Bottom-feed, Overlock / Safety Stitch Machine

for Extra Heavy-weight Materials

MO-6900G Series
Variable Top-feed, Overlock / Safety Stitch Machine
for Extra Heavy-weight Materials

MO-6900J Series

MO-6916J
An advanced full-featured machine that
is ideally suited to the sewing of
extra heavy-weight materials.
The machine incorporates a mechanism and parts that
are optimum for the sewing of extra heavy-weight
materials, such as an extra high-lift type upper looper,
tractor foot and coarse type feed dog.
It demonstrates an excellent performance ability in the
sewing of various kinds of heavy-weight materials such
as jeans, raised fabric materials, mats and carpets. MO-6916G

● The machine securely clamps the material ● The MO-6900J Series comes with a newly- ● The machine incorporates mechanisms
at the beginning of sewing as well as developed feed mechanism that moves that are both durable and reliable, such
smoothly sewing multi-layered parts of the top and bottom feeds separately. as the needle bar mechanism, utilyzing
the material to facilitate the sewing of With its improved feeding capacity and the upper and lower bushings, a
extra heavy-weight materials. stronger cloth-biting force, the feed cartridge type oil filter and cooling fan.
mechanism prevents uneven material ● The machine is equipped as standard
feed when sewing extra heavy-weight with a micro-lifter that helps reduce
materials. operator fatigue. The micro-lifter is
designed to achieve optimum balance,
not only reducing noise and vibration
but also ensuring comfortable operation.
● Needle thread heat remover and needle
cooler prevent stitching troubles during
times of high-speed sewing, thereby
contributing to upgraded seam quality.
● The machine comes standard with
various adjusting mechanisms, such as
a micro-adjusting mechanism, all of
which can be easily adjusted to enable
the machine to perform sewing under
the best-suited conditions for any kind
MO-6916G-FH6-700 MO-6916J-FH6-700 of material.

■ SUBCLASS MACHINE LIST

Number Longitudinal Presser Max. Remarks

Number Number Needle Overedging of Stitch Bottom stroke lifting sewing
Model No. Materials of of gauge width (mm) feed dog length differential- of top-feed amount Needle system speed
needles threads (mm) rows (mm) feed ratio dog (mm) (mm) (rpm)

MO-6900G Series
MO-6903G-0N6-3D1 L∼M 1 2 − 18.0 3 7    − − 5 DO×5 #16 5,500 For splicing fabrics
For runstitching
MO-6904G-0F6-700 1 3 − 4.8 3 5 1:0.7∼1:1.75 − 8 DO×5 #21 6,000 extra heavy- weight
materials such as denim
For overedging carpets,
MO-6905G-0M6-700 1 3 − 10.0 3 7    − − 7 DC×1 #24 4,000
mats for entrance halls, etc.
EH
MO-6905G-0M6-7E0 1 3 − 10.0 3 7    − − 7 DC×1 #24 4,000 For overedging car mats
MO-6914G-CH6-700 2 4 2.6 6.4 3 4 1:0.8∼1:2 − 8 DO×5 #18 6,000 For overedging jersey, etc.
MO-6916G-FF6-700 2 5 4.8 4.8 3 5 1:0.7∼1:1.75 − 8 DO×5 #21 6,000 For safety stitching extra
heavy-weight materials
MO-6916G-FH6-700 2 5 4.8 6.4 3 5 1:0.7∼1:1.75 − 8 DO×5 #21 6,000 such as denim

