Scribd
Upload
44 views2 pages

Input Data:: Bottom Plate (160-11)

This document provides input data for designing the bottom plate of a 500 MW condenser, including 51 dimensions, specifications, and other variables needed for the design such as the rating of the condenser, width of the shell, position of water boxes and hot well, and thicknesses of various plates. The input data will be used to generate drawings of the bottom plate based on the specified variables.

Uploaded by

Ayush Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
44 views2 pages

Input Data:: Bottom Plate (160-11)

This document provides input data for designing the bottom plate of a 500 MW condenser, including 51 dimensions, specifications, and other variables needed for the design such as the rating of the condenser, width of the shell, position of water boxes and hot well, and thicknesses of various plates. The input data will be used to generate drawings of the bottom plate based on the specified variables.

Uploaded by

Ayush Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Bottom Plate (160-11)

Input Data:

S.No. Description Variable Unit 500 MW

Data Type
1. Rating of Condenser mw MW 500
2. LBTP of Condenser LBTP mm 14630
3. Width of condenser Shell CsW mm 8660 *
4. Pitch of Support Plates SpPc mm 770
5. Elevation of Water boxes Horizontal center line WbCL mm 3800
6. Elevation of Hot well HwEL mm -1679
7. Height of Water Boxes With flange WbHt mm 6500
8. Thickness of water box/chamber plates WbPtk mm 40
9. Width of Water boxes Rectangular flange WbFw mm 140 **
10. Inner Radius of Hot Well HwIr mm 1500 *
11. Height of Hot Well Flat part at Condenser CL HwFp mm 150 *
12. Thickness of Hot Well HwTk mm 16 *
13. Thickness of Bottom Plate BpTk mm 16 *
14. Thickness of Side Wall SwTk mm 16 *
15. Thickness of main tube plate MtpTk mm 40 *
16. Thickness of rectangular flange after machining WbFtk mm 90 **
17. Shell depth of water chamber (Water Side) WcSTpD mm 160 *
18. Distance of End Plate from Water chamber walls WcEpD mm 10 *
19. Width of Water chamber bottom plate WcBpW mm 300 *
20. Thickness of bottom plate Middle Stiffeners BpStk mm 16 *
21. Height of bottom plate Middle Stiffeners BpMsH mm 250 *
22. Thickness of Water chamber Stiffeners WcStk mm 16 *
23. End margin of bottom plate BpEm mm 50 *
24. Distance of Stiffener no.1 form Cl of condenser WbS1D mm 267 *
25. Pitch of water chamber Stiffeners WbSPc mm 492 *
26. Width of Bottom Plate condensate cut-out BpCoW mm 450 *
27. Length of Bottom Plate condensate cut-out BpCoL mm 500 *
28. Distance of Center of Bottom Plate middle BpCoD mm 500 *
condensate cut-out
29. Center of condenser support Pad CsPdCL mm 3575 *
30. Width of condenser support Pad CsPdW mm 900 *
31. Thickness of condenser support Pad CsPdTk mm 20 *
32. Size of Bottom Plate I-Beam BpISMB mm 400 *
33. Width of I-beam Flange BpIbFW mm 140 *

* Optional user input ** Input taken by program other than expressions 1


Bottom Plate (160-11)

34. Thickness of I-Beam Flange BpIbFTk mm 16 *


35. Thickness of I-Beam Web BpIbWTk mm 8.9 *
36. Radius on I-Beam Flange BpIbFR mm 7 *
37. Radius on I-Beam Web BpIbWR mm 14 *
38. Radius of Bottom plate corners Cr5 mm 50 *
39. Width of Lifting Lug LgW mm 180 **
40. Height Of Lifting Lug LgHt mm 140 **
41. Thickness of Lifting Lug LgTk mm 50 **
42. Diameter of Lifting Lug Hole LgHD mm 47 **
43. Radius of Lifting Lug LgR mm 70 **
44. Hole radius of lifting lug LgHr m 3 **
45. Chamfer of Lifting Lug edge LgC mm 3 **
46. Length of Bottom Plate gusset plate BpGpL mm 400 *
47. Thickness of Bottom Plate gusset plate BpGpTk mm 16 *
48. Site margin Sm mm 20
49. Weld root for less than 50mm Plates Wr1 mm 2 **
50. Weld root for more than 50mm Plates Wr2 mm 3 **
51. V-Butt welding Edge angle Edge1 deg 30 **
52. Single Bevel Butt welding Edge angle Edge2 deg 50 **
53. Chamfer angle on edges Edge3 deg 45 **

* Optional user input ** Input taken by program other than expressions 2

You might also like