Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    CLG 856 Bsiii: Wheel Loader

    Uploaded by

    sanhory musa
    This document provides specifications for the CLG 856 BSIII Wheel Loader. It has a Cummins US engine that produces 164 kW of power. The operating weight is 17,100 kg with a maximum payload of 5,000 kg. Standard bucket sizes range from 1.8-4.5 cubic meters. It has an air conditioned cabin.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CLG 856 Bsiii: Wheel Loader

    Uploaded by

    sanhory musa
    148 views2 pages
    This document provides specifications for the CLG 856 BSIII Wheel Loader. It has a Cummins US engine that produces 164 kW of power. The operating weight is 17,100 kg with a maximum payload of 5,000 kg. Standard bucket sizes range from 1.8-4.5 cubic meters. It has an air conditioned cabin.

    Original Title

    1329898303348

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the CLG 856 BSIII Wheel Loader. It has a Cummins US engine that produces 164 kW of power. The operating weight is 17,100 kg with a maximum payload of 5,000 kg. Standard bucket sizes range from 1.8-4.5 cubic meters. It has an air conditioned cabin.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views2 pages

    CLG 856 Bsiii: Wheel Loader

    Uploaded by

    sanhory musa
    This document provides specifications for the CLG 856 BSIII Wheel Loader. It has a Cummins US engine that produces 164 kW of power. The operating weight is 17,100 kg with a maximum payload of 5,000 kg. Standard bucket sizes range from 1.8-4.5 cubic meters. It has an air conditioned cabin.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CLG 856 BSIII

    Wheel Loader

    Engine CUMMINS US

    Gross Power 164 kW (220hp) @2,200 rpm

    Operating Weight 17,100 Kg

    Pay Load 5,000 Kg


    3
    Bucket Sizes 1.8-4.5 m

    Standard Breakout Force 158 kN

    Standard Dump Clearance 3,100 mm

    Cabin Air Conditioned

    www.liugong.com
    CLG856 BSIII
    Wheel Loader
    ENGINE QSB 6.7 LOADER PERFORMANCE WITH STANDARD BUCKET
    Tier BS III Tipping Load 13,200 kg
    Make CUMMINS US Full turn Tipping Load 11,750 kg
    Gross Power 164 kW ( 220 hp) @ 2,200 rpm Bucket Breakout Force 158 kN
    Net Power 157 kW ( 210 hp) @ 2,200 rpm Maximum Dump Angle at Full Height 45°
    Peak Torque 949 N.m @ 1,500 rpm Dump Clearance at Full Height Discharge 3,100 mm
    Displacement 6.7 L Dump Reach at Full Height Discharge 1,035 mm
    Number of Cylinders 6 Maximum Hinge Pin Height 4150 mm
    Aspiration Turbo air - to - air aftercooled Maximum Digging Depth, Bucket Level 61 mm
    Bucket Rollback at Ground Level 45°
    TRANSMISSION ZF4WG 200 Bucket Rollback at Carry 50°
    Transmission Type Fixed Shaft type Power Shift Bucket Rollback at Maximum Height 60°
    Transmission Configuration Counter Shaft
    Torque Converter Single - stage, three - element BUCKET CAPACITY
    Maximum Travel Speed, fwd 37 km/h Standard 3.0 m3
    3
    Options 1.8 m - 4.5 m 3
    Maximum Travel Speed, rev 24 km/h
    Number of Speeds, fwd 4 DIMENSIONS
    Number of Speeds, rev 3 Length with Bucket Down 8060 mm
    Width Over Tyres 2,750 mm
    AXLES ZF AP400 Wheel base 3,250 mm
    Differential Front Type Limited Slip Optional Wheel Tread 2,150 mm
    Differential Rear Type Limited Slip Optional Ground Clearance 431 mm
    Axle Oscillation 14° Turn Angle, Either Side 38°
    Rear Angle of Departure 30°
    STEERING Turning Radius, Outside of Tyre 6,232 mm
    Steering Pump Type Gear Turning Radius, Center o f Tyre 5,932 mm
    Steering Configuration Articulated Turning Radius, Bucket Carry 6,913 mm
    Steering Relief Pressure 163 Kg/cm2
    TYRES
    BRAKES Tyre Size 23.5 - 25, 20 PR
    Service Brake Type Full Hydraulic Wet
    Service Brake Actuation Multiple Disc Brake OPERATING WEIGHTS
    Parking Brake Type Auto and manual electronic controlled Operating Weight 17,100 kg
    Parking Brake Actuation Spring apply; Hydraulic release
    SERVICE CAPACITIES
    HYDRAULIC SYSTEM Fuel Tank 320 L
    Controls Pilot Operated Engine Oil 22 L
    Main Pump Type Gear Cooling System 56 L
    Main Relief Pressure 203.9 Kg/cm2 Hydraulic Reservoir 210 L
    Raise 5.8 sec Transmission and Torque Converter 45 L
    Dump Time 1.3 sec Axles, each 36 L
    Float Down Time 3.0 sec
    Minimum Cycle Time 10.1sec CABIN
    Protection System FOPS/ROPS Cab
    Mounting Anti Vibration Pads

    8060

    Liugong India Pvt. Ltd. Plant Address: Authorized Dealer


    Registered Office: Plot No. 163, Industrial Area
    LIPL/856 BSIII/07/11

    64, Okhla Industrial Estate, Phase III Sector-III, Pithampur


    New Delhi-110020 Dist.- Dhar, Madhya Pradesh-454774
    Tel.: 011-47272200, Fax: 011-47272220 Tel.: 07292-416700, Fax: 07292-416701
    www.liugong.com
    [email protected]

    Specifications and designs are subject to change without notice. Machines shown may include optional equipment.

    You might also like