Scribd
Upload
330 views69 pages

Load Balancer Radware SOP

1. Create VLANs and ports with VLAN IDs, then create a VADC context and peer it by adding the same HA ID on both ends. 2. Within the VADC context, configure management access, protocols, IP interfaces with gateways, static routes and proxy IPs. 3. Create real servers with required IPs and group them, then create virtual servers adding server groups, descriptions, virtual IPs and service ports.

Uploaded by

Mahen Bhosale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
330 views69 pages

Load Balancer Radware SOP

1. Create VLANs and ports with VLAN IDs, then create a VADC context and peer it by adding the same HA ID on both ends. 2. Within the VADC context, configure management access, protocols, IP interfaces with gateways, static routes and proxy IPs. 3. Create real servers with required IPs and group them, then create virtual servers adding server groups, descriptions, virtual IPs and service ports.

Uploaded by

Mahen Bhosale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 69

1 Create Vlans

2 Create Ports in Ports settings


NOTE-- PUT PVID( VLAN ID)
2 Create VADC
Define the Parameters in Capacities option
Add Vlan from Network

Create Vadc Context Ipin Management option for accessing that Ip


In vadc Peering plz add the HA id( For both end HA id should be same)
NOW LOGIN TO THAT CONTEXT IP
Create the Management Port in System--->Management access---->Management Ports
Enable all the Protocols from Mah=nagement Protocols
Add Switch Interface from NETWORK---->Layer3---->IP interface option
Give the Gateway address that is by Default address that will be Firewall ip

Add STATIC routes for the network address to Firewall Ip directly


Create the PROXY IP from Network option
Create Real Servers from Application delivery---->Server Resources---->real servers
Create the Ips which are required
Put those Ips from Real Server in the Server group
Add the Ips in a Group
Create the Virtual Servers

ADD the SERVER ID & Description & Virtual IP address


ADD the Service PORT

You might also like