W550el 6 71 W5400 D02

w
w
w
.c
h
in
a
fi
x
.c
o
m
W550EL
w
w
w
.c
h
in
a
fi
x
.c
o
m
Preface
m
o
Notebook Computer
.c
W550EL
x
Service Manual
fi
Preface
a
in
h
.c
w
w
w
I
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information contained
m
herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven-
dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are
they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
o
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or
.c
reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica-
tion, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of
x
their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement
fi
of that product or its manufacturer.
Preface
Version 1.0
a
October 2013
in
Trademarks
h
Intel, and Intel Core are trademarks of Intel Corporation.
Windows® is a registered trademark of Microsoft Corporation.
.c
Other brand and product names are trademarks and /or registered trademarks of their respective companies.
w
w
w
II
Preface
About this Manual

This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and
inspection of personal computers.
m
It is organized to allow you to look up basic information for servicing and/or upgrading components of the W550EL se-
o
ries notebook PC.
The following information is included:
.c
Chapter 1, Introduction, provides general information about the location of system elements and their specifications.
Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade
x
elements of the system.
fi
Appendix A, Part Lists
Preface
Appendix B, Schematic Diagrams
Appendix C, Updating the FLASH ROM BIOS
a
in
h
.c
w
w
w
III
Preface
IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to per-
sons when using any electrical equipment:
m
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
o
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of elec-
trical shock from lightning.
.c
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal instructions.
x
5. This product is intended to be supplied by a Listed Power Unit with an AC Input of 100 - 240V, 50 - 60Hz, DC Output
of 19V, 3.42A (65 Watts) minimum AC/DC Adapter.
fi
Preface
CAUTION
a
in
This Computer’s Optical Device is a Laser Class 1 Product
FCC Statement
h
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
.c
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
w
w
w
IV
Preface
Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
m
1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
Do not expose the computer Do not place it on an unstable Do not place anything heavy
o
to any shock or vibration. surface. on the computer.
.c
x
2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This
is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.
fi
Do not expose it to excessive Do not leave it in a place Don’t use or store the com- Do not place the computer on
Preface
heat or direct sunlight. where foreign matter or mois- puter in a humid environment. any surface which will block
ture may affect the system. the vents.
a
in
3.
h
Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save
your work. Remember to periodically save your data as data may be lost if the battery is depleted.
.c
Do not turn off the power Do not turn off any peripheral Do not disassemble the com- Perform routine maintenance
until you properly shut down devices when the computer is puter by yourself. on your computer.
all programs. on.
w
w
w
V
Preface
4. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong mag-
netic fields. These can hinder proper performance and damage your data.
5. Take care when using peripheral devices.
m
Use only approved brands of Unplug the power cord before
peripherals. attaching peripheral devices.
o
.c
x
fi
Power Safety
Preface
The computer has specific power requirements:
a
• Only use a power adapter approved for use with this computer.
• Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are
 unsure of your local power specifications, consult your service representative or local power company.
in
Power Safety • The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do
Warning not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.
Before you undertake • When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.
any upgrade proce-
dures, make sure that
you have turned off the
•
• h
Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
Before cleaning the computer, make sure it is disconnected from any external power supplies.
.c
power, and discon-
nected all peripherals Do not plug in the power Do not use the power cord if Do not place heavy objects
and cables (including cord if you are wet. it is broken. on the power cord.
telephone lines and
power cord). It is advis-
w
able to also remove

your battery in order to
prevent accidentally
w
turning the machine

on.
w
VI
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the
m
computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.
• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service
o
personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode
.c
or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
x
Battery Guidelines
fi
The following can also apply to any backup batteries you may have.
Preface
• If you do not use the battery for an extended period, then remove the battery from the computer for storage.
a
• Before removing the battery for storage charge it to 60% - 70%.
• Check stored batteries at least every 3 months and charge them to 60% - 70%.
in

Battery Disposal
h
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under var-
ious state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
.c
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Discard used battery according to the manufacturer’s instructions.
w
Battery Level
w
Click the battery icon in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10%
will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.
w
VII
Preface
Related Documents
You may also need to consult the following manual for additional information:
m
User’s Manual on CD/DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro-
o
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
.c
System Startup
1. Remove all packing materials. 130
2. Place the computer on a stable surface.
x
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the computer
fi
(e.g. keyboard and mouse) to their ports.
Preface
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and connect
a
the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle (do
not exceed 130 degrees); use the other hand (as illustrated in Figure
in
1) to support the base of the computer (Note: Never lift the computer
Figure 1 
by the lid/LCD). Opening the Lid/LCD/ Shut Down
7. Press the power button to turn the computer “on”. Computer with AC/DC
h Adapter Plugged-In Note that you should al-

ways shut your com-
puter down by
.c
choosing Shut Down
from the Start Menu.
This will help prevent
hard disk or system
w
problems.
w
w
VIII
Preface
Contents
Introduction ..............................................1-1 COMBO ......................................................................................... A-5
m
DVD DUAL ................................................................................... A-6
Overview .........................................................................................1-1 Dummy ODD ................................................................................. A-7
Specifications ..................................................................................1-2 LCD ............................................................................................... A-8
o
External Locator - Top View with LCD Panel Open ......................1-4
External Locator - Front & Right Side Views .................................1-5 Schematic Diagrams................................. B-1
.c
External Locator - Left Side & Rear View .....................................1-6 System Block Diagram ...................................................................B-2
External Locator - Bottom View .....................................................1-7 Processor 1/7-DMI, FDI, PEG ........................................................B-3
Mainboard Overview - Top (Key Parts) .........................................1-8 Processor 2/7- CLK, MISC .............................................................B-4
Mainboard Overview - Bottom (Key Parts) ....................................1-9 Processor 3/7- (DDR3) ...................................................................B-5
x
Mainboard Overview - Top (Connectors) .....................................1-10 Processor 4/7- Power ......................................................................B-6
Mainboard Overview - Bottom (Connectors) ...............................1-11 Processor 5/7- GFX PWR ...............................................................B-7
fi
Disassembly ...............................................2-1 Processor 6/7- GND ........................................................................B-8
Preface
Processor 7/7- RSVD ......................................................................B-9
Overview .........................................................................................2-1
a
DDR3 SO-DIMM_0 .....................................................................B-10
Maintenance Tools ..........................................................................2-2 DDR3 SO-DIMM_1 .....................................................................B-11
Connections .....................................................................................2-2
PANEL, INVERTER, CRT ..........................................................B-12
in
Maintenance Precautions .................................................................2-3
PCH 1/9- RTC, HDA, SATA .......................................................B-13
Disassembly Steps ...........................................................................2-4 PCH 2/9- PCIE, SMBUS, CLK ....................................................B-14
Removing the Battery ......................................................................2-5
PCH 3/9- DMI, FDI, PWRGD .....................................................B-15
Removing the Optical (CD/DVD) Device ......................................2-8 h
Removing the Hard Disk Drive .......................................................2-6
PCH 4/9- LVDS, DDI, CRT .........................................................B-16
PCH 5/9- PCI, USB, RSVD .........................................................B-17
.c
Removing the System Memory (RAM) ........................................2-10
PCH 6/9- GPIO, CPU ...................................................................B-18
Removing and Installing a Processor ............................................2-12
PCH 7/9- PWR .............................................................................B-19
Removing the Wireless LAN Module and Keyboard ...................2-15
PCH 8/9 POWER .........................................................................B-20
Removing the 3.75G Module ........................................................2-18
w
PCH 9/9- GND .............................................................................B-21

Removing the CCD .......................................................................2-19 WLAN, 3G, MSATA ...................................................................B-22
Part Lists ..................................................A-1 CCD, TPM, FAN, CLICK ............................................................B-23
w
Part List Illustration Location ........................................................ A-2 USB3.0, LID SWITCH .................................................................B-24
Top ................................................................................................. A-3 Card Reader (RTL8411) ...............................................................B-25
w
Bottom ............................................................................................ A-4 SATA ODD, LED, USB CHARGE .............................................B-26
IX
Preface
HDMI, RJ45 ................................................................................. B-27

AUDIO CODEC VT1802P .......................................................... B-28
KBC-ITE IT8518E ....................................................................... B-29
m
5VS, 3VS, 1.5VS CPU ................................................................. B-30
VDD3, VDD5 ............................................................................... B-31
Power 0.85VS, 1.8VS .................................................................. B-32
o
POWER 1.5V/1.05VS .................................................................. B-33
POWER VCORE1 ....................................................................... B-34
.c
POWER VCORE2 ....................................................................... B-35
AC IN, CHARGER ...................................................................... B-36
AUDIO BOARD .......................................................................... B-37
x
AUDIO BOARD (W550EU1) ..................................................... B-38
LID SW BOARD (W550EU1) ................................................... B-39
fi
POWER SW BOARD .................................................................. B-40
Preface
EXTERNAL ODD BOARD ........................................................ B-41

Power Diagram ............................................................................. B-42
a
Power On SEQ ............................................................................. B-43
Updating the FLASH ROM BIOS......... C-1
in
Download the BIOS ....................................................................... C-1
Unzip the downloaded files to a bootable CD/DVD/ or
USB Flash drive ............................................................................. C-1
h
Set the computer to boot from the external drive ........................... C-1
Use the flash tools to update the BIOS .......................................... C-2
.c
Restart the computer (booting from the HDD) .............................. C-2
w
w
w
X
Introduction
Chapter 1: Introduction
m
Overview
This manual covers the information you need to service or upgrade the W550EL series notebook computer. Information
o
about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about dri-
vers (e.g. VGA & audio) is also found in the User’s Manual. The manual is shipped with the computer.
.c
Operating systems (e.g. Windows 8, etc.) have their own manuals as do application softwares (e.g. word processing and
database programs). If you have questions about those programs, you should consult those manuals.
x
The W550EL series notebook is designed to be upgradeable. See Disassembly on page 2 - 1 for a detailed description of
1.Introduction
the upgrade procedures for each specific component. Please take note of the warning and safety information indicated
fi
by the “” symbol.
a
The balance of this chapter reviews the computer’s technical specifications and features.
in
h
.c
w
w
w
Overview 1 - 1
Introduction
Specifications Processor Options Security
Intel® Pentium® Processor® Security (Kensington® Type) Lock Slot
m
2030M (2.50GHz), 2020M (2.40GHz) BIOS Password
 2MB L3 Cache, 22nm, DDR3-1600MHz, TDP 35W

B980 (2.40GHz), B970 (2.30GHz), B960 (2.20GHz)
Audio
Latest Specification Information
o
2MB L3 Cache, 32nm, DDR3-1333MHz, TDP 35W High Definition Audio Compliant Interface
The specifications listed here are correct at the Intel® Celeron® Processor® 2 * Built-In Speakers
time of sending them to the press. Certain items 1020M (2.10GHz), 1000M (1.80GHz) Built-In Microphone
.c
(particularly processor types/speeds) may be
2MB L3 Cache, 22nm, DDR3-1600MHz, TDP 35W
changed, delayed or updated due to the manu- Storage
facturer's release schedule. Check with your B840 (1.9GHz), B830 (1.80GHz), B820 (1.70GHz)
service center for more details. 2MB L3 Cache, 32nm, DDR3-1333MHz, TDP 35 (Factory Option) One Changeable 12.7mm(h) Optical
Device Type Drive (Super Multi Drive Module or Blu-Ray
x
Core Logic Combo Drive Module)
1.Introduction
Intel® HM70 Chipset One Changeable 2.5" 9.5mm (h) SATA HDD
fi
(Factory Option) Dummy ODD
BIOS (Factory Option) One mSATA Solid State Drive (SSD)
 64Mb SPI Flash ROM Pointing Device
a
CPU AMI BIOS
The CPU is not a user serviceable part. Ac- Built-in Touchpad
cessing the CPU in any way may violate your Memory
in
warranty. Keyboard
Two 204 Pin SO-DIMM Sockets Supporting DDR3 1333/
1600MHz Memory Full-size “WinKey” keyboard (with numeric keypad)
Memory Expandable up to 16GB
Interface
h
(The real memory operating frequency depends on the
FSB of the processor.) One HDMI-Out Port
One Headphone-Out Jack
.c
LCD One Microphone-In Jack
15.6" (39.62cm) HD/FHD One RJ-45 LAN Jack
One External Monitor Port
Video Adapter Two USB 3.0 Ports
w
Intel HD Graphics One DC-in Jack

Dynamic Frequency (Intel Dynamic Video Memory Tech- Two USB 2.0 Ports
w
nology for up to 1.7GB)

Microsoft DirectX®11 Compatible
w
1 - 2 Specifications
Introduction
Mini Card Slots Environmental Spec
Slot 1 for WLAN Module or Combo WLAN and Bluetooth Temperature
m
Module Operating: 5°C - 35°C
(Factory Option) Slot 2 for 3G Module OR mSATA SSD Non-Operating: -20°C - 60°C
Relative Humidity
Card Reader
o
Operating: 20% - 80%
Embedded Multi-In-1 Card Reader Non-Operating: 10% - 90%
MMC (MultiMedia Card) / RS MMC
.c
SD (Secure Digital) / Mini SD / SDHC/ SDXC
Dimensions & Weight
MS (Memory Stick) / MS Pro / MS Duo 374mm (w) * 252mm (d) * 14 - 25.4mm (h) (Height Exclud-
ing Battery Area)
Communication
2.2 kg (with 48.84WH Battery and ODD)
x
Built-In Gigabit Ethernet LAN
1.Introduction
1M HD PC Camera Module
fi
(Factory Option) 3G Mini-Card Module
WLAN/ Bluetooth Half Mini-Card Modules:
(Factory Option) Intel® Centrino® Wireless-N 2230 Wire-
a
less LAN (802.11b/g/n) + Bluetooth 4.0
(Factory Option) Intel® Centrino® Wireless-N 135 Wire-
in
less LAN (802.11b/g/n) + Bluetooth 4.0
(Factory Option) Third-Party Wireless LAN (802.11b/g/n)
(Factory Option) Third-Party Wireless LAN (802.11b/g/n)
+ Bluetooth 4.0
Power
6 Cell Smart Lithium-Ion Battery Pack, 48.84WH

h
.c
(Factory Option) 6 Cell Smart Lithium-Ion Battery Pack,
62.16WH
Full Range AC/DC Adapter
AC Input: 100 - 240V, 50 - 60Hz
w
DC Output: 19V, 3.42A (65W)

w
w
Specifications 1 - 3
Introduction
Figure 1
External Locator - Top View with LCD Panel Open
Top View
m
1. PC Camera 1 2
(Optional)
o
2. Built-In
Microphone
.c
3. LCD
4. Power Button 3
5. Keyboard
x
6. Touchpad &
1.Introduction
Buttons
fi
a
in
4
h 5
.c
w
6
w
w
1 - 4 External Locator - Top View with LCD Panel Open

Introduction
External Locator - Front & Right Side Views Figure 2

Front View
m
1. LED Power
Indicator
FRONT VIEW 2. Multi-in-1 Card
o
Reader
1
.c
2
1.Introduction
fi
a
Figure 3
in
Right Side View
1. Microphone-In
RIGHT SIDE VIEW Jack
h 2. Headphone-Out
Jack
.c
3. USB 2.0 Ports
1 2 3 3 4 6 4. Optical Device
5 Drive Bay
5. Emergency Eject
w
Hole
6. Security Lock
w
Slot
w
External Locator - Front & Right Side Views 1 - 5

Introduction
External Locator - Left Side & Rear View

Figure 4
Left Side View
m
1. DC-In Jack
2. RJ-45 LAN Jack /
o
3. External Monitor LEFT SIDE VIEW
Port
4. Vent
.c
5. HDMI-Out Port
6. USB 3.0 Ports
3 4 5 6 6
1 2
x
1.Introduction
fi
a
in
Figure 5
Rear View
h REAR VIEW
.c
1. Battery
1
w
w
w
1 - 6 External Locator - Left Side & Rear View

Introduction
External Locator - Bottom View
m
Figure 6
Bottom View
1. Battery
o
2. Component Bay
Cover
.c
3. Vent
1 4. Hard Disk Bay
Cover
x
5. Speakers
1.Introduction
fi
a
in
2
3
h 
.c
4 Overheating
3
3 To prevent your com-
w
puter from overhea-

ting, make sure no-
5 5 thing blocks any vent
while the computer is
w
in use.
w
External Locator - Bottom View 1 - 7

Introduction
Figure 7 Mainboard Overview - Top (Key Parts)

Mainboard Top
Key Parts
m
1. KBC-ITE IT8518
o
.c
x
1.Introduction
fi
3
2
a
in
h 1
.c
w
w
w
1 - 8 Mainboard Overview - Top (Key Parts)

Introduction
Mainboard Overview - Bottom (Key Parts) Figure 8

Mainboard Bottom
m
Key Parts
1. Mini-Card
o
Connector (3G
Module)
1
2. CPU Socket (no
.c
CPU installed)
3. Memory Slots
DDR3 SO-DIMM
x
4. Mini-Card
Connector (WLAN
1.Introduction
2
fi
Module)
5. Audio Codec VIA
1802P
a
6. CMOS Battery
7. Platform Controller
3 Hub
in
8. LAN + Card
Reader IC
RTL8411
h
.c
7
6
w
8
4 5
w
w
Mainboard Overview - Bottom (Key Parts) 1 - 9

Introduction
Figure 9 Mainboard Overview - Top (Connectors)

Mainboard Top
m
Connectors
11 10
1. HDMI-Out Port 8 6
7
o
2. USB Port 3.0 9
3. Speaker Cable
Connector
.c
4. Microphone
Cable Connector
5. USB Port 2.0
x
Connector
1.Introduction
fi
a
in
1
h
.c
5
2
4
w
3
2
w
w
1 - 10 Mainboard Overview - Top (Connectors)

Introduction
Mainboard Overview - Bottom (Connectors) Figure 10

Mainboard Bottom
Connectors
m
10
12
1. ODD Connector
11 9 2. HDD Connector
o
3. Power Button
Cable Connector
.c
4. Keyboard Cable
8 Connector
5. TouchPad Cable
Connector
x
6. Fan Cable
1.Introduction
Connector
fi
3 7. Multi-in-1 Card
Reader
8. External Monitor
a
Port
1
9. RJ-45 LAN Jack
in
10. DC-In Jack
11. LCD Cable
6
Connector
h 12. CCD Cable

Connector
.c
2
5
4
w
7
w
w
Mainboard Overview - Bottom (Connectors) 1 - 11

1.Introduction
1 - 12
Introduction
w
w
w
.c
h
in
a
fi
x
.c
o
m
Disassembly
Chapter 2: Disassembly
m
Overview
o
This chapter provides step-by-step instructions for disassembling the W550EL series notebook’s parts and subsystems.
When it comes to reassembly, reverse the procedures (unless otherwise indicated).
.c
We suggest you completely review any procedure before you take the computer apart.
x
Procedures such as upgrading/replacing the RAM, optical device and hard disk are included in the User’s Manual but are
repeated here for your convenience.
2.Disassembly
fi
To make the disassembly process easier each section may have a box in the page margin. Information contained under
the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a  
a
lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the dis-
Information
assembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previ-
in
ous disassembly procedure. The amount of screws you should be left with will be listed here also.
A box with a  will also provide any possible helpful information. A box with a  contains warnings.
h
An example of these types of boxes are shown in the sidebar.

.c
Warning
w
w
w
Overview 2 - 1
Disassembly
NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the
battery is removed too).
m
Maintenance Tools
The following tools are recommended when working on the notebook PC:
o
• M3 Philips-head screwdriver
• M2.5 Philips-head screwdriver (magnetized)
.c
• M2 Philips-head screwdriver
• Small flat-head screwdriver
• Pair of needle-nose pliers
• Anti-static wrist-strap
x
2.Disassembly
Connections
fi
Connections within the computer are one of four types:
a
Locking collar sockets for ribbon connectors To release these connectors, use a small flat-head screwdriver to
gently pry the locking collar away from its base. When replac-
ing the connection, make sure the connector is oriented in the
in
same way. The pin1 side is usually not indicated.
Pressure sockets for multi-wire connectors To release this connector type, grasp it at its head and gently
rock it from side to side as you pull it out. Do not pull on the
h wires themselves. When replacing the connection, do not try to
force it. The socket only fits one way.
.c
Pressure sockets for ribbon connectors To release these connectors, use a small pair of needle-nose pli-
ers to gently lift the connector away from its socket. When re-
placing the connection, make sure the connector is oriented in
w
the same way. The pin1 side is usually not indicated.

