New MGE/MLE Motor With IE4 Efficiency: Supply Voltages

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GRUNDFOS DATA SHEET

CME The CME comes with the "Standard" functional


module. Other types are available on request.
New MGE/MLE motor with IE4 efficiency Supply voltages
The new MGE/MLE motors will be available for supply
voltages of:
1 x 200-240 V, 0.25 to 1.5 kW (P2)
3 x 380-500 V, 0.25 to 2.2 kW (P2).

TM05 6830 0113


These supply voltages will be available with the
existing MGE/MLE motors:
3 x 200-230 V
3 x 208-230 V.
Fig. 1 CME with the new MGE/MLE motor
Wireless communication
Improved overall energy efficiency The new MGE/MLE motors can communicate via
infrared light and radio signals. As a result, they can be
The new MGE/MLE motor represents the state-of-
controlled and monitored by both the existing R100
the-art of speed-controlled motors and efficiency.
remote control and the new Grundfos Go Remote.
Total efficiency of the new motor, including the The radio transmitter of the new MGE/MLE is globally
frequency converter, exceeds the IE4 level defined by
approved, except for use in China and Korea, due to
IEC 60034-31. This makes the CME unique for its local legislation.
class when it comes to efficiency.
The "Standard" user control panel has been chosen as
Lower I1/1 default for CM/CME pumps. Other variants are
The improved energy efficiency results in a 15 % available on request.
average reduction of full-load current.
Approvals
Improved performance cURus will be applied in Q3.
• Permissible ambient temperature increased to
50 °C.
• IP rating, now IP55 (optionally IP66).
• sound pressure level lower than competitor pumps.
• four different functional modules available.

Performance curves
p H
[kPa] [m]
1200
120 CME
The grey area represents the performance 3480 rpm
110
range covered by the new MGE/MLE 50/60 Hz
motor. For single-phase motors, the 1000 ISO 9906 Annex A
100
performance range is up to 1.5 kW and for
90
three-phase motors up to 2.2 kW.
The white area represents the performance 800 80
range still covered by the previous
MGE/MLE motor type. 70

600 60

50

400 40

30
CME1 CME 3 CME 5 CME 10 CME 15 CME 25
200 20
TM05 7187 4311

10

0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 Q [m³/h]

0 1 2 3 4 5 6 7 8 9 Q [l/s]
Technical specifications
Old MGE New MGE

Single-phase Single phase New current


Change in dimensions [mm]
(1 x 200-240 V) (1 x 200-240 V) values

P2 P2 H CME H CME Change in Imin Imax


Frame size Frame size B1 L1 L9
[kW] [kW] (1, 3, 5) (10, 15, 25) weight [kg] [A] [A]

0.55 71B / 71BA 0.55 71 2 25 25 18 0 1 3.3 2.8

1.1 80B / 80BA 1.1 80 2 -15 -15 18 18 -2 6.5 5.4

© Copyright Grundfos Holding A/S


3-phase (3 x 380-480 V) 3-phase (3 x 380-500 V) New current
Change in dimensions [mm]
Without service factor Without service factor values

P2 P2 H CME H CME Change in Imin Imax


Frame size Frame size B1 L1 L9
[kW] [kW] (1, 3, 5) (10, 15, 25) weight [kg] [A] [A]

1.5 90SB 1.5 90 4 -21 -21 -24 0 -7 2.8 2.3

2.2 90LC 2.2 90 4 -61 -61 -24 -9 -11 4 3.3

3-phase (3 x 460-480 V) 3-phase (3 x 440-480 V) New current

The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
Change in dimensions [mm]
With service factor 1.15 With service factor 1.15 values

P2 P2 H CME H CME Change in Imax


Frame size Frame size B1 L1 L9
[kW] / [hp] [kW] / [hp] (1, 3, 5) (10, 15, 25) weight [kg] [A]

1.5 / 2.0 90CC 1.5 / 2.0 90 4 -21 -21 -24 0 -7 2.5

2.2 / 3.0 90FA 2.2 / 3.0 90 4 -61 -61 -24 -9 -11 3.8

3-phase (3 x 200-230 V) New current


Change in dimensions [mm]
3-phase (3 x 208-230 V) values

P2 H CME H CME Imin Imax


Frame size B1 L1 L9
[kW] (1, 3, 5) (10, 15, 25) [A] [A]

1.1 90

1.5 90 No change, existing motor will continue.

2.2 90

The change in dimensions/weight should be added to or subtracted from the current values to get the new
dimensions/weight.

TM05 4505 2412


TM05 4506 2412

Fig. 2 CME cast iron Fig. 3 CME stainless steel

98347568 0413
ECM: 1110776
Subject to alterations.

GRUNDFOS A/S . DK-8850 Bjerringbro . Denmark


Telephone: +45 87 50 14 00
www.grundfos.com

You might also like