Configuración del dispositivo

Etiqueta: TIT-103
Tipo de dispositivo: 3144P
Fabricante: Rosemount
336 Variables

Impreso el: 14/09/2021 13:36:29

Parámetro Valor Parámetro Valor

(17485:Variable) degC (17898:Variable) Valor incorrecto
(17486:Variable) Ohms (4186:Variable) *****
(17487:Variable) Ohms (4208:Variable) 0x00
(17488:Variable) degC 1st Good S/N NA 0
(17665:Variable) Not limited 2-Wire Offset 0.000
(17666:Variable) 0x00 2-Wire Offset 0.000
(17667:Variable) 4 A Value 0.0039083
(17668:Variable) Device variable not c... A Value 0.0039083
(17670:Variable) -200.000 A/D ASIC Status 0x00
(17671:Variable) 850.000 A/D ASIC Status 0x00
(17672:Variable) -200.000 AC Power Filter 60 Hz
(17673:Variable) 850.000 ACK Count 71
(17674:Variable) Lower and Upper tri... Active Calibrator Mo... Off (Normal)
(17675:Variable) 0.010 Alarm Direction High
(17678:Variable) Constant Analog Output Value 9.577
(17679:Variable) 0x00 Analog Output Value Valor incorrecto
(17680:Variable) 4 AO fixed Valor incorrecto
(17681:Variable) Device variable not c... AO fixed Mask Valor incorrecto
(17683:Variable) NaN AO saturated Valor incorrecto
(17684:Variable) NaN AO saturated Mask Valor incorrecto
(17685:Variable) NaN Ave S/N NA 0
(17686:Variable) NaN Average Value NaN
(17687:Variable) Lower and Upper tri... B Value -5.775E-07
(17688:Variable) 0.010 B Value -5.775E-07
(17690:Variable) Not limited BACK Count 0
(17691:Variable) 0x00 Bar Graph On
(17692:Variable) 250 Baseline Resistance 0.000
(17693:Variable) Device variable not c... Baseline Resistance 0.000
(17696:Variable) Not limited Burst Message 1 Off
(17697:Variable) 0x00 Burst Message 1 Disabled
(17698:Variable) 250 Burst Message 2 Disabled
(17699:Variable) Device variable not c... Burst Message 3 Disabled
(17702:Variable) Not limited Burst Msg Trigger M... Continuous
(17703:Variable) 0x00 Burst Trigger Class Device variable not c...
(17704:Variable) 250 Burst Trigger Class Device variable not c...
(17705:Variable) Device variable not c... Burst Trigger Class Device variable not c...
(17708:Variable) Not limited Burst Trigger Level 0
(17709:Variable) 0x00 Burst Trigger Units degC
(17710:Variable) 250 Burst Trigger Units degC
(17711:Variable) Device variable not c... Burst Trigger Units degC
(17714:Variable) Constant Burst Variable Code Not Used
(17715:Variable) 0x00 Burst Variable Code Not Used
(17716:Variable) 250 Burst Variable Code Not Used
(17717:Variable) Device variable not c... Burst Variable Code Not Used
(17718:Variable) Valor incorrecto Burst Variable Code Not Used
(17858:Variable) 00:00:00 Burst Variable Code Not Used
(17896:Variable) Valor incorrecto Burst Variable Code Not Used
1
Parámetro Valor Parámetro Valor
Burst Variable Code Not Used Fourth Variable Not Used
Burst Variable Code Not Used Fourth Variable Not Used
Burst Variable Code Not Used Hardware 20
Burst Variable Code Not Used HART Universal Rev... 7
Burst Variable Code Not Used High Alarm 21.75
C Value -4.183E-12 High Saturation 20.50
C Value -4.183E-12 I/O and Subdevice S... Valor incorrecto
Cfg chng count 273 Intermit Detect Enable (default)
Channel flags 0x00 Latched AO fixed *****
Communication statu... 0x00 Latched AO saturate... *****
Connection 4 Wire Latched Device Diag... *****
Connection Not Used Latched Device Diag... *****
Country Valor incorrecto Latched Device Diag... *****
Current Date 01/01/1900 Latched Device Diag... *****
Current Time 00:03:41 Latched Device Stat... *****
Damping 5.0 Latched Ext dev stat... *****
Damping 0.0 Latched Operate Mo... *****
Damping 0.0 Lock Status *****
Damping 0.0 Long Tag TIT-103
Damping 0.0 Loop current mode Enabled
Damping 5.0 Low Alarm 3.75
Date 10/28/2015 Low Saturation 3.90
Date Valor incorrecto Lower -200.00
Date Valor incorrecto Lower NaN
Decimal Places Floating Lower Calibration Li... -200.00
Default Update Rate ... Valor incorrecto Lower Calibration Li... NaN
Default Update Rate ... Valor incorrecto Lower Calibration Po... 0.05
Default Update Rate ... 0.500 Lower Calibration Po... NaN
Default Update Rate ... 0.500 Lower Range Value 0.000
Description Lower Sensor Limit -60.00
Dev flags 0x00 Lower Sensor Limit 18.52
Device Diagnostic St... 0x00 Lower Sensor Limit 18.52
Device Diagnostic St... Valor incorrecto Lower Sensor Limit 18.52
Device Diagnostic St... Valor incorrecto Manufacturer Rosemount