Board-to-board or multi-pin sockets To separate the boards, gently rock them from side to side as
w
you pull them apart. If the connection is very tight, use a small
flat-head screwdriver - use just enough force to start.
w
2 - 2 Overview
Disassembly
Maintenance Precautions
The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re- 
moval and/or replacement job, take the following precautions:
m
Power Safety
Warning
1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other
Before you undertake
o
components could be damaged. any upgrade proce-
2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight. dures, make sure that
3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong mag- you have turned off the
.c
netic fields. These can hinder proper performance and damage components and/or data. You should also monitor power, and discon-
the position of magnetized tools (i.e. screwdrivers). nected all peripherals
and cables (including
4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly telephone lines and
x
damaged. power cord). It is advis-
5. Be careful with power. Avoid accidental shocks, discharges or explosions. able to also remove
2.Disassembly
•Before removing or servicing any part from the computer, turn the computer off and detach any power supplies. your battery in order to
fi
•When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire. prevent accidentally
6. Peripherals – Turn off and detach any peripherals. turning the machine
7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. on.
a
Before handling any part in the computer, discharge any static electricity inside the computer. When handling a
printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that
in
you use an anti-static wrist strap instead.
8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands pro-
duce oils which can attract corrosive elements.
9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted
to charged surfaces, reducing performance. h
10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as
.c
screws, loose inside the computer.
Cleaning
w
Do not apply cleaner directly to the computer, use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
w
w
Overview 2 - 3
Disassembly
Disassembly Steps
The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM
m
THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Battery: To remove the 3.75G Module:
o
1. Remove the battery page 2 - 5 1. Remove the battery page 2 - 5
2. Remove the 3.75G module page 2 - 18
.c
To remove the HDD:
1. Remove the battery page 2 - 5 To remove the CCD Module:
2. Remove the HDD page 2 - 6 1. Remove the battery page 2 - 5
x
2. Remove the CCD module page 2 - 19
To remove the Optical Device:
2.Disassembly
fi
1. Remove the battery page 2 - 5
2. Remove the Optical device page 2 - 8
a
To remove the System Memory:
in
2. Remove the system memory page 2 - 10
To remove and install a Processor:
2. Remove the processor
3. Install the processor
h page 2 - 12
page 2 - 14
.c
To remove the Wireless LAN Module
& Keyboard:
w

2. Remove the WLAN & keyboard page 2 - 15
w
w
2 - 4 Disassembly Steps
Disassembly
Removing the Battery Figure 1

1. Turn the computer off, and turn it over. Battery Removal
m
2. Slide the latch 1 in the direction of the arrow (Figure 1a).
a. Slide the latch and hold it
3. Slide the latch 2 in the direction of the arrow, and hold it in place (Figure 1a). in place.
4. Slide the battery 63 in the direction of the arrow 4 (Figure 1b). b. Slide the battery in the di-
o
rection of the arrow.
.c
a. b.
3
2
1
2.Disassembly
fi
4
a
in
h
.c

w
3. Battery
w
w
Removing the Battery 2 - 5

Disassembly
Removing the Hard Disk Drive

Figure 2 The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
m
HDD Assembly (h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Removal Chapter 4 of the User’s Manual) when setting up a new hard disk.
o
a. Locate the HDD bay cover Hard Disk Upgrade Process
and remove the screws.
1. Turn off the computer, and remove the battery (page 2 - 5).
.c
2. Locate the hard disk bay cover and remove screws 1 & 2 (Figure 2a).
x

2.Disassembly
a.
fi
HDD System Warning
New HDD’s are blank. Before you
a
begin make sure:
You have backed up any data
in
you want to keep from your old
HDD.
You have all the CD-ROMs and

FDDs required to install your op-
h erating system and programs.
If you have access to the internet,

.c
download the latest application
1 2 and hardware driver updates for
 the operating system you plan to
install. Copy these to a remov-
w
able medium.
• 2 Screws
w
w
2 - 6 Removing the Hard Disk Drive

Disassembly
3. Lift the hard disk bay cover from point 3 (Figure 3b).
4. Remove the hard disk bay cover 64 (Figure 3b). Figure 3
5. Grip the tab and slide the hard disk assembly in the direction of arrow 5 (Figure 3c). HDD Assembly
m
Removal (cont’d.)
6. Lift the hard disk assembly 6 out of the bay 7 (Figure 3d).
7. Remove the screws 8 - 9 and the adhesive cover 10 from the hard disk 11 (Figure 3e).
b. Remove the HDD bay
8. Reverse the process to install a new hard disk (do not forget to replace all the screws and bay cover).
o
cover.
c. Grip the tab and slide the
b. d. HDD assembly in the di-
.c
rection of the arrow.
d. Lift the HDD assembly
out of the bay.
e. Remove the screws and
7
x
adhesive cover.
3
2.Disassembly
fi
a
in
6
4
c. e.
h 9
.c
8 
5 4. HDD Bay Cover
w
10 6. HDD Assembly
10. Adhesive Cover
11. HDD
w
11
• 2 Screws
w
Removing the Hard Disk Drive 2 - 7

Disassembly
Figure 4 Removing the Optical (CD/DVD) Device

Optical Device
1. Turn off the computer, and remove the battery (page 2 - 5).
Removal
m
2. Locate the component bay cover and remove screws 1 - 4 (Figure 4a).
a. Remove the screws. 3. Remove the component bay cover 5 (Figure 4b).
b. Remove the component
a.
o
bay cover.
.c
2
x
3
2.Disassembly
fi
a
4
in
b.
h
.c
 5
5. Component Bay Cov-
w
er
w
• 4 Screws
w
2 - 8 Removing the Optical (CD/DVD) Device

Disassembly
4. Remove the screw at point 6 (Figure 5c). Figure 5

5. Use a screwdriver to carefully push out the optical device 8 at point 7 (Figure 5d). Optical Device
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The Removal (cont’d.)
m
screw holes should line up).
7. Replace the component bay cover and screws. c. Remove the screw at
8. Restart the computer to allow it to automatically detect the new device. point 6 .
o
d. Use a screwdriver to
carefully push out the
optical device at point
.c
c. d. 7 .
2.Disassembly
8
fi
a
6
in
7 7
h
.c

w
8. Optical Device
w
• 1 Screw
w
Removing the Optical (CD/DVD) Device 2 - 9

Disassembly
Figure 6 Removing the System Memory (RAM)

RAM Module
Removal
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
m
DDRIII (DDR3) Up to 1066/1333 MHz. The main memory can be expanded up to 8GB. The SO-DIMM modules sup-
a. Remove the screws ported are 1024MB and 2048MB DDRIII Modules. The total memory size is automatically detected by the POST rou-
from the component tine once you turn on your computer.
o
bay cover.
b. Remove the compo- Memory Upgrade Process
.c
nent bay cover. The 1. Turn off the computer, turn it over, and remove the battery (page 2 - 5).
RAM modules will be 2. Remove screws 1 - 4 from the component bay cover (Figure 6a).
visible at point 6 on
the mainboard.
3. Carefully lift up the bay cover 5 .
4. The RAM modules will be visible at point 6 on the mainboard (Figure 6b).
x
2.Disassembly
fi
a. b.

Contact Warning 1
2
a
Be careful not to touch
the metal pins on the
in
module’s connecting 3
edge. Even the cleanest 5
hands have oils which
can attract particles, and
4 6
degrade the module’s
performance. h
.c

w
5. Component Bay Cov-

er
w
• 4 Screws
w
2 - 10 Removing the System Memory (RAM)

Disassembly
5. Gently pull the two release latches ( 7 & 8 ) on the sides of the memory socket in the direction indicated by the Figure 7
arrows (Figure 7c). The RAM module 9 will pop-up (Figure 7d), and you can then remove it. RAM Module
6. Pull the latches to release the second module if necessary. Removal (cont’d)
m
7. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
8. The module will only fit one way as defined by its pin alignment. Make sure the module is seated as far into the slot c. Pull the release lat-
as it will go. DO NOT FORCE IT; it should fit without much pressure. ches.
o
9. Press the module in and down towards the mainboard until the slot levers click into place to secure the module. d. Remove the module.
10. Replace the component bay cover and the screws (see page 2 - 10).
.c
11. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
c. d.
x

2.Disassembly
Contact Warning
fi
Be careful not to touch
the metal pins on the
7 8 9
a
module’s connecting
edge. Even the clean-
est hands have oils
in
which can attract parti-
cles, and degrade the
module’s performance.

Single Memory Module Installation
h
.c
If your computer has a single memory mod-
ule, then insert the module into the Channel
0 (JDIMM1) socket. In this case this is the

w
lower memory socket (the socket closest to

the mainboard). 9. RAM Module
w
w
Removing the System Memory (RAM) 2 - 11

Disassembly
Figure 8 Removing and Installing a Processor

Processor Removal
Processor Removal Procedure
m
a. Locate the CPU heat 1. Turn off the computer, turn it over, remove the battery (page 2 - 5) and the component bay cover (page 2 - 8).
sink. 2. The CPU heat sink will be visible at point A (Figure 8a).
b. Disconnect the cable 3. Carefully disconnect the fan cable B ,and then remove the screws C - E (Figure 8b).
o
and remove the screws.
4. Lift the fan 6F out of the bay (Figure 8c).
c. Remove the fan.
d. Remove the screws. 5. Loosen the CPU heat sink screws in the order 3 , 2 & 1 (the reverse order as indicated on the label Figure 8d.
.c
a. c.
x
F
2.Disassembly
fi
a
in
d.
b.
h 1
.c
C
2
3

w
F. Fan
B
D E
w
• 6 Screws
w
2 - 12 Removing and Installing a Processor

Disassembly
6. Carefully (it may be hot) remove the heat sink unit 6G off the computer (Figure 9e). Figure 9
7. Turn the release latch H towards the unlock symbol to release the CPU (Figure 9f). Processor Removal
8. Carefully (it may be hot) lift the CPU I up and out of the socket (Figure 9g). (cont’d)
m
9. Reverse the process to install a new CPU.
10. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!) e. Carefully remove the
heat sink unit.
o
f. Turn the release latch to
e. g. unlock the CPU.
g. Lift the CPU out of the
.c
G socket.
I
2.Disassembly
fi
a
in
f.
h 
Caution
.c
The heat sink, and CPU area in
H H general, contains parts which are
subject to high temperatures. Allow 
the area time to cool before remov- G. Heat Sink
w
ing these parts. I. CPU

w
w
Removing and Installing a Processor 2 - 13

Disassembly
Figure 10 Processor Installation Procedure

Processor 1. Insert the CPU A (Figure 10a), and pay careful attention to the pin alignment; it will fit only one way (DO NOT
Installation FORCE IT!), and turn the release latch B towards the lock symbol (Figure 10b).
m
2. Remove the sticker C (Figure 10c) from the heat sink unit.
a. Insert the CPU. 3. Insert the heat sink D as indicated in Figure 10c.
b. Turn the release latch to- 4. Tighten the CPU heat sink screws in the order 1 , 2 & 3 (the order as indicated on the label and Figure 10d).
o
wards the lock symbol.
5. Replace the CPU fan, component bay cover and tighten the screws (page 2 - 12).
c. Insert the heat sink.
d. Tighten the screws.
.c
a. c.
D
A
x
2.Disassembly
fi
a
in
b. d.
1 D
h
.c
2
3

B
w
A. CPU
D. Heat Sink
w
• 3 Screws Note:
Tighten the screws in the order as
w
indicated on the label.
2 - 14 Removing and Installing a Processor

Disassembly
Removing the Wireless LAN Module and Keyboard Figure 11

1. Turn off the computer, turn it over, remove the battery (page 2 - 5) and the component bay cover (page 2 - 8). Wireless LAN
m
2. The Wireless LAN module will be visible at point 1 on the mainboard and keyboard ribbon cable under the Wire- Module and
less LAN module (Figure 11a). Keyboard Removal
3. Carefully disconnect the cable 2 , and then remove the screw 3 (Figure 11b)
o
4. The Wireless LAN module 4 (Figure 11c) will pop-up, and you can remove it from the computer and the keyboard a. Locate the WLAN.
b. Disconnect the cable
ribbon cable will be visible at point 5 .
and remove the screw.
.c
5. Careful not to bend the keyboard ribbon cable 6 . Disconnect the keyboard ribbon cable from the locking collar c. The WLAN module will
socket 7 (Figure 11d). pop up.
d. Disconnect the keyboard
a. c. ribbon cable from the
x
locking collar socket.
2.Disassembly
5
fi
Note: Make sure you
reconnect the antenna
4
cable to the “1 + 2”
a
socket (Figure 11b).
in
1 4
b.
d. h 
.c
7 Touchpad Cable
3 2 The touchpad cable is underneath
6 the keyboard cable. When disassem- 
w
bling the mainboard, the touchpad ca-

ble must be disconnected. 4.Wireless LAN Module
7
w
• 1 Screw
w
Removing the Wireless LAN Module and Keyboard 2 - 15

Disassembly
Figure 12 6. Disconnect cables 8 - 9 (Figure 12e).

Keyboard Removal 7. Remove screws 10 - 25 from the bottom case.
8. Turn the computer over, carefully pry the top case 26 off the bottom case at points A - C (Figure 12g).
m
e. Disconnect the cables.
9. Separate the top case 26 up and off the bottom case (Figure 12h)
f. Remove the screws.
g. Pry the top case off the e. g.
o
bottom case.
h. Separate the top and
8 C
bottom case.
.c
26 A
x
2.Disassembly
9
B
fi
a
in
f.
12 16
10 15 17 h.
11 13
14 18
 h 26
.c
26.Top Case 19
24 25
• 16 Screws 20
w
23 22 21
w
w
2 - 16 Removing the Wireless LAN Module and Keyboard

Disassembly
10. Remove screws 27 - 32 from the top case. Figure 13

11. Remove screws 33 - 41 from the keyboard shielding plate (Note: when removing special screws 33 - 41 , you’ll Keyboard Removal
need to use an (#0 head) electric screwdriver - set to a low spin of 300r.p.m. and low torque at 0.1~1.5kgf.cm. The (cont’d)
m
Lock torque should be set to 0.35~0.45kgf.cm, and should not be exceeded or it may cause screw damage).
12. Carefully lift the keyboard shielding plate 42 . i. Remove the screws.
13. Carefully separate the keyboard 43 from the top case (Figure 13k). j. Lift the keyboard shield-
o
ing plate.
i. j. k. Separate the keyboard
.c
from the top case.
28
27
33 34 35 36
x
29
41 42
2.Disassembly
30
fi
37 38 39 40
32
31
k.
a
in
43
h
.c

42.Keyboard Shielding
Plate
w
43.Keyboard
• 15 Screws
w
w
Removing the Wireless LAN Module and Keyboard 2 - 17

Disassembly
Figure 14 Removing the 3.75G Module

3G Module Removal
1. Turn off the computer, turn it over, remove the battery (page 2 - 12) and the component bay cover (page 2 - 10).
m
2. The 3.75G module will be visible at point 1 on the mainboard (Figure 14a).
a. Locate the 3.75G mod-
ule.
3. Carefully remove the screw 2 (Figure 14b).
b. Remove the screw. 4. The 3.75G module 3 (Figure 14c) will pop-up, and you can remove it from the computer (Figure 14d).
o
c. The module will pop-up.
d. Remove the 3.75G mod-
ule.
.c
a. c. d.
x
1
3 3
2.Disassembly
fi
a.
a
in
b.
h 
Power Button Cable
.c
 The power button cable is underneath the 3G
module. When disassembling the mainboard,
3. 3.75G Module the power button cable must be disconnect-
w
ed.
2
• 1 Screw
w
w
2 - 18 Removing the 3.75G Module

Disassembly
Removing the CCD Figure 15

CCD Removal
1. Turn off the computer, turn it over, and remove the battery (page 2 - 12).
m
2. Carefully remove the rubber screw covers 1 - 4 and screws 5 - 8 from the front cover (Figure 15a).
a. Carefully remove the
3. Run your fingers around the inner frame of the LCD panel at the points as indicated by the arrows 9 - 12 . rubber screw covers and
4. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Push the LCD front screws from the front
o
cover 13 upwards before carefully lifting it up. cover.
5. Remove the LCD front cover 13 (Figure 15c). k. Run your fingers around
the inner frame of the
.c
LCD panel at the points
a. 1 2 c. indicated by the arrows.
l. Lay the computer down
5 6 on a flat surface with the
x
top case up forming a 90
2.Disassembly
degree angle. Push the
fi
LCD front panel upwards
before carefully lifting it
up.
d. Remove the LCD front
a
13 cover.
4 3
in
8 7
b. d.
11 h
.c
10 12

w
13 13. LCD Front Cover

w
9 • 4 Screws
w
Removing the CCD 2 - 19

Disassembly
Figure 16 6. Disconnect the cable 14 .

CCD Removal 7. Remove the CCD module 15 (Figure 16f).
(cont’d) 8. Reverse the process to install a new CCD module.
m
e. Disconnect the cable. e.
f. Remove the CCD mod-
o
ule.
14
.c
x
f.
15
2.Disassembly
fi
a
in
 h
15. CCD Module
.c
w
w
w
2 - 20 Removing the CCD

Appendix A:Part Lists
m
This appendix breaks down the W550EL series notebook’s construction into a series of illustrations. The component part
numbers are indicated in the tables opposite the drawings.
o
Note: This section indicates the manufacturer’s part numbers. Your organization may use a different system, so be sure
to cross-check any relevant documentation.
.c
Note: Some assemblies may have parts in common (especially screws). However, the part lists DO NOT indicate the
total number of duplicated parts used.
x
Note: Be sure to check any update notices. The parts shown in these illustrations are appropriate for the system at the
A.Part Lists
fi
time of publication. Over the product life, some parts may be improved or re-configured, resulting in new part numbers.
a
in
h
.c
w
w
w
A - 1
Part List Illustration Location
The following table indicates where to find the appropriate part list illustration.
m
Table A - 1
Part List Illustration
Part
Location
o
Top page A - 3
.c
Bottom page A - 4
COMBO page A - 5
x
DVD Dual Drive page A - 6
Dummy ODD page A - 7
A.Part Lists
fi
LCD page A - 8
a
in
h
.c
w
w
w
A - 2
Top
m
o
.c
x
Figure A - 1
A.Part Lists
fi
Top
a
in
h
.c
w
w
w
Top A - 3
Bottom
m
o
.c
x
Figure A - 2
A.Part Lists
Bottom
fi
a
in
h
.c
w
w
w
A - 4 Bottom
COMBO
m
o
.c
x
Figure A - 3
COMBO
A.Part Lists
fi
a
in
h
.c
w
w
w
COMBO A - 5
DVD DUAL
m
o
.c
x
Figure A - 4
A.Part Lists
DVD DUAL
fi
a
in
h
.c
w
w
w
A - 6 DVD DUAL
Dummy ODD
m
o
.c
x
Figure A - 5
Dummy ODD
A.Part Lists
fi
a
in
h
.c
w
w
w
Dummy ODD A - 7
LCD
m
o
.c
x
Figure A - 6
A.Part Lists
LCD
fi
a
in
頭厚
h
.c
w
w
w
A - 8 LCD
Schematic Diagrams
Appendix B: Schematic Diagrams
m
This appendix has circuit diagrams of the W550EL notebook’s PCB’s. The following table indicates where to find the
appropriate schematic diagram.
o
Diagram - Page Diagram - Page Diagram - Page
Table B - 1
.c
System Block Diagram - Page B - 2 PCH 4/9- LVDS, DDI, CRT - Page B - 16 5VS, 3VS, 1.5VS CPU - Page B - 30 SCHEMATIC
Processor 1/7-DMI, FDI, PEG - Page B - 3 PCH 5/9- PCI, USB, RSVD - Page B - 17 VDD3, VDD5 - Page B - 31 DIAGRAMS
Processor 2/7- CLK, MISC - Page B - 4 PCH 6/9- GPIO, CPU - Page B - 18 Power 0.85VS, 1.8VS - Page B - 32
B.Schematic Diagrams
x
Processor 3/7- (DDR3) - Page B - 5 PCH 7/9- PWR - Page B - 19 POWER 1.5V/1.05VS - Page B - 33
Processor 4/7- Power - Page B - 6 PCH 8/9 POWER - Page B - 20 POWER VCORE1 - Page B - 34
fi
Processor 5/7- GFX PWR - Page B - 7 PCH 9/9- GND - Page B - 21 POWER VCORE2 - Page B - 35
Processor 6/7- GND - Page B - 8 WLAN, 3G, MSATA - Page B - 22 AC IN, CHARGER - Page B - 36

a
Processor 7/7- RSVD - Page B - 9 CCD, TPM, FAN, CLICK - Page B - 23 AUDIO BOARD - Page B - 37
DDR3 SO-DIMM_0 - Page B - 10 USB3.0, LID SWITCH - Page B - 24 AUDIO BOARD (W550EU1) - Page B - 38 Version Note
in
DDR3 SO-DIMM_1 - Page B - 11 Card Reader (RTL8411) - Page B - 25 LID SW BOARD (W550EU1) - Page B - 39 The schematic dia-
grams in this chapter
PANEL, INVERTER, CRT - Page B - 12 SATA ODD, LED, USB CHARGE - Page B - 26 POWER SW BOARD - Page B - 40
are based upon ver-
PCH 1/9- RTC, HDA, SATA - Page B - 13 HDMI, RJ45 - Page B - 27 EXTERNAL ODD BOARD - Page B - 41 sion 6-7P-W5406-001.
PCH 2/9- PCIE, SMBUS, CLK - Page B - 14 h
AUDIO CODEC VT1802P - Page B - 28 Power Diagram - Page B - 42
If your mainboard (or
other boards) are a lat-
er version, please
.c
PCH 3/9- DMI, FDI, PWRGD - Page B - 15 KBC-ITE IT8518E - Page B - 29 Power On SEQ - Page B - 43
check with the Service
Center for updated di-
agrams (if required).
w
w
w
B - 1
Schematic Diagrams
System Block Diagram
m
VDD3,VDD5 W540EU / W550EU
5V,3V,5VS,3VS,1.5VS, Chief River System Block Diagram W540EU MAIN BOARD
o
1.8VS,+1.5S_CPU
AUDIO BOARD
PHONE JACK x2, USB x1
1.8V, 0.85VS
Ivy Bridge
.c
1333/1666 MHz AUDIO BOARD
1.5V,0.75VS(VTT_MEM) PROCESSOR DDR3 / 1.5V PHONE JACK x2, USB x2
1.05VS DDRIII (W550EU)
rPGA989/988 SO-DIMM2
VCORE,VGFX_CORE SYSTEM SMBUS LID SWITCH BOARD
0.1"~13 DDRIII (W550EU)

FDI DMI*4 SO-DIMM1 POWER SWITCH BOARD
x
0.5"~5.5" <=8"
AUDIO BOARD
LCD CONNECTOR <8" EXTERNAL ODD BOARD
CRT CONNECTOR <15" INT SPKER-R (W550EU)
fi
MIC HP
Sheet 1 of 42 IN OUT
System Block HDMI Connector PantherPoint

(INT SPK R)
SENTELIC Controller
Diagram TOUCH PAD
Hub (PCH)
a
EC/BIOS SPI
TPM 1.2
Optional
SHEET 22 INT SPKER-L
32.768 KHz Azalia Codec
25x25mm
EC LPC VIA
in
ITE 8518E 33 MHz 989 Ball FCBGA VT1802P
128pins LQFP
0.5"~11" INT MIC
14*14*1.6mm
24 MHz AZALIA LINK

INT. K/B EC SMBUS
THERMAL
SENSOR
SMART
FAN
h
SMART
BATTERY
AC-IN 32.768KHz
PCIE
Mini PCIE
SOCKET
100 MHz
Mini PCIE
SOCKET
<12"
Mini PCIE
SOCKET
25 MHz
RTL8411
.c
M-SATA 3G MSATA CARD WLAN CARD
SATA I/II 3.0Gb/s <12" LAN READER
(USB2/SATA4) (USB3)
(Optional)
USB 2.0/3.0
7IN1
RJ-45
w
SATA HDD SATA ODD SOCKET

USB PORT1 USB PORT2 USB PORT3 USB PORT4 CCD
(USB0) (USB1) (USB9) (USB10) (USB8)
USB3.0 USB3.0 USB2.0 USB2.0
Charge
w
AUDIO BOARD AUDIO BOARD

(W550EU)
w
B - 2 System Block Diagram

Schematic Diagrams
Processor 1/7-DMI, FDI, PEG
m
Ivy Bridge Processor 1/7 ( DMI,PEG,FDI )
o
1.05VS
U13A
J22 20 mil PEG_IRCOMP_R R47 24.9_1%_04
PEG_ICOMPI J21
B27 PEG_ICOMPO H 22
14 DMI_TXN0 B25 DMI_RX#[0] PEG_RCOMPO
14 DMI_TXN1 DMI_RX#[1]
.c
A25
14 DMI_TXN2 B24 DMI_RX#[2] K33
14 DMI_TXN3 DMI_RX#[3] PEG_RX#[0] M35
B28 PEG_RX#[1] L34
14 DMI_TXP0 B26 DMI_RX[0] PEG_RX#[2] J35
14 DMI_TXP1 A24 DMI_RX[1] PEG_RX#[3] J32
DMI
14 DMI_TXP2 B23 DMI_RX[2] PEG_RX#[4] H 34
14 DMI_TXP3 DMI_RX[3] PEG_RX#[5] H 31
G21 PEG_RX#[6] G33
14 DMI_RXN0 E22 DMI_TX#[0] PEG_RX#[7] G30
14 DMI_RXN1 F21 DMI_TX#[1] PEG_RX#[8] F35
14 DMI_RXN2 D 21 DMI_TX#[2] PEG_RX#[9] E34
14 DMI_RXN3 DMI_TX#[3] PEG_RX#[10] E32
G22 PEG_RX#[11] D 33
x
14 DMI_RXP0 D 22 DMI_TX[0] PEG_RX#[12] D 31
14 DMI_RXP1 F20 DMI_TX[1] PEG_RX#[13] B33
PEG Compensation Signal
14 DMI_RXP2 DMI_TX[2]
PCI EXPRESS* - GRAPHICS

