MVP®

Multi-Image Display & Monitoring System

The MVP® revolutionizes the multi-display marketplace with a highly flexible, intuitive and simple yet comprehensive approach to virtual wall monitor applications.
The possibility of displaying any input signal to any output monitor can now be realized without the need for DAs or upstream monitor routers.

The best image quality in

the industry

SCTE104 monitoring

Nielsen Rating Display

Remote SNMP Monitoring

& Thumbnailing
(VistaLINK® PRO)

IntelliGain Loudness
Monitoring

16 channels of
audio per input

Dynamic clock Display

High quality on-screen

graphics & text

DVI / VGA Over 120 images per

Analog display
SD-SDI
On-screen Mouse &
HD-SDI Keyboard Control
3Gb/s
ASI
IP
HDMI

Features & Benefits

• Highest quality video images - single pass processing • Consolidated - scaling, signal sniffing (fault monitoring), routing and fan-out of
• Hardware based - no PC on board, no hard-drive inputs
• RTOS - Real-Time Operating System • Supports many output display destinations
• Not a frame limited architecture - PLink™ interconnects and Ethernet control; • Eliminates the need for a preview/monitor router to support multiple inputs to
does not exhibit PCI bandwidth limitations multiple displays
• Expandable - frame not limited to a maximum number of inputs per system - • Show multiple copies of the same BNC input across displays
cumulative bandwidth • Monitor everything - View by Exception with VistaLINK® and display video
• True hot-swappable, front-access input, output modules and PSU inputs only when faults are detected through built-in signal monitoring
• Fast power cycle recovery (15 seconds) • On-screen time of day clocks (analog and digital with external LTC reference
• Redundancy options for mission critical operations and configurable offsets) and date display
• Fiber output option - single fiber (single or Multi-Mode) up to 10km support • Up & down timers
The Complete Solution Provider

• HD/SD serial output option • User-definable labels

• "Out of the box" implementation - set-up is quick and easy • Dynamic UMDs & tally from routers and switchers
• 9:16 output aspect ratio support (WARP™) • Safe area markers
• Flexible - usually 2-3 solutions from the same system with options for future • Graphics logos and background
growth
• User-friendly GUI - drag & drop control, fast preset recall and off-line
development; real time display layout control

Applications
• Broadcast Facility Master Control • Video Walls
• Satellite Uplink/Downlink • NOC Control Rooms
• Cable Head End & IPTV Head End • Surveillance Security Information Displays
• Production • Traffic & Transportation Applications
• OB Vans • Gaming & Entertainment

Signal Monitoring
Seeing is believing, but with so many video, audio and data details to look for, it's nice to know that user-configurable faults are detected and displayed by the
MVP® and can be further reported to and recorded by VistaLINK® PRO. Along with VistaLINK®, Evertz® provides the most comprehensive signal monitoring and
image display solution.

Status Monitoring & Fault Trigger Parameters • Audio too loud or too quiet
• Loss of video • Loss of closed captioning
• Active picture levels • Loss of closed cap waveform
• EDH errors • Loss of program rating
• Frozen or black video • Source ID missing
• Motion detection • VITC missing
• Video format detection • Macro block detection (hardware specific)
• Loss of audio channels • Loss of Nielsen data
• Mono audio detection • Loudness
• Phase reversal
 MVP®
Multi-Image Display & Monitoring System

