PROFESSIONAL ENGINEER

Summary Statement
Paragraph in the
A brief summary of how you career episode(s)
Competency Element
have applied the element where the element is
addressed
PE1 KNOWLEDGE AND SKILL BASE
CE 1.6, CE 1.7, CE
PE1.1 Comprehensive, theory-
1.8, CE 1.9, CE 1.10,
based understanding of the
I implemented my academic CE 2.7, CE 2.8, CE
underpinning natural and
knowledge on electrical 2.9, CE 2.10, CE 2.11,
physical sciences and the
engineering to craft the project CE 2.12, CE 2.13, CE
engineering fundamentals
design 2.14, CE 3.5, CE 3.6,
applicable to the engineering
CE 3.7, CE 3.8, CE
discipline
3.10
PE1.2 Conceptual understanding CE 1.7, CE 1.8, CE
of the mathematics, numerical I performed numerous 1.9, CE 2.7, CE 2.8,
analysis, statistics and computer calculations, estimations, CE 2.9, CE 2.10, CE
and information sciences which tabulations etc. to support my 2.11, CE 2.14, CE 3.6,
underpin the engineering design CE 3.7, CE 3.8
discipline
PE1.3 In-depth understanding of I examined the results and CE 1.12, CE 3.5
specialist bodies of knowledge performed modifications in the
within the engineering discipline design by using software
I sought technical advice from my CE 2.5
PE1.4 Discernment of senior colleagues during design
knowledge development and review proposal. I improved my
research directions within the Engineering knowledge by
engineering discipline browsing the latest engineering
advancements on the internet
PE1.5 Knowledge of contextual I followed international standards CE 1.8, CE 1.13, CE
factors impacting the engineering to give strong technical 2.16, CE 3.5, CE 3.6,
discipline justification of my design CE 3.9
PE1.6 Understanding of the My design were composed of
scope, principles, norms, modern and latest technologies CE 1.6, CE 1.7, CE
accountabilities, and bounds of that were relevant to my filed. 1.8, CE 1.9, CE 1.10,
contemporary engineering CE 2.7, CE 2.8, CE
practice in the specific discipline 2.9, CE 2.10, CE 2.11,
CE 2.12, CE 2.13, CE
2.14, CE 3.5, CE 3.6,
CE 3.7, CE 3.8, CE
3.10
 CE 1.8, CE 1.13, CE
2.16, CE 3.5, CE 3.6,
CE 3.9
I obeyed multiple professional
standards

I followed the safety principles

CE 1.12, CE 1.13, CE
and rules so the project guaranteed
2.12, CE 2.16, CE
safety for everyone. 3.12
PE2 ENGINEERING APPLICATION ABILITY
I tackled many problems during CE 1.6, CE 1.8, CE
PE2.1 Application of established
this project. I brainstormed over it 1.10, CE 2.11, CE
engineering methods to complex
and suggested suitable suggestions 3.10
engineering problem solving
to rectify them
PE2.2 Fluent application of CE 1.12, CE 3.5
I used software to develop my
engineering techniques, tools,
design reports.
and resources

CE 1.6, CE 1.7, CE
1.8, CE 1.9, CE 1.10,
CE 2.7, CE 2.8, CE
2.9, CE 2.10, CE 2.11,
CE 2.12, CE 2.13, CE
I took care that my designs were in
PE2.3 Application of systematic 2.14, CE 3.5, CE 3.6,
relevance to preliminary
engineering synthesis and design CE 3.7, CE 3.8, CE
mechanical systems and
processes 3.10
methodologies

CE 1.12, CE 2.15, CE
My team stand by me at every
3.11
difficult situation. I managed to be
a good mentor for them
PE2.4 Application of systematic
approaches to the conduct and
management of engineering
I successfully reduced the cost of
projects CE 1.11, CE 2.7
the lift up by conducting
researches and by performing cost
analysis
PE3 PROFESSIONAL AND PERSONAL ATTRIBUTES

CE 1.8, CE 1.13, CE
2.16, CE 3.5, CE 3.6,
CE 3.9
I assured that the design was
implemented in accordance with
the international standards
PE3.1 Ethical conduct and
professional accountability
I performed risk assessment test to
CE 1.12, CE 1.13, CE
ensure the safety level in all the
2.12, CE 2.16, CE
design activities.
3.12

I attended a number of meetings CE 1.6, CE 2.15, CE

PE3.2 Effective oral and written
with my supervisor and team 3.5
communication in professional
members
and lay domains

PE3.3 Creative innovative and I took most of the knowledge from CE 2.6
proactive demeanor library and studied design manuals
I updated my supervisor with the CE 1.12, CE 3.11
PE3.4 Professional use and progress of the project by
management of information presenting a weekly progress
report.
I planned, designed, and build the CE 2.6
project methodology

PE3.5 Orderly management of

self, and professional conduct I acknowledged myself with the
study of machines. I also enrolled
in the additional courses

My team supported me in every

PE3.6 Effective team CE 1.12, CE 2.15, CE
situation and I always paid heed to
membership and team leadership 3.11
their advice.