C 21 PEG_RX#[14] C 32
14 DMI_RXP3 DMI_TX[3] PEG_RX#[15]
J33
CAD NOTE: PEG_ICOMPI and RCOMPO signals
PEG_RX[0] L35 should be shorted and routed with
PEG_RX[1] K34
A21 PEG_RX[2] H 35 - max length = 500 mils
fi
14 FD I_TXN 0 H 19 FD I0_TX#[0] PEG_RX[3] H 32
14 FD I_TXN 1 FD I0_TX#[1] PEG_RX[4]
- typical impedance = 43 mohms
E19 G34
14 FD I_TXN 2 F18 FD I0_TX#[2] PEG_RX[5] G31 PEG_ICOMPO signals should be routed with
Intel(R) FDI
14 FD I_TXN 3 B21 FD I0_TX#[3] PEG_RX[6] F33
14 FD I_TXN 4 C 20 FD I1_TX#[0] PEG_RX[7] F30
- max length = 500 mils
Sheet 2 of 42
14 FD I_TXN 5 D 18 FD I1_TX#[1] PEG_RX[8] E35 - typical impedance = 14.5 mohms
14 FD I_TXN 6 E17 FD I1_TX#[2] PEG_RX[9] E33
14 FD I_TXN 7 FD I1_TX#[3] PEG_RX[10] F32
PEG_RX[11] D 34
14 FD I_TXP0
A22
G19 FD I0_TX[0]
PEG_RX[12]
PEG_RX[13]
E31
C 33 Processor 1/7-DMI,
a
14 FD I_TXP1 E20 FD I0_TX[1] PEG_RX[14] B32
CAD NOTE: DP_COMPIO and ICOMPO signals 14 FD I_TXP2 G18 FD I0_TX[2] PEG_RX[15]
should be shorted near balls and routed with
- typical impedance < 25 mohms
14
14
14
FD I_TXP3
FD I_TXP4
FD I_TXP5
B20
C 19
D 19
FD I0_TX[3]
FD I1_TX[0]
FD I1_TX[1]
PEG_TX#[0]
PEG_TX#[1]
M29
M32
M31
FDI, PEG
14 FD I_TXP6 F17 FD I1_TX[2] PEG_TX#[2] L32
14 FD I_TXP7 FD I1_TX[3] PEG_TX#[3] L29
1.05VS 1.05VS J18 PEG_TX#[4] K31
14 FDI_FSY NC0 J17 FD I0_FSY NC PEG_TX#[5] K28
in
14 FDI_FSY NC1 FD I1_FSY NC PEG_TX#[6] J30
H 20 PEG_TX#[7] J28
14 FDI_INT FD I_INT PEG_TX#[8] H 29
J19 PEG_TX#[9] G27
R49 R48 14 FDI_LSY NC 0 H 17 FD I0_LSY NC PEG_TX#[10] E29
14 FDI_LSY NC 1 FD I1_LSY NC PEG_TX#[11] F27
EDP HPD Function Disable PEG_TX#[12]
*1K_1%_04 24.9_1%_04 D 28
EDP_HPD: Pull-up10K- DISABLED HPD PEG_TX#[13] F26
PEG_TX#[14] E25
ED P_COMPIO A18 PEG_TX#[15]
A17 eDP_COMPIO M28
DP Compensation Signal B16 eDP_ICOMPO PEG_TX[0] M33
ED P_HPD
eDP_HPD PEG_TX[1] M30
PEG_TX[2]
C 15
D 15
C 17
F16
C 16
G15
h
eDP_AUX
eDP_AUX#
eDP_TX[0]
eDP_TX[1]
eDP_TX[2]
eDP
PEG_TX[3]
PEG_TX[4]
PEG_TX[5]
PEG_TX[6]
PEG_TX[7]
PEG_TX[8]
PEG_TX[9]
PEG_TX[10]
L31
L28
K30
K27
J29
J27
H 28
G28
E28
.c
eDP_TX[3] PEG_TX[11] F28
C 18 PEG_TX[12] D 27
E16 eDP_TX#[0] PEG_TX[13] E26
D 16 eDP_TX#[1] PEG_TX[14] D 25
F15 eDP_TX#[2] PEG_TX[15]
eDP_TX#[3]
T2
w
3.3V PTH1
10K_1%_NTC_06
1 2
THERM_VOLT 28
R 192
w
10K_1%_04
PLACE NEAR U3
w
Processor 1/7-DMI, FDI, PEG B - 3

Schematic Diagrams
Processor 2/7- CLK, MISC
m
Ivy Bridge Processor 2/7 ( CLK,MISC,JTAG )
o
Processor Pullups/Pull downs
PU/PD for JTAG signals 1.05VS
1.05VS
H_PROCHOT# R22 62_04
.c
R41 *51_04 XDP_TMS
R37 *51_04 XDP_TDI_R CAD Note: Use pad sharing method
R38 *51_04 XDP_PREQ# U13B H_CPUPWRGD_R10K_04 R33
R40 *51_04 XDP_TDO_R
for following clock resistor placement
R43 *51_04 XDP_TCLK
R39 51_04 XDP_TRST# TRACE WIDTH 10MIL, LENGTH <500MILS
A28
CLK_EXP_P 13
MISC
CLOCKS
H_SNB_IVB# C26 BCLK A27
17,29 H_SNB_IVB# PROC_SELECT# BCLK# CLK_EXP_N 13
3.3VS AN34
SKTOCC# A16
DPLL_REF_CLK A15 CLK_DP_P 13
R293 *1K_04 XDP_DBR_R DPLL_REF_CLK# CLK_DP_N 13 DDR3 Compensation Signals
x
CAD NOTE: All DDR_COMP signals
H_CATERR# AL33 SM_RCOMP_0 R60 140_1%_04
CATERR# should be routed such that :-
If PROCHOT# is not used, 3/23 - max length = 500 mils SM_RCOMP_1 R53 25.5_1%_04
THERMAL
then it must be terminated - trace width = 15mils and
Sheet 3 of 42 with a 56-£[ +-5% pull-up 17,28,29 H_PECI
R27 *10mil_short AN33
PECI SM_DRAMRST#
R8 CPUDRAMRST#
- MB trace impedance < 68 mohms
SM_RCOMP_2 R57 200_1%_04
DDR3
MISC
resistor to 1.05VS . (worst case resistance)
fi
Processor 2/7-CLK, 33 H_PROCHOT#
H_PROCHOT# R26 56_1%_04 H_PROCHOT#_D AL32
PROCHOT# SM_RCOMP[0]
SM_RCOMP[1]
SM_RCOMP[2]
AK1
A5
A4
SM_RCOMP_0
SM_RCOMP_1
SM_RCOMP_2
MISC 17 H_THRMTRIP# R36 *10mil_short AN32

THERMTRIP#
AP29 XDP_PRDY#
PRDY # AP27
a
XDP_PREQ#
PREQ#
AR26 XDP_TCLK S3 circuit:- DRAM PWR GOOD logic
PWR MANAGEMENT
TCK AR27
JTAG & BPM

XDP_TMS
AM34 TMS AP30 XDP_TRST#
14,29 H_PM_SY NC PM_SYNC TRST#
AR28 XDP_TDI_R
TDI AP26 XDP_TDO_R
R34 *10mil_short H_CPUPWRGD_R AP33 TDO 1.5VS_CPU
17,29 H_CPUPWRGD
in
UNCOREPW RGOOD
AL35 XDP_DBR_R
PMSY S_PWRGD_BUF R292 130_1%_04 VDDPW RGOOD_R V8 DBR# R62
SM_DRAMPWROK
200_1%_04
AT28 XDP_BPM0_R
1.05VS BPM#[0] AR29 XDP_BPM1_R
Buffered reset to CPU BPM#[1] AR30 XDP_BPM2_R R61 *10mil_04 PMSY S_PWRGD_BUF
BUF_CPU_RST# AR33 BPM#[2] AT30 XDP_BPM3_R 14,29 PM_DRAM_PWRGD
RESET# BPM#[3] AP32 XDP_BPM4_R
3.3VS R296 BPM#[4] AR31 XDP_BPM5_R
BPM#[5] AT31 XDP_BPM6_R
75_04 BPM#[6] AR32 XDP_BPM7_R
BPM#[7]
R297 R295
h
43.2_1%_04 BUF_CPU_RST#
6
10K_04 D T2
Q14A
2G MTDN7002ZHS6R
S H_PROCHOT#
1
3
D
Q3
.c
5G Q14B
16,22 PLT_RST# S MTDN7002ZHS6R G
28 H_PROCHOT#_EC C162
4
MTN7002ZHS3
S3 circuit:- DRAM_RST# to memory
S
R105 47p_50V_NPO_04
R294
C335 100K_04
should be high during S3
100K_04 1.5V
*68p_50V_NPO_04
CAD Note: Capacitor need to be placed R74

close to buffer output pin R75 *0_04
1K_04
Q1
MTN7002ZHS3
w
CPUDRAMRST# S D R72 1K_04 DDR3_DRAMRST# 9,10
DRAMRST_CNTRL 6,13
G
R76 C151
4.99K_1%_04 0.047u_10V_X7R_04
w
w
B - 4 Processor 2/7- CLK, MISC

Schematic Diagrams
Processor 3/7- (DDR3)
m
Ivy Bridge Processor 3/7 ( DDR3 )
o
U13C U13D
.c
AB6 AE2
9 M_A_DQ[63:0] SA_CK[0] AA6 M_A_CLK_DDR0 9 10 M_B_DQ[63:0] SB_CK[0] AD2 M_B_CLK_DDR2 10
C5 SA_CLK#[0] V9 M_A_CLK_DDR#0 9 C9 SB_CLK#[0] R9 M_B_CLK_DDR#2 10
M_A_DQ0 M_B_DQ0
D5 SA_DQ[0] SA_CKE[0] M_A_CKE0 9 A7 SB_DQ[0] SB_CKE[0] M_B_CKE2 10
M_A_DQ1 M_B_DQ1
M_A_DQ2 D3 SA_DQ[1] M_B_DQ2 D10 SB_DQ[1]
M_A_DQ3 D2 SA_DQ[2] M_B_DQ3 C8 SB_DQ[2]
M_A_DQ4 D6 SA_DQ[3] AA5 M_B_DQ4 A9 SB_DQ[3] AE1
C6 SA_DQ[4] SA_CK[1] AB5 M_A_CLK_DDR1 9 A8 SB_DQ[4] SB_CK[1] AD1 M_B_CLK_DDR3 10
M_A_DQ5 M_B_DQ5
C2 SA_DQ[5] SA_CLK#[1] V10 M_A_CLK_DDR#1 9 D9 SB_DQ[5] SB_CLK#[1] R10 M_B_CLK_DDR#3 10
M_A_DQ6 M_B_DQ6
C3 SA_DQ[6] SA_CKE[1] M_A_CKE1 9 D8 SB_DQ[6] SB_CKE[1] M_B_CKE3 10
M_A_DQ7 M_B_DQ7
M_A_DQ8 F10 SA_DQ[7] M_B_DQ8 G4 SB_DQ[7]
M_A_DQ9 F8 SA_DQ[8] M_B_DQ9 F4 SB_DQ[8]
x
M_A_DQ10 G10 SA_DQ[9] AB4 M_B_DQ10 F1 SB_DQ[9] AB2
M_A_DQ11 G9 SA_DQ[10] SA_CK[2] AA4 M_B_DQ11 G1 SB_DQ[10] SB_CK[2] AA2
M_A_DQ12 F9 SA_DQ[11] SA_CLK#[2] W9 M_B_DQ12 G5 SB_DQ[11] SB_CLK#[2] T9
M_A_DQ13 F7 SA_DQ[12] SA_CKE[2] M_B_DQ13 F5 SB_DQ[12] SB_CKE[2]
M_A_DQ14 G8 SA_DQ[13] M_B_DQ14 F2 SB_DQ[13]
M_A_DQ15 G7 SA_DQ[14] M_B_DQ15 G2 SB_DQ[14]
M_A_DQ16 K4 SA_DQ[15] AB3 M_B_DQ16 J7 SB_DQ[15] AA1
K5 SA_DQ[16] SA_CK[3] AA3 J8 SB_DQ[16] SB_CK[3] AB1
fi
M_A_DQ17 M_B_DQ17
SA_DQ[17] SA_CLK#[3] SB_DQ[17] SB_CLK#[3]
M_A_DQ18
M_A_DQ19
M_A_DQ20
K1
J1
J5
SA_DQ[18]
SA_DQ[19]
SA_DQ[20]
SA_CKE[3]
W10 M_B_DQ18
M_B_DQ19
M_B_DQ20
K10
K9
J9
SB_DQ[18]
SB_DQ[19]
SB_DQ[20]
SB_CKE[3]
T10
Sheet 4 of 42
M_A_DQ21 J4 M_B_DQ21 J10
M_A_DQ22
M_A_DQ23
M_A_DQ24
J2
K2
M8
SA_DQ[21]
SA_DQ[22]
SA_DQ[23]
SA_CS#[0]
SA_CS#[1]
AK3
AL3
AG1
M_A_CS#0 9
M_A_CS#1 9
M_B_DQ22
M_B_DQ23
M_B_DQ24
K8
K7
M5
SB_DQ[21]
SB_DQ[22]
SB_DQ[23]
SB_CS#[0]
SB_CS#[1]
AD3
AE3
AD6
M_B_CS#2 10
M_B_CS#3 10
Processor 3/7-
SA_DQ[24] SA_CS#[2] SB_DQ[24] SB_CS#[2]
M_A_DQ25
M_A_DQ26
M_A_DQ27
N10
N8
N7
SA_DQ[25]
SA_DQ[26]
SA_CS#[3]
AH1 M_B_DQ25
M_B_DQ26
M_B_DQ27
N4
N2
N1
SB_DQ[25]
SB_DQ[26]
SB_CS#[3]
AE6
(DDR3)
a
M_A_DQ28 M10 SA_DQ[27] M_B_DQ28 M4 SB_DQ[27]
M_A_DQ29 M9 SA_DQ[28] AH3 M_B_DQ29 N5 SB_DQ[28] AE4
N9 SA_DQ[29] SA_ODT[0] AG3 M_A_ODT0 9 M2 SB_DQ[29] SB_ODT[0] AD4 M_B_ODT2 10
M_A_DQ30 M_B_DQ30
DDR SYSTEM MEMORY B

M7 SA_DQ[30] SA_ODT[1] AG2 M_A_ODT1 9 M1 SB_DQ[30] SB_ODT[1] AD5 M_B_ODT3 10
DDR SYSTEM MEMORY A
M_A_DQ31 M_B_DQ31
M_A_DQ32 AG6 SA_DQ[31] SA_ODT[2] AH2 M_B_DQ32 AM5 SB_DQ[31] SB_ODT[2] AE5
M_A_DQ33 AG5 SA_DQ[32] SA_ODT[3] M_B_DQ33 AM6 SB_DQ[32] SB_ODT[3]
M_A_DQ34 AK6 SA_DQ[33] M_B_DQ34 AR3 SB_DQ[33]
AK5 SA_DQ[34] AP3 SB_DQ[34]
in
M_A_DQ35 M_B_DQ35
M_A_DQ36 AH5 SA_DQ[35] M_B_DQ36 AN3 SB_DQ[35]
M_A_DQ37 AH6 SA_DQ[36] C4 M_A_DQS#0 M_A_DQS#[7:0] 9 M_B_DQ37 AN2 SB_DQ[36] D7 M_B_DQS#0 M_B_DQS#[7:0] 10
M_A_DQ38 AJ5 SA_DQ[37] SA_DQS#[0] G6 M_A_DQS#1 M_B_DQ38 AN1 SB_DQ[37] SB_DQS#[0] F3 M_B_DQS#1
M_A_DQ39 AJ6 SA_DQ[38] SA_DQS#[1] J3 M_A_DQS#2 M_B_DQ39 AP2 SB_DQ[38] SB_DQS#[1] K6 M_B_DQS#2
M_A_DQ40 AJ8 SA_DQ[39] SA_DQS#[2] M6 M_A_DQS#3 M_B_DQ40 AP5 SB_DQ[39] SB_DQS#[2] N3 M_B_DQS#3
M_A_DQ41 AK8 SA_DQ[40] SA_DQS#[3] AL6 M_A_DQS#4 M_B_DQ41 AN9 SB_DQ[40] SB_DQS#[3] AN5 M_B_DQS#4
M_A_DQ42 AJ9 SA_DQ[41] SA_DQS#[4] AM8 M_A_DQS#5 M_B_DQ42 AT5 SB_DQ[41] SB_DQS#[4] AP9 M_B_DQS#5
M_A_DQ43 AK9 SA_DQ[42] SA_DQS#[5] AR12 M_A_DQS#6 M_B_DQ43 AT6 SB_DQ[42] SB_DQS#[5] AK12 M_B_DQS#6
M_A_DQ44 AH8 SA_DQ[43] SA_DQS#[6] AM15 M_A_DQS#7 M_B_DQ44 AP6 SB_DQ[43] SB_DQS#[6] AP15 M_B_DQS#7
M_A_DQ45 AH9 SA_DQ[44] SA_DQS#[7] M_B_DQ45 AN8 SB_DQ[44] SB_DQS#[7]
M_A_DQ46 AL9 SA_DQ[45] M_B_DQ46 AR6 SB_DQ[45]
M_A_DQ48
M_A_DQ49
M_A_DQ50
M_A_DQ51
M_A_DQ52
M_A_DQ53
M_A_DQ54
M_A_DQ55
AP11
AN11
AL12
AM12
AM11
AL11
AP12
AN12
SA_DQ[47]
SA_DQ[48]
SA_DQ[49]
SA_DQ[50]
SA_DQ[51]
SA_DQ[52]
SA_DQ[53]
SA_DQ[54]
SA_DQS[0]
SA_DQS[1]
SA_DQS[2]
SA_DQS[3]
SA_DQS[4]
SA_DQS[5]
D4
F6
K3
N6
AL5
AM9
AR11
M_A_DQS0
M_A_DQS1
M_A_DQS2
M_A_DQS3
M_A_DQS4
M_A_DQS5
M_A_DQS6
h
M_A_DQS[7:0] 9
M_B_DQ48
M_B_DQ49
M_B_DQ50
M_B_DQ51
M_B_DQ52
M_B_DQ53
M_B_DQ54
M_B_DQ55
AR9
AJ11
AT8
AT9
AH11
AR8
AJ12
AH12
SB_DQ[47]
SB_DQ[48]
SB_DQ[49]
SB_DQ[50]
SB_DQ[51]
SB_DQ[52]
SB_DQ[53]
SB_DQ[54]
SB_DQS[0]
SB_DQS[1]
SB_DQS[2]
SB_DQS[3]
SB_DQS[4]
SB_DQS[5]
C7
G3
J6
M3
AN6
AP8
AK11
M_B_DQS0
M_B_DQS1
M_B_DQS2
M_B_DQS3
M_B_DQS4
M_B_DQS5
M_B_DQS6
M_B_DQS[7:0] 10
.c
M_A_DQ56 AJ14 SA_DQ[55] SA_DQS[6] AM14 M_A_DQS7 M_B_DQ56 AT11 SB_DQ[55] SB_DQS[6] AP14 M_B_DQS7
M_A_DQ57 AH14 SA_DQ[56] SA_DQS[7] M_B_DQ57 AN14 SB_DQ[56] SB_DQS[7]
M_A_DQ59 AK15 SA_DQ[58] M_B_DQ59 AT14 SB_DQ[58]
M_A_DQ60 AL14 SA_DQ[59] M_B_DQ60 AT12 SB_DQ[59]
AK14 SA_DQ[60] AD10 M_A_A[15:0] 9 AN15 SB_DQ[60] AA8 M_B_A[15:0] 10
M_A_DQ61 M_A_A0 M_B_DQ61 M_B_A0
M_A_DQ62 AJ15 SA_DQ[61] SA_MA[0] W1 M_A_A1 M_B_DQ62 AR15 SB_DQ[61] SB_MA[0] T7 M_B_A1
M_A_DQ63 AH15 SA_DQ[62] SA_MA[1] W2 M_A_A2 M_B_DQ63 AT15 SB_DQ[62] SB_MA[1] R7 M_B_A2
SA_DQ[63] SA_MA[2] W7 M_A_A3 SB_DQ[63] SB_MA[2] T6 M_B_A3
SA_MA[3] V3 M_A_A4 SB_MA[3] T2 M_B_A4
SA_MA[4] V2 M_A_A5 SB_MA[4] T4 M_B_A5
SA_MA[5] W3 M_A_A6 SB_MA[5] T3 M_B_A6
AE10 SA_MA[6] W6 M_A_A7 AA9 SB_MA[6] R2 M_B_A7
w
9 M_A_BS0 AF10 SA_BS[0] SA_MA[7] V1 10 M_B_BS0 AA7 SB_BS[0] SB_MA[7] T5

M_A_A8 M_B_A8
9 M_A_BS1 V6 SA_BS[1] SA_MA[8] W5 10 M_B_BS1 R6 SB_BS[1] SB_MA[8] R3
M_A_A9 M_B_A9
9 M_A_BS2 SA_BS[2] SA_MA[9] AD8 10 M_B_BS2 SB_BS[2] SB_MA[9] AB7
M_A_A10 M_B_A10
SA_MA[10] V4 M_A_A11 SB_MA[10] R1 M_B_A11
SA_MA[11] W4 M_A_A12 SB_MA[11] T1 M_B_A12
AE8 SA_MA[12] AF8 M_A_A13 AA10 SB_MA[12] AB10 M_B_A13
9 M_A_CAS# AD9 SA_CAS# SA_MA[13] V5 10 M_B_CAS# AB8 SB_CAS# SB_MA[13] R5
M_A_A14 M_B_A14
9 M_A_RAS# AF9 SA_RAS# SA_MA[14] V7 10 M_B_RAS# AB9 SB_RAS# SB_MA[14] R4
M_A_A15 M_B_A15
9 M_A_WE# SA_WE# SA_MA[15] 10 M_B_WE# SB_WE# SB_MA[15]
w
T2 T2
w
Processor 3/7- (DDR3) B - 5

Schematic Diagrams
Processor 4/7- Power

Ivy Bridge Processor 4/7 ( POWER )
m
PROCESSOR CORE POWER
U13F POWER
VCORE
PROCESSOR UNCORE POWER
o
48A 8.5A 1.05VS
AG35
VCC1
8.5A
AG34 AH13
AG33 VCC2 VCCIO1 AH10
AG32 VCC3 VCCIO2 AG10 C80 C78 C69 C81 C76
VCC4 VCCIO3 + C340
AG31 AC10
AG30 VCC5 VCCIO4 Y10 22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 560u_2.5V_6.6*6.6*5.9
VCC6 VCCIO5
.c
AG29 U10
AG28 VCC7 VCCIO6 P10
VCORE AG27 VCC8 VCCIO7 L10
AG26 VCC9 VCCIO8 J14
AF35 VCC10 VCCIO9 J13 C72 C67 C79 C71 C329
VCC11 VCCIO10 + C332
C45 C42 C36 C44 C49 AF34 J12
AF33 VCC12 VCCIO11 J11 22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 *220u_6.3V_6.3*6.3*4.2
VCC13 VCCIO12
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
AF32 H14
AF31 VCC14 VCCIO13 H12
AF30 VCC15 VCCIO14 H11
AF29 VCC16 VCCIO15 G14
AF28 VCC17 VCCIO16 G13 C83 C84 C328 C85 C82
PEG AND DDR

AF27 VCC18 VCCIO17 G12
AF26 VCC19 VCCIO18 F14 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08
AD35 VCC20 VCCIO19 F13
x
AD32 VCC23 VCCIO22 E14
AD31 VCC24 VCCIO23 E12 C327 C86 C77 C75 C333
C312 C58 C48 C310 C39 AD30 VCC25 VCCIO24
Sheet 5 of 42 AD29 VCC26