Specifications
Auto-detecting Video Inputs: • OP47 Frame:
Analog Video: • Decode/Display Dolby® E Audio Data (OV-3G-8DEM) • 6RU, 15-module agnostic slots
• NTSC/PAL • SCTE104 monitoring • Rack mountable
• Subtitles • Front access
Digital Video: • Dual redundant PSU, hot-swappable
• SD-SDI (SMPTE ST 259-1) IP (MPEG-2, H.264):
• HD-SDI (SMPTE ST 292-1, 1.5Gb/s) • MPEG-2 TS UDP/RTP AUX Inputs & Outputs:
• 3Gb/s (SMPTE ST 424) • RTMP (Flash) • Up to 64 GPI inputs and 44 GPO outputs
• Built-in embedded audio extraction (up to 2 groups) • MMSH (multicast or unicast) • LTC for clock/timer reference
• HDMI (with HDCP) • HTTP • RS-232/422 serial interface
• MMST
HD Formats: • MPEG-2 TS over TCP Configuration Control:
• 1080i/60 • 1080i/59.94 • HLS (Apple) • Maestro™ graphic interface for design and control
• 1080i/50 • 1080p/60 • VNC • DCP desktop control panel via Ethernet
• 1080p/50 • 720p/60 • MAGNUM VUE
• 1080p/23.98sF • 1080p/24sF Multi-Input Format Display and Monitoring: • CP-2116E & CP-2232E
• 480p/59.94 • 720p/59.94 • Auto-sensing HD/SD/Analog video input on the same BNC
• 480p/60 • DVI/RGB Electrical:
• 525i/625i • Dual redundant power supplies with separate AC inlets
3G Formats: • 720p/50 • Auto-ranging voltage, 100-240V AC, 50/60Hz
• 1080p/60 • 1080p/59.94 • IP/ASI (MPEG-2, H.264) • Maximum power dissipation: 625W
• 1080p/50 • Typical power dissipation: 350W, 8A
Head-End Monitoring:
Output Resolutions Supported • Perfect solution for all head-end facilities, including IPTV, Genlock:
• XGA (1024x768) • WARP (768x1280) CABLE and SAT • Separate NTSC (SMPTE ST 170-1) and PAL (ITU624-4),
• SXGA (1280x1024) • 720p (1280x720) • Monitor everything, view by exception color black via BNC
• WARP 2 (768x1366) • SXGA+ (1400x1050) • Integrated signal monitoring
• 480p (720x480) • WXGA (1280x768) • 100% SNMP reporting and configuration Front Panel Indicators:
• UXGA (1600x1200) • 576p (720x576) • PSU status LED and local error/failure LED
• WXGA 2 (1366x768) • HD (1920x1080) Computer Graphic Video Inputs:
• WUXGA (1920x1200) • Two or four input module Tally Output (GROC):
• From 640x480 (VGA) to 1600x1200 (WUXGA) resolution • 4-pin terminal, relay N/O, N/C for status/fault alarm
Decode • DVI or 15-pin D-sub via adapter
• XDS Video Outputs:
• HD & SD VITC/Source ID Audio: • Single, dual and multiple output support for XGA up to HD
• WSS/AFD adjust/display • Balanced/unbalanced AES resolution
• Detect Encoded Audio (AC3/Dolby® E) • Balanced analog stereo • DVI-I connector, BNC and/or fiber interfaces
• EIA-608 - SD Captions • On-screen display of level and phase bars (model dependent)
• EIA-708 - HD Captions • Audio monitoring output, 2 groups (AES/EBU)
• WST - World Standard Teletext
• Source standard
• Decode/Display Dolby® E Metadata
• Monitor Dolby E Levels
• Nielsen Display (AMOL/NAES)

Ordering Information
Contact your Evertz Sales Representative for more information 3000BHP-AUX Breakout bulkhead panel for GPI/O, LTC input, and serial
communications
With the MVP® there are many different possible I/O combinations including dual, 7700PTX-MVP Protocol Translator: Connect multiple serial input devices to the
quad and octo-output display solutions along with redundancy to meet your multi- MVP®
signal monitoring & display needs. 3000MKT-AUX Rackmount panel for AUX breakout board
2430GDAC GLink™ to DVI converter
Accessories 2430GDAC-WARP GLink™ to DVI converter, with 90° display rotation support
3000MVP-HDMI8-AC3 3000DCP Allows you to change your display's presets from a selection of
HDMI with HDCP decryption and AC3 decoding monitoring possibilities
input solution for the MVP® System CP-2232E Advanced System Control Panel
3000MVP-GI Dual (2) or Quad (4) computer video inputs per input module 2430RX-2 Dual Path Serial Digital to DVI Converter
3000MVP-AI Monitor up to 4 analog pairs or 4 AES/EBU audio channels per VUE Customizable Graphical User Interface used to control broadcast
video input operations
3000BHP-U 1RU breakout bulkhead panel to support unbalanced AES/EBU
digital audio
3000BHP-BAL 2RU breakout bulkhead panel to support either balanced stereo
analog inputs or balanced AES/EBU audio