VARIABLE

SPEED DRIVE
SD250

• Ranging from 0.4kW to 22kW, 200-230V and 380-480 Vac

• Easy programming and monitoring through cursors and digital display,
removable up to 5m
• Wide range of accessories: RFI filter, harmonic filters, dV/dt output filter,
Profibus gateway, Ethernet gateway and DeviceNET module
• Conformally coated electronics, IP20 protection and operation up to 50° C
• 3 year warranty and 24h service and replacement commitment

32-33
 05.

SD250 SERIES
The SD250 series from Power Electronics is a compact and versatile
variable speed drive suitable for multiple low power applications, by
offering a competitive solution where many units are required.

Divided in six frame sizes, this intuitive VSD covers a range from
0.4kW to 22kW and offers a wide range of accessories such as
RFI filter, filters dV/dt, input filters and display extension kits that
complete its standard features.

Our technicians will give you telephonic assistance 24h/7d during

installation and commissioning, and if necessary our committment to
repair or replace the unit guarantees the success of your operation.

THE MOST PROFITABLE

SOLUTION TAILORED
YOUR FACILITIES
 Discovering SD250

EASY LOCAL AND

REMOTE USED
CONFORMAL COATING Thanks to its intuitive programming console the
Protects the sensitive electronic equipment from commissioning process becomes simple.
moisture, dust and corrosive gases, reducing
maintenance and increasing their reliability. By using the Modbus-RTU (RS-485) serial
communication, you will be able to check the operating
status (voltage, current, frequency, etc) and to modify
the running parameters of your system (frequency ramp,
max. frequency, PID reference, etc.).

DISPLAY
EXTENSION KIT
SD250 offers the possibility to install the
display up to 5m away from the drive.
Install SD250 display in the front door of
the cabinet and you can safely operate
the unit.

EASY INSTALLATION
AND SERVICING
Two holes allow the user to screw the unit to a panel PARAMETER READING, COPYING
mounted in your cabinet. The rear cooling fans can AND WRITING FUNCTIONS ALLOW
be easily removable from the bottom part and the
front connections reducing wiring complexity. A QUICK AND EASY PROGRAMMING
OF MULTIPLE UNITS

34-35
 05.

SD250 SERIES
STATUS
INDICATION LEDS

SEGMENTS DISPLAY DISPLAY DESCRIPTION

RUN Run command

LOCAL STOP/ STOP/
Stop command. Reset faults
RESET RESET

Parameters scrolling

BUTTON
Parameters scrolling

Groups scrolling

Groups scrolling

Confirmation and enter

FWD Lit during forward run

REV Lit during reverse run

LED

RUN Lit during operation

CURSOR
SET Lit during parameter
INTEGRATED
MEMORY

RUN

APPLICATIONS. The SD250 variable speed drives from Power Electronics are designed to
cover a wide range of applications. They are suitable for industries such as water treatment,
food and beverage, ventilation systems, material processing, lifting systems, textiles, plastic,
wood and chemistry.

LOW VOLTAGE / POWER ELECTRONICS

 Control and precision
The SD250 is present in all industries, where motor protection, high accuracy and easy to install are the
minimum requirements of system integrators or original equipment manufacturers.

36-37
36-36
 Par
(%)
05.
Tmáx.
The open-loop vector

SD250 SERIES
control provides excellent
control as well as powerful
torque.
Tarranque

Ve
lo
50% cid
ad
(H
z)

1Hz 10Hz 40Hz 50Hz 60Hz

BUILT-IN PID CONTROL

This function enables the control of a wide variety of system variables: flow,
pressure, temperature, etc., without any additional external controller.

SYSTEM SET-POINT

Feedback signal

PID CONTROLS Control

THE SYSTEM loop

PUMP PRESSURE
TRANSDUCER

ENERGY SAVING
The variable speed drives reduce the energy consumption of the motor
according to the demand of the system. They can save up to 70% of the
energy consumption and reduce the maintenance task on your facility.

ROBUST DESIGN AND EASY INSTALLATION

The SD250 series of Power Electronics can operate at temperatures up
to 50°C without derating or 150% overload, enabling its use in adverse
conditions. It also protects the motor against any grid anomaly.

Its compact and book type design, a rear cooling system and its frontal
connections enable the user to install easily multiple units in a compact
cabinet.