VCC27 VCCIO25
E11 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
AD28 D14
AD27 VCC28 VCCIO26 D13
fi
AD26 VCC29 VCCIO27 D12
Processor 4/7- AC35

AC34
AC33
VCC30
VCC31
VCC32
VCCIO28
VCCIO29
VCCIO30
D11
C14
C13
C331 C334 C68
AC32 VCC33 VCCIO31 C12

Power AC31
AC30
AC29
VCC34
VCC35
VCC36
VCCIO32
VCCIO33
VCCIO34
C11
B14
B12
*22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
AC28 VCC37 VCCIO35 A14

AC27 VCC38 VCCIO36 A13 C70 C322 C326
C52 C57 C311 C309 C313 AC26 VCC39 VCCIO37 A12
a
AA35 VCC40 VCCIO38 A11 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
VCC41 VCCIO39
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
AA34
AA33 VCC42 J23 1.05VS_VCCP_F R45 *15mil_short_06
AA32 VCC43 VCCIO40 1.05VS
AA31 VCC44
AA30 VCC45
AA29 VCC46
AA28 VCC47
AA27 VCC48
in
AA26 VCC49
CORE SUPPLY
Y35 VCC50
Y34 VCC51 CAD Note: H_CPU_SVIDALRT#_R,H_CPU_SVIDDAT_R
Y33 VCC52 Place the PU resistors close to CPU
Y32 VCC53
Y31 VCC54 SVID Signals
Y30 VCC55
Y29 VCC56 1.05VS
VCORE Y28 VCC57
Y27 VCC58
Y26 VCC59 H_CPU_SVIDALRT# R20 75_04
C51 C37 C41 C38 C35 V35 VCC60 H_CPU_SVIDCLK R21 *54.9_1%_04
SVID
V34 VCC61 AJ29 H_CPU_SVIDALRT#_R R29 43.2_1%_04 H_CPU_SVIDDAT_R R19 130_1%_04
VCC62 VIDALERT# H_CPU_SVIDALRT# 33
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
V33 AJ30 H_CPU_SVIDCLK_R R30 *20mil_04 H_CPU_SVIDCLK 33
h V32
V31
V30
V29
V28
V27
V26
U35
U34
VCC63
VCC64
VCC65
VCC66
VCC67
VCC68
VCC69
VCC70
VCC71
VIDSCLK
VIDSOUT
AJ28 H_CPU_SVIDDAT_R
VCORE
R28 *20mil_04 H_CPU_SVIDDAT 33
CAD Note: H_CPU_SVIDCLK_R

Place the PU
resistors close to VR
.c
U33 VCC72
U32 VCC73 PR59
C40 C50 C56 C43 C46 U31 VCC74
VCC75 100_04
U30
VCC76
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
10u_6.3V_X5R_06
U29
U28 VCC77
U27 VCC78
U26 VCC79 VCORE_VCC_SENSE 33
R35 VCC80 VCORE_VSS_SENSE 33
R34 VCC81 PR64
R33 VCC82
VCC83 100_04
R32
R31 VCC84 1.05VS
R30 VCC85
w
R29 VCC86
SENSE LINES
R28 VCC87
R27 VCC88 AJ35 R51
R26 VCC89 VCC_SENSE AJ34
P35 VCC90 VSS_SENSE *10_04
P34 VCC91
P33 VCC92
P32 VCC93 B10
P31 VCC94 VCCIO_SENSE A10 VCCP_SENSE 32
P30 VCC95 VSS_SENSE_VCCIO VSSP_SENSE 32
P29 VCC96
w
P28 VCC97
P27 VCC98
P26 VCC99 R50
VCC100
*10_04
w
T2
B - 6 Processor 4/7- Power

Schematic Diagrams
Processor 5/7- GFX PWR
m
Ivy Bridge Processor 5/7 ( GRAPHICS POWER )
o
1.5VS_CPU
U13G
POWER R59
VGFX_CORE
33A Q13 1K_1%_04
SENSE
LINES
.c
AT24 AK35 *AO3402L
AT23 VAXG1 VAXG_SENSE AK34 VR1_VCCGT_SENSEA 33 S D
V_SM_VREF V_SM_VREF_CNT
AT21 VAXG2 VSSAXG_SENSE VR1_VSSGT_SENSEA 33
C64 C61 C324 C62 C325
AT20 VAXG3 R55
22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 AT18 VAXG4 R58 C93
G
AT17 VAXG5 *100K_1%_04
VAXG6
0.1u_10V_X5R_04
AR24 1K_1%_04
AR23 VAXG7
AR21 VAXG8
VAXG9 3/23
AR20
C74 C63 C73 C59 C66 AR18 VAXG10 AL1 V_SM_VREF R54 *20mil_04 V_SM_VREF_CNT
AR17 VAXG11 SM_VREF SUSB# 14,28,29
VREF
22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 AP24 VAXG12
AP23 VAXG13
AP21 VAXG14
x
AP20 VAXG15 B4 VREF_CH_A_DIMM
AP18 VAXG16 SA_DIMM_VREFDQ D1 VREF_CH_B_DIMM
AP17 VAXG17 SB_DIMM_VREFDQ
C60 C65 C321 C53 AN24 VAXG18
AN23 VAXG19
22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 AN21 VAXG20
AN20 VAXG21 CAD Note: +V_SM_VREF should
DDR3 -1.5V RAILS

AN18 VAXG22 have 10 mil trace width 1.5VS_CPU
12A
fi
AN17 VAXG23
GRAPHICS
VAXG24
+
C330
AM24
AM23
AM21
AM20
VAXG25
VAXG26
VAXG27
VDDQ1
VDDQ2
VDDQ3
AF7
AF4
AF1
AC7
C88 C90 C92 + C342
Sheet 6 of 42
VAXG28 VDDQ4
AM18
VAXG29 VDDQ5
AC4 *10u_6.3V_X5R_06 10u_6.3V_X5R_06 10u_6.3V_X5R_06 220u_6.3V_6.3*6.3*4.2
Processor 5/7- GFX
*330uF_2.5V_9m_6.3*6
AM17 AC1 2/22

AL24 VAXG30 VDDQ6 Y7
AL23 VAXG31 VDDQ7 Y4
VAXG32 VDDQ8
AL21
AL20
AL18
VAXG33
VAXG34
VDDQ9
VDDQ10
Y1
U7
U4
C91 C87 C89 PWR
a
AL17 VAXG35 VDDQ11 U1 10u_6.3V_X5R_06 10u_6.3V_X5R_06 10u_6.3V_X5R_06
AK24 VAXG36 VDDQ12 P7
AK20 VAXG39 VDDQ15
AK18 VAXG40
AK17 VAXG41
AJ24 VAXG42
AJ23 VAXG43
in
AJ21 VAXG44
AJ20 VAXG45 0.85VS
AJ18 VAXG46
VAXG47
6A
AJ17 M27
SA RAIL
AH24 VAXG48 VCCSA1 M26
AH23 VAXG49 VCCSA2 L26
AH21 VAXG50 VCCSA3 J26 C47 C54 C55
AH20 VAXG51 VCCSA4 J25
AH18 VAXG52 VCCSA5 J24 10u_6.3V_X5R_06 *10u_6.3V_X5R_06 10u_6.3V_X5R_06
AH17 VAXG53 VCCSA6 H26
VAXG54 VCCSA7 H25
VCCSA8 1.05VS
h
1.8V RAIL
H23 VCCSA_SENSE R25 R31

1.8VS VCCSA_SENSE VCCSA_SENSE 31
1.2A *10K_04 *10K_04
B6
MISC
A6 VCCPLL1 C22
A2 VCCPLL2 VCCSA_VID[0] C24 VCCSA_VID0 31
C338 C337 C336 VCCSA_VID1 31
VCCPLL3 VCCSA_VID[1]
.c
22u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04
R287 R288
A19 H_SNB_IVB#_PWRCTRL_R R46 100K_1%_04
VCCIO_SEL 3.3V 1.5V
10K_04 10K_04
T2
1.5V
¾aDIMMºÝÂ\©ñ & TRACE¥[¼e
R299 *0_04 C94 C95
0.1u_10V_X5R_04
0.1u_10V_X5R_04
1.5V
R300
R80 *0_04 Q15
w
AO3402L 1K_1%_04 1.5VS_CPU

R78 VREF_CH_B_DIMM S D
MVREF_DQ_DIMMB 10
Q2 1K_1%_04
AO3402L R298 R305 C349
G
VREF_CH_A_DIMM S D *1K_04
MVREF_DQ_DIMMA 9
1K_1%_04 0.1u_10V_X5R_04
R81 R77 C150

G
*1K_04
1K_1%_04 0.1u_10V_X5R_04
w
DRAMRST_CNTRL 3,13
DRAMRST_CNTRL 3,13
w
Processor 5/7- GFX PWR B - 7

Schematic Diagrams
Processor 6/7- GND
m
Ivy Bridge Processor 6/7 ( GND )
o
U13H U13I
AT35 AJ22
AT32 VSS1 VSS81 AJ19
AT29 VSS2 VSS82 AJ16 T35 F22
.c
AT27 VSS3 VSS83 AJ13 T34 VSS161 VSS234 F19
AT25 VSS4 VSS84 AJ10 T33 VSS162 VSS235 E30
CAD Note: 0 ohm resistor AT10 VSS9 VSS89 AJ1 T28 VSS167 VSS240 E15
should be placed close AT7 VSS10 VSS90 AH35 T27 VSS168 VSS241 E13
VSS11 VSS91 VSS169 VSS242
AT4 AH34 T26 E10

to CPU AT3 VSS12 VSS92 AH32 P9 VSS170 VSS243 E9
AR25 VSS13 VSS93 AH30 P8 VSS171 VSS244 E8
x
AR22 AH29 P6 E7
AR10 VSS18 VSS99 AH19 N35 VSS176 VSS249 E3
fi
AR2 VSS21 VSS102 AH4 N32 VSS179 VSS252 D35
Sheet 7 of 42 AP34
AP31
AP28
VSS22
VSS23
VSS24
VSS103
VSS104
VSS105
AG9
AG8
AG4
N31
N30
N29
VSS180
VSS181
VSS182
VSS253
VSS254
VSS255
D32
D29
D26
Processor 6/7- GND AP25
AP22
AP19
VSS26
VSS27
VSS107
VSS108
AF6
AF5
AF3
N28
N27
N26
VSS184
VSS185
VSS257
VSS258
D20
D17
C34
AP16 VSS28 VSS109 AF2 M34 VSS186 VSS259 C31
AP13 VSS29 VSS110 AE35 L33 VSS187 VSS260 C28
a
AN30 VSS34 VSS115 AE30 L6 VSS192 VSS265 C1
AN27 VSS35 VSS116 AE29 L5 VSS193 VSS266 B22
AN22 VSS37
VSS VSS118 AE27 L3 VSS195
VSS VSS268 B17
in
AN13 VSS40 VSS121 AD7 K35 VSS198 VSS271 B11
AN10 VSS41 VSS122 AC9 K32 VSS199 VSS272 B9
AM29 VSS44 VSS125 AC5 J34 VSS202 VSS275 B5
AM25 VSS45 VSS126 AC3 J31 VSS203 VSS276 B3
AM22 VSS46 VSS127 AC2 H33 VSS204 VSS277 B2
AM19 VSS47 VSS128 AB35 H30 VSS205 VSS278 A35
AM16 VSS48 VSS129 AB34 H27 VSS206 VSS279 A32
h
AM13
AM10
AM7
AM4
AM3
AM2
AM1
AL34
VSS50
VSS51
VSS52
VSS53
VSS54
VSS55
VSS56
VSS131
VSS132
VSS133
VSS134
VSS135
VSS136
VSS137
AB33
AB32
AB31
AB30
AB29
AB28
AB27
AB26
H24
H21
H18
H15
H13
H10
H9
H8
VSS208
VSS209
VSS210
VSS211
VSS212
VSS213
VSS214
VSS281
VSS282
VSS283
VSS284
VSS285
A29
A26
A23
A20
A3
.c
AL31 VSS57 VSS138 Y9 H7 VSS215
AL13 VSS63 VSS144 W35 H1 VSS221
AL10 VSS64 VSS145 W34 G35 VSS222
VSS68 VSS149 VSS226
w
AK33 W30 G23

AK30 VSS69 VSS150 W29 G20 VSS227
AK22 VSS72 VSS153 W26 F34 VSS230
AK19 VSS73 VSS154 U9 F31 VSS231
AK16 VSS74 VSS155 U8 F29 VSS232
AK13 VSS75 VSS156 U6 VSS233
AK10 VSS76 VSS157 U5
w
AK7 VSS77 VSS158 U3

AK4 VSS78 VSS159 U2
AJ25 VSS79 VSS160
VSS80
T2 T2
w
B - 8 Processor 6/7- GND

Schematic Diagrams
Processor 7/7- RSVD
m
Ivy Bridge Processor 7/7 ( RESERVED )
CFG Straps for Processor
o
PEG Static Lane Reversal - CFG2 is for the 16x
1:(Default) Normal Operation; Lane #

CFG2 definition matches socket pin map definition U13E
.c
0:Lane Reversed
AH27
CFG0 AK28 VCC_DIE_SENSE AH26
CFG2 R42 *1K_04 AK29 CFG[0] VSS_DIE_SENSE
CFG2 AL26 CFG[1]
AL27 CFG[2]
CFG4 AK26 CFG[3] L7
CFG5 AL29 CFG[4] RSVD28 AG7
CFG6 AL30 CFG[5] RSVD29 AE7
CFG7 AM31 CFG[6] RSVD30 AK2
AM32 CFG[7] RSVD31
x
CFG
AM30 CFG[8] W8
Display Port Presence Strap AM28 CFG[9] RSVD32
AM26 CFG[10]
1:(Default) Disabled; No Physical Display Port AN28 CFG[11] AT26
CFG4 attached to Embedded Display Port
0:Enabled; An external Display Port device is
AN31
AN26
AM27
CFG[12]
CFG[13]
CFG[14]
RSVD33
RSVD34
RSVD35
AM33
AJ27 Sheet 8 of 42
fi
connected to the Embedded Display Port AK31
AN29
CFG[15]
CFG[16]
CFG[17]
Processor 7/7-
CFG4 R289 *1K_04 RSVD37
RSVD38
T8
J16
RSVD
H_CPU_RSVD1 AJ31 H16
H_CPU_RSVD2 AH31 VAXG_VAL_SENSE RSVD39 G16
H_CPU_RSVD3 AJ33 VSSAXG_VAL_SENSE RSVD40
a
H_CPU_RSVD4 AH33 VCC_VAL_SENSE
VSS_VAL_SENSE
AJ26 AR35
RSVD5 RSVD_NCTF41 AT34
RESERVED
RSVD_NCTF42 AT33
RSVD_NCTF43 AP35
RSVD_NCTF44 AR34
in
RSVD_NCTF45
F25
F24 RSVD8
F23 RSVD9
PCIE Port Bifurcation Straps D24 RSVD10 B34
G25 RSVD11 RSVD_NCTF46 A33
G24 RSVD12 RSVD_NCTF47 A34
11: (Default) x16 - Device 1 functions 1 and 2 disabled E23 RSVD13 RSVD_NCTF48 B35
10: x8, x8 - Device 1 function 1 enabled ; function 2 disabled D23 RSVD14 RSVD_NCTF49 C35
C30 RSVD15 RSVD_NCTF50
CFG[6:5] 01: Reserved - (Device 1 function 1 disabled ; function 2 enabled) A31 RSVD16
CFG5
CFG6
R18
00:
*1K_04
x8,x4,x4 - Device 1 functions 1 and 2 enabled
h B30
B29
D30
B31
A30
C29
RSVD17
RSVD18
RSVD19
RSVD20
RSVD21
RSVD22
RSVD23
RSVD51
RSVD52
AJ32
AK32
AN35
.c
R14 *1K_04
J20 BCLK_ITP AM35
B18 RSVD24 BCLK_ITP#
RSVD25
J15 AT2
RSVD27 RSVD_NCTF56 AT1
RSVD_NCTF57 AR1
RSVD_NCTF58
On CRB
H_SNB_IVB#_PWRCTRL = low, 1.0V B1
w
KEY
H_SNB_IVB#_PWRCTRL = high/NC, 1.05V
T2
PEG DEFER TRAINING
1: (Default) PEG Train immediately following xxRESETB de assertion
w
CFG7 0: PEG Wait for BIOS for training
CFG7 R17 *1K_04

w
Processor 7/7- RSVD B - 9

Schematic Diagrams
DDR3 SO-DIMM_0
m
SO-DIMM A
o
C141 *10p_50V_NPO_04
M_A_CLK_DDR0 M_A_CLK_D DR#0
JDIMM2A
4 M_A_A[15:0] M_A_A0 98 5 M_A_DQ0 M_A_DQ[63:0] 4
C133 *10p_50V_NPO_04 JDIMM2B
M_A_CLK_DDR1 M_A_CLK_D DR#1 M_A_A1 97 A0 DQ0 7 M_A_DQ1
.c
M_A_A2 96 A1 DQ1 15 M_A_DQ2
M_A_A3 95 A2 DQ2 17 M_A_DQ3 1.5V
M_A_A4 92 A3 DQ3 4 M_A_DQ4
M_A_A5 91 A4 DQ4 6 M_A_DQ5 75 44
M_A_A6 90 A5 DQ5 16 M_A_DQ6 76 VDD1 VSS16 48
Layout Note: M_A_A9 85 A8 DQ8 23 M_A_DQ9 87 VDD4 VSS19 55
signal/space/signal: M_A_A11 84 A10/AP DQ10 35 M_A_DQ11 93 VDD6 VSS21 61

8/4/8 M_A_A13 119 A12/BC# DQ12 24 M_A_DQ13 3.3VS 99 VDD8 VSS23 66
M_A_A15 78 A14 DQ14 36 M_A_DQ15 20mils 105 VDD10 VSS25 72
x
A15 DQ15 39 M_A_DQ16 106 VDD11 VSS26 127
109 DQ16 41 M_A_DQ17 C140 C149 111 VDD12 VSS27 128
4 M_A_BS0 108 BA0 DQ17 51 M_A_DQ18 112 VDD13 VSS28 133
1u_6.3V_X5R_04 0.1u_16V_Y 5V_04
Sheet 9 of 42 4
4
M_A_CS#0
M_A_CS#1
4 M_A_CLK_DDR0
121
101
103
S0#
S1#
CK0
DQ20
DQ21
DQ22
42
50
52
M_A_DQ21
M_A_DQ22
M_A_DQ23
123
124
VDD16
VDD17
VDD18
VSS31
VSS32
VSS33
139
144
145
fi
4 M_A_CLK_DDR#0 102 CK0# DQ23 57 M_A_DQ24 199 VSS34 150
DDR3 SO-DIMM_0 4 M_A_CLK_DDR1

4 M_A_CLK_DDR#1
4 M_A_CKE0
104
73
74
CK1
CK1#
CKE0
DQ24
DQ25
DQ26
59
67
69
M_A_DQ25
M_A_DQ26
M_A_DQ27
3.3VS 77
122
VDDSPD
NC1
VSS35
VSS36
VSS37
151
155
156
4 M_A_CKE1 115 CKE1 DQ27 56 M_A_DQ28 125 NC2 VSS38 161
R70 *10K_04
4 M_A_CAS# 110 CAS# DQ28 58 M_A_DQ29 NCTEST VSS39 162
4 M_A_RAS# 113 RAS# DQ29 68 M_A_DQ30 198 VSS40 167
4 M_A_WE# SA0_DIM0 197 WE# DQ30 70 M_A_DQ31 10 TS#_DIMM0_1 30 EVENT# VSS41 168
SA1_DIM0 201 SA0 DQ31 129 M_A_DQ32 3,10 DDR 3_DRAMRST# RESET# VSS42 172
202 SA1 DQ32 131 M_A_DQ33 C139 1u_6.3V_X5R_04 VSS43 173
10,13 SMB_CLK 200 SCL DQ33 141 M_A_DQ34 MVREF_DQA 1 VSS44 178
C134 *0.1u_16V_Y 5V_04
a
10,13 SMB_DATA SDA DQ34 143 M_A_DQ35 126 VREF_DQ VSS45 179
116 DQ35 130 M_A_DQ36 VREF_CA VSS46 184
4 M_A_ODT0 120 ODT0 DQ36 132 M_A_DQ37 MVREF_DIM0 VSS47 185
C137 1u_6.3V_X5R_04
4 M_A_ODT1 ODT1 DQ37 140 M_A_DQ38 2 VSS48 189
C136 *0.1u_16V_Y 5V_04
11 DQ38 142 M_A_DQ39 3 VSS1 VSS49 190
28 DM0 DQ39 147 M_A_DQ40 8 VSS2 VSS50 195
46 DM1 DQ40 149 M_A_DQ41 9 VSS3 VSS51 196
63 DM2 DQ41 157 M_A_DQ42 13 VSS4 VSS52
136 DM3 DQ42 159 M_A_DQ43 14 VSS5
in
153 DM4 DQ43 146 M_A_DQ44 19 VSS6
170 DM5 DQ44 148 M_A_DQ45 20 VSS7 VTT_MEM
187 DM6 DQ45 158 M_A_DQ46 25 VSS8
DM7 DQ46 160 M_A_DQ47 26 VSS9 203
4 M_A_DQS[7:0] M_A_D QS0 12 DQ47 163 M_A_DQ48
CLOSE TO SO-DIMM_0 31 VSS10 VTT1 204
M_A_D QS1 29 DQS0 DQ48 165 M_A_DQ49 32 VSS11 VTT2
M_A_D QS2 47 DQS1 DQ49 175 M_A_DQ50 37 VSS12 GND1
M_A_D QS3 64 DQS2 DQ50 177 M_A_DQ51 38 VSS13 G1 GND2
M_A_D QS4 137 DQS3 DQ51 164 M_A_DQ52 R73 1K_1%_04 MVREF_DIM0 43 VSS14 G2
M_A_D QS5 154 DQS4 DQ52 166 M_A_DQ53 1.5V VSS15
M_A_D QS6 171 DQS5 DQ53 174 M_A_DQ54 DDRRK-20401-TR4B
M_A_D QS7 188 DQS6 DQ54 176 M_A_DQ55 R71 C132
DQS7 DQ55 181 M_A_DQ56
4 M_A_DQS#[7:0] M_A_D QS#0 10 DQ56 183 M_A_DQ57
3.3VS
RN9
10K_8P4R_04
1
2
3
4
8 SA0_DIM0
7 SA1_DIM0
6
5 SA0_DIM1 10
SA1_DIM1 10
h M_A_D QS#1
M_A_D QS#2
M_A_D QS#3
M_A_D QS#4
M_A_D QS#5
M_A_D QS#6
M_A_D QS#7
27
45
62
135
152
169
186
DQS0#
DQS1#
DQS2#
DQS3#
DQS4#
DQS5#
DQS6#
DQS7#
DQ57
DQ58
DQ59
DQ60
DQ61
DQ62
DQ63
191
193
180
182
192
194
M_A_DQ58
M_A_DQ59
M_A_DQ60
M_A_DQ61
M_A_DQ62
M_A_DQ63
CLOSE TO SO-DIMM_0
1K_1%_04 0.1u_10V_X5R_04
.c
DDRRK-20401-TR4B
R69 1K_1%_04 MVREF_DQA R79 *0_04