MO-6900J Series
For runstitching
MO-6904J-0F6-700 1 3 − 4.8 3 5 1:0.7∼1:1.75 2.7∼7 8 DO×5 #21 6,000 extra heavy- weight
materials such as denim
MO-6914J-CH6-700 2 4 2.6 6.4 3 4 1:0.8∼1:2 2.7∼7 8 DO×5 #18 6,000 For overedging jersey, etc.
EH
MO-6916J-FF6-700 2 5 4.8 4.8 3 5 1:0.7∼1:1.75 2.7∼7 8 DO×5 #21 6,000 For safety stitching extra
heavy-weight materials
MO-6916J-FH6-700 2 5 4.8 6.4 3 5 1:0.7∼1:1.75 2.7∼7 8 DO×5 #21 6,000 such as denim
MO-6916J-FF6-70Q 2 5 4.8 4.8 3 5 1:0.7∼1:1.75 2.7∼7 8 DC×27 #16 6,000 For safety stitching bathrobe, etc.
■ DEVISES AND ATTACHMENTS
MO- MO-
Model Part No. Description [Reference]
6900G 6900J
Combination table of “chain-off thread suction device”
● Chain-off thread trimming device and “auto-lifer” which correspond to “chain-off thread
MAT-039001A0 For 110, 115, 220, 240V trimming device”.
One-touch type tape cutter and 〇 −
MAT-039002A0 For 220, 380, 415, 440V
T039 chain-off thread trimming device
MAT-039003A0 (electromagnetic type) For 110, 115, 220, 240V Chain-off Chain-off
− 〇 thread thread
MAT-039004A0 For 220, 380, 415, 440V Auto-lifter
trimming suction
MAT-040001A0 For semi- For 110, 115, 220, 240V device device
MAT-040002A0 sunken type For 220, 380, 415, 440V
〇 − MC-8 AK101 (JUKI servomotor)
MAT-040001AA Automatic tape cutter + For fully- For 110, 115, 220, 240V T039
chain-off thread trimming − (MC-9 is equipped
MAT-040002AA sunken type For 220, 380, 415, 440V MC-9
T040 device (number-off-stitch with auto-lifter.)
MAT-040005A0 control and For semi- For 110, 115, 220, 240V
MAT-040006A0 electromagnetic type) sunken type For 220, 380, 415, 440V
− 〇 MC-5 AK32 (any motor will do)
MAT-040005AA For fully- For 110, 115, 220, 240V T040
MAT-040006AA sunken type For 220, 380, 415, 440V MC-24 AK32 (any motor will do)
MAT-048010A0 〇 −
T048 Pneumatic flat cutter (for overlock stitch machine)
MAT-048010B0 − 〇 MC-4 −
MAT-050010A0 〇 − T041S
T050 Pneumatic flat cutter (for safety stitch machine) or MC-8 AK101 (JUKI servomotor)
MAT-050010B0 − 〇 T042S − (MC-9 is equipped
MC-9
● Pneumatic chain-off thread suction device with auto-lifter.)
MC-4 − Specific to chain-off thread, pedal-operated 〇 〇
MC-5 − Specific to chain-off thread 〇 〇
MC-8 − Pneumatic chain-off thread + cloth chips 〇 〇
MC-9 − Function of MC-8 + auto-lifter 〇 〇
MC-24 − Pneumatic chain-off thread + cloth chips 〇 〇
＊The aforementioned devices are not equipped with air regulator. Please purchase the following
components when you need to regulate air pressure.
− PF-0552010-B0 Air regulator (F.R. unit asm.) 〇 〇
− GMD-01080000×2 Fixing screw for F.R. unit asm. 〇 〇
− F1021-003-000 Tube connector (male) 〇 〇
One-touch connector
− GAS-12063000＊ 〇 〇
＊Selection parts instead of the tube connector

● Auto-lifter
AK32 GAK-320000A0 Pneumatic type (knee-operated) 〇 〇
AK49 GAK-490000A0 Pneumatic type (pedal-operated) 〇 〇
AK52 GAK-520000A0 Pneumatic type (with chain-off thread suction device) 〇 〇
AK101 GAK-A01000A0 Pneumatic type (for servomotor) 〇 〇

■ WHEN YOU PLACE ORDERS

Please note when placing orders, that the model name should be written as follows:

MO69 G

Stitch type U.S.A Code Type Code Needle Overedging Remarks Code
Feed dog Code
gauge (mm) width (mm)
For splicing fabrics 503 03 Extra heavy-weight For splicing fabrics 3D1
G
materials – 18.0 3-row 0N6
1-needle overlock 504 04 For extra heavy-weight
– 4.8 3-row 0F6 materials 700
For overedging carpets 505 05 (jeans, car mats etc.)
– 10.0 3-row 0M6
2-needle overlock 514 14 For car mats 7E0
2.6 6.4 3-row CH6
2-needle safety stitch 516 16
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6