LOW VOLTAGE / POWER ELECTRONICS

 Technical Characteristics
Wiring control
Power range 0,4kW - 22kW
Voltage power 200-230Vca, 380-480Vca (-15% a +10%) (trifásico)
Input frequency 50~60 Hz ±5%
INPUT
EMC/RFI Filter Class 2
Harmonics filter Three phase and external dc optional
Input rectifier technology Diode
Overload capacity 150% during 60 sec.
Frequency ratings 400Hz
Control Method V/Hz control, Vector control (Sensorless)
Efficiency >98%
OUTPUT
Modulation method Vector space modulation
Modulation frequency Maximum 15kHz
Output cable length USC 50m, SC 25m [1]

Dynamic brake Built-in. Optional dynamic braking

Degree of protection IP20
Operation temperature -10°C to +50°C
Storage temperature -20°C to +70°C
ENVIRONMENTAL Relative humidity <90%, non-condensing
CONDITIONS Altitude 1000m
Power altitude derating (> 1000m) (>1000m)-1% per 100m; maximum 3000m
Vibration 5,9m/sec2 (=0,6G)
Ventilation Air forced refrigeration
Motor thermal model Motor stall warning Low voltage
Phases current imbalance Over voltage Ground fault
Torque limit and torque limit time
PROTECTIONS Overload warning Dynamic brake resistor thermal model
(adjustable)
Short-circuit Mean torque 100% of braking during 5s. Communications fault
Overtemperature Stall motor protection Input/Output phase loss
Standard Hardware RS485 port
Standard Protocol Modbus-RTU
COMMUNICATION
Optional Hardware Profipower, Ethernet, N2 Metasys
Optional Protocols Profibus, Devicenet
Analogue inputs 1 input 0-10Vac ±10Vdc / 1 input 0-20mA or 4-20mA
Digital inputs 8 configurable inputs
INPUTS
/OUTPUTS Analogue outputs 1 output 0-10Vdc
1 Changeover programmable relay (250Vac, 1A; 30Vdc, 1A)
Relay output
1 Programmable open collector transistor output (26VDC, 100mA)
CONTROL Display Keypad and digital programming unit. Removable optional
REGULATIONS CE, cTick, UL[2], cUL[2]

NOTES [1] Other configurations, consult Power Electronics.

[2] On process.

WIRING CONTROL
10 Power Supply for Potentiometer

Current Signal Input 0-20mA

Voltage Signal Input0-10V
Multi-Func.OpenCollector
Output< 26VDC,100mA

Multi-Step Freq.-Middle

RS485 Communication
Factory Settings

Emergency Stop(BX)

Multi-Step Freq.-High

Multi-Func. Analogue
Multi-Step Freq.-Low
JogOperation (JOG)
ReverseRun (RX)
ForwardRun (FX)

TripReset (RST)

Output 0-10V
24V Output

Common
Common

Terminal

MF Input MF Input MF Input

Terminals Terminals Terminals
1-2 3-5 6-8

3A 3C 3B MO MG 24 P1 P2 CM P3 P4 P5 CM P6 P7 P8 VR V1 I AM S+ S-

Multi-Func.Relay
(< 250Vac, 1A;
30VDC,1A)

24VDC

80mA
max. Note: The MO output has been designed for
a maximum current of 80mA.

38-39
Topologies
Dimensions and Weights 05.

SD250 SERIES
TOPOLOGIES

P1(+)

Optional Optional
harmonics RFI Optional
filter filter dV/dt filter
L1 R U

L2 S V
W
L3 T
PE

N(-)

RECTIFIER DC BUS DYNAMIC INVERTER

BRAKE

Frames 5 and 6 can optionally integrate DC harmonic filters.

DIMENSIONS (mm) AND WEIGHTS (kg) 4.5

100
4.5

70 4.5
4.5 130
65.5 130 95.5

4 4.5

WEIGHT WEIGHT
FRAME FRAME
(kg) (kg)
128

128
120
119

1 0,76 2 1,12
4 4.5
65.5 95.5
4.5

180
170 170
4.5

4.5 155
5

220
210

WEIGHT WEIGHT
FRAME FRAME
120.5
128

(kg) (kg)

3 1,87 4 3,66
4.5 4.5 4.5 4.5
132 170
140

260
10

208.5
240

235
8

219 7 189.5
10
392
410
304
320

WEIGHT WEIGHT
FRAME FRAME
(kg) (kg)
5 9 6 13
7 7 10 10
219
240

LOW VOLTAGE / POWER ELECTRONICS

 Standard ratings
Accessories

CONFIGURATION TABLE

SD25 016 2

SD250 series Rated voltage Output current

SD25 2 200-230V 01 1,25A

3 380-480V ... ...

