Scribd
Upload
89 views1 page

TCB TCB

This document is a grant of equipment authorization from the Bay Area Compliance Laboratory to SZ DJI BaiWang Technology Co., Ltd. for the Phantom 4 digital transmission system with FCC Identifier 2AHAY-WM3301601. The Phantom 4 is authorized to operate between 2406.5-2476.5 MHz at a conducted output power of 0.598 Watts with a frequency tolerance. Installation instructions must be provided to satisfy RF exposure compliance.

Uploaded by

topografar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views1 page

TCB TCB

This document is a grant of equipment authorization from the Bay Area Compliance Laboratory to SZ DJI BaiWang Technology Co., Ltd. for the Phantom 4 digital transmission system with FCC Identifier 2AHAY-WM3301601. The Phantom 4 is authorized to operate between 2406.5-2476.5 MHz at a conducted output power of 0.598 Watts with a frequency tolerance. Installation instructions must be provided to satisfy RF exposure compliance.

Uploaded by

topografar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FCC - OET TCB Form 731 Grant of Equipment Authorization Página 1 de 1

TCB GRANT OF EQUIPMENT


AUTHORIZATION TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory


Corp. Date of Grant: 02/22/2016
1274 Anvilwood Avenue
Application Dated: 02/22/2016
Sunnyvale, CA 94089
SZ DJI BaiWang Technology Co.,Ltd
Building No.1.2.7.9,Baiwang Creative Factory
No.1051,Songbai Road,Nanshan Xili District
Shenzhen,
China

Attention: Andy Xiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE,
and is VALID ONLY for the equipment identified hereon for use under the
Commission's Rules and Regulations listed below.

FCC IDENTIFIER: 2AHAY-WM3301601


Name of Grantee: SZ DJI BaiWang Technology Co.,Ltd
Equipment Class: Digital Transmission System
Notes: Phantom 4
Frequency Output Frequency Emission
Grant Notes FCC Rule Parts Range (MHZ) Watts Tolerance Designator
CC MO 15C 2406.5 - 2476.5 0.598

Output power listed is conducted. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or
transmitter. Users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in
the filing.

https://apps.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm 21/07/2016

You might also like