VTT_MEM 1.5V MVREF_D Q_DIMMA 6
1.5V
R68 C138
C366 C135 C 123 C363 C364 1K_1%_04 0.1u_10V_X5R_04

+ C343 + C378 + C344
10u_6.3V_X5R_08 * 1u_6.3V_X5R_04 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 1u_6.3V_X5R_04
*560u_2.5V_6.6*6.6*5.9 *560u_2.5V_6.6*6.6*5.9 560u_2.5V_6.6*6.6*5.9
1.5V
w
C143 C144 C 126 C125 C127 C124 C129 C128 C130 C142
0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 * 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04
1.5V
w
C152 C154 C 153 C131 C147 C148 C146 C145
10u_6.3V_X5R_06 10u_6.3V_X5R_08 10u_6.3V_X5R_08 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04

w
B - 10 DDR3 SO-DIMM_0
Schematic Diagrams
DDR3 SO-DIMM_1
m
SO-DIMM B
JDIMM1B
C 106 *10p_50V_N PO_04
M_B_C LK_DD R 2 M_B_CLK_D DR #2
o
JDIMM1A 1. 5V
4 M_B_A[15:0] M_B_A0 98 5 M_B_D Q0 M_B_D Q[ 63:0] 4
C 104 *10p_50V_N PO_04
M_B_C LK_DD R 3 M_B_CLK_D DR #3 M_B_A1 97 A0 D Q0 7 M_B_D Q1 75 44
M_B_A2 96 A1 D Q1 15 M_B_D Q2 76 VDD 1 VSS16 48
.c
Layout Note: M_B_A9 85 A8 D Q8 23 M_B_D Q9 99 VDD 8 VSS23 66
signal/space/signal: M_B_A11 84 A10/AP D Q10 35 M_B_D Q11 105 VDD 10 VSS25 72
8/4/8 M_B_A13 119 A12/BC # D Q12 24 M_B_D Q13 111 VDD 12 VSS27 128
A15 D Q15 39 M_B_D Q16 118 VDD 15 VSS30 138
109 D Q16 41 M_B_D Q17 123 VDD 16 VSS31 139
4 M_B_BS0 108 BA0 D Q17 51 M_B_D Q18 124 VDD 17 VSS32 144
3.3VS
4 M_B_BS1 79 BA1 D Q18 53 M_B_D Q19 VDD 18 VSS33 145
20mils
x
4 M_B_BS2 114 BA2 D Q19 40 M_B_D Q20 199 VSS34 150
4 M_B_C S#2 121 S0# D Q20 42 M_B_D Q21 VDD SPD VSS35 151
4 M_B_C S#3 101 S1# D Q21 50 M_B_D Q22 77 VSS36 155
C120 C108
4 M_B_C LK_DD R2 103 CK0 D Q22 52 M_B_D Q23 122 NC 1 VSS37 156
4 M_B_C LK_DD R#2 102 CK0# D Q23 57 M_B_D Q24 125 NC 2 VSS38 161
Sheet 10 of 42
1u_6.3V_X5R _04 0.1u_16V_Y 5V_04
4 M_B_C LK_DD R3 104 CK1 D Q24 59 M_B_D Q25 NC TEST VSS39 162
4 M_B_C LK_DD R#3 73 CK1# D Q25 67 M_B_D Q26 198 VSS40 167
4 M_B_C KE2 74 CKE0 D Q26 69 M_B_D Q27 9 TS#_D IMM0_1 30 EVENT# VSS41 168
fi
4 M_B_C KE3 CKE1 D Q27 3,9 D DR 3_DR AMRST# RESET# VSS42
4
4
4
M_B_CAS#
M_B_RAS#
M_B_W E#
115
110
113
CAS#
RAS#
WE#
D Q28
D Q29
D Q30
56
58
68
M_B_D Q28
M_B_D Q29
M_B_D Q30
C121
C109
1u_6.3V_X5R _04
*0.1u_16V_Y 5V_04 MVREF_D QB 1
VREF_DQ
VSS43
VSS44
VSS45
172
173
178
DDR3 SO-DIMM_1
SA0_D IM1 197 70 M_B_D Q31 126 179
9 SA0_DI M1 SA1_D IM1 201 SA0 D Q31 129 M_B_D Q32 VREF_CA VSS46 184
9 SA1_DI M1 202 SA1 D Q32 131 M_B_D Q33 MVREF_D IM1 VSS47 185
C105 1u_6.3V_X5R _04
9,13 SMB_CLK 200 SCL D Q33 141 M_B_D Q34 2 VSS48 189
C103 *0.1u_16V_Y 5V_04
9,13 SMB_DATA SDA D Q34 143 M_B_D Q35 3 VSS1 VSS49 190
116 D Q35 130 M_B_D Q36 8 VSS2 VSS50 195
4 M_B_ODT2 120 OD T0 D Q36 132 M_B_D Q37 9 VSS3 VSS51 196
a
4 M_B_ODT3 OD T1 D Q37 140 M_B_D Q38 13 VSS4 VSS52
11 D Q38 142 M_B_D Q39 14 VSS5
28 DM0 D Q39 147 M_B_D Q40 19 VSS6
46 DM1 D Q40 149 M_B_D Q41 20 VSS7 VTT_MEM
63 DM2 D Q41 157 M_B_D Q42 25 VSS8
136 DM3 D Q42 159 M_B_D Q43 26 VSS9 203
153 DM4 D Q43 146 M_B_D Q44
CLOSE TO SO-DIMM1 31 VSS10 VTT1 204
170 DM5 D Q44 148 M_B_D Q45 32 VSS11 VTT2
in
187 DM6 D Q45 158 M_B_D Q46 37 VSS12 GN D1
DM7 D Q46 160 M_B_D Q47 38 VSS13 G1 GN D2
4 M_B_D QS[ 7: 0] M_B_DQS0 12 D Q47 163 M_B_D Q48 MVR EF_D IM1 43 VSS14 G2
R 65 1K_1%_04
M_B_DQS1 29 DQS0 D Q48 165 M_B_D Q49 1.5V VSS15
M_B_DQS2 47 DQS1 D Q49 175 M_B_D Q50 DD R RK-20401-TP8D
M_B_DQS3 64 DQS2 D Q50 177 M_B_D Q51 R 63 C 102
M_B_DQS4 137 DQS3 D Q51 164 M_B_D Q52
M_B_DQS5 154 DQS4 D Q52 166 M_B_D Q53 1K_1%_04 0.1u_10V_X5R _04
M_B_DQS6 171 DQS5 D Q53 174 M_B_D Q54
M_B_DQS7 188 DQS6 D Q54 176 M_B_D Q55
DQS7 D Q55 181 M_B_D Q56
4 M_B_DQS#[ 7: 0] M_B_DQS#0 10 D Q56 183 M_B_D Q57
M_B_DQS#1 27 DQS0# D Q57 191 M_B_D Q58
DQS1# D Q58
M_B_DQS#2
M_B_DQS#3
M_B_DQS#4
M_B_DQS#5
M_B_DQS#6
M_B_DQS#7
45
62
135
152
169
186
DQS2#
DQS3#
DQS4#
DQS5#
DQS6#
DQS7#
DD R RK-20401-TP8D
D Q59
D Q60
D Q61
D Q62
D Q63
193
180
182
192
194
M_B_D Q59
M_B_D Q60
M_B_D Q61
M_B_D Q62
M_B_D Q63 h 1.5V
R 66
CLOSE TO SO-DIMM_1
1K_1%_04 MVR EF_D QB R 64 *0_04

MVREF _DQ_DIMMB 6
.c
VTT_MEM R 67 C 122
1K_1%_04 0.1u_10V_X5R _04
C 347 C119 C 107 C351 C354
10u_6.3V_X5R _08 *1u_6.3V_X5R _04 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 1u_6.3V_X5R_04
1.5V
w
C 352 C155 C 346 C100 C118 C 112 C 111 C110
10u_6.3V_X5R _08 10u_6.3V_X5R_08 10u_6.3V_X5R_08 1u_6.3V_X5R _04 1u_6.3V_X5R _04 1u_6.3V_X5R_04 *1u_6.3V_X5R _04 1u_6.3V_X5R _04
Layout Note:
1.5V SO-DIMM_1 is placed farther from the GMCH than SO-DIMM_0
w
C 101 C96 C 97 C98 C99 C 117 C 116 C115 C114 C 113
0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0. 1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0. 1u_16V_Y 5V_04 0.1u_16V_Y 5V_04
w
DDR3 SO-DIMM_1 B - 11
Schematic Diagrams
PANEL, INVERTER, CRT
m
PANEL CONNECTOR (30Pin & 40Pin CO-lay) 3.3VS
PANEL POWER
o
R277 2.2K_04
R276 2.2K_04
VIN_LCD
J_LCD1
1 2 P_DDC_DATA
3 1 2 4 P_DDC_CLK 3.3VS PLVDD
5 3 4 6
.c
7 5 6 8 BRIGHTNESS_R U11
9 7 8 10 2A 4 1 2A
C293
*0.01u_50V_X7R_04
C292
11 9 10 12 INV_BLON 5 VIN VOUT
0.1u_50V_Y5V_06 13 11 12 14 VIN C306
LVDS-LCLKN 15 13 14 16 LVDS-L2N C301
LVDS-LCLKP 17 15 16 18 LVDS-L2P NB_ENAVDD 3 2 *1u_6.3V_X5R_04
19 17 18 20 1u_6.3V_X5R_04 EN GND
LVDS-L1N 21 19 20 22 NCT3522U
LVDS-L1P 23 21 22 24 R280
25 23 24 26 3.3VS
CLOSE TO LVDS CONN. PIN LVDS-L0N 27 25 26 28 100K_04
LVDS-L0P 29 27 28 30
29 30 C295
*87216-3006
x
0.1u_16V_Y 5V_04
VIN_LCD
G1
G2
PLVDD
J_LCD2
P_DDC_DATA C296 C294
Gnd 2
Gnd 1
1 2 P_DDC_DATA 15
P_DDC_CLK
3 4 P_DDC_CLK 15
4.7u_6.3V_X5R_06 0.1u_16V_Y 5V_04
Sheet 11 of 42 5
7
9
6
8
10
BRIGHTNESS_R
INV_BLON
fi
11 12 R9 *10K_04 PJ18 OPEN_2A
PANEL, INVERTER, 15 LVDS-LCLKN

15 LVDS-LCLKP
LVDS-LCLKN
LVDS-LCLKP
13
15
17
14
16
18
LVDS-L2N
LVDS-L2P LVDS-L2N 15
LVDS-L2P 15
R11 *20mil_04
PLVDD
VIN
1 2
8
VIN_LCD
19 20 BRIGHTNESS_R A C C303 C304 3 7
CRT 15 LVDS-L1N 21 22 BRIGHTNESS 28 2 6
AC
15 LVDS-L1P 23 24 3.3VS 1 5
*0.1u_50V_Y5V_06
*0.1u_50V_Y5V_06
25 26 D11 D10 *RB751S-40C2 Q8
15 LVDS-L0N 27 28 PLVDD 2A *P2003EVG
15 LVDS-L0P C305
4
29 30 *BAV99 RECTIFIER 3.3V R279
C
31 32
15 LVDS-UCLKN 33 34 LVDS-U2N 15
a
*220_06
15 LVDS-UCLKP 35 36 LVDS-U2P 15 3.3V
*0.22u_50V_Y 5V_06 R278
15 LVDS-U1N 37 38 LVDS-U0N 15
C298 R282 6
15 LVDS-U1P 39 40 LVDS-U0P 15 D
*0.1u_16V_Y 5V_04 *10K_04
87216-4006 *1M_04 Q9A
¥Î40pin connector®É, -n±N30pin LVDD_EN# 2 G *MTDN7002ZHS6R
R281 *100K_04 3 S
connector¤¤¶¡©T©wpin pad¿ûªO¶K±¼ D Q9B 1
in
5 G *MTDN7002ZHS6R
S
CRT
D
Q10 4
Modify 3/23 J_CRT1 *MTN7002ZHS3
C10556-11505-L G
15,28 NB_ENAVDD
S
DAC_RED L8 *10mil_short_04 L7 FCM1005MF-600T01 FRED 1
15 DAC_RED 9
DAC_GREEN L6 *10mil_short_04 L5 FCM1005MF-600T01 FGRN 2 24 mil
15 DAC_GREEN 10
DAC_BLUE L4 *10mil_short_04 L3 FCM1005MF-600T01 FBLUE 3
15 DAC_BLUE 11
C33 C29 C25 C32 C30 C24 C318 C317 C316 4
12 DDCDATA
*6p_50V_NPO_04
*6p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
5
*6p_50V_NPO_04
R23 R15 R12
h 6
13 HSYNC
150_1%_04
150_1%_04
150_1%_04
14 VSY NC
7
15 DDCLK
8 3.3V
1000p_50V_X7R_04
1000p_50V_X7R_04
3.3V
220p_50V_NPO_04
220p_50V_NPO_04
GND1
GND2
R182 *100K_04 U6A
14
.c
3.3VS 5VS_CRT
74LVC08PW U6B
14
BKL_EN 1 74LVC08PW
28 BKL_EN 3 BLON1 4 3.3V
C34
2 6 BLON2
C31
C308
C307
R286 R285 R283 R24 BLON
15 BLON 5
2.2K_04 2.2K_04 2.2K_04 2.2K_04 R174 100K_04
7
U6C
14
7
U12 74LVC08PW
10 9 DDCDATA 9
15 DAC_DDCADATA DDC_IN1 DDC_OUT1 3.3V 8 INV_BLON
R164 *100K_04
11 12 DDCLK 10
15 DAC_DDCACLK DDC_IN2 DDC_OUT2 U6D
14
13 14 HSY NC_C R16 HSY NC 17 SB_BLON
33_04 74LVC08PW
7
15 DAC_HSY NC SYNC_IN1 SY NC_OUT1 12 R125 C168
15 DAC_VSY NC 23,28 LID_SW#
w
15 16 VSYNC_C R284 33_04 VSY NC 11 LID_SW#1

5VS_CRT SYNC_IN2 SY NC_OUT2 13
*0.1u_16V_Y5V_04
1M_04
1 3 FRED 14,28,29,33 ALL_SYS_PWRGD
5VS R32 *1_04
VCC_SY NC VIDEO_1
7
R35 1_04 A C 2 4 FGRN
D12 RB751S-40C2 VCC_VIDEO VIDEO_2
7 5 FBLUE
3.3VS VCC_DDC VIDEO_3
C315 C319 BY P 8 6
BYP GND
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
TPD7S019
w
C314 ESD+LEVEL SHIFT+BUFFER

0.1u_16V_Y 5V_04
M 6-02-47721-B60
S 6-02-07019-B20
w
B - 12 PANEL, INVERTER, CRT

Schematic Diagrams
PCH 1/9- RTC, HDA, SATA
m
NO REBOOT STRAP
20mils
VDD3 1
D4
BAT54CS3
A
C 3
RTCVCC
C282
20mils
1u_6.3V_X5R_04
PantherPoint - M (HDA,JTAG,SATA) NO REBOOT STRAP: HDA_SPKR High Enable 3.3VS
HDA_SPKR R132 *1K_04
RTC_VBAT_1 2 A C369
R140
20K_1%_04
12p_50V_NPO_04 iTPM ENABLE/DISABLE
TPM FUNCTION:SPI_SI High Enable
R260
6 -2 2- 3 2R 76 -0 B 2 SPI_SI R98 *1K_04
2
1
1K_04 6 -2 2- 3 2R 76 -0 B G R340
J_RTC1 C177 J OPEN1 X2 SERIRQ R163 10K_04
RTC_VBAT 1u_6.3V_X5R_04 *OPEN_10mil-1MM MC-306_32.768KHz 10M_04 U20A
o
1
RTC CLEAR 14" 15"
3
4
1
2 R161 C368 RTC_X1 A20 C38
RTCX1 FWH0 / LAD0 A38 LPC_AD0 22,28
4 /5 c o- l ay 85205-02701 20K_1%_04 12p_50V_NPO_04 R208 X 10K
+
FWH1 / LAD1 LPC_AD1 22,28
LPC
RTC_X2 C20 B37
RTCX2 FWH2 / LAD2 C37 LPC_AD2 22,28
Zo= D20 FWH3 / LAD3 LPC_AD3 22,28 R206 10K X
J _RTC2 3/ 23 R146 C179 RTC_RST#
RTCRST# D36
*BAT-KB7410AP2P 50£[¡Ó15% G22 FWH4 / LFRAME# LPC_FRAME# 22,28 3.3VS
SRTC_RTC#
-
1M_04 1u_6.3V_X5R_04
PCB F ootprint = BAT-KB7410AP2P SRTCRST# E36
2
K22 LDRQ0# K36
RTC
SM_INTRUDER# Board ID R208 *10K_04
INTRUDER# LDRQ1# / GPIO23 R206 10K_04
.c
R147 330K_04 PCH_INTVRMEN C17 V5 SERIRQ
RTCVCC INTVRMEN SERIRQ SERIRQ 22,28
IN TVR MEN - In teg r ate d S US 1 .05 V V R M E nab l e
Hi gh - E n abl e I n ter nal V Rs /L ow - En abl e Ex ter nal V Rs AM3 SATA_RXN0
HDA_BITCLK_R N34 SATA0RXN AM1 SATA_RXP0
HDA_BCLK SATA0RXP AP7 SATA HDD
SATA 6G
C211 22p_50V_NPO_04 SATA_TXN0
R193 1K_04 HDA_SY NC_R L34 SATA0TXN AP5 SATA_TXP0
3.3A_1.5A_HDA_IO HDA_SY NC SATA0TXP
R351 33_04 HDA_SDOUT_R
27 HDA_SDOUT T10 AM10
PLL OD V R V OLT AG E: HD A_S YN C
HDA_BITCLK_R 27 HDA_SPKR SPKR SATA1RXN AM8
R201 33_04 LOW -1. 8 V (DE FA UL T) HI GH -1 5V
27 HDA_BITCLK K34 SATA1RXP AP11
S D HDA_SY NC_R 3.3A_1.5A_HDA_IO 27 HDA_RST# HDA_RST# SATA1TXN AP10
R184 33_04
27 HDA_SY NC 1 2 SATA1TXP
R337 *1K_04
R177 1M_04 Q4 JOPEN2 E34 AD7
SATA_RXN2 25
2SK3018S3 Fla sh D esc rip to r *OPEN_10mil-1MM 27 HDA_SDIN0 HDA_SDIN0 SATA2RXN AD5
SATA ODD
G
G34 SATA2RXP AH5 SATA_RXP2 25

3.3VS R160 *0_04 Sec uri t y O ver id e SATA_TXN2 25
HDA_SDIN1 SATA2TXN AH4
Low = D isa ble d- (D efa ult )
C34 SATA2TXP SATA_TXP2 25
5VS R152 0_04
Layout Note:
x
Hig h = Ena ble d HDA_SDIN2 AB8
IHDA
Sheet 12 of 42
A34 SATA3RXN AB10
Close to PCH HDA_SDIN3 SATA3RXP
R344 *10mil_short_04 AF 3
28 ME_W E D15 RB751S-40C2 SATA3TXN AF 1
R346 *910_04 A C HDA_SDOUT_R A36 SATA3TXP
3/ 23 HDA_SDO Y7
SATA
PCH 1/9- RTC, HDA,
SATA4RXN Y5 SATA_RXN4 21
LED_IGPU# C36
HDA_DOCK_EN# / GPIO33
SATA4RXP
SATA4TXN
AD3
AD1
SATA_RXP4 21
SATA_TXN4 21
3G/M SATA
N32 SATA4TXP SATA_TXP4 21
3.3V R183 10K_04
HDA_DOCK_RST# / GPIO13
fi
Y3
Layout Note: 3.3V

PCH_JTAG_TCK_BUF J3
JTAG_TCK
SATA5RXN
SATA5RXP
SATA5TXN
SATA5TXP
Y1
AB3
AB1
1.05VS
SATA
PCH_JTAG_TMS H7 Y 11 SATAICOMP R175 37.4_1%_04
JTAG_TMS SATAICOMPO
JTAG
3.3VS R322 R117 R110
*210_1%_04 *210_1%_04 *210_1%_04 PCH_JTAG_TDI K5 Y 10
JTAG_TDI SATAICOMPI
PCH_JTAG_TDO H1 1.05VS
PCH_JTAG_TMS JTAG_TDO AB12 SATA3COMP R188 49.9_1%_04
C212 C217 C207 PCH_JTAG_TDI SATA3RCOMPO
PCH_JTAG_TDO AB13
SATA3COMPI
*0.01u_16V_X7R_04
*1u_6.3V_X5R_04
*0.1u_16V_Y5V_04
PCH_JTAG_TCK_BUF
a
SPI_SCLK R99 *33_04 SPI_SCLK_R T3 AH1 RBIAS_SATA3 R347 750_1%_04
R327 R135 R121 R324 SPI_CLK SATA3RBIAS 3.3VS
*51_04 SPI_CS0# R97 *0_04 SPI_CS_0# Y 14
*100_1%_04 *100_1%_04 *100_1%_04 SPI_CS0# R333 *10K_04
R92 *0_04 SPI_CS_1# T1
SPI
SPI_CS1# P3 SATA_LED#
SATALED# SATA_LED# 25
SPI_SI R104 *33_04 SPI_SI_R V4 V14 ODD_DETECT#
SPI_MOSI SATA0GP / GPIO21 ODD_DETECT# 17
SPI_SO R107 *33_04 SPI_SO_R U3 P1 BBS_BIT0 R338 *1K_04
SPI_MISO SATA1GP / GPIO19
in
J_HDD1
SATA HDD PANTHER POINT HM77 MP
S1
B B S _B IT 0 - BIOS B OO T S TR A P BIT 0
S2 SATA_TXP0_R C407 0.01u_16V_X7R_04 SATA_TXP0
S3 SATA_TXN0_R C402 0.01u_16V_X7R_04 SATA_TXN0
S4
S5 SATA_RXN0_R C394 0.01u_16V_X7R_04 SATA_RXN0
S6 SATA_RXP0_R C393 0.01u_16V_X7R_04 SATA_RXP0
S7
Share ROM 3.3VS
3.3VS R113 33_04 SPI_SI_R
28 HSPI_MSI
R102 33_04 SPI_SO_R SPI_* = 1.5"~6.5"
P1 28 HSPI_MSO
R109 33_04 SPI_SCLK_R NC3
P2 28 HSPI_SCLK
R89 0_04 SPI_CS_0#
P3
P4
28 HSPI_CE#
R87 *0_04 SPI_CS_1# SHORT
C365 *0.1u_16V_Y 5V_04
ME ROM
P5
P6 U19
16Mbit
P7
P8
P9
P10
P11 HDD_NC0 C376 C375 + C367
5VS
h R93
SPI_VDD
*3.3K_1%_04
SPI_WP#
8
3
VDD
SO
SI
5
1
SPI_SI
SPI_SO
SPI_CS0#
*2.2u_6.3V_X5R_06
WP# CE#
220u_6.3V_6.3*6.3*4.2
P12
*0.1u_16V_Y5V_04
P13 HDD_NC1 R312 6 SPI_SCLK

P14 HDD_NC2 *3.3K_1%_04 SCK
P15 HDD_NC3 SPI_HOLD# 7 4
GND1 HOLD# VSS
*PCT25VF016B-75-4I-S2AF
GND2
.c
C166W9-12205-L
P IN G ND1~2 =G ND
M o di fy 1 / 9
w
w
w
PCH 1/9- RTC, HDA, SATA B - 13

