: In India, specialized companies compile lists of

individuals and organizations for direct mail advertisers. These lists may also

be used to identify sales prospects. The major advantages of mailing list are

that they are often more current and more selective than

directories.

Trade shows and exhibitions: A cost effective way to make personal

contacts and locate prospective buyer is to participate in trade shows and

exhibitions. Now a days more and more companies are increasing their

participation in these shows and exhibitions to company’s booth by mailing

invitations or promising a gift. Advance announcements sent to trade

publications may also help to attract prospects. In view of the rising costs of

personal selling trade shows have become an increasingly important source

of prospecting. India International Trade Fair organized by Trade Fair

Authority of India every year provides a good example of usage of trade shows

for prospecting.

(b) Qualifying prospects

Once the sales person has identified potential customers, he or she

must qualify them to determine, if they are valid prospects. Unless this is

done, time and energy is wasted in trying to sell to people who cannot or will

not purchase the product or service.

approach to qualifying often called MAN (Money, Authority and Need)

approach is given below:

Money: Does the prospect have the money or resources to purchase a

product or service? Ability to pay is very critical factor in qualifying a prospect.

The sales people must be familiar with financial resources of a prospect.

Authority: Does the prospect have the authority to make commitment?

This is a particular concern when dealing with corporation, government

agencies or other large organizations. Even while selling to a married couple,

it may be difficult to identify who actually makes the purchase decision. A

sales person must identify the key decision maker early to economise on

selling time more effectively.

Need: Does the prospect need the product or service? If a sales person

cannot establish that the customer will benefit from purchasing a product or

service, there is no reason to waste a sales call. The prospect either will refuse

the offer or will end up dissatisfied with the purchase. Before proceeding

further the sales person should first appraise whether money, authority and

need exist with the prospect.

2.5.2 Preparation

After a prospect has been identified and qualified, the sales person

prepares for the sale of product or service. The preparation stage involves the

two key activities i.e. Pre-approach and Call Planning.

(a) Pre-approach

The pre-approach step includes all the information gathering activities

necessary to learn relevant facts about the prospect and his or her needs and

situations.
 Four necessary steps of pre-approach are:

1. It should disclose the party need and ability to buy.

2. It should provide information that will enable the seller to tailor

the presentation to the prospect.

3. It should provide information that may keep the sales person from

making serious tactical errors during the presentation.

4. Finally, a good pre-approached increases the sales person

confidence and makes him confident to handle whatever may

arise during the sales.

(b) Call planning

Call planning involves a specific planning sequence. The sales person

defines the objective of the call, devise a selling strategy to achieve this

objective, and makes the appointments. The primary objective of any sales

effort is to get an order. For some sales call intermediate objectives may be

needed. Some examples of intermediate objectives are:

• To obtain more information about the prospect.

benefits of the product or service.

• To obtain permission for demonstration of the product.

• To introduce a new distributor.

The sales person must develop a strategy, or course of action to achieve

his or her objective. Careful consideration of the prospect’s background and

needs is required in order to able to formulate a tailor made strategy

appropriate for the prospect. Since sales calls are costly, they should be

arranged in advance. Cold calls i.e. calls without specific appointment may be

appropriate for introducing the sales person or dropping off information. This
method is generally inefficient for selling most products and services and is

not consistent with modern

professional selling.

2.5.3 Presentation

After establishing rapport with the prospects through calls, the sales

person proceeds to the formal sales presentation. The objective of the

presentation is to explain how the product meets the special needs of the

consumer. The job of the sales person is to inform the prospect about the

characteristics, capabilities and availability of goods and services that are for

sale. In order to ensure that the presentation is understood by the prospect,

the sales person should be clear in his/her communication. Presentation

should also be interesting enough to keep the attention of the prospect

focused on the proposal.

Sales presentations are classified into the different categories:

Fully automated, Semi-automated, Memorized, Organized, and Unstructured.

Fully automated: The fully automated presentation is the most highly

structured approach, based on film or slide presentations. The sales person

simply answer questions or clear up doubts. e.g. selling life insurance to the

rural or semi-urban prospects.

Semi-automated: In this approach, the sales person reads from

brochures or literatures, adding comments to the prepared materials when

necessary. A common example is selling of pharmaceutical products by

medical representatives.

Memorized: In memorized presentation, company message is

presented, with few changes initiated by the sales person.

sales presentation method is the organized presentation. With this method

the sales person has complete flexibility in oral communication but follows a

company prepared outline or checklist. The organized approach best

exemplifies the selling process in which customers are moved through four

stages to a purchase decision; i.e. attention, interest, desire and action (AIDA).

Unstructured presentations: (Also referred to as problem solving) In

this approach, the buyer and seller together explore the problems that are the

real sources of the company’s needs. Although unstructured presentations

are often effective and widely used, they have a number of limitations. Such

presentations tend to be not too well-focused. As a result, points are often

missed and time is wasted. Further, sales person do not usually anticipate

objections but may have to face surprise complaint from the prospects.

Because it is difficult to teach sales person how to use the unstructured

method, the problem solving presentation seems best suited to experienced,

sales person who are selling to established customers.

Sales presentation comprises of two distinct activities, approach and

demonstration.

a) Approach

When the sales person has the name of the prospect and adequate pre-

approach information, the next step is the actual approach. It frequently

makes or breaks the entire presentation. If the approach fails, the sales

person often does not get a chance to give a presentation or demonstration. It

gets the prospect attention, it immediately inspires interest in hearing more

about the proposition, and it makes easy transition into the demonstration

phase.
 Four basic approaches are in common use:

1. The introductory approach, the sales person introduces himself

to the prospect and states what company he

represents.

2. The product consists of handling the product to prospect with

little conversation. It can be most effective when the product is

unique and creates interest on sight.

3. The sales person starts the sale in a consumer-benefit approach

by informing the prospect of what the firm can provide in benefits.

In other words, directs the prospects attention toward the

benefits the firm has to deliver.

4. Lastly, referral approach successful in getting an audience with

prospect who is difficult to see directly. It consists of obtaining

the permission of a past or present customer to use his or her

name as a reference in meeting a new

prospect.

(b) Demonstration

The demonstration is the core of the selling process. The sales person

actually transmits the information and attempts to persuade the prospect

through product demonstration to make a customer.

Two factors should be taken into consideration in preparing an effective

product demonstration:

i) The demonstration should be carefully rehearsed to reduce the

possibility of even a minor malfunction.

on’ experience with the product wherever possible. For example

an industrial sales representative might arrange a demonstration

before the purchaser’s technical personnel.