40G DP - (D) QPSK TXP 211650000-009 CID For Padtec Rev02 12102012

Rev.
02
JDSU Part Number: 21165000-009
40Gb/s DP-QPSK Transponder - Padtec
8500 Series
Key Features  300 pin MSA compliant

 Small form factor 5” x 7” x 0.63”
 OC-768, STM-256 and OTU3
 50 GHz ITU-T grid channel spacing.
 Coherent receiver
 10G Baud Rate
 Fast I2C Compatible
 55ns/nm CD tolerance
 100ps DGD tolerance
Applications The 8500 series 40Gb/s Long Reach Transponder (LR) is a 300Pin MSA module
and represents the next generation of 40Gb/s transponder products.
 Long haul transmission
 OC-768, STM-256 and OTU3 The 8500 uses the very latest DSP chip technology to mitigate transmission
impairments such as chromatic dispersion and polarization mode dispersion,
Compliance along with JDSU’s optical transmitter and coherent receiver technology to enable
a compact solution while supporting the latest features and protocols.
 ITU-T G.691 The 8500 incorporates advanced DSP technology and supports dual bit rates
 Telcordia GR-253 Issue 3 43.0Gb/s and 44.6Gb/s, which allows the transponder to operate in a wide variety
 Telcordia GR-468-CORE of networking application protocols including OC-768, STM-256 and OTU-3.
 IEC 60950-1:2005
 EN 60950-1:2006 +A1+A11 The module uses the NRZ (Non Return to Zero) DP-(D)QPSK modulation
 UL/CSA 60950-1:2007 format with coherent detection and is compliant with the industry standard 300-
 IEC 60825-1:2007 pin MSA. It supports operation over links with up to 55,000ps/nm of dispersion
 EN 60825-1:2007 and 100ps DGD.
 EN 60825-2:2004 +A1+A2
 RoHS 6/6 The 8500 transponder supports 40Gb/s line-side applications for DWDM
transmission systems, cross-connects, optical routers/switches and SONET/SDH
transmission systems.
IMPORTANT NOTICE: ALL SPECIFICATIONS, TECHNICAL DATA AND OTHER INFORMATION CONTAINED IN THIS DOCUMENT, AND ALL STATEMENTS ABOUT THE PRODUCT(S) IDENTIFIED
IN THIS DOCUMENT, ARE PRELIMINARY IN NATURE AND ARE PROVIDED “AS IS,” WITHOUT WARRANTY OR ASSURANCE OF ANY KIND. JDSU MAKES NO REPRESENTATION OR
WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCT(S) OR THEIR SPECIFICATIONS. ALL INFORMATION IS SUBJECT TO CHANGE. PLEASE CONTACT JDSU FOR MORE
INFORMATION. JDSU AND THE JDSU LOGO ARE TRADEMARKS OF JDS UNIPHASE CORPORATION. OTHER TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
COPYRIGHT JDS UNIPHASE CORPORATION. ALL RIGHTS RESERVED.
40Gb/s DP-QPSK Transponder
8500 Series 2
Functional Block Diagram
8500 Series 3
Absolute Maximum Ratings

Parameter Symbol Minimum Maximum
5 V supply voltage VCC -0.3 V 6.0 V
3.3 V supply voltage VDD -0.3 V 3.5 V
-5.2 V supply voltage VEE -5.5 V 0.3 V
LVCMOS/LVTTL input signals -0.5 V 3.9 V
Analog input signals -7.0 V 7.0V
Storage case temperature range Tstg -40°C 85°C
Relative humidity (non-condensing) RH - 85%
Minimum fiber-bend radius - 1 inch (25.4 mm)
Note: Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only.
Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data
sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.
Operation Condition
Operating Conditions
BOL definition 25oC Tcase and normal power supplies
EOL Definition Over temp, power supply range and aging
Parameters Units Min. Typical Max.
o
Operating Case Temperature C -5 70
Operating Relative Humidity (non-condensing) % 5 85
+5V Analog Voltage V 4.75 5 5.25
+5V Analog Current A - 2.0
3.3V Analog/Digital Voltage V 3.13 3.3 3.47
3.3V Analog/digital Current A - 10
-5.2 Analog/Digital V -5.46 -5.2 -4.94
-5.2V Analog Current A - 2.5
-5.2V Digital Current A - 2.5
Total Power Consumption - 4 Corner W 48 54
Note: supply current maximum rating includes inrush current.
8500 Series 4
Optical Specifications (Transmitter)