Schematic Diagrams
PCH 2/9- PCIE, SMBUS, CLK
m
RN2 3.3V
2.2K_8P4R_04
PantherPoint - M (PCI-E,SMBUS,CLK) SMB_DATA

SML0_CLK
SMB_CLK
8
7
6
1
2
3
SML0_DATA 5 4
U20B RN3
10K_8P4R_04
o
BG34 PEG_PCIECLKRQ7# 8 1
BJ34 PERN1 E12 BT_SBD# BT_SBD# 7 2
AV32 PERP1 SMBALERT# / GPIO11 BT_SBD# 21 6 3
LPD_SPI_INTR#
AU32 PETN1 H14 SMB_CLK USB_OC#89 5 4
PETP1 SMBCLK SMB_CLK 9,10 16,25 USB_OC#89
BE34 C9 SMB_DATA SMD_CPU_THERM R134 2.2K_04
BF34 PERN2 SMBDATA SMB_DATA 9,10
SMC_CPU_THERM R123 2.2K_04
BB32 PERP2 DRAMRST_CNTRL R319 1K_04
PETN2
.c
AY32
PETP2 A12
SMBUS
DRAMRST_CNTRL
BG36 SML0ALERT# / GPIO60 DRAMRST_CNTRL 3,6
RN1
21 PCIE_RXN3_WLAN BJ36 PERN3 C8 SML0_CLK 10K_8P4R_04
21 PCIE_RXP3_WLAN PCIE_TXN3_C AV34 PERP3 SML0CLK PCIECLKRQ6# 8 1
C265 0.1u_10V_X7R_04
21 PCIE_TXN3_WLAN PCIE_TXP3_C AU34 PETN3 G12 SML0_DATA 7 2
C267 0.1u_10V_X7R_04
21 PCIE_TXP3_WLAN PETP3 SML0DATA PCIECLKRQ5# 6 3
BF36 PCIECLKRQ0# 5 4
24 PCIE_RXN4_GLAN BE36 PERN4
24 PCIE_RXP4_GLAN PCIE_TXN4_C AY34 PERP4 C13 LPD_SPI_INTR# DGPU_PRSNT#
C254 0.1u_10V_X7R_04 R362 10K_04
24 PCIE_TXN4_GLAN PCIE_TXP4_C BB34 PETN4 SML1ALERT# / PCHHOT# / GPIO74

C259 0.1u_10V_X7R_04
24 PCIE_TXP4_GLAN PETP4 E14 SMC_CPU_THERM PEG_CLKREQ# R115 *10K_04
SML1CLK / GPIO58 SMC_CPU_THERM 28
PCI-E*
BG37
PERN5
x
BH37 M16 SMD_CPU_THERM
SMD_CPU_THERM 28
Sheet 13 of 42 PCI-E x1 Usage
AY36
BB36
PERP5
PETN5
PETP5
SML1DATA / GPIO75
BJ38
PCH 2/9- PCIE, BG38

AU36
PERN6
PERP6 M7
Controller
Lane 1 X CL_CLK1
AV36 PETN6 CL_CLK1 CL_CLK1 21 3.3VS
fi
Lane 2 X PETP6
SMBUS, CLK BG40 T11
Link
CL_DATA1 PCIECLKRQ1# R334 10K_04
Lane 3 WLAN BJ40 PERN7 CL_DATA1 CL_DATA1 21
PCIECLKRQ2# R129 10K_04
Lane 4 GLAN / CARD READER AY40 PERP7
BB40 PETN7 P10 CL_RST#1
Lane 5 X PETP7 CL_RST1# CL_RST#1 21
Lane 6 X BE38
BC38 PERN8
Lane 7 X AW38 PERP8 RN8
AY38 PETN8 10K_8P4R_04
Lane 8 X PETP8
a
CLK_BUF_CPYCLK_P 8 1
M10 PEG_CLKREQ# CLK_BUF_CPYCLK_N 7 2
Y40 PEG_A_CLKRQ# / GPIO47 CLK_PCIE_ICH_N 6 3
Y39 CLKOUT_PCIE0N CLK_PCIE_ICH_P 5 4
CLKOUT_PCIE0P AB37 VGA_PEXCLK#
J2 CLKOUT_PEG_A_N AB38
CLOCKS
PCIECLKRQ0# VGA_PEXCLK
PCIECLKRQ0# / GPIO73 CLKOUT_PEG_A_P
100MHz
in
AB49 AV22
AB47 CLKOUT_PCIE1N CLKOUT_DMI_N AU22 CLK_EXP_N 3
CLKOUT_PCIE1P CLKOUT_DMI_P CLK_EXP_P 3
CLK_BUF_CKSSCD_P R180 10K_04
PCIECLKRQ1# M1 CLK_BUF_CKSSCD_N R173 10K_04
PCIECLKRQ1# / GPIO18 AM12 PCH_CLK_DP_N_R R200
120MHz
*10mil_short_04 CLK_BUF_DOT96_P R170 10K_04
CLKOUT_DP_N AM13 CLK_DP_N 3
PCH_CLK_DP_P_R R207 *10mil_short_04 CLK_BUF_DOT96_N R187 10K_04
AA48 CLKOUT_DP_P CLK_DP_P 3
AA47 CLKOUT_PCIE2N
CLKOUT_PCIE2P BF18 CLK_PCIE_ICH_N CLK_BUF_REF14 R234 10K_04
PCIECLKRQ2# V10 CLKIN_DMI_N BE18 CLK_PCIE_ICH_P PEG_CLKREQ# R131 *10K_04
PCIECLKRQ2# / GPIO20 CLKIN_DMI_P LAN_CLKREQ# R118 *10K_04
100MHz CLK_PCIE_WLAN# Y37 BJ30 CLK_BUF_CPYCLK_N
21 CLK_PCIE_WLAN# CLKOUT_PCIE3N CLKIN_GND1_N
21 CLK_PCIE_WLAN
21 WLAN_CLKREQ#
24 CLK_PCIE_GLAN#
24 CLK_PCIE_GLAN
100MHz
CLK_PCIE_WLAN
CLK_PCIE_GLAN#
CLK_PCIE_GLAN
h Y36
A8
Y43
Y45
L12
CLKOUT_PCIE3P
PCIECLKRQ3# / GPIO25
CLKOUT_PCIE4N
CLKOUT_PCIE4P
CLKIN_GND1_P
CLKIN_DOT_96N
CLKIN_DOT_96P
CLKIN_SATA_N
BG30
G24
E24
AK7
AK5
CLK_BUF_CPYCLK_P
CLK_BUF_DOT96_N
CLK_BUF_DOT96_P
CLK_BUF_CKSSCD_N
6-22-25R00-1BV
6-22-25R00-1B4
6-22-25R00-1B5
C391 22p_50V_NPO_04
.c
LAN_CLKREQ# CLK_BUF_CKSSCD_P
16,24 LAN_CLKREQ# PCIECLKRQ4# / GPIO26 CLKIN_SATA_P
V45 K45 CLK_BUF_REF14
1
V46 CLKOUT_PCIE5N REFCLK14IN
CLKOUT_PCIE5P R373 X3
PCIECLKRQ5# L14 H45 33MHz
PCIECLKRQ5# / GPIO44 CLKIN_PCILOOPBACK CLK_PCI_FB 16 FSX5L_25MHZ
1M_04
2
AB42 V47 XTAL25_IN
AB40 CLKOUT_PEG_B_N XTAL25_IN V49 XTAL25_OUT
CLKOUT_PEG_B_P XTAL25_OUT C389 22p_50V_NPO_04
PEG_B_CLKRQ# E6
16 PEG_B_CLKRQ# PEG_B_CLKRQ# / GPIO56
w
Y47 XCLK_RCOMP R378 90.9_1%_04

V40 XCLK_RCOMP 1.05VS
V42 CLKOUT_PCIE6N
CLKOUT_PCIE6P 90.9-£[ ¡Ó1% pullup to
PCIECLKRQ6# T13
PCIECLKRQ6# / GPIO45 +VccIO
V38 K43 PCH_XTAL_IN (1.05V, S0 rail)close to
V37 CLKOUT_PCIE7N CLKOUTFLEX0 / GPIO64
FLEX CLOCKS
CLKOUT_PCIE7P PCH
F47 PCH_GPIO65 R215 *22_04
CLKOUTFLEX1 / GPIO65 FLEX_GLAN_CLK 24
w
PEG_PCIECLKRQ7# K12
PCIECLKRQ7# / GPIO46 H47 PCH_GPIO66 R361 *10mil_short_04
CLK_XDP_N AK14 CLKOUTFLEX2 / GPIO66
CLK_XDP_P AK13 CLKOUT_ITPXDP_N K49 DGPU_PRSNT#
CLKOUT_ITPXDP_P CLKOUTFLEX3 / GPIO67
3/23 TI USB3.0 unused crystal
PANTHER POINT HM77 MP and used PCH clock output
w
B - 14 PCH 2/9- PCIE, SMBUS, CLK

Schematic Diagrams
PCH 3/9- DMI, FDI, PWRGD
m
PantherPoint -M (DMI,FDI,GPIO)
o
U20C
3.3V
BC24 BJ14
2 DMI_RXN0 BE20 DMI0RXN FDI_RXN0 AY 14 FDI_TXN0 2
2 DMI_RXN1 BG18 DMI1RXN FDI_RXN1 BE14 FDI_TXN1 2
AC_PRESENT R149 10K_04
2 DMI_RXN2 BG20 DMI2RXN FDI_RXN2 BH13 FDI_TXN2 2
PM_SLP_LAN# R119 * 10K_04
2 DMI_RXN3 DMI3RXN FDI_RXN3 BC12 FDI_TXN3 2
SWI# R313 10K_04
BE24 FDI_RXN4 BJ12 FDI_TXN4 2
SUS_PWR_ACK R130 10K_04
.c
2 DMI_RXP0 BC20 DMI0RXP FDI_RXN5 BG10 FDI_TXN5 2
2 DMI_RXP1 BJ18 DMI1RXP FDI_RXN6 BG9 FDI_TXN6 2
2 DMI_RXP2 BJ20 DMI2RXP FDI_RXN7 FDI_TXN7 2
PCIE_WAKE# R315 1K_04
2 DMI_RXP3 DMI3RXP BG14 PWR_BTN# R158 * 10K_04
AW24 FDI_RXP0 BB14 FDI_TXP0 2
PM_BATLOW# R116 8.2K_04
2 DMI_TXN0 AW20 DMI0TXN FDI_RXP1 BF14 FDI_TXP1 2
2 DMI_TXN1 BB18 DMI1TXN FDI_RXP2 BG13 FDI_TXP2 2
2 DMI_TXN2 AV18 DMI2TXN FDI_RXP3 BE12 FDI_TXP3 2
2 DMI_TXN3 DMI3TXN FDI_RXP4 FDI_TXP4 2
FDI
BG12 3.3VS
DMI
AY 24 FDI_RXP5 BJ10 FDI_TXP5 2
2 DMI_TXP0 AY 20 DMI0TXP FDI_RXP6 BH9 FDI_TXP6 2
PM_CLKRUN#
FDI_TXP7 2 R336 8.2K_04
2 DMI_TXP1 AY 18 DMI1TXP FDI_RXP7
2 DMI_TXP2 AU18 DMI2TXP
2 DMI_TXP3 DMI3TXP AW16
x
FDI_INT FDI_INT 2
1.05VS R254 49.9_1%_04 DMI_COMP_R BJ24
BG25
DMI_ZCOMP FDI_FSY NC0
AV12
BC10
FDI_FSY NC0 2
RTCVCC
Sheet 14 of 42
FDI_FSY NC1 2
R252 750_1%_04 DMI_2RBIAS BH21
DMI_IRCOMP
DMI2RBIAS
FDI_FSY NC1
FDI_LSY NC0
AV14
FDI_LSY NC0 2
DSWODVREN R318 330K_04 PCH 3/9- DMI, FDI,
fi
BB10 R321 * 330K_04
FDI_LSY NC1 FDI_LSY NC1 2
ALL_SY S_PWRGD R257 10K_04

PWRGD
A18 DSWODVREN
DSWVRMEN
System Power Management

SUS_PWR_ACK C12 E22 R172 *10mil_short RSMRST#
SUSACK# DPWROK
28 SY S_RESET#
SY S_RESET# K3 B9 PCIE_WAKE#
DSWODVREN - On Die DSW VR Enable
3.3VS R330 10K_04 PCIE_WAKE# 21,24
SY S_RESET# WAKE#
a
P12 N3
R318 Enabled (DEFAULT)
C248 *0.1u_10V_X5R_04 SY S_PWROK PM_CLKRUN#
SY S_PWROK CLKRUN# / GPIO32 PM_CLKRUN# 22
R321 Disabled
R243 *10mil_short PM_PCH_PWROK_R L22 G8 S4_STATE#
28 PM_PCH_PWROK PWROK SUS_STAT# / GPIO61 S4_STATE# 22
R244 *10mil_short PM_MPWROK L10 N14 SUSCLK
in
APWROK SUSCLK / GPIO62
3/23
B13 D10 SLP_S5#
3,29 PM_DRAM_PWRGD DRAMPWROK SLP_S5# / GPIO63
RSMRST# C21 H4
28 RSMRST# RSMRST# SLP_S4# SUSC# 28,32
R176 10K_04
R142 *10mil_short SUS_PWRACK K16 F4

28 SUS_PWR_ACK SUSWARN#/SUSPWRDNACK/GPIO30 SLP_S3# SUSB# 6,28,29
PWR_BTN# E20 G10 SLP_A#

28 PWR_BTN# PWRBTN# SLP_A#
16,28 AC_PRESENT
28 SWI#
AC_PRESENT
PM_BATLOW#
SWI#
H20
E10
A10
ACPRESENT / GPIO31
BATLOW# / GPIO72
RI#
SLP_SUS#
PMSY NCH
SLP_LAN# / GPIO29
G16
AP14
K14
h
SLP_SUS#
PM_SLP_LAN#
H_PM_SY NC 3,29
.c
PANTHER POINT HM77 MP 3.3V
From EC pin119
R233 *0_04
28 VCORE_PWRGD
C225
R232 * 10mil_short
29,33 DELAY _PWRGD
*0.1u_10V_X5R_04
3/23
3.3V C226
31 0.85VS_PWRGD
*1u_6.3V_Y 5V_04 R240
U9D
14
74LVC08PW 3/23 *0_04

w
14
3.3V 3.3V 12
11 R255 *10mil_short 9
13 ALL_SY S_PWRGD 11,28,29,33 8 SY S_PWROK
U9A
74LVC08PW C257 C256 10
14
28 PM_PCH_PWROK
14
4 R473 *1u_6.3V_X5R_04 U9C
7
1 29,31 1.8VS_PWRGD 6 1.05VS_VTT_EN *10mil_short 0.85VS_EN *1u_6.3V_X5R_04 74LVC08PW
32 DDR1.5V_PWRGD 3/23
3 DDR_1.05VS_PWRGD 5
2
32 1.05VS_PWRGD
U9B
w
7
74LVC08PW 3/23 0.85VS_EN 31

7
ON
w
PCH 3/9- DMI, FDI, PWRGD B - 15

Schematic Diagrams
PCH 4/9- LVDS, DDI, CRT
m
o
PantherPoint -M (LVDS,DDI)
.c
U20D
J47 AP43
x
11 BLON M45 L_BKLTEN SD VO_TVCLKIN N AP45
Sheet 15 of 42 11,28 NB_EN AVDD

P45
L_VD D_EN
L_BKLTCTL
SDVO_TVC LKINP
SD VO_STALLN
AM42
AM40
SDVO_STALLP
PCH 4/9- LVDS, 3.3VS
Ver:1.0
pull up 2.2K
11 P_DDC _CLK
11 P_DDC _DATA
T40
K47
T45
L_D DC _C LK
L_D DC _D ATA SDVO_IN TN
SDVO_INTP
AP39
AP40
L_C TR L_C LK
fi
R238 2.2K_04
DDI, CRT R231
R248
2.2K_04
2.37K_1%_04
L_C TR L_D ATA
LVDS_IBG
P39
AF37
L_C TR L_C LK
L_C TR L_D ATA
P38
AF36 LVD_IBG SDVO_C TRLCLK M39
LVD_VBG SDVO_C TRLDATA
AE48
AE47 LVD_VREFH AT49
LVD_VREFL DDPB_AU XN AT47
DD PB_AUXP AT40 3.3VS
SDVO
Display Port B
AK39 D DPB_H PD
a
11 LVDS-LCLKN AK40 LVDSA_CLK# AV42
LVDS
11 LVDS-LCLKP LVDSA_CLK D DPB_0N AV40
AN48 D DPB_0P AV45
11 LVDS-L0N AM47 LVDSA_DATA#0 D DPB_1N AV46
Digital Display Interface

11 LVDS-L1N AK47 LVDSA_DATA#1 D DPB_1P AU 48
11 LVDS-L2N AJ48 LVDSA_DATA#2 D DPB_2N AU 47 R 249 R 247
LVDSA_DATA#3 D DPB_2P AV47
D DPB_3N 2.2K_04 2.2K_04
AN47 AV49
11 LVDS-L0P
in
AM49 LVDSA_DATA0 D DPB_3P
11 LVDS-L1P AK49 LVDSA_DATA1
11 LVDS-L2P AJ47 LVDSA_DATA2 P46
LVDSA_DATA3 D DPC _C TRLCLK P42 H DMI_C TRLCLK 26
D DPC _C TRLDATA H DMI_C TRLDATA 26
AF40
11 LVDS-U CLKN AF39 LVDSB_CLK# AP47
11 LVDS-U CLKP LVDSB_CLK D DPC _AU XN AP49
AH45 DDPC_AUXP AT38 H DMI_H PD
Display Port C
11 LVDS-U 0N AH47 LVDSB_DATA#0 DD PC_H PD HD MI_HPD 26
11 LVDS-U 1N AF49 LVDSB_DATA#1 AY 47 H DMIC _C0CN
11 LVDS-U 2N AF45 LVDSB_DATA#2 DD PC_0N AY 49 H DMIC _C0CP HD MIC_C 0C N 26
LVDSB_DATA#3 D DPC _0P AY 43 H DMIC _C1CN HD MIC_C 0C P 26
DD PC_1N HD MIC_C 1C N 26
11
11
DAC _BLU E
DAC _GREEN
C381 *33p_50V_N PO_04
h
DAC _BLU E
DAC _GREEN
11 LVDS-U 0P
11 LVDS-U 1P
11 LVDS-U 2P
R367 150_1%_04 DAC _BLU E

AH43
AH49
AF47
AF43
N48
LVDSB_DATA0
LVDSB_DATA1
LVDSB_DATA2
LVDSB_DATA3
CR T_BLUE
D DPC _1P
DD PC_2N
D DPC _2P
DD PC_3N
D DPC _3P
D DPD _C TRLCLK
AY 45
BA47
BA48
BB47
BB49
M43
H DMIC _C1CP
H DMIC _C2CN
H DMIC _C2CP
H DMIC _CLKCN
H DMIC _CLKCP
HD MIC_C 1C P 26
HD MIC_C 2C N 26
HD MIC_C 2C P 26
HD MIC_C LKCN 26
HD MIC_C LKCP 26
.c
C387 *33p_50V_N PO_04 R370 150_1%_04 DAC _GREEN P49 M36
R371 150_1%_04 DAC _R ED T49 CR T_GREEN D DPD _C TRLDATA
D AC_R ED CR T_R ED
11 DAC _RED AT45
C388 *33p_50V_N PO_04
T39 D DPD _AU XN AT43
CRT
EMI NEAR PCH 11 D AC_DD CAC LK M40 CR T_D DC_C LK DDPD_AUXP BH 41
Display Port D
11 D AC_DD CAD ATA CR T_D DC_D ATA DD PD_H PD
BB43
M47 DD PD_0N BB45
11 D AC_HSY NC M49 CR T_H SY N C D DPD _0P BF 44
11 D AC_VSY NC CR T_VSY NC DD PD_1N BE44
D DPD _1P BF 42
R246 1K_1%_04 DAC _IR EF_R T43 DD PD_2N BE42
T42 DAC _IR EF D DPD _2P BJ42
w
CR T_IR TN DD PD_3N BG42

D DPD _3P
PAN TH ER POINT H M77 MP
Connect to GND
w
w
B - 16 PCH 4/9- LVDS, DDI, CRT

Schematic Diagrams
PCH 5/9- PCI, USB, RSVD
m
PantherPoint -M (PCI,USB,NVRAM) 3.3V
R N10 10K_8P4R_04
PEG_B_C LKR Q# 5 4
o
13 PEG_B_CLKRQ# USB_OC#23 6 3
U 20E USB_OC#14 7 2
Boot BIOS Strap AY 7 USB_OC#01 8 1
RSVD1 AV7
BG26 RSVD2 AU3
BBS_BIT1 BBS_BIT0 Boot BIOS Location TP1 RSVD3
BJ26 BG4 R N11 10K_8P4R_04
BH 25 TP2 RSVD4 USB_OC#1213 5 4
BJ16 TP3 AT10 USB_OC#67 6 3
0 0 LPC TP4 RSVD5
.c
BG16 BC8 USB_OC#1011 7 2
0 1 Reserved (NAND) AH 38 TP5 RSVD6 USB_OC#45 8 1
AH 37 TP6 AU2
1 0 PCI AK43 TP7 RSVD7 AT4
AK45 TP8 RSVD8 AT3 LAN _C LKR EQ# R103 * 10K_04
1 1 SPI TP9 RSVD9 13,24 LAN_CLKREQ#
C 18 AT1
N 30 TP10 RSVD 10 AY 3
H3 TP11 RSVD 11 AT5
R 219 * 1K_04 BBS_BIT1 AH 12 TP12 RSVD 12 AV3
AM4 TP13 RSVD 13 AV1 3.3VS
AM5 TP14 RSVD 14 BB1 R N6 10K_8P4R_04
Y 13 TP15 RSVD 15 BA3 INT_PIR QD# 4 5
K24 TP16 RSVD 16 BB5 SATA_OD D_DA# 3 6
L24 TP17 RSVD 17 BB3 INT_PIR QA# 2 7
x
AB46 TP18 RSVD 18 BB7 IN T_PIRQE# 1 8
AB45 TP19 RSVD 19 BE8
Flash Descriptor security override strap TP20 RSVD 20 BD4
RSVD
RSVD 21 BF6 R N12 10K_8P4R_04
RSVD 22 DGPU _H OLD_RST# 4 5
LOW = PCI_GNT#3 swap override
PCI_GNT#3
HIGH = Default
B21
M20
AY 16
TP21
TP22
RSVD 23
RSVD 24
AV5
AV10 17,28 SMI#
SMI#
D_GPU_PWR_EN#
3
2
1
6
7
8
Sheet 16 of 42
fi
BG46 TP23 AT8
USB PORT1
USB PORT2 TP24 RSVD 25
RSVD 26
AY 5
BA2 INT_PIRQG# 4
R N7 10K_8P4R_04
5
PCH 5/9- PCI, USB,
BE28 RSVD 27 3 6
Understand the RED FONT define
R213 *1K_04 PCI_GN T#3

