0% found this document useful (0 votes)
78 views2 pages

Connector: 1.2mm Pitch/disconnectable Crimp Style Connectors

This document provides specifications for the ACHF CONNECTOR, a compact and low profile 1.2mm pitch crimp style connector. It has a current rating of 2.5A for power supply circuits and 1A for signal circuits. Additional details provided include voltage rating, temperature range, contact resistance, insulation resistance, applicable wire size, and standards compliance. Dimensions and assembly details are shown in diagrams.

Uploaded by

Trần Long Vũ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
78 views2 pages

Connector: 1.2mm Pitch/disconnectable Crimp Style Connectors

This document provides specifications for the ACHF CONNECTOR, a compact and low profile 1.2mm pitch crimp style connector. It has a current rating of 2.5A for power supply circuits and 1A for signal circuits. Additional details provided include voltage rating, temperature range, contact resistance, insulation resistance, applicable wire size, and standards compliance. Dimensions and assembly details are shown in diagrams.

Uploaded by

Trần Long Vũ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Emboss Tape

ACHF CONNECTOR
1.2mm pitch/Disconnectable Crimp style connectors

Specifications –––––––––––––––––––
• Current rating: 2.5 A AC, DC (AWG #28)
(Signal circuit of 4 and 6 circuits is 1.0 A.)
Current unit: A
Circuit No.
1 2 3 4 5 6
No. of circuits
3 2.5 2.5 2.5
4 2.5 1.0 1.0 2.5
6 2.5 2.5 1.0 1.0 2.5 2.5

• Voltage rating: 50 VAC, DC


• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 20 mΩ max.
• Insulation resistance: 100 Ω min.
• Withstanding voltage: 500 VAC/minute
• Applicable wire: Conductor size/ AWG #30 to #28
Insulation O.D./ 0.5 to 0.63 mm
This ACHF connector is compact and low * Refer to "General Instruction and Notice when using
profile type, height 1.43mm and width 4.95mm, Terminals and Connectors" at the end of this catalog.
1.2mm pitch wire-to-board connector. * Contact JST for details.
• High-strength * Compliant with RoHS.
• Top entry but side feed type
• Connector for power supply Standards–––––––––––––––––––––––
(Power supply circuit: 2.5 A, Signal circuit: 1.0 A ) 0 Recognized E60389

PC board layout and Assembly layout


5.1±0.03
3.25 ±0.03
2.9 ±0.03
1.05 ±0.03
+0.1
0
0.6
0.7 ±0.05

1.2 ±0.05

4.95
A±0.05
B ±0.05

(1.43)

1.1±0.03 Dimensions (mm)


Circuits
A B
3 2.4 5.5
4 3.6 6.7
Connector outline 0.35 6 6.0 9.1

Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details.

Contact
Applicable wire
Model No. Insulation O.D. (mm) Q'ty/reel
mm2 AWG#
SACHF-003GAC-P0.2 0.05∼0.08 30∼28 0.5∼0.63 40,000

3.55 Material and Finish


1.45
Copper alloy, nickel-undercoated, gold-plated
0.7 1.2
0.85 RoHS compliance
0.5

Crimping Applicator
Contact machine Crimp applicator Dies Crimp applicator with dies
MKS-L-10-4 MK/SACHF-003-02 APLMK SACHF003-02
SACHF-003GAC-P0.2 AP-K2N
  ―   ― ―

1
ACHF CONNECTOR

Housing
Dimensions (mm) Q'ty/
Circuits Model No. bag
A B
Circuit No.1 mark
3 ACHFR-03V-H 2.4 3.8 1,000
4 ACHFR-04V-H 3.6 5.0 1,000
6 ACHFR-06V-H 6.0 7.4 1,000
1.2
B
A

Material

PBT, UL94V-HB, gray

RoHS compliance

3.95 0.5
1.2

Shrouded header
Dimensions (mm) Q'ty/
Circuits Model No.
A B reel
Circuit No.1 mark
3 BM03B-ACHFKS-GACN-ETF 2.4 6.1 6,000
4 BM04B-ACHFKS-GACN-ETF 3.6 7.3 6,000
6 BM06B-ACHFKS-GACN-ETF 6.0 9.7 6,000
1.2

Material and Finish


B
A

Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe)


Housing: Heat resisting resin, UL94V-0, black
Reinforcement: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
3

RoHS compliance This product displays (LF)(SN) on a label.


Note: The products listed above are supplied on embossed-tape.

4.95
1.43

You might also like