Parameter Units Minimum Typical Maximum
Wavelength Range THz 191.35 196.1

Wavelength Stability GHz -1.5 1.5
Channel Tuning Time s 30
Output Power (EOL) dBm 0 +3
LsOff Power dBm -40
Power Stability over temp or channels dB -1 1
OSNR dB/0.1 nm 40
SMSR dB 40
Average RIN dB/Hz -139
TX Warm-Up Time s 40 60
Modulation Scheme NRZ-(D)QPSK
Data Rate Gb/s 43.0184 44.57
Baud Rate Gb/s 10.7546 11.1425
Chirp -0.2 0 0.2
Polarization Bit Offset UI 0.5
Output Polarization Orthogonality deg 87 93
Jitter Generation ITU-T G.8251
ORL dB 27
8500 Series 5
Optical Specifications (Receiver & Path)
Parameter Units Minimum Typical Maximum
Wavelength Range nm 1528.77 1566.72

Overload (EOL) 1 channel dBm 0
Sensitivity 44.6G (EOL) dBm -20
OSNR (1E-3) without FEC dB/0.1 nm 13.3
Penalty 40 ns/nm CD @ 1E-3 BER dB 1.1
Penalty 55 ns/nm CD @ 1E-3 BER dB 1.3
Penalty 100ps DGD @ 1E-3 BER dB 1.0
OSNR Penalty, PDL = 2 dB dB 1
Local Oscillator Laser Channel Tuning Time sec 30
RX Synch time (electrical power up) sec 60
RX Synch time (wavelength change) sec 30
RX Synch time (unknown CD, channel fixed) sec 2
ORL dB 27
G.8251(05/2008) for 44.5G with HF limit changed to
Jitter Tolerance
0.18UI, and LF limited to 8KHz.
Note: All characteristics are over life, over wavelength range, and over temperature range unless otherwise specified.
8500 Series 6
Electrical Specifications
Parameter Symbol Units Minimum Typical Maximum
1.2V CML (support both AC or DC coupling).
Differential Data/Clock Signals
No DC blocking caps in Transponder.
Differential Impedance RD Ohm 75 125
Output Common Mode Voltage VCM V 0.72 1.23
Diff. Output High Voltage VOH V VCM+0.25 VCM+0.5
Diff. Output Low Voltage VOL V VCM-0.5 VCM-0.25
Termination Voltage Vtt V 1.1 1.3
Input Common Mode Voltage VRCM V 0.7 Vtt
Input High Voltage VIH V VRCM+0.0875 VRCM+0.5
Input Low Voltage VIL V VRCM-0.5 VRCM-0.0875
RxDATA & RxDSC Rate Fedata Mbps 2689 2786
RxDCK Rate (Fedata / 4) MHz 672.16 696.4
TxDATA & TxDSC Rate Fedata Mbps 2689 2786
TxDCK Rate (Fedata / 4) MHz 672.16 696.4
TxCKSRC Rate (Fedata / 4) MHz 672.16 696.4
Reference Clocks (Inputs) AC coupled LVPECL
TxREFCLK Frequency (Fedata / 4) MHz 672.16 696.4
TxREFCLK Amplitude mVpp(SE) 450 1100
TxREFCLK Duty Cycle % 45 55
RxREFCLK Frequency (Fedata / 4) MHz 672.16 696.4
RxREFCLK Amplitude mVpp(SE) 450 1100
RxREFCLK Duty Cycle % 45 55
8500 Series 7

Analog Signals
50 Ohm Single Ended Output.
TxMONCK signal type
Default OFF (during power up & normal operation).
Only generates (Fedata) rate:
TxMONCK Frequency MHz
2689 (Fedata) 2786
TxMONCK Output Amplitude mVpp(SE) 200 450
50 Ohm Single Ended Output.
RxMONCK signal type
Default OFF (during power up and normal operation).
Only generates (Fedata/4) rate:
RxMONCK Frequency MHz
672.16 696.4
RxMONCK Output Amplitude mVpp(SE) 200 450
IPD_FEEDBACK signal type Analog
IPD_FEEDBACK Output slope V/mW 0.8 1.26
Digital Control/Alarm Signals
LVCMOS Output High VOH mV 2400 3300
LVCMOS Output Low VOL mV 400
LVCMOS Input High VIH mV 2000 3950
LVCMOS Input Low VIL mV -300 800
8500 Series 8

