Scribd
Upload
50 views19 pages

Soil Compaction: Learning Objectives

The document discusses soil compaction, including its importance in improving soil characteristics like strength and permeability, how it can be achieved through static or dynamic loading, and factors that influence compaction like soil type and compaction effort. It also covers determining maximum dry density and optimum moisture content through standard and modified proctor tests in the lab and methods for measuring field compaction like the sand cone test.

Uploaded by

AhmedMahir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views19 pages

Soil Compaction: Learning Objectives

The document discusses soil compaction, including its importance in improving soil characteristics like strength and permeability, how it can be achieved through static or dynamic loading, and factors that influence compaction like soil type and compaction effort. It also covers determining maximum dry density and optimum moisture content through standard and modified proctor tests in the lab and methods for measuring field compaction like the sand cone test.

Uploaded by

AhmedMahir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

Soil Compaction

 Learning Objectives;

1- Understand the purpose and importance

of soil compaction.

2- Know the factors that will influence the


field compaction of soil

3-Ability to determine the optimum moisture


content and maximum dry density from a
standard or modified proctor test result.
 Compaction is the densification of the soil by the application of mechanical

energy.

 Compaction is the most common and important method of soil improvement.


 Why Compaction is important:
improve characteristics of soils by:
1- Increases Strength 2- Decreases permeability
3- Reduces settlement of foundation
4- Increases slope stability of embankments

 Soil Compaction can be achieved either by static or dynamic loading:


1- Smooth-wheel rollers
2- Sheepfoot rollers
3- Rubber-tired rollers
4- Vibratory Rollers
 General Principles:
 The degree of compaction of soil is measured by its unit weight, 𝜸𝒅 , and
optimum moisture content, 𝝎𝒄 .
 The process of soil compaction is simply expelling the air from the voids.
or reducing air voids
 Reducing the water from the voids means consolidation.

Mechanism of Soil Compaction


 By reducing the air voids, more soil can be added to the block. When moisture is
added to the block (water content, 𝝎𝒄 , is increasing) the soil particles will slip more on
each other causing more reduction in the total volume, which will result in adding more
soil and, hence, the dry density 𝜸𝒅 will increase, accordingly.
 Increasing 𝝎𝒄 will increase up to a certain limit (Optimum moister Content, OMC)
 after this limit, Increasing 𝝎𝒄 will decrease.
 Laboratory Compaction:
 Two Tests are usually performed in the laboratory to determine the maximum
dry unit weight and the OMC.
 1- Standard Proctor Test
 2- Modified Proctor

Test In both tests the compaction energy is:


Standard Proctor Test
 A standard volume (944 cc ) is filled up with soil in 3 layers
(fig.5.2).

 Each layer is compacted by 25 blows of a standard hammer of


weight 2.495 kg, falling through 304.8 mm.

 Calculate the dry unit weight of the compacted soil.

 The test is repeated at different water content.

 The dry unit weight vs. the water content is plotted to obtain
compaction curve.

 The peak point ----> maximum dry unit weight ( 𝛾 dmax) and
optimum water content (Wopt).
 Factors Affecting Compaction
1- Effect of Soil Type
2- Effect of Compaction Effort

Clayey soil
EX 1
 Determination of Field Unit Weight of Compaction

When the compaction work is progressing in the field,


knowing whether the specified unit weight has been
achieved is useful. The standard procedures for determining
the field unit weight of compaction include

1. Sand cone method


2. Rubber balloon method
3. Nuclear method
Sand cone method

1. The sand cone device consists of a glass or plastic jar


with a metal cone attached at its top.
2. The jar is filled with uniform dry Ottawa sand. The
combined weight of the
3. jar, the cone, and the sand filling the jar is determined
(𝑊1 ).
4. In the field, a small hole is excavated in the area where the
soil has been compacted
5- If the weight of the moist soil excavated from the hole (𝑊2 ) is determined and
the moisture content of the excavated soil is known, the dry weight of the soil
can be obtained as:
𝑾𝟐
𝑾𝟑 =
𝟏 + 𝝎𝒄
6- After excavation of the hole, the cone with the sand-filled jar attached to it is
inverted and placed over the hole. Sand is allowed to flow out of the jar to fill the
hole and the cone. After that, the combined weight of the jar, the cone, and the
remaining sand in the jar is determined (W4), so
𝑾𝟓 = 𝑾𝟏 − 𝑾𝟒
𝑾𝟓 weight of sand to fill the hole and cone
7- The volume of the excavated hole can then be determined as:

𝑾𝟓 − 𝑾𝒄𝒐𝒏𝒆
𝑽=
𝜸𝒅 (𝒔𝒂𝒏𝒅)
𝑾𝒄𝒐𝒏𝒆 weight of sand to fill the cone only

8- The dry unit weight of compaction made in the field then can be
determined as follows:
𝒅𝒓𝒚 𝒘𝒆𝒊𝒈𝒉𝒕 𝒐𝒇 𝒕𝒉𝒆 𝒆𝒙𝒄𝒂𝒗𝒂𝒕𝒆𝒅 𝒔𝒐𝒊𝒍 𝒐𝒇 𝒕𝒉𝒆 𝒉𝒐𝒍𝒆 𝑾𝟑
𝜸𝒅 (𝒔𝒐𝒊𝒍) = =
𝑽𝒐𝒍𝒖𝒎𝒆 𝒐𝒇 𝒕𝒉𝒆 𝒉𝒐𝒍𝒆 𝑽
EX 2

You might also like