23 U SB3_RX1N
23 U SB3_RX2N
BC 30
BE32
BJ32
USB3Rn1
USB3Rn2
USB3Rn3
RSVD 28
RSVD 29
AT12
BF3
INT_PIR QB#
INT_PIR QH#
DGPU _SELECT#
2
1
7
8 RSVD
BC 28 USB3Rn4
23 U SB3_RX1P BE30 USB3Rp1
23 U SB3_RX2P BF32 USB3Rp2
a
BG32 USB3Rp3 C24
AV26 USB3Rp4 USBP0N A24 USB_PN0 23
23 U SB3_TX1N BB26 USB3Tn1 USBP0P C25 USB_PP0 23 USB PORT0
23 U SB3_TX2N AU 28 USB3Tn2 USBP1N B25 USB_PN1 25
R199 *1K_04 IN T_PIRQE# USB PORT1 USB1 Port For Debug.
AY 30 USB3Tn3 USBP1P C26 USB_PP1 25
AU 26 USB3Tn4 USBP2N A26 USB_PN2 21
23 U SB3_TX1P AY 26 USB3Tp1 USBP2P K28 USB_PP2 21 3G
MPC Switch Control 23 U SB3_TX2P AV28 USB3Tp2 USBP3N H28 USB_PN3 21
MPC OFF -- 0 DEFAULT USB3Tp3 USBP3P USB_PP3 21 WLAN
in
AW30 E28
USB3Tp4 USBP4N D28
MPC ON -- 1 USBP4P C28
USBP5N A28
USBP5P C29
USBP6N B29
INT_PIR QA# K40 USBP6P N28
INT_PIR QB# K38 PIRQA# USBP7N M28
H 38 PIRQB# USBP7P L30
PCI
INT_PIR QC# CCD
17 INT_PIR QC# G38 PIRQC # USBP8N K30 USB_PN8 22
INT_PIR QD#
PIRQD # USBP8P G30 USB_PP8 22
C 46 USBP9N E30 USB_PN9 25
DGPU _H OLD_RST# USB PORT3 USB9 Port For Debug.
C 44 REQ1# / GPIO50 USBP9P C30 USB_PP9 25
USB
DGPU _SELECT#
E40 REQ2# / GPIO52 USBP10N A30 USB_PN10 25
D_GPU_PWR_EN# USB PORT4
25 SATA_ODD_DA#
BBS_BIT1
PCI_GNT#3
INT_PIR QE#
SATA_OD D_DA#
D 47
D_GPU_PWM_SELECT# E42
F46
G42
G40
C 42
h
REQ3# / GPIO54
GN T1# / GPIO51
GN T2# / GPIO53
GN T3# / GPIO55
PIRQE# /
PIRQF# /
GPIO2
GPIO3
U SBP10P
USBP11N
U SBP11P
USBP12N
U SBP12P
USBP13N
U SBP13P
L32
K32
G32
E32
C32
A32
C33
USB_PP10 25
3/28
.c
INT_PIR QG# USB_BIAS R348 22.6_1%_06
INT_PIR QH# D 44 PIRQG# / GPIO4 USBRBIAS#
PIRQH # / GPIO5
B33
R114 * 0_04 K10 U SBRBIAS
28 PME# PME#
PLT_RST# C6 A14 USB_OC #01
3,22 PLT_RST# PLTRST# OC0# / GPIO59 K20 USB_OC#01 23,25
USB_OC #23
R229 for TPM OC1# / GPIO40 B17 USB_OC #45
H 49 OC2# / GPIO41 C16 USB_OC #67
3/23 CLKOUT_PCI0 OC3# / GPIO42
R229 22_04 PCLK_TPM_PCH H 43 L16 USB_OC #89
22 PC LK_TPM J48 CLKOUT_PCI1 OC4# / GPIO43 A16 USB_OC#89 13,25
R224 22_04 CLK_PC I_FB_R USB_OC #1011
13 C LK_PCI_FB K42 CLKOUT_PCI2 OC5# / GPIO9 D14 USB_OC #1213
R223 22_04 CLK_PC I_KBC _R H 40 CLKOUT_PCI3 OC6# / GPIO10 C14 USB_OC #14 R138 *0_04
28 PC LK_KBC
w
CLKOUT_PCI4 OC7# / GPIO14 AC_PRESENT 14,28
PAN THER POINT HM77 MP
3.3VS
PIN PLT_RST# to Buffer
C380 *0.1u_16V_Y 5V_04
5
U22
PLT_RST# 1 MC 74VHC 1G08DFT2G
w
4
2 BU F_PLT_RST# 21,24,28
R368
3
100K_04
w
PCH 5/9- PCI, USB, RSVD B - 17

Schematic Diagrams
PCH 6/9- GPIO, CPU
m
3.3V PantherPoint - M (GPIO,VSS_NCTF,RSVD)
o
R320 1K_04 HOST_ALERT#1
R108 1K_04 HOST_ALERT#2
3.3VS
.c
R323 *10K_04 LED_DGPU# U20F
R353 *10K_04 DGPU_PWROK
R356 1K_04 SATA_ODD_PWRGT S_GPIO T7 C40 SATA_ODD_PWRGT
MFG_MODE BMBUSY# / GPIO0 TACH4 / GPIO68 SATA_ODD_PWRGT 25
R329 10K_04
R343 10K_04 SATA_DET#4 SMI# A42 B41 PCH_GPIO57 R359 1.5K_1%_04
16,28 SMI# TACH1 / GPIO1 TACH5 / GPIO69
RN5 DGPU_HPD_INTR# H36 C41 GPIO70 R198 100K_04
TACH2 / GPIO6 TACH6 / GPIO70 3.3VS
10K_8P4R_04
1 8 KBC_RST# SCI# E38 A40 GPIO71 R349 100K_04

2 7 28 SCI# TACH3 / GPIO7 TACH7 / GPIO71 3.3VS
DGPU_HPD_INTR#
3 6 SCI# ICC_EN# C10
4 5 INT_PIRQC# GPIO8
x
SATA_ODD_PRSNT# INT_PIRQC# 16 EDID_SELECT# C4
R171 200K_04 3.3V R314 10K_04 R137 10K_04 3.3VS
LAN_PHY_PWR_CTRL / GPIO12
G2 P4 GA20 28
RN4 HOST_ALERT#1
10K_8P4R_04 GPIO15 A20GATE R235 *10K_04 1.05VS
Sheet 17 of 42 1
2
3
8
7
6
CRIT_TEMP_REP#_R
TEST_SET_UP ODD_DETECT# 12
SATA_DET#4 U2
SATA4GP / GPIO16
PECI
RCIN#
AU16
P5
HPECI_R
KBC_RST#
R239 *0_04 H_PECI 3,28,29
KBC_RST# 28
fi
4 5 S_GPIO
PCH 6/9- GPIO, D40 AY11 H_CPUPWRGD 3,29
GPIO
DGPU_PWROK
TACH0 / GPIO17 PROCPWRGD
CPU/MISC
R202 *100K_1%_04
R148 *10mil_short_04 PCH_TS_VSS1 BIOS_REC T5 AY10 HTHRMTRIP#_R R212 390_1%_06
SCLOCK / GPIO22 THRMTRIP# H_THRMTRIP# 3
CPU R197
R153
R165
*10mil_short_04 PCH_TS_VSS2
HOST_ALERT#2 E8
GPIO24 INIT3_3V#
T14 INIT3_3V#
R350 2.2K_04 1.8VS
SB_BLON E16 AY1 NV_CLE R358 1K_04
PLL_ODVR_EN 11 SB_BLON GPIO27 DF_TVS H_SNB_IVB# 3,29
R128 *1K_04
R122 100K_04 FDI_OVRVLTG PLL_ODVR_EN P8
GPIO28
a
AH8 PCH_TS_VSS1 DMI & FDI Termination Voltage
LED_DGPU# K1 TS_VSS1
PLL_ODVR_EN:HIGH- ENABLED[DEFAULT] STP_PCI# / GPIO34 AK11 PCH_TS_VSS2 Set to Vss when LOW
LOW - DISABLED R120 *0_04 PCH_MUTE# K4 TS_VSS2 NV_CLE
28 ICPPE# GPIO35 AH10 PCH_TS_VSS3 Set to Vcc when HIGH
R326 10K_04 LED_DGPU# SATA_ODD_PRSNT# V8 TS_VSS3
DGPU_PWROK 25 SATA_ODD_PRSNT# SATA2GP / GPIO36 AK10 PCH_TS_VSS4
R357 10K_04 PLACE R553 CLOSE TO THE BRANCHING POINT
FDI_OVRVLTG M5 TS_VSS4
SATA3GP / GPIO37 ( TO CPT and NVRAM CONNECTOR
in
MFG_MODE N2 P37
SLOAD / GPIO38 NC_1
GFX_CRB_DET M3
SDATAOUT0 / GPIO39
TEST_SET_UP V13 BG2
SDATAOUT1 / GPIO48 VSS_NCTF_15
3.3VS R139 *0_04 CRIT_TEMP_REP#_R V3 BG48
28 CRIT_TEMP_REP# SATA5GP / GPIO49 / TEMP_ALERT# VSS_NCTF_16
R100 *100K_04 TEST_DET D6 BH3
3.3V GPIO57 VSS_NCTF_17
R325 *10K_04 GFX_CRB_DET
R106 100K_04 BH47
VSS_NCTF_18
R328
100K_04
EXTERNAL GFX:HIGH
h
INTERNAL GFX: LOW (DEFAULT) BOARD ID A4
A44
A45
A46
VSS_NCTF_1
VSS_NCTF_2
VSS_NCTF_3
VSS_NCTF_19
VSS_NCTF_20
VSS_NCTF_21
BJ4
BJ44
BJ45
BJ46
NCTF
VSS_NCTF_4 VSS_NCTF_22
.c
R124 10K_04 BIOS_REC A5 BJ5
A6 BJ6
R133 VSS_NCTF_6 VSS_NCTF_24
BIOS RECOVERY
B3 C2
*0_04
DISABLE----HIGH (DEFAULT) VSS_NCTF_7 VSS_NCTF_25
ENABLE-----LOW B47 C48
BD1 D1
BD49 D49
3.3V BE1 E1
w
R316 *10K_04 ICC_EN# BE49 E49
BF1 F1
R317 INTEGRATED Clock Chip Enable VSS_NCTF_13 VSS_NCTF_31
BF49 F49
1K_04
ICC_EN#: HIGH - DISABLED [DEFAULT] VSS_NCTF_14 VSS_NCTF_32
LOW - ENABLED
PANTHER POINT HM77 MP
w
w
B - 18 PCH 6/9- GPIO, CPU

Schematic Diagrams
PCH 7/9- PWR
m
PantherPoint -M (POWER)
3.3VS
o
L17 *15mil_s hort_06
1.05VS
U20G POWER VCCA_DAC_3.3VS 5VS
1.3A 1mA U10
AA23 U48 L15 HCB1608KF-121T25 5 1
AC23 VCCCORE[1] VCCADAC C252 C266 OUT IN
C261 C209 C228 C223 AD21 VCCCORE[2] C246 C249 C251 C270 C273 R259
CRT
VCCCORE[3]
22u_6.3V_X5R_08
*22u_6.3V_X5R_08
AD23 U47 3
.c
10u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 AF21 VCCCORE[4] VSSADAC 0.1u_10V_X5R_04 *0.1u_10V_X5R_04 *23.7K_1%_04 SHDN# C268
VCC CORE
AF23 VCCCORE[5] 0.01u_16V_X7R_04 10u_6.3V_X5R_06 22u_6.3V_X5R_08 SET 4 2
AG21 VCCCORE[6] SET GND
*1u_6.3V_Y5V_04
AG23 VCCCORE[7] 3.3VS_VCCA_LVD 3.3VS R261 *APL5603-33B
AG24 VCCCORE[8] AK36
1mA
R250 *15mil_short_06
AG26 VCCCORE[9] VCCALVDS *10K_1%_04
AG27 VCCCORE[10] AK37 C235
AG29 VCCCORE[11] VSSALVDS
AJ23 VCCCORE[12] *1u_6.3V_X5R_04
AJ26 VCCCORE[13]
LVDS
AM37 1.8VS_VCCTX_LVD APL5603-33B 6-02-56033-4C0
AJ27 VCCCORE[14] VCCTX_LVDS[1]
60mA
AJ29 VCCCORE[15] AM38 L32 HCB1608KF-121T25 G9091-330T11UF 6-02-90913-4C0
AJ31 VCCCORE[16] VCCTX_LVDS[2] 1.8VS
1.05VS VCCCORE[17] AP36 C247 C250 C395
x
VCCTX_LVDS[3]
1.05VS_VCCAPLL_EXP AP37 0.01u_16V_X7R_04 0.01u_16V_X7R_04 22u_6.3V_X5R_08
R225 *15mil_s hort_06 AN19 VCCTX_LVDS[4]
VCCIO[28]
1.05VS_VCCAPLL_EXP1
L13 *HCB1005KF-121T20
C258
BJ22
VCCAPLLEXP
V33
266mA
3.3VS
Sheet 18 of 42
fi
AN16 VCC3_3[6]
HVCMOS
*10u_6.3V_X5R_06
AN17
VCCIO[15]
VCCIO[16] V34
C221
0.1u_10V_X5R_04
PCH 7/9- PWR
VCC3_3[7]
AN21
VCCIO[17]
1.05VS AN26 1.5VS_1.8VS
2.93A
2.92A VCCIO[18]
160mA
AN27 AT16
C234 C244 C224 C229 C214 VCCIO[19] VCCVRM[3]
a
AP21
10u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 VCCIO[20]
AP23 AT20
42mA
VCCIO[21] VCCDMI[1] 1.05VS
AP24
DMI
C230 C245
VCCIO[22] VCCIO 2mA
AP26 AB36 VCCCLKDMI R242 *15mil_short_06 1u_6.3V_X5R_04 10u_6.3V_X5R_08
VCCIO[23] VCCCLKDMI 1.05VS
AT24
in
VCCIO[24]
AN33
VCCIO[25]
AN34 AG16
3.3VS VCCIO[26] VCCDFTERM[1] V_NVRAM_VCCQ
266mA BH29 AG17 190mA R159 *15mil_short_06 1.8VS
VCC3_3[3] VCCDFTERM[2]
DFT / SPI
C255 C206 R154 *0_04 3.3VS

1.5VS_1.8VS AJ16
0.1u_10V_X5R_04 VCCDFTERM[3] 0.1u_10V_X5R_04
160mA AP16
VCCVRM[2] AJ17
1.05VS R218 *0_06

1.05VS_VCCAPLL_FDI
BG6
AP17
VccAFDIPLL
VCCIO[27]
h
VCCDFTERM[4]
V1
20mA
VCCME3.3V R342
R345
*10mil_short_04
*0_04
3.3VS
FDI
1.05S_VCC_DMI VCCSPI 3.3V

42mA AU20
1.05VS R245 *15mil_short_06 C373
VCCDMI[2]
.c
1u_6.3V_X5R_04
w
1.05VS 1.5VS 1.8VS 1.5VS_1.8VS

w
R375 *0_04
R377 *20mil_04
R376 *0_04
w
PCH 7/9- PWR B - 19

Schematic Diagrams
PCH 8/9 POWER
m
L30 1.05VS_VCCA_CLK
PantherPoint - M (POWER)
*HCB1005KF-121T20
1.05VS 1.05VS
3.3V U20J POWER 2.92A
AD49 N26
o
C195
VCCACLK VCCIO[29] C231
0.1u_10V_X5R_04 3mA P26
T16 VCCIO[30] 1u_6.3V_X5R_04
VCCDSW3_3 P28
VCCIO[31] 3.3V
C180 *0.1u_10V_X5R_04 PCH_VCCDSW V12 T27 97mA
L12 DCPSUSBY P VCCIO[32]
HCB1608KF-121T25 266mA T29
.c
VCC3_3 T38 VCCIO[33] C190 C198
3.3VS VCC3_3[5]
C233 C232 T23 0.1u_10V_X5R_04 0.1u_10V_X5R_04
BH23 VCCSUS3_3[7]
10u_6.3V_X5R_06 1u_6.3V_X5R_04 VCCAPLLDMI2 T24
AL29 VCCSUS3_3[8]
1.05VS VCCIO[14] V23
VCCSUS3_3[9]
USB
AL24 V24 1mA D13 RB751S-40C2
VCCAPLL_CPY _PCH DCPSUS[3] VCCSUS3_3[10] C A
1.05VS 3.3V
L16 *HCB1608KF-121T25 P24

C216 *0.1u_16V_Y5V_04 DCPSUS VCCSUS3_3[6] R335 10_1%_04
AA19 5V
VCCASW[1] T26 C189
1.01A 1.05VS
x
AA21 VCCIO[34]
1.05VS VCCASW[2] 0.1u_10V_X5R_04
C205 C219 AA24 M26 5VA_PCH_VCC5REFSUS
VCCASW[3] V5REF_SUS
Clock and Miscellaneous

*22u_6.3V_X5R_08 1u_6.3V_X5R_04 AA26
Sheet 19 of 42 AA27
VCCASW[4]
VCCASW[5]
DCPSUS[4]
AN23
AN24
VCCA_USBSUS C218 *1u_6.3V_X5R_04
3.3V
fi
AA29 VCCSUS3_3[1]
PCH 8/9 POWER C215 C191 AA31

VCCASW[6]
VCCASW[7]
1mA
5VS_PCH_VCC5REFSUS
D3 RB751S-40C2
22u_6.3V_X5R_08 1u_6.3V_X5R_04 AC26 P34 C A
VCCASW[8] V5REF 3.3VS
AC27 R143 10_1%_04
VCCASW[9] N20
97mA 5VS
AC29 VCCSUS3_3[2]
PCI/GPIO/LPC
C204
VCCASW[10] N22
C208 AC31 VCCSUS3_3[3] 1u_6.3V_X5R_04
a
VCCASW[11] P20
1u_6.3V_X5R_04 AD29 VCCSUS3_3[4]
VCCASW[12] P22
AD31 VCCSUS3_3[5] 3.3V
VCCASW[13] C188
W21 AA16
266mA
VCCASW[14] VCC3_3[1] 3.3VS
1u_6.3V_X5R_04
W23 W16 C210 C187 C182
VCCASW[15] VCC3_3[8]
in
W24 T34 0.1u_10V_X5R_04 *0.1u_10V_X5R_04 0.1u_10V_X5R_04
VCCASW[16] VCC3_3[4]
W26
VCCASW[17]
W29
C181 0.1u_10V_X5R_04 VCCASW[18]
W31 AJ2
VCCASW[19] VCC3_3[2] 1.05S_SATA3 L11
1.05VS 1.05VS_VCCA_A_DPL W33 HCB1005KF-121T20
1.5VS_1.8VS VCCASW[20] AF13
2.92A
L20 1.05VS
HCB1608KF-121T25 VCCIO[5]
. VCCRTCEXT N16
DCPRTC AH13
C194
C277 C275 VCCIO[12] 1u_6.3V_X5R_04

16mA
22u_6.3V_X5R_08
h
1u_6.3V_X5R_04
R258
*0_04
1.05VS_VCCA_B_DPL
80mA
Y49
BD47
VCCVRM[4]
VCCADPLLA
VCCIO[13]
VCCIO[6]
AH14
AF14
AK1
L29
*HCB1005KF-121T20
SATA
80mA 1.05VS_VCCAPLL_SATA3
VCCAPLLSATA 1.05VS
. BF47
VCCADPLLB 1.5VS_1.8VS
L22 150mA AF11
.c
HCB1608KF-121T25 1.05VS
C272 C271 C276 C269 AF17 VCCVRM[1] 1.05VS
AF33 VCCIO[7]
*220u_6.3V_6.3*6.3*4.2
C430 C196 C200

VCCDIFFCLKN[1]
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
*22u_6.3V_X5R_08
1u_6.3V_X5R_04
+ AF34 AC16 3.3V 1.5V 3.3A_1.5A_HDA_IO

1u_6.3V_X5R_04 1u_6.3V_X5R_04 AG34 VCCDIFFCLKN[2] VCCIO[2]
VCCDIFFCLKN[3] AC17
VCCIO[3] C201 R341 *0_06
AG33 AD17 R339 *15mil_short_06
1.05VS VCCSSC VCCIO[4] 1u_6.3V_X5R_04
C227
VCCSST V16
C186 0.1u_10V_X5R_04 DCPSST
1u_6.3V_X5R_04 1.01A
1.05M_VCCSUS T17 T21
DCPSUS[1] VCCASW[22] 1.05VS
w
C193 *1u_6.3V_X5R_04 V19