HW Alarms (Outputs) 3.3V LVCMOS
Active Low Output signal which indicates that there is no incoming optical signal.
LOS Definition
The optical input power alarm threshold and hysteresis is user settable.
LOS Activation level, default dBm -24
LOS Deactivation level, default dBm -23.5
LOS Hysteresis, default dB 0.5
LOS Activation ms 1
LOS Deact time ms 10
Active High Output signal which indicates that RxDCK & RxDATA are not derived
RxS Definition
from the optical receive signal.
RxS Activation time ms 1
RxS Deactivation time ms 10
Active Low Output signal which the user can configure to monitor any of a list of
CFG_ALM Definition
alarms. Defaults to monitoring RxPOWALM.
Configurable for:
CFG_ALM Configuration RxS,LOS, RxLOCKERR, LsBIASALM, LsTEMPALM, TxLOCKERR,
TxFIFOERR, TxOOA, , EOL & PSUMMARY.
For –LOS, RxS,
TxOOA 1
CFG_ALM activation time ms
For all others - 10
CFG_ALM Deactivation time ms 10

Active Low Output signal which is an electrical “or” of the status register,
Stat_Int Definition
representing the overall alarm status summary for the entire module
Stat_Int Activation Time ms 10
Stat_Int Deactivation Time ms 10
Module Interface
The transponder interface is compatible with the 300-Pin Transponder MSA I2C™ interface.
8500 Series 9
Electrical Pin Assignment
PIN
K J H G F E D C B A
#
1 GND RxDSCP GND RxDATA12P GND RxDATA8P GND RxDATA4P GND RxDATA0P
2 GND RxDSCN GND RxDATA12N GND RxDATA8N GND RxDATA4N GND RxDATA0N
3 NUC GND N5V2D GND FFU GND VAPSD GND P3V3D GND
4 GND RxDCKP GND RxDATA13P GND RxDATA9P GND RxDATA5P GND RxDATA1P
5 GND RxDCKN GND RxDATA13N GND RxDATA9N GND RxDATA5N GND RxDATA1N
6 LOS GND N5V2D GND I2C_ADDR0 GND VAPSD GND P3V3D GND
7 GND RxREFCKP GND RxDATA14P GND RxDATA10P GND RxDATA6P GND RxDATA2P
8 GND RxREFCKN GND RxDATA14N GND RxDATA10N GND RxDATA6N GND RxDATA2N
9 NUC GND N5V2D GND I2C_ADDR1 GND VAPSD GND P3V3D GND
10 I2CDATA FFU GND RxDATA15P GND RxDATA11P GND RxDATA7P GND RxDATA3P
11 GND RxMONCK GND RxDATA15N GND RxDATA11N GND RxDATA7N GND RxDATA3N
12 I2CCLK GND RxS GND I2C_ADDR2 GND VAPSD GND P3V3D GND
FEC-
13 NUC NUC NUC NUC NUC APS_Sense NUC NUC FFU
IN_DATA
14 AGND N5V2A AGND N5V2A AGND P3V3A AGND P3V3A AGND P5V0A
17 FEC-IN_CLK NUC NUC NUC NUC NUC APS_Set NUC NUC FFU
18 GND TxMONCK FFU FFU GND FFU FFU FFU FFU FFU
19 LsENABLE GND NV52D GND CFG_ALM GND VAPSD GND P3V3D GND
20 GND TxDSCP GND TxDATA12P GND TxDATA8P GND TxDATA4P GND TxDATA0P
21 GND TxDSCN GND TxDATA12N GND TxDATA8N GND TxDATA4N GND TxDATA0N
TxLINETIMS
22 STAT_INT GND NV52D GND GND VAPSD GND P3V3D GND
EL
23 GND TxDCKP GND TxDATA13P GND TxDATA9P GND TxDATA5P GND TxDATA1P
24 GND TxDCKN GND TxDATA13N GND TxDATA9N GND TxDATA5N GND TxDATA1N
25 REG_RESET GND NV52D GND VAPSD GND VAPSD GND P3V3D GND
26 GND TxCKSRCP GND TxDATA14P GND TxDATA10P GND TxDATA6P GND TxDATA2P
27 GND TxCKSRCN GND TxDATA14N GND TxDATA10N GND TxDATA6N GND TxDATA2N
28 MOD_RESET GND NV52D GND VAPSD GND VAPSD GND P3V3D GND
29 GND TxREFCKP GND TxDATA15P GND TxDATA11P GND TxDATA7P GND TxDATA3P
30 GND TxREFCKN GND TxDATA15N GND TxDATA11N GND TxDATA7N GND TxDATA3N
8500 Series 10
- Receiver GND & Power - Transmitter GND & Power