88 88A

[1] Verifiy the rated current of the motor nameplate to guarantee the compatibility with the selected drive.

STANDARD RATINGS

200Vac-230Vac (-15% a 10%) 380Vac-480Vac (-15% a 10%)

POWER POWER
FRAME CODE I(A) Rated FRAME CODE I(A) Rated
kW HP kW HP

SD25203 3 0.4 0.5 SD25301 1.25 0.4 0.5

1 1
SD25205 5 0.75 1 SD25302 2.5 0.75 1
2 SD25208 8 1.5 2 2 SD25304 4 1.5 2
SD25212 12 2.2 3 SD25306 6 2.2 3
3 3
SD25217 17 4 5.4 SD25309 9 4 5.4
SD25224 24 5.5 7.5 SD25312 12 5.5 7.5
4 4
SD25232 32 7.5 10 SD25316 16 7.5 10
SD25246 46 11 15 SD25324 24 11 15
5 5
SD25260 60 15 20 SD25330 30 15 20
SD25274 74 18.5 25 SD25339 39 18.5 25
6 6
SD25288 88 22 30 SD25345 45 22 30

ACCESSORIES

CODE ACCESSORIES DESCRIPTION

SD25TCD DeviceNet communication module

I001 Profibus
I002 Ethernet
SD25CF1 Display extender kit (5 meters)

RFI FILTERS

LEAKAGE CURRENT I(mA) DIMENSIONS (mm)

CURRENT VOLTAGE
CODE APPLICABLE DRIVES
I (A) (V)
Rated Maximum W D H

250 SD25203, SD25205

FESD25302 5 0.5 26 76.5 40 175 D W
400 SD25301, SD25302

FESD25208 12 0.5 26 250 107,5 40 176.5 SD25208 INPUT

FESD25304 6 0.5 26 400 107,5 40 176.5 SD25304

FESD25217 20 0.5 26 250 147,5 45 176.5 SD25212, SD25217

FESD25309 11 0.5 26 400 147,5 45 176.5 SD25306, SD25309 H

FESD25232 50 0.5 26 250 189,5 60 270 SD25224, SD25232

FESD25316 30 0.5 26 400 189,5 60 270 SD25312, SD25316

OUTPUT
FESD25260 65 3.2 34 480 255 65 418 SD25246, SD25260

FESD25330 35 3.2 34 480 255 65 418 SD25324, SD25330

FESD25288 90 3.2 34 480 280 65 506 SD25274, SD25288

FESD25345 45 3.2 34 480 280 65 506 SD25339, SD25345

40-41
 05.

SD250 SERIES
INPUT HARMONICS FILTER

DIMENSIONS (mm)
CURRENT VOLTAGE
CODE APPLICABLE DRIVES
I (A) (V)
W D H

FHSD4004 4 400 170 120 230 SD25301, SD25302, SD25304

FHSD4008 8 400 170 120 230 SD25306

FHSD4016 16 400 170 120 230 SD25309, SD25312, SD25316

FHSD4024 24 400 140 100 320 SD25324

FHSD4030 30 400 140 100 320 SD25330

FHSD4045 45 400 230 100 320 SD25339, SD25345

W D
H

OUTPUT dV/dt FILTERS

DIMENSIONS (mm)
CURRENT
MODEL CODE APPLICABLE DRIVES
I (A)
W D H

SD25203, SD25205, SD25208, SD25212

SD25217, SD25224, SD25232, SD25301

FSDVDT-030 30 150 81 135
SD25302, SD25304, SD25306, SD25309
1
SD25312, SD25316, SD25324, SD25330
(IP00)
FSDVDT-050 50 180 85 160 SD25246, SD25339, SD25345

FSDVDT-070 70 180 85 160 SD25260

FSDVDT-100 100 180 185 175 SD25274, SD25288

SD25203, SD25205, SD25208, SD25212

SD25217, SD25224, SD25232, SD25301

FSDVDT-030-23 30 240 210 265
SD25302, SD25304, SD25306, SD25309
2
SD25312, SD25316, SD25324, SD25330
(IP23)
FSDVDT-050-23 50 240 210 265 SD25246, SD25339, SD25345

FSDVDT-070-23 70 240 210 265 SD25260

FSDVDT-100-23 100 281 225 340 SD25274, SD25288

NOTE Consult Power Electronics in case of additional requirements.

W D D W

30
H

MODEL 1 MODEL 2
(IP00) (IP20)

LOW VOLTAGE / POWER ELECTRONICS