Scribd
Upload
99 views1 page

Nastran Verification Manual-5

This document outlines various verification tests and examples for linear static, normal modes/eigenvalue, steady-state heat transfer, buckling, dynamics, and nonlinear static analyses using plate, solid, and beam elements. It includes over 50 separate examples involving structures like plates, cylinders, pipes, frames, and beams under different loads like pressure, gravity, forces, and vibrations. The examples are intended to validate the accuracy of the software's finite element analysis solutions against theoretical and benchmark results.

Uploaded by

Dan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views1 page

Nastran Verification Manual-5

This document outlines various verification tests and examples for linear static, normal modes/eigenvalue, steady-state heat transfer, buckling, dynamics, and nonlinear static analyses using plate, solid, and beam elements. It includes over 50 separate examples involving structures like plates, cylinders, pipes, frames, and beams under different loads like pressure, gravity, forces, and vibrations. The examples are intended to validate the accuracy of the software's finite element analysis solutions against theoretical and benchmark results.

Uploaded by

Dan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Verification Manual

6.2 Mechanical Structures – Linear Statics Analysis with Plate Elements........................................ 180
6.2.1 Plane Shear and Bending Load on a Plate ................................................................................ 180
6.2.2 Uniformly Distributed Load on a Circular Plate .......................................................................... 182
6.2.3 Torque Loading on a Square Tube ............................................................................................ 184
6.2.4 Cylindrical Shell with Internal Pressure ...................................................................................... 186
6.2.5 Gravity Loading on a Thin Wall Cylinder .................................................................................... 188
6.2.6 Pinched Cylindrical Shell ............................................................................................................ 190
6.2.7 Infinite Plate with a Circular Hole ............................................................................................... 192
6.3 Mechanical Structures – Linear Statics Analysis with Solid Elements ....................................... 194
6.3.1 Thick Plate Clamped at Edges ................................................................................................... 194
6.4 Mechanical Structures – Normal Modes/Eigenvalue Analysis ..................................................... 197
6.4.1 Cantilever Beam with a Variable Rectangular Section .............................................................. 197
6.4.2 Thin Circular Ring Clamped at Two Points ................................................................................ 199
6.4.3 Vibration Modes of a Thin Pipe Elbow ....................................................................................... 201
6.4.4 Thin Square Plate (Clamped or Free) ........................................................................................ 204
6.4.5 Simply – Supported Rectangular Plate ...................................................................................... 207
6.4.6 Bending of a Symmetric Truss ................................................................................................... 209
6.4.7 Hovgaard’s Problem – Pipes with Flexible Elbows .................................................................... 211
6.4.8 Rectangular Plates ..................................................................................................................... 213
6.5 Stationary Thermal Tests – Steady-State Heat Transfer Analysis ............................................... 215
6.5.1 L-Plate......................................................................................................................................... 215
7. Buckling Verification Using Theoretical Solutions ...................................................................... 217
7.1 Buckling of a Thin Walled Cylinder .................................................................................................. 218
7.2 Buckling of a Bar with Hinged Ends ................................................................................................ 220
7.3 Buckling of a Bar with Hinged Ends Using Plates ......................................................................... 222
7.4 Buckling of a Bar with Hinged Ends Using Solids ......................................................................... 224
7.5 Buckling of a Rectangular Plate Under Concentrated Center Loads ........................................... 226
7.6 Buckling of a Rectangular Plate Under End Uniform Load ........................................................... 228
8. Dynamics Verification Using Standard NAFEMS Benchmarks................................................... 230
8.1 Transient Forced Vibration Response – Deep Simply Supported Beam ..................................... 231
8.2 Periodic Forced Vibration Response – Deep Simply Supported Beam ....................................... 233
8.3 Modal Transient Forced Vibration Response – Simply Supported Plate .................................... 236
8.4 Harmonic Forced Vibration Response – Simply Supported Plate ............................................... 238
8.5 Random Forced Vibration Response – Simply Supported Plate .................................................. 240
8.6 Direct Transient Forced Vibration Response – Simply Supported Plate..................................... 242
8.7 Direct Frequency Response – Simply Supported Plate ................................................................ 245
9. Dynamics Verification Using Theoretical Solutions .................................................................... 248
9.1 Seismic Response of a Beam Structure .......................................................................................... 249
9.2 Cantilever Beam Subjected to Sine Plus Tip Load......................................................................... 251
9.3 Simply Supported Beam, Ramped Nodal Forcing Function, Transient Forced Vibration ......... 254
9.4 Tower Structure Under a Harmonic Excitation Force .................................................................... 256
9.5 Simply Supported Beam Subjected to a Traveling Dynamic Load .............................................. 259
10. Nonlinear Static Verification Using Theoretical Solutions ........................................................ 262
10.1 Nonlinear Cable Tension ................................................................................................................. 263
10.2 Cable Supporting Hanging Loads .................................................................................................. 265
10.3 Ten Story Plane Frame .................................................................................................................... 267
10.4 Straight Cantilever with Axial End Point Load ............................................................................. 269
10.5 Residual Stress Problem ................................................................................................................. 271
11. Nonlinear Static Verification Using Standard NAFEMS Benchmarks ...................................... 273

Autodesk Inventor Nastran 2022 v

You might also like