NUC - No User Connection
supply supply
- 2.5Gb/s differential Rx
SIGNAL SIGNAL - 2.5Gb/s differential Tx signals (pin reserved for manufacturer)
signals
- 622MHz differential Rx - No Internal
SIGNAL SIGNAL - 622MHz differential Tx signals FFU
signals Connection
- Common Alarm / Control - Common GND & Power - Non-standard Optional Function
SIGNAL SIGNAL
(including Serial Bus) supply (Factory Configurable)
Note: VAPSD is not used by the transponder and there is no internal connection for these pins.
Optical Connectors
Tx and Rx port will be supplied with LC/APC connectors.
8500 Series 11
Mechanical Dimensions
Specifications in mm unless otherwise noted.
Tx
Rx
8500 Series 12
List of Dimensions (mm)
8500 Series 13
Handling
Because the complete universal transponder module is not hermetically sealed, do not immerse it or spray it with cleaning
solutions or solvents. The fiber connector handling/protection (dust) cap and the fiber pigtail materials can deform at
temperatures above +85°C.
Reliability
The transponder module is designed to operate within specification with a target FIT rate < 1800 after 20 years, assuming
an ambient temperature of 30°C.
Compliance
Environmental
Storage temperature: The transponder module is capable of storage in a -40°C to +85°C environment, without any
performance or reliability deficiencies when used.
ESD
The electrical input pins shall be protected against ESD to withstand minimum 500 V with appropriate human body model.
Laser Safety
The 8500 series transponders are classified as Class 1 per IEC 60825-1:2007 and EN 60825-1:2007 and are considered
non-hazardous when operated within the limits of this specification.
Caution
Operating this product in a manner inconsistent with intended usage and specifications may result in
hazardous radiation exposure.
Use of controls or adjustments or performance of procedures other than these specified in this product
datasheet may result in hazardous radiation exposure.
Tampering with this laser product or operating this product outside the limits of this specification may
be considered an ‘act of manufacturing’ and may require recertification of the modified product.
This device complies with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.
8500 Series 14
Ordering Information
For more information on this or other products, please contact your local JDSU account manager or JDSU directly at 1-
800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected].
Product Code: 21165000-009, 40Gb/s DP-(D)QPSK Transponder for Padtec
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate.
However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks
and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the
design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU
makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information.
JDSU and the JDSU logo are trademarks of JDSU Corporation. Other trademarks are the property of their respective holders. ©2006 JDSU Corporation.
All rights reserved. 30137440 Rev. 001 06/06 7100TT.DS.CMS.AE

40G DP - (D) QPSK TXP 211650000-009 CID For Padtec Rev02 12102012

Uploaded by

Copyright:

Available Formats

40G DP - (D) QPSK TXP 211650000-009 CID For Padtec Rev02 12102012

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

40G DP - (D) QPSK TXP 211650000-009 CID For Padtec Rev02 12102012

Uploaded by

Copyright:

Available Formats

Rev.

Key Features  300 pin MSA compliant

Functional Block Diagram

Absolute Maximum Ratings

Optical Specifications (Transmitter)

Wavelength Range THz 191.35 196.1

Optical Specifications (Receiver & Path)

Parameter Units Minimum Typical Maximum

Wavelength Range nm 1528.77 1566.72

Parameter Symbol Units Minimum Typical Maximum

Parameter Symbol Units Minimum Typical Maximum

CFG_ALM Deactivation time ms 10

Electrical Pin Assignment

- Receiver GND & Power - Transmitter GND & Power

Tx and Rx port will be supplied with LC/APC connectors.

List of Dimensions (mm)

Product Code: 21165000-009, 40Gb/s DP-(D)QPSK Transponder for Padtec

Telcordia is a registered trademark of Telcordia Technologies Incorporated.

You might also like