Scribd
Upload
29 views4 pages

Unlocking Steps For DJI GO 4 V2

The document provides steps to unlock Red Zones with DJI GO 4. It notes that the mobile device must be connected to the internet during the first four steps. The first four steps of downloading and importing the unlocking license can be done outside the unlocking area. Once imported, the license remains stored on the aircraft until replaced. It then outlines the six steps to unlock an area, which involves powering on the aircraft, connecting the mobile device, downloading and importing the license, placing the aircraft in the area, enabling the license, and verifying the unlocked area on the map.

Uploaded by

alissonafs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views4 pages

Unlocking Steps For DJI GO 4 V2

The document provides steps to unlock Red Zones with DJI GO 4. It notes that the mobile device must be connected to the internet during the first four steps. The first four steps of downloading and importing the unlocking license can be done outside the unlocking area. Once imported, the license remains stored on the aircraft until replaced. It then outlines the six steps to unlock an area, which involves powering on the aircraft, connecting the mobile device, downloading and importing the license, placing the aircraft in the area, enabling the license, and verifying the unlocked area on the map.

Uploaded by

alissonafs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Notes:

 To unlock Red Zones with DJI GO 4, the mobile device must be connected to the Internet
during steps 1 to 4. And it is recommended to use an iPhone if using a Spark as Android
devices can’t access cellular networks while connected to Wi-Fi.
 Steps 1 to 4 can be done outside of the unlocking area, so please do it at home if there will
be no internet connection in the unlocking area.
 The unlocking license will still be stored in aircraft after importing unless it’s replaced by
another one, which means you can manage the license ON or OFF even with another DJI
account.

Step 1: Power on the aircraft and remote controller and ensure that the remote controller has
been linked to the aircraft successfully.

Step 2: Connect the device to the remote controller with a USB cable (connect to the Wi-Fi if
using a Spark). Launch DJI GO 4 (V4.2.8 or later) and log into the DJI account that was submitted
while requesting the custom unlocking online.

Step 3: Go to the camera view and General Settings. Tap “Unlocking List”—>”App”.
Step 4: Tap “Sync”, then the unlocking license will be shown on the Unlocking License List
screen. Choose the license and tap “Import to Aircraft”. Once the license is uploaded
successfully, you will be able to turn it on or off on the Aircraft page.
Step 5: Place the aircraft in the area that you requested to be unlocked. When the number of
GPS satellites connected reaches more than 10, tap “Unlocking List”—>”Aircraft” and slide the
switch to the right to enable it. Now, the area is unlocked.
Step 6: When the switch is turned on, go to the map view in DJI GO 4, and a green zone will be
shown on the map indicating the area that you have requested to unlock. You can only fly the
aircraft within the green zone. To fly outside of the green zone, turn off the switch in DJI GO 4.

You might also like