Device Diagnostic St... Valor incorrecto Max dev vars 6
Device Diagnostic St... Valor incorrecto Max Update Period 0.500
Device Diagnostic St... Valor incorrecto Maximum Value NaN
Device Options 0x1D Maximum Value NaN
Device Profile Process automation ... Maximum Value NaN
Device Status 0x00 Maximum Value NaN
Device Status Mask Valor incorrecto Memory Status 0x00
Device Temperature ... degC Memory Status 0x00
Diff S/N NA 0 Message
Differential Value NaN Message 1 Content PV, SV, TV and QV
Distributor Rosemount Message 2 Content PV, SV, TV and QV
Drift Alert Historical ... 0 Message 3 Content PV, SV, TV and QV
Electronics Serial Nu... 9567192 Min/Max Tracking M... Disabled
Event Notification Co... Valor incorrecto Minimum Span 0.01
Event Status Valor incorrecto Minimum Span 0.01
Ext dev status 0x00 Minimum Span 0.01
Ext dev status Mask Valor incorrecto Minimum Span 0.01
Field Device 6 Minimum Span 0.01
Final Assembly Num... 874302 Minimum Span 0.01
First and Trigger Vari... Sensor 1 Temperatu... Minimum Value NaN
First and Trigger Vari... Sensor 1 Temperatu... Minimum Value NaN
First and Trigger Vari... Sensor 1 Temperatu... Minimum Value NaN
First Good Value NaN Minimum Value NaN
Fourth Variable Not Used Mode Disabled
Fourth Variable Not Used Mode Normal
2
Parámetro Valor Parámetro Valor
Mode Disable Status Summary 0x00
Model 3144P Status Summary 0x00
Num resp preams 6 STX Count 71
Number of Sensors 2 Tag TIT-103
numdamping 0.0 TC Diagnostic Mode ... Disabled
numdu Not used TC Diagnostic Mode ... Disabled
numdv NaN Temperature Update ... Valor incorrecto
numlsl NaN Temperature Update ... Valor incorrecto
numminsp 0.01 Temperature Update ... Valor incorrecto
numusl NaN Temperature Update ... Valor incorrecto
nusn 0 Temperature Update ... Valor incorrecto
Operate mode 1 Valor incorrecto Temperature Update ... Valor incorrecto
Operate mode Mask Valor incorrecto Temperature Update ... 00:00:00
Operation Status 0x00 Temperature Update ... 00:00:00
Operation Status 0x00 Temperature Update ... 00:00:03
Parameter 1 Sensor 1 Temperature Update ... 00:00:00
Parameter 2 Sensor 2 Temperature Update ... 00:00:00
Parameter 3 Differential Temperat... Temperature Update ... 00:00:00
Parameter 4 Terminal Temperatur... Terminal Damping 0.0
Percent of Range 34.859 Terminal Temperatur... 42.58
Physicl signl code Bell 202 current TermT S/N NA 0
Polling Address 0 Thermocouple Diagn... 0x00
Primary Variable Sensor 1 Temperatu... Thermocouple Diagn... 0x00
R0 Value 100.000 Third Variable Not Used
R0 Value 100.000 Third Variable Not Used
Real Time Clock Fla... 0x02 Third Variable Not Used
Requested Preamble... 6 Third Variable Not Used
Resistance NaN Threshold NaN
Resistance NaN Time Set Option *****
Response code Success Time Stamp 00:03:17
Second Variable Terminal Temperatur... Total Burst Msgs 3
Second Variable Terminal Temperatur... Transient Filter Thre... 0.20
Second Variable Terminal Temperatur... Trigger Level 5000.000
Second Variable Terminal Temperatur... Trigger Level 5000.000
Security Switch Stat... Off Trigger Level Fixed - 5K Ohms
Sensor 1 Status Good Trigger Level Fixed - 5K Ohms
Sensor 1 Value 34.86 Trigger Level 0
Sensor 2 Status Manual / Fixed Trigger Level 0
Sensor 2 Value NaN Trigger Mode Continuous
Sensor Status 0x00 Trigger Mode Continuous
Sensor Status 0x00 Trigger Update Rate ... Valor incorrecto
Sensor Type PT100, a=385 Trigger Update Rate ... Valor incorrecto
Sensor Type Not Used Trigger Update Rate ... 0.500
Serial Number 0 Trigger Update Rate ... 0.500
Serial Number 0 Units degC
Set Clock Date 01/01/1900 Units Not Used
Set Clock Time 00:00:00 Units Ohms
SI Unit Control Valor incorrecto Units Ohms
Snsr 1 Cal Mode User Trim Units Ohms
Snsr 1 trim units degC Units degC
Snsr 2 Cal Mode Factory Trim Update Period 0.500
Snsr 2 trim units Not Used Upper 850.00
Software 2 Upper NaN
Status Good Upper Calibration Li... 850.00
Status Bad Upper Calibration Li... NaN
Status Bad Upper Calibration Po... 75.00
Status Bad Upper Calibration Po... NaN
Status Bad Upper Range Value 100.000
Status group 5 0x00 Upper Sensor Limit 100.00
3
Parámetro Valor
Upper Sensor Limit 390.48
Upper Sensor Limit 390.48
Upper Sensor Limit 390.48
Variables Displayed Alternate PV and An...
WirelessHART Statu... Valor incorrecto
Xfer fnctn Linear