Scribd Logo
Upload

Welcome to Scribd!

  • 266 views

    Sfp-400B Fire Alarm System: Operating Instructions

    Uploaded by

    saad
    This document provides operating instructions for an SFP-400B fire alarm system. It outlines what to do in the event of an alarm or trouble, how to silence audible devices, return the system to normal operation after an alarm, and test LEDs. Contact information is also provided for the local service representative in the event of trouble with the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sfp-400B Fire Alarm System: Operating Instructions

    Uploaded by

    saad
    266 views1 page
    This document provides operating instructions for an SFP-400B fire alarm system. It outlines what to do in the event of an alarm or trouble, how to silence audible devices, return the system to normal operation after an alarm, and test LEDs. Contact information is also provided for the local service representative in the event of trouble with the system.

    Original Title

    15362

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides operating instructions for an SFP-400B fire alarm system. It outlines what to do in the event of an alarm or trouble, how to silence audible devices, return the system to normal operation after an alarm, and test LEDs. Contact information is also provided for the local service representative in the event of trouble with the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    266 views1 page

    Sfp-400B Fire Alarm System: Operating Instructions

    Uploaded by

    saad
    This document provides operating instructions for an SFP-400B fire alarm system. It outlines what to do in the event of an alarm or trouble, how to silence audible devices, return the system to normal operation after an alarm, and test LEDs. Contact information is also provided for the local service representative in the event of trouble with the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SFP-400B FIRE ALARM SYSTEM

    Operating Instructions

    NORMAL - Only the GREEN A.C. POWER LED is on. All other PANEL KEY - The key to open the panel can be found at this
    LED's are off. location.

    WHEN AUDIBLE DEVICES ARE SOUNDING -


    FOR AN ALARM

    1. Evacuate the protected area

    2. Notify the monitoring service and/or the Fire Department immediately. Tell them briefly what happened and what
    your current status is.

    Phones: ____________________________ _________________________________


    Fire Department Monitoring Service

    3. If the Fire Department is responding, be prepared to provide directions to arriving firefighters.

    FOR TROUBLE ONLY

    1. Notify the monitoring service and/or Fire department if this panel is connected to either one, and tell them
    what is happening.

    2. Silence audible devices by unlocking and opening the panel and pressing the TONE SILENCE switch. The
    yellow SYSTEM TROUBLE LED will remain on. Contact authorized service personnel immediately! (See Below).

    WARNING
    DO NOT ALLOW TROUBLE CONDITIONS TO REMAIN LOGGED IN THE SYSTEM.
    THE PROTECTION THE SYSTEM OFFERS HAS BEEN COMPROMISED,
    OR ELIMINATED WHEN A TROUBLE CONDITION EXISTS.

    To Return to Normal After an Alarm - Manual activation (Fire Drill or otherwise)-


    1. Do not enter the protected are until safe to do so. Alarm Signalling Circuits can be activated by pressing the
    2. Clear all initiating devices. Smoke detectors will not reset ALARM ACTIVATE switch.
    if there is still smoke in the area.
    3. Reset the control panel (PRESS the RESET switch) NOTE: May want to disconnect municipal box by sliding
    DISCONNECT switch, located on 4XTM module, to its
    Power Failure or Brownout - DOWN position.
    If AC power drops too low or fails, the POWER ON LED will go out,
    the SYSTEM TROUBLE LED will turn on, and the panel buzzer and Alarm Silencing -
    any other audible trouble devices will sound. Contact authorized Alarm Signalling Circuits may be silenced by pressing the
    service personnel immediately. See below. ALARM SILENCE switch. The ALARM SILENCED LED will turn
    on. Subsequent alarms will reactivate circuits. Press the RESET
    switch to clear the "silenced" condition.

    In the event of trouble, contact the NOTE: ALARM SILENCE switch may be disabled by
    NOTIFIER local Notifier Service Representative dipswitch selection (see manual)

    To test the lamps


    Name: ___________________________________ Press and hold the RESET switch and check all the LED's. Every
    one should be on as long as the switch is held on.
    Company: _______________________________ For more information, refer to the SFP-400 manual. It is kept in
    the following location:
    Address: _________________________________
    Telephone Number: ______________________ FRAME AND POST ADJACENT
    TO THE PANEL
    Document #15362 Rev A 08/27/97 P/N 15362:A

    You might also like