Neutrino-430 Indoor TDD eNodeB

INTRODUCTION
The Baicells Neutrino-430 is an advanced two-carrier indoor • Suitable for private and public deployments; any IP based
eNodeB (eNB) that is compliant with 3GPP LTE TDD backhaul can be used, including public transmission
technology. This 4x250mW eNB is capable of operating in protected by Internet Protocol Security (IPSec)
Carrier Aggregation (CA) mode or Dual Carrier (DC) / split
• Built-in integrated antenna
mode.
• Excellent non-line-of-sight (NLOS) coverage
In CA mode, contiguous or non-contiguous channels are
aggregated to provide up to 40 MHz bandwidth. This • Aggregate peak rate: (up to) DL 220 Mbps, UL 56 Mbps
essentially doubles the downlink capacity when the CA mode with 2x20 MHz, using all Cat6/7 or higher UEs
is used with all CAT6/7 user equipment. In DC mode, each
• 64 concurrent users per carrier, 64+64 in DC mode;
carrier is treated as an independent cell, supporting 64+64
upgradeable to higher capacity in future releases
users, and each supporting 5, 10, 15, or 20 MHz bandwidth.
Using a Neutrino-430 in DC mode simplifies and streamlines • Supports 4-port antenna or 2 antennas with 2 ports
the deployment of split sectors.
• Integrated small cell form factor for quick and easy
In addition to having the option to operate Neutrino-430 in installation
either CA or DC mode, HaloB (an embedded MME option)
comes as a default feature in the base software. The Baicells • Configured out of the box to work with Baicells CloudCore
patented HaloB solution migrates the necessary core network • Supports HaloB operating mode
functions to the eNB.
• Supports Citizens Broadband Radio Service (CBRS) pending
This product comes with a standard product warranty; Part 96 certification
extended warranty is available.
• Plug-and-play with self-organizing network (SON)
capabilities
FEATURES
Note: Features may vary based on model or region. • TR-069 network management interface support

• Standard LTE TDD Bands 48 and partial 42, 43 • IoT with all standard LTE Evolved Packet Core (EPC)

• Customization may be requested; contact • Lower power consumption, which reduces OPEX
[email protected]
• Built-in DHCP server, DNS client, and NAT functionality,
• GUI-based local and remote Web management providing strong high-speed routing

Neutrino-430 Indoor TDD eNB Data Sheet

www.baicells.com • +1 (888) 502-5585
v1.5, 1-Sep-2020
Neutrino-430 Indoor TDD eNodeB
HARDWARE SPECIFICATIONS 64 concurrent users in single carrier
LTE Mode TDD mode
64+64 concurrent users in DC mode
Frequency Bands 48 and partial bands 42, 43 User Capacity
64 concurrent users in CA mode
Channel Bandwidth 5/10/15/20 MHz per carrier
Future software release: 96
Max Output Power 24 dBm / port
3GPP standard Quality of Service Class
+/- 48V DC, PoE+/12V 2A, IEEE 802.3at QoS Control
Power Supply Identifier (QCI)
standard
DL: QPSK, 16QAM, 64QAM, and future
Power Consumption ~20W (peak) Modulation software release 256QAM
Receive Sensitivity -100 dBm UL: QPSK, 16QAM, 64QAM

Synchronization GPS, Network Listening (NL) Traffic Offload Local breakout

1 optical (SFP) and 1 RJ-45 Ethernet Voice VoLTE (future software release)
Interfaces
interface (1 GE)
Self-organizing network:
MIMO DL: 2x2 on each carrier • Automatic setup
SON
Installation Ceiling or wall mount • Automatic Neighbor Relation (ANR)
• PCI confliction detection
Antenna 3dBi, built-in omni antenna
RAN Sharing Multi-Operator Core Network (MOCN)
8.7 x 8.7 x 1.8 inches
Dimensions (HxWxD) Network Mgmt TR-069
220 x 220 x 45 millimeters
Weight 3.52 lbs / 1.6 kgs • Local/Remote Web maintenance
• Online status management
MTBF ≥ 150000 hours
• Performance statistics
MTTR ≤ 1 hour • Fault management
• Local/Remote software upgrade
SOFTWARE SPECIFICATIONS • Logging
Maintenance
• Connectivity diagnosis
LTE Standard 3GPP Release 15
• Automatic start and configuration
Peak Rate (up to) 2x20 MHz: DL (Mbps) UL (Mbps) • Alarm reporting
in DC mode • KPI reporting
SA1 : 2x80 2x28 • User information tracing
• Signaling Trace
SA - Subframe SA2 : 2x110 2x14
Assignment (configurable ENVIRONMENTAL SPECIFICATIONS
parameter) 2x10 MHz: DL (Mbps) UL (Mbps)
Operating Temperature 23°F to 113°F / -5°C to 45°C
SA1: config. 1(DSUUD) SA1 : 2x40 2x14
SA2: config. 2(DSUDD) Storage Temperature 14°F to 122°F / -10°C to 50°C
SA2 : 2x55 2x7
Humidity 5% to 95% RH
Peak Rate (up to) 2x20 MHz: DL (Mbps) UL (Mbps) Atmospheric Pressure 70 kPa to 106 kPa
in CA mode
SA1 : 160 28
GLOBAL PART NUMBER
Rates based on using
all Cat6/7 or higher SA2 : 220 14 Neutrino-430 indoor TDD eNodeB - LTE
UEs Release 15, 4x250mW (24 dBm), 3dBi
2x10 MHz: DL (Mbps) UL (Mbps) pBS31010 built-in antenna, 3.5 GHz (3550-3700
MHz), B42/43/48. Carrier
SA1 : 80 14
Aggregation/Dual Carrier.
SA2 : 110 7 Note: Customized versions may be requested.

Neutrino-430 Indoor TDD eNB Data Sheet

www.baicells.com • +1 (888) 502-5585
v1.5, 1-Sep-2020