Scribd
Upload
278 views2 pages

PC40MR-2: Introductory

Uploaded by

Frederikus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
278 views2 pages

PC40MR-2: Introductory

Uploaded by

Frederikus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FLYWHEEL HORSEPOWER

29.4 kW 39.4 HP @ 2350 rpm


OPERATING WEIGHT
4790 kg 10,560 lb

INTRODUCTORY

PC40MR-2

Photo may show optional equipment

New Compact-Size Tight Tail Swing Model

• The Newest Member of the MR “Tight Tail + Swing Boom” Family


• Excellent for Work in Confined Areas
• Provides for Safer Operation and Greater Productivity
• Large entrance and foot space for comfortable operation
• Tilt-up operator component for easy access
ENGINE DRIVES AND BRAKES
Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu 4D88E-5 Steering control. . . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hydraulic motors . . . . . . . . . Variable displacement, axial piston motors
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 2.189 ltr 134 in3 Maximum drawbar pull . . . . . . . . . . . . . . . . 42.0 kN (4280 kg) 9,435 lb
Flywheel horsepower . . . . . . . . . . . . . 29.4 kW 39.4 HP @ 2350 rpm Maximum travel speed: High . . . . . . . . . . . . . . . . .4.6 km/h 2.9 mph
(SAE J1349 NET) (Auto-Shift) Low . . . . . . . . . . . . . . . . .2.8 km/h 1.7 mph
Parking brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
HYDRAULIC SYSTEM

Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) UNDERCARRIAGE


system, closed-center system with load-sensing and
Track adjustments of the track tension . . . . . . . . . . . . . . . . . . . Grease
pressure compensated valves
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . 1 each side
Main pump:
Number of track rollers (each side): . . . . . . . . . . . . . . . . . . 4 each side
Type . . . . . . . . . . . . . . . . . . . . . Variable displacement axial piston
Ground Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 0.28 kg/cm2 4.0 psi
Maximum flow . . . . . . . . . . 51 ltr x 2=102 ltr/min 26.9 U.S. gal/min
Type for machine with blade . . . . . . . . . . Fixed displacement gear
Maximum flow . . . . . . . . . . . . . . . . . . . 32 ltr/min 8.5 U.S. gal/min COOLANT AND LUBRICANT
Auxiliary hydraulic flow . . . . . . . . . . . . 70 ltr/min 18.5 U.S. gal/min CAPACITY (REFILLING)
Valve rating:
Relief valve setting: . . . . . . . . . . . . . . . . . . . 270 kg/cm2 3,840 psi Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ltr 17.2 U.S. gal
Bucket digging force (ISO) . . . . . . . . . . . . . . . . . 3460 kg 7,630 lb Radiator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3 ltr 1.9 U.S. gal
Arm crowd force Engine Oil (Exchange) . . . . . . . . . . . . . . . . 7.4–8.0 ltr 2.0–2.1 U.S. gal
With arm length 1440 mm 4'9" . . . . . . . . . . . . . . 2200 kg 4,850 lb Hydraulic (Exchange) . . . . . . . . . . . . . . . . . 20–55 ltr 5.3–14.5 U.S. gal

ELECTRICAL SYSTEM OPERATING WEIGHT (APPROXIMATE)

Operating voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V Operating weight including 1440 mm 4'9" arm, bucket with
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Ah 0.14 m3 0.18 yd3 ISO 754 capacity, blade, operator weight, liquids, full
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 A fuel tank, and standard equipment.
Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kW

SWING SYSTEM
PC40MR-2 Shoe Width Operating Weight
Driven method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
With blade 400 mm 15.7" 4,790 kg 10,560 lb
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 rpm

DIMENSIONS WORKING RANGE

2270 mm 7'5''
50º
630 mm 880 mm
24.8'' 34.6''

mm
1060
3'6''
5570 mm 18'3''

85
3860 mm 12'8''

1835 mm º
6' 0''
430 mm
1'5''
2625 mm 8'7''

5710mm 18'9''
330 mm
3500 mm 11'6''

1'1''
2770 mm 9'1''

5870 mm 19'3''

400 mm 15.7''

1960 mm 6'5''
2520 mm 8'3''

KUSS158-00 ©2003 Komatsu (Electronic View) DK10 (Electronic View) 10/03 (EV-1)

440 N. Fairway Drive


P.O. Box 8112
Vernon Hills, IL 60061-8112

www.komatsuutility.com Materials and specifications are subject to change without notice


is a trademark of Komatsu Ltd. Japan

You might also like