The document provides specifications for plastic fittings under the SWR Fittings standard IS 14735:1999. It lists 10 types of fittings and specifies sizes, materials, tests, and dimensions. Key requirements include: fittings made of polyvinyl chloride; wall thickness and dimensional tolerances; visual, stress relief, softening, and acid resistance testing; and joint water tightness of 0.05MPa for 15 minutes.
The document provides specifications for plastic fittings under the SWR Fittings standard IS 14735:1999. It lists 10 types of fittings and specifies sizes, materials, tests, and dimensions. Key requirements include: fittings made of polyvinyl chloride; wall thickness and dimensional tolerances; visual, stress relief, softening, and acid resistance testing; and joint water tightness of 0.05MPa for 15 minutes.
The document provides specifications for plastic fittings under the SWR Fittings standard IS 14735:1999. It lists 10 types of fittings and specifies sizes, materials, tests, and dimensions. Key requirements include: fittings made of polyvinyl chloride; wall thickness and dimensional tolerances; visual, stress relief, softening, and acid resistance testing; and joint water tightness of 0.05MPa for 15 minutes.
The document provides specifications for plastic fittings under the SWR Fittings standard IS 14735:1999. It lists 10 types of fittings and specifies sizes, materials, tests, and dimensions. Key requirements include: fittings made of polyvinyl chloride; wall thickness and dimensional tolerances; visual, stress relief, softening, and acid resistance testing; and joint water tightness of 0.05MPa for 15 minutes.
Product list under SWR Fittings standard IS 14735 : 1999
i) Tee (87.5°) , Wye (45°) single, double (cross) or reducing with or without inspection doors ii) Bend with or without inspection doors (87.5°, 45° and 22° ) iii) Reducer iv) Coupler v) Socket plug vi) Cleansing pipe vii) Adaptor viii) Vent cowl ix) Pipe clip x) Waste trap with strainer
Size Group -1 40 to 110mm
Group -2 125 to 160mm
CIPET Ahmadabad, Jaipur, Vijayvada and Hyderabad, labs preferable BIS recognized Lab
Material : Polyvinyl Chloride and additives - Use of own Clean Rework material 10% allowed
Tests Dimension – Wall thickness , Socket Dimensions, Chamfer , Access Openings Dimension of Waste trap ( Nahani Trap) Dimension of Vent Cowl Dimension of Pipe Clip Workmanship - Finishing Visual appearance - Fittings Ends Stress Relief Test - 150°C for 1Hour Vicat Softening test - VST Shall not be less than 78 °C Resistance to sulphuric acid test - 14 Days at 55 °C in Sulphuric acid Titanium Dioxide content test - shall not be less than 2.5% by mass Lab test once in 6 months Sulphated Ash Content test - Shall not be more than 10% by mass Impact test (Drop test) - Drop freely from a height of 2m for Upto 75mm and 1 m above 75mm Water Tightness of Joint – 0.05Mpa (0.5Kg/cm2 ) for 15 minutes
Sealing Rings As per IS 5382 having IRHD Hardness of 50 ± 5
Wall thickness at Dimension for Solvent Cement fittings Dimension for Ring seal fittings DN Length of Neck Length Plain Socket Mean ID at mid Mean OD Depth Mean ID at Mean OD of bending of behind End minimum point of Spigot minimum mid point Spigot Neck socket bending mm e e2 e3 D1 D2 U D1 A max B min C min D2 40 3.2 - 3.8 2.9 2.4 40.1- 40.3 40.0 - 40.3 26 40.1- 41.1 18 5 18 40.0 - 40.3 50 3.2 - 3.8 2.9 2.4 50.1 - 50.3 50.0 - 50.3 30 50.1 – 51.1 18 5 20 50.0 - 50.3 63 3.2 - 3.8 2.9 2.4 63.1 - 63.3 63.0 - 63.3 36 63.1 – 64.1 18 5 23 63.0 - 63.3 75 3.2 - 3.8 2.9 2.4 75.1 - 75.3 75.0 - 75.3 40 75.1 – 76.2 20 5 25 75.0 - 75.3 90 3.2 - 3.8 2.9 2.4 90.1 - 90.3 90.0 - 90.3 46 90.1 – 91.2 23 5 28 90.0 - 90.3 110 3.2 - 3.8 2.9 2.4 110.1 -110.4 110.0 - 110.4 48 110.1 -111.3 26 6 32 110.0 - 110.4 125 3.2 - 3.8 2.9 2.4 125.1 – 125.4 125.0 - 125.4 51 125.1 – 126.4 28 7 35 125.0 - 125.4 140 3.6 – 4.2 3.2 2.7 140.2 – 140.5 140.0 - 140.5 54 140.2 – 141.4 30 8 38 140.0 - 140.5 160 4.0 – 4.6 3.6 3.0 160.2 – 160.5 160.0 - 160.5 58 160.2 – 161.5 32 9 42 160.0 - 160.5 Dimension of vent Access Pipe Clips Cowl Opening DN in Socket Clear Dimension of waste Trap Socket Stand off Wall Opening Mean ID mm Depth distance thickness Diameter min - max minimum Minimum minimum minimum 40 20 1.8 40 50 40.0 - 40.4 Maximum Diameter of Rim 135mm 50 20 1.8 50 55 50.0 - 50.4 Minimum depth of bowl 80mm 63 20 1.8 54 61 63.0 - 63.4 Minimum water seal 10mm 75 22 2.0 54 67 75.0 - 75.5 Minimum Spigot length 70mm 90 22 2.0 54 75 90.0 - 90.6 OD at spigot end 75mm to 77mm 110 24 2.0 63 85 110.0 - 110.7 125 24 2.0 63 92.5 125.0 - 125.7 140 24 2.0 63 100 140.0 - 140.8 160 24 2.0 75 110 160.0 - 160.8