MO69 J

Stitch type U.S.A Code Type Code Needle Overedging Remarks Code
Feed dog Code
gauge (mm) width (mm)
1-needle overlock 504 04 Variable top-feed for For extra heavy-weight
extra heavy-weight J – 4.8 3-row 0F6 materials 700
2-needle overlock 514 14
materials (jeans, car mats etc.)
2.6 6.4 3-row CH6
2-needle safety stitch 516 16
For extra heavy-weight
4.8 4.8 3-row FF6 70Q
materials (bathrobe etc.)
4.8 6.4 3-row FH6
● To order, please contact your nearest JUKI distributor.
■ SPECIFICATIONS
MO-6900G Series
Model name MO-6904G MO-6914G MO-6916G
Stitch type 1-needle overlock 2-needle overlock Safety stitching
Stitch style in the U.S.A. 504 514 516
Max. sewing speed 6,000rpm
Stitch length 2.5∼5mm 2.5∼4mm 2.5∼5mm
Needle gauge (mm) − 2.6 4.8
Overedging width (mm) 4.8, 10.0, 18.0 6.4 4.8, 6.4
For gathering 1:1.75 (max. 1:3.8) For gathering 1:2 (max. 1:3.8) For gathering 1:1.75 (max. 1:3.8)
Differential feed ratio
For stretching 1:0.7 (max. 1:0.6) For stretching 1:0.8 (max. 1:0.6) For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 28.8mm
Inclination angle of the needle 20°
Needle bar bushing Upper/lower bushing method
Needle DO×5 (excluding some subclass model)
Max. lift of the presser foot 8mm (excluding some subclass model)
Max. presser foot pressure 63.7N (6.5kg)
Stitch adjusting method By push-button
Differential-feed adjusting method By lever (with micro-adjustment)
Weight of the machine head 28kg
Lubrication Automatic
Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
Needle cooler Provided as standard (excluding some subclass model)
Needle thread heat remover Provided as standard
Micro-lifter Provided as standard

MO-6900J Series
Model name MO-6904J MO-6914J MO-6916J
Stitch type 1-needle overlock 2-needle overlock Safety stitching
Stitch style in the U.S.A. 504 514 516
Max. sewing speed 6,000rpm
Stitch length 2.5∼5mm 2.5∼4mm 2.5∼5mm
Needle gauge (mm) − 2.6 4.8
Overedging width (mm) 4.8 6.4 4.8, 6.4
For gathering 1:1.75 (max. 1:3.8) For gathering 1:2 (max. 1:3.8) For gathering 1:1.75 (max. 1:3.8)
Bottom differential feed ratio
For stretching 1:0.7 (max. 1:0.6) For stretching 1:0.8 (max. 1:0.6) For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 28.8mm
Inclination angle of the needle 20°
Needle bar bushing Upper/lower bushing method
Needle DO×5 (excluding some subclass model)
Vertical stroke of top feed dog 8.5mm
Longitudinal stroke of top feed dog 2.7∼7mm (it differs with the machine's specifications.)
Max. lift of the presser foot 8mm (excluding some subclass model)
Max. presser foot pressure 63.7N (6.5kg)
Stitch adjusting method By push-button
Bottom differential feed adjusting method By lever (with micro-adjustment)
Top differential feed adjusting method By lever (with micro-adjustment)
Weight of the machine head 29kg
Lubrication Automatic
Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
Needle cooler Provided as standard
Needle thread heat remover Provided as standard
Micro-lifter Provided as standard

HEAD OFFICE
The environmental management system to promote and conduct
➀the technological and technical research, the development and
design of the products in which the environmental impact is
considered,
➁the conservation of the energy and resources, and the recycling,
in the research, development, design, distribution, sale and
maintenance service of the industrial sewing machines,
EMS Accreditation ISO14001:2004 household sewing machines and industrial-use robots, etc. and
RE005 REG.NO.JSAE389 089 in the sale and maintenance service of the data entry system
and in the purchase, distribution and sale of the household
commodities including the healthcare products.

8-2-1, KOKURYO-CHO, CHOFU-SHI,

TOKYO 182-8655, JAPAN
PHONE : (81) 3-3480-2357, 2358
FAX : (81) 3-3430-4909
MARKETING & SALES H.Q. http://www.juki.com
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalog is printed on recycle paper.
APRIL, 2003 Printed in Japan(AD)