Scribd
Upload
1K views7 pages

IEEE 5 Bus System Data

The document describes how to perform a load flow analysis of the IEEE 5-bus system in Power World Simulator software. It includes the single line diagram and data for the 5 buses including voltage levels, generation, and load for each bus. It also includes the line data with impedance and charging values for the lines connecting the buses. It then shows the results of the load flow solution, giving the generation, load, and voltage values calculated for each bus.

Uploaded by

sengsouvanhphaysaly phaysaly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views7 pages

IEEE 5 Bus System Data

The document describes how to perform a load flow analysis of the IEEE 5-bus system in Power World Simulator software. It includes the single line diagram and data for the 5 buses including voltage levels, generation, and load for each bus. It also includes the line data with impedance and charging values for the lines connecting the buses. It then shows the results of the load flow solution, giving the generation, load, and voltage values calculated for each bus.

Uploaded by

sengsouvanhphaysaly phaysaly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

How To Perform Load Flow

Analysis of IEEE 5-Bus


System in Power World
Simulator Software
By: Dr. J. A. Laghari
 Single Line Diagram of IEEE 5-Bus System
 Bus Data for IEEE 5 Bus System
Bus No. Bus Type Voltage Generation Load
(P.U.) MW Mvar MW Mvar

1 Swing 1.06 + j 0.0 0 0 0 0


2 PV 1.00 + j 0.0 40 30 20 10
3 PQ 1.00 + j 0.0 0 0 45 15
4 PQ 1.00 + j 0.0 0 0 40 5
5 PQ 1.00 + j 0.0 0 0 60 10
 Line Data for IEEE 5 Bus System
Line Line Line Impedance Line Charging
From To R (p.u.) X (p.u.) Susceptance
½B
1 2 0.02 0.06 0+j0.03
1 3 0.08 0.24 0+j0.025
2 3 0.06 0.18 0+j0.02
2 4 0.06 0.18 0+j0.02
2 5 0.04 0.12 0+j0.015
3 4 0.01 0.03 0+j0.01
4 5 0.08 0.24 0+j0.025
 Load Flow Solution of IEEE 5 Bus System
Bus No. Generation Load Bus Voltage
MW Mvar MW Mvar Voltage(p.u.) Angle
1 129.59 -7.42 0 0 1.06 0
2 40 30 20 10 1.0474 -2.8063
3 0 0 45 15 1.0242 -4.997
4 0 0 40 5 1.0236 -5.3291
5 0 0 60 10 1.0179 -6.1503
129.585 MW
-7.421 Mvar

40.723 (1.192) 39.531 18.874 (0.036) 18.838 6.333 MW


88.864 MW 1.158 (-1.855) -3.014 -5.202 (-1.990) 3.212 -2.285Mvar
-8.579 Mvar
24.343 MW
(1.410 MW) -6.784 Mvar 27.495 MW
(0.352 MW) (0.441 MW) -5.928 Mvar (0.031 MW)
(-2.431 Mvar)
(-3.238Mvar) (-2.966 Mvar) (-5.118Mvar)
87.453 MW 24.694 MW
6.149 Mvar 3.546 Mvar 27.936 MW
2.962 Mvar 6.302 MW
-2.833 Mvar

54.823 MW (1.125) 53.698 MW


7.343 Mvar (0.176) -7.167 Mvar
40 MW
30 Mvar
THANK YOU VERY MUCH

You might also like