DCPSUS[2]
MISC
V21
<1mA VCCASW[23]
1.05VS BJ 8
CPU
C213 C220 C222 V_PROC_IO T19
VCCASW[21]
4.7u_6.3V_X5R_06 *0.1u_10V_X5R_04 0.1u_10V_X5R_04 3.3A_1.5A_HDA_IO
A22 P32
16mA
2mA VCCRTC RTC VCCSUSHDA
HDA
w
RTCVCC
C370 C371 C372 PANTHER POINT HM77 MP C197
1u_6.3V_X5R_04 *0.1u_10V_X5R_04 0.1u_10V_X5R_04 0.1u_10V_X5R_04

w
B - 20 PCH 8/9 POWER

Schematic Diagrams
PCH 9/9- GND
m
U20I
PantherPoint -M (GND) Voltage Rail Voltage S0 Iccmax Current (A)
U20H
V_CPU_IO 1.05 1 (mA)
AY 4 H46 H5 V5REF 5 1 (mA)
AY42 VSS[159] VSS[259] K18 VSS[0]
AY46 VSS[160] VSS[260] K26 AA17 AK38 V5REF_Sus 5 1 (mA)
AY 8 VSS[161] VSS[261] K39 AA2 VSS[1] VSS[80] AK4
B11 VSS[162] VSS[262] K46 AA3 VSS[2] VSS[81] AK42
Vcc3_3 3.3 0.266
o
B15 VSS[163] VSS[263] K7 AA33 VSS[3] VSS[82] AK46 VccADAC3 1.05 1 (mA)
B19 VSS[164] VSS[264] L18 AA34 VSS[4] VSS[83] AK8
B23 VSS[165] VSS[265] L2 AB11 VSS[5] VSS[84] AL16 VccADPLLA 1.05 0.08
B27 VSS[166] VSS[266] L20 AB14 VSS[6] VSS[85] AL17 VccADPLLB 1.05 0.08
B31 VSS[167] VSS[267] L26 AB39 VSS[7] VSS[86] AL19
B35 VSS[168] VSS[268] L28 AB4 VSS[8] VSS[87] AL2 VccCore 1.05 1.3
VccDMI 1.1 0.042
.c
F45 VSS[171] VSS[271] M12 AB7 VSS[11] VSS[90] AL26 VccIO 1.05 2.925
BB12 VSS[172] VSS[272] P16 AC19 VSS[12] VSS[91] AL27
BB16 VSS[173] VSS[273] M18 AC2 VSS[13] VSS[92] AL31 VccASW 1.05 1.01
BB20 VSS[174] VSS[274] M22 AC21 VSS[14] VSS[93] AL33 VccSPI 3.3 0.020
BB22 VSS[175] VSS[275] M24 AC24 VSS[15] VSS[94] AL34
BB24 VSS[176] VSS[276] M30 AC33 VSS[16] VSS[95] AL48 VccDSW3_3 3.3 2 (mA)
BB28 VSS[177] VSS[277] M32 AC34 VSS[17] VSS[96] AM11
VSS[178] VSS[278] VSS[18] VSS[97] VccDFTERM 1.8 0.19
BB30 M34 AC48 AM14
BB38 VSS[179] VSS[279] M38 AD10 VSS[19] VSS[98] AM36 VccSus3_3 3.3 0.097
BB4 VSS[180] VSS[280] M4 AD11 VSS[20] VSS[99] AM39
BB46 VSS[181] VSS[281] M42 AD12 VSS[21] VSS[100] AM43 VccSusHDA 3.3 1 (mA)
BC14 VSS[182] VSS[282] M46 AD13 VSS[22] VSS[101] AM45 VccVRM 1.5 0.16
BC18 VSS[183] VSS[283] M8 AD19 VSS[23] VSS[102] AM46
VccClKDMI 1.05 0.02
x
BC2 VSS[184] VSS[284] N18 AD24 VSS[24] VSS[103] AM7
BC22 VSS[185] VSS[285] P30 AD26 VSS[25] VSS[104] AN2
BC26 VSS[186] VSS[286] N47 AD27 VSS[26] VSS[105] AN29
VccSSC 1.05 0.095
BC32 VSS[187] VSS[287] P11 AD33 VSS[27] VSS[106] AN3 VccDIFFCLKN 1.05 0.055
BC34 VSS[188] VSS[288] P18 AD34 VSS[28] VSS[107] AN31
BC36
BC40
BC42
VSS[189]
VSS[190]
VSS[191]
VSS[289]
VSS[290]
VSS[291]
T33
P40
P43
AD36
AD37
AD38
VSS[29]
VSS[30]
VSS[31]
VSS[108]
VSS[109]
VSS[110]
AP12
AP19
AP28
VccALVDS
VccTX_LVDS
3.3
1.8
1 (mA)
0.06 Sheet 20 of 42
fi
VSS[192] VSS[292] VSS[32] VSS[111]
BC48
BD46
BD5
VSS[193]
VSS[194]
VSS[195]
VSS[293]
VSS[294]
VSS[295]
P47
P7
R2
AD39
AD4
AD40
VSS[33]
VSS[34]
VSS[35]
VSS[112]
VSS[113]
VSS[114]
AP30
AP32
AP38
PCH 9/9- GND
BE22 R48 AD42 AP4
BE26 VSS[196] VSS[296] T12 AD43 VSS[36] VSS[115] AP42
BE40 VSS[197] VSS[297] T31 AD45 VSS[37] VSS[116] AP46
BF10 VSS[198] VSS[298] T37 AD46 VSS[38] VSS[117] AP8
BF12 VSS[199] VSS[299] T4 AD8 VSS[39] VSS[118] AR2
BF16 VSS[200] VSS[300] W34 AE2 VSS[40] VSS[119] AR48
BF20 VSS[201] VSS[301] T46 AE3 VSS[41] VSS[120] AT11
a
BF22 VSS[202] VSS[302] T47 AF10 VSS[42] VSS[121] AT13
BF24 VSS[203] VSS[303] T8 AF12 VSS[43] VSS[122] AT18
BF26 VSS[204] VSS[304] V11 AD14 VSS[44] VSS[123] AT22
BF28 VSS[205] VSS[305] V17 AD16 VSS[45] VSS[124] AT26
BD3 VSS[206] VSS[306] V26 AF16 VSS[46] VSS[125] AT28
BF30 VSS[207] VSS[307] V27 AF19 VSS[47] VSS[126] AT30
in
BG17 VSS[211] VSS[311] V39 AF29 VSS[51] VSS[130] AT42
BG44 VSS[214] VSS[314] W17 AF4 VSS[54] VSS[133] AU24
BG8 VSS[215] VSS[315] W19 AF42 VSS[55] VSS[134] AU30
BH11 VSS[216] VSS[316] W2 AF46 VSS[56] VSS[135] AV16
BH19 VSS[219] VSS[319] Y 12 AF8 VSS[59] VSS[138] AV30
H10 VSS[220] VSS[320] Y 38 AG19 VSS[60] VSS[139] AV38
BH27 VSS[221] VSS[321] Y4 AG2 VSS[61] VSS[140] AV4
BH31 VSS[222] VSS[322] Y 42 AG31 VSS[62] VSS[141] AV43
BH33
BH35
BH39
BH43
BH7
D3
D12
D16
VSS[223]
VSS[224]
VSS[225]
VSS[226]
VSS[227]
VSS[228]
VSS[229]
VSS[230]
VSS[323]
VSS[324]
VSS[325]
VSS[328]
VSS[329]
VSS[330]
VSS[331]
VSS[333]
Y 46
Y8
BG29
N24
AJ3
AD47
B43
BE10
h AG48
AH11
AH3
AH36
AH39
AH40
AH42
AH46
VSS[63]
VSS[64]
VSS[65]
VSS[66]
VSS[67]
VSS[68]
VSS[69]
VSS[70]
VSS[142]
VSS[143]
VSS[144]
VSS[145]
VSS[146]
VSS[147]
VSS[148]
VSS[149]
AV8
AW14
AW18
AW2
AW22
AW26
AW28
AW32
.c
D18 VSS[231] VSS[334] BG41 AH7 VSS[71] VSS[150] AW34
D22 VSS[232] VSS[335] G14 AJ19 VSS[72] VSS[151] AW36
D24 VSS[233] VSS[337] H16 AJ21 VSS[73] VSS[152] AW40
D26 VSS[234] VSS[338] T36 AJ24 VSS[74] VSS[153] AW48
D30 VSS[235] VSS[340] BG22 AJ33 VSS[75] VSS[154] AV11
D32 VSS[236] VSS[342] BG24 AJ34 VSS[76] VSS[155] AY12
D34 VSS[237] VSS[343] C22 AK12 VSS[77] VSS[156] AY22
D38 VSS[238] VSS[344] AP13 AK3 VSS[78] VSS[157] AY28
D42 VSS[239] VSS[345] M14 VSS[79] VSS[158]
D8 VSS[240] VSS[346] AP3 PANTHER POINT HM77 MP
E18 VSS[241] VSS[347] AP1
E26 VSS[242] VSS[348] BE16
G18 VSS[243] VSS[349] BC16
w
G20 VSS[244] VSS[350] BG28

G26 VSS[245] VSS[351] BJ28
G28 VSS[246] VSS[352]
G36 VSS[247]
G48 VSS[248]
H12 VSS[249]
H18 VSS[250]
H22 VSS[251]
H24 VSS[252]
H26 VSS[253]
w
H30 VSS[254]
H32 VSS[255]
H34 VSS[256]
F3 VSS[257]
VSS[258]

w
PCH 9/9- GND B - 21

Schematic Diagrams
WLAN, 3G, MSATA
m
3G/MSATA MINI CARD
+
C300 220u_6.3V_6.3*6.3*4.2 GND J_SIM1
C27 0.1u_16V_Y 5V_04 SIM CONN (TOP VIEW) R5
o
9 8 *10mil_short_04
J_3G1 UIM_PWR R4 *4.7K_04 UIM_DATA 7 DETECT_SW UIM_MCMD 6 UIM_D UIM_DATA
1 2 60mils UIM_CLK UIM_C 5 UIM_DATA UIM_I/O 4 UIM_VPP
3 WAKE# 3.3V_0 6 3G_3.3V UIM_RST 3 UIM_CLK UIM_VPP 2
R6 *10mil_short_04
5 BT_DATA 1.5V_0 8 UIM_PWR UIM_PWR 1 UIM_RST UIM_GND
GNG
GND
GND
GND
BT_CHCLK UIM_PWR 10 UIM_DATA UIM_PWR C12 C13 C11
7 UIM_DATA 12 UIM_CLK C28
11 CLKREQ# UIM_CLK 14
*22p_50V_NPO_04
*22p_50V_NPO_04
*22p_50V_NPO_04
UIM_RST 91712-0090P
GND2
GND1
GND3
GND4
3G_3.3V 13 REFCLK- UIM_RESET 16 UIM_VPP 0.1u_16V_Y5V_04 C15 C14
.c
9 REFCLK+ UIM_VPP
15 GND0 4 0.1u_16V_Y 5V_04 *22p_50V_NPO_04
GND1 GND5 GND
C26
KEY GND GND GND
0.1u_16V_Y5V_04
21 18 Layout®É
27 GND2 GND6 26
GND 29 GND3 GND7 34 1. SIM¤§©Ò¦³«H¸¹½u¥[²Ê(10mil)
GND4 GND8 40 GND
GND9
2. ©Ò¦³«H¸¹½u¤§¶¡¥[GND
35 50
GND
28 3G_DET# C22 0.01u_16V_X7R_04 23 GND11 GND10 3. SIM hold ¥»Åé¥|©P¥[GND³òÂ¶
12 SATA_RXP4 25 PETn0 20
C23 0.01u_16V_X7R_04 4. SIM CONN ¾aªñ MINI CARD CONN
12 SATA_RXN4 31 PETp0 W_DISABLE# 22 3G_EN 28
C19 0.01u_16V_X7R_04
12 SATA_TXN4 PERn0 PERSET#
x
C20 0.01u_16V_X7R_04 33 30
12 SATA_TXP4 PERp0 NC(SMB_CLK) 32
17
19
37
NC3
NC4
NC(SMB_DATA)
NC(USB_D-)
NC(USB_D+)
36
38 USB_PN2 16
USB_PP2 16
MSATA POWER
NC6 60mils
Sheet 21 of 42
39 24 PJ7
60mils
3G_3.3V
41
43
45
NC7
NC8
NC9
3.3VAUX
1.5V_1
1.5V_2
28
48
52
3G_3.3V
Port 2 3G POWER 2 1
fi
C21 C18 OPEN_2A
NC10 3.3V_1 3G_3.3V
WLAN, 3G, MSATA 47

NC11 NC(LED_WWAN#)
42
10u_6.3V_X5R_06
49 44 3.3V 3G_3.3V
0.1u_16V_Y5V_04
3G_EN R13 *0_04 + C299 Q11
51 NC12 LED_WLAN# 46 AO3415
NC13 NC(LED_WPAN#) 220u_6.3V_6.3*6.3*4.2 3A S D 3A
GND GND 88914-5204 H=8mm
C323
GND GND GND C320 1u_6.3V_X5R_04 C17
G
1u_6.3V_X5R_04
0.1u_16V_Y5V_04
R44
a
R291 10_06
R290 20K_1%_04
100K_04
3
D
6
D Q12B
5G MTDN7002ZHS6R
2G Q12A S
4
28 3G_POWER_EN S MTDN7002ZHS6R
in
1
From EC default HI
3.3V_WLAN
WLAN MINI CARD J_MINI1

C433
0.1u_16V_Y5V_04 WLAN POWER

±±¨îPIN 2,24,39,41,52
14,24 PCIE_WAKE#
R421 *0_04 WAKE# 1 2 20 mil
3 WAKE# 3.3VAUX_0 6
(FOR INTEL SMART CONNECTOR)
Bottom
3.3V
13 WLAN_CLKREQ#
13 CLK_PCIE_WLAN#
13 CLK_PCIE_WLAN
R416 10K_04
h5
7
11
13
9
15
COEX1
COEX2
CLKREQ#
REFCLK-
REFCLK+
GND0
GND1
1.5V_0
UIM_PWR
UIM_DATA
UIM_CLK
UIM_RESET
UIM_VPP
GND5
8
10
12
14
16
4
80CLK
3IN1
20 mil
R417
80_DET#
*0_04
R418
VDD3
*10mil_short_04
BT_SBD# 13
80CLK 28
3IN1
J_80DBG1
28
¤£»ÝSUPPORT SMART CONNECTOR ®É,
¥iJUMP SHORT ¤U¤è¹s¥ó¤£¤W¥ó
3.3V
>120 mil
3.3V
Q20
2
PJ25
OPEN_2A
*AO3415
1
>120 mil
3.3V_WLAN
.c
S D
KEY 1 80CLK
6-34-M52NS-020-2 21 18 2 3IN1 R415 *20K_04
27 GND2 GND6 26 3 C418
VDD3
G
29 GND3 GND7 34 4 C439 *1u_6.3V_X5R_04
GND4 GND8 40 85205-04001 *0.1u_16V_Y5V_04
35 GND9 50 R423 *10K_04 C423
28 WLAN_DET# 23 GND11 GND10 3.3VS
R414 R397
13 PCIE_RXN3_WLAN 25 PETn0 20 *1u_6.3V_X5R_04
13 PCIE_RXP3_WLAN 31 PETp0 W_DISABLE# 22 WLAN_EN 28
*20K_1%_04 *10_06
13 PCIE_TXN3_WLAN 33 PERn0 PERSET# 30 BUF_PLT_RST# 16,24,28
13 PCIE_TXP3_WLAN PERp0 SMB_CLK 32 3.3V R413 *100K_04
BT_DET# 28
6
17 SMB_DATA 36 D
USB_PN3 16
Port 3
3
BT_EN R419 *0_04 BT_EN_R 19 Reserv ed0 USB_D- 38 D
w
37 Reserv ed1 USB_D+ USB_PP3 16 2 G

GND12
20 mil Q19A
39 24 R422 5 G Q19B S *RT3K44M
3.3V_WLAN 3.3V_WLAN 28 WLAN_CON_POWER
1
41 3.3VAUX_3 3.3VAUX_1 28 S *RT3K44M
4
43 3.3VAUX_4 1.5V_1 48 47K_04
GND13 1.5V_2
±µ¨ìEC ,¶·»PEC½T»{
13 CL_CLK1
R424 *0_04 CL_CLK1_R 45
Reserv ed2 3.3VAUX_2
52 40 mil 3.3V_WLAN
R432 *0_04 CL_DATA1_R 47 42
13 CL_DATA1 49 Reserv ed3 LED_WWAN# 44
R435 *0_04 CL_RST#1_R BT_DET#
13 CL_RST#1 51 Reserv ed4 LED_WLAN# 46 WLAN_LED# 25
3.3V R444 *10K_04 PCH_BT_EN_#
Reserv ed5 LED_WPAN# C436
88912-5204M-01 H=6.5mm
R451 *20mil_04 *180p_50V_NPO_04
w
25,28 BT_EN
R448 *0_04
13 BT_SBD#
w
B - 22 WLAN, 3G, MSATA

Schematic Diagrams
CCD, TPM, FAN, CLICK
m
FOR POWER SW BOARD
6-53-3050B-042
POWER BUTTON CPU FAN CONTROL
o
3.3VS
3/23 SW5 U17
*TJG-532-V-T/R FON# 1 8
J_SW1 1 2 M_BTN# 2 FON GND 7
20mil 3 4 5VS 3 VIN GND 6
1 5VS_FAN 4 VOUT GND 5
R52 *10mil_short_04 M_BTN# C361
2 M_BTN# 29 VSET GND
5
6
3 1u_6.3V_X5R_04 NCT3940S-A
4
CPU_FAN 28
.c
85201-04051 AX995B(SOT23-6) & APE8872 6-02-03940-B20
6-02-00995-B20 C360
Co-Layout 6-02-99011-B20 0.1u_16V_Y 5V_04
5VS_FAN 5VS U18
FON# 4
3
1
FON#
VIN 2
5VS_FAN CPU_FAN
J_FAN1
CLICK CONN 5VS_TP 28 CPU_FAN

6 VOUT
VSET
GND
GND
5
1
2
*AX995B C362
R388 *15mil_short_06 R310 3
5VS
2nd Source 10u_6.3V_X5R_08 85205-03701
x
C414 C411 *0_04 PN:APE8874
R394 R393
*10u_6.3V_X5R_06 1u_6.3V_X5R_04 J_FAN1
J_TP1 28 CPU_FANSEN
10K_04 10K_04 3
¹w¯dcost down solution R311 4.7K_04
1 3.3VS
2
3
4
TPBUTTON_L
TPBUTTON_R C410 C409
TP_CLK 28
TP_DATA 28
1
Sheet 22 of 42
fi
5
6
85201-06051
47p_50V_NPO_04 47p_50V_NPO_04
CCD, TPM, FAN,
CSW1~4
TPM 1.2 CLICK
LIFT 2 4 RIGHT
SW1 SW2
KEY TJG-532-V-T/R 1 3 TJG-532-V-T/R KEY
a
1 2 1 2
3 4 TPBUTTON_L 3 4 TPBUTTON_R
W540EU 3.3VS
5
6
5
6
R127 *10K_04
3.3V
6-53-3050B-042 6-53-3050B-042
U4 C166 C170 C156 C169
26 10
in
12,28 LPC_AD0 23 LAD0 VDD1 19 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04 1u_6.3V_X5R_04
12,28 LPC_AD1 20 LAD1 VDD2 24
12,28 LPC_AD2 17 LAD2 VDD3
12,28 LPC_AD3 LAD3
LIFT RIGHT 21 TPM VDD3
2 4 16 PCLK_TPM LCLK
SW3 SW4
KEY *TJG-532-V-T/R 1 3 *TJG-532-V-T/R KEY 22 5
1 2 1 2 12,28 LPC_FRAME# 16 LFRAME# VSB
W550EU 3 4 TPBUTTON_L 3 4 TPBUTTON_R 3,16 PLT_RST# 27 LRESET# C157
12,28 SERIRQ 15 SERIRQ
14 PM_CLKRUN# CLKRUN# 0.1u_16V_Y 5V_04
5
6
5
6
28 6 TPM3004
14 S4_STATE# LPCPD# GPIO 2 TPM3005
TPM_BADD 9 GPIO2
6-53-3050B-042 6-53-3050B-042
CCD + Internal MIC

h TPM_PP
TPM3001 1
TPM3002 3
7
TPM3003 12
8
TESTBI/BADD
PP
NC_1
NC_2
NC_3
XTALI
XTALO
GND_1
GND_2
GND_3
13
14
4
11
18
25
XTALI
XTALO
X1
4
3
MC-306_32.768KHz
1
2
.c
TESTI GND_4 C161 C163
5V 5V_CCD SLB9635TT_3.17 15p_50V_NPO_04 15p_50V_NPO_04

U3
1A 4 1 1A
5 VIN VOUT
VIN Asserted before entering S3
C1 C5 C4 LPC reset timing:
3 2
28 CCD_EN EN GND
*1u_6.3V_X5R_04 *0.1u_16V_Y5V_04 2.2u_6.3V_X5R_06 LPCPD# inactive to LRST# inactive 32~96us 3.3VS
G5243A
From EC default HI Closs to J_CCD1 HI: ACCESS TPM_PP R85 *10K_04 R126 C171
TPM _PP *33_04 *10p_50V_NPO_04
LOW: NORM AL ( Internal PD ) TPM_BADD R84 10K_04 PCLK_TPM PCLK_TPM1
w
C6 J_CCD1 HI: 4E/ 4F H

TPM _BADD LOW: 2E/ 2F H R83 *10K_04
*0.01u_16V_X7R_04 1
Port8 16
16
USB_PN8
USB_PP8
2
3
4
R469 *10mil_short_04 INT_MIC_OUT_R 5
27 INT_MIC_OUT 6
85205-06001
*100p_50V_NPO_04 C7
w
3/23
R470 *10mil_short_04 AUDGR
27 AUDG_R
Closs to J_INTMIC1
w
CCD, TPM, FAN, CLICK B - 23

Schematic Diagrams
USB3.0, LID SWITCH
m
USB 3.0 3ÁûCO-LAY 3ÁûCO-LAY PORT 1 USBVCC1
C390 22u_6.3V_X5R_08 C291 22u_6.3V_X5R_08

U23 100 MIL
L31 C386 22u_6.3V_X5R_08 L23 C290 22u_6.3V_X5R_08 USB_OC#01 R381 *0_04 5 6
o
HCB1608KF-121T25 HCB1608KF-121T25 FLG# VOUT1
USBVCC3.0_1 USBVCC3.0_2 2 7
+
USBVCC1 C392 *220u_6.3V_6.3*6.3*4.2 USBVCC2 C435 *220u_6.3V_6.3*6.3*4.2 5V C412 C404
VIN1 VOUT2
3 8 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
GND GND VIN2 VOUT3
CLOSE TO CONNECTOR PORT 1 CLOSE TO CONNECTOR PORT 2 4 1
J_USB1 J_USB2 25,29,32 DD_ON# EN# GND
SY6288DCAC
SSTX3+ C253 0.1u_10V_X7R_04 TXP1_R 9 GND1 SSTX1+ C288 0.1u_10V_X7R_04 TXP0_R 9 GND1 C279 2A/90mohm
Standard-A
Standard-A
.c
1 SSTX+ SHIELD 1 SSTX+ SHIELD 10u_6.3V_X5R_08
SSTX3- C260 0.1u_10V_X7R_04 TXN1_R 8 VBUS SSTX1- C289 0.1u_10V_X7R_04 TXN0_R 8 VBUS
USB_PN0- 2 SSTX- USB_PN1- 2 SSTX-
4 D- 4 D-
2
USB_PP0+ 3 GND USB_PP1+ 3 GND
SSRX3+ 6 D+ SSRX1+ 6 D+ PJ17
7 SSRX+ 7 SSRX+
Diff. trace 90ohm SSRX3- 5 GND_D GND2 Diff. trace 90ohm SSRX1- 5 GND_D GND2 *OPEN-3mm
1
SSRX- SHIELD SSRX- SHIELD USBVCC2
GND Ni GND GND Ni GND

PORT 2
USB3.0 Max Trace 6-20-B4Z20-109 USB3.0 Max Trace 6-20-B4Z20-109

U24 100 MIL
R403 *0_04 5 6
length < 4" length < 4" 16,25 USB_OC#01 FLG# VOUT1
x
2 7 C422 C417
5V VIN1 VOUT2
3 8 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
VIN2 VOUT3
4 1
Sheet 23 of 42 R251 *10mil_short SSTX3+ R264 *10mil_short SSTX1+

25,29,32 DD_ON#
C287
EN#
SY6288DCAC
2A/90mohm
GND
fi
16 USB3_TX1P 16 USB3_TX2P
10u_6.3V_X5R_08
USB3.0, LID 16 USB3_TX1N R253 *10mil_short SSTX3-
16 USB3_TX2N R265 *10mil_short SSTX1-
USB Charge on, U24/C287 off
4 3 USB_PN0- 4 3 USB_PN1-
SWITCH 16
16
USB_PN0
USB_PP0
1
L14
2 USB_PP0+
*WCM2012F2S-161T03-short
25
25
USB1_PN1
USB1_PP1
1
L24
2 USB_PP1+
USB3.0 Layout Guidelines:
4 3 SSRX1+
4 3 16 USB3_RX2P
SSRX3+ L25 1. USB3.0 Differential trace impedance: 90ohm
16 USB3_RX1P 1
a
L18 2 SSRX1-
1 2 16 USB3_RX2N
SSRX3- *WCM2012F2S-161T03-short 2. Differential pairs The USB3.0 the total trace skew less than 5 mils.
16 USB3_RX1N
3. IC pad to USB Connector total length < 4"(Max)
4. USB3.0 Capacitor 0.1u_10V_X7R_04 Close to Connector.
5. PCIe Differential impedance 85 ohm.
in
3.3V 6. PCIe For transmitter and receiver the total trace length: 1"(Min)~~6"(Max).
LID SWITCH IC D1
7. PCIe Number of vias 4via hole(Max).
8. PCIe clock Differential impedance 100 ohm.
C
*BAV99 RECTIFIER
3.3V W540EU
9. PCIe Differential pairs and pairs spacing 20mils, with Other trace spacing 25mils.
R1 100K_04 AC
10. Power Trace width=20mils, Spacing=80 mils.
U1
1 2 LID_SW#
VCC OUT LID_SW# 11,28
GND
A
C486 C3
*1u_10V_Y5V_06
h
3
C2 MH248-ALFA-ESO *100p_50V_NPO_04
0.1u_16V_Y5V_04 H1 H14 H13
Reserve 3/28 M2 M6 M8 M4 M1 M5 M3 M7 2 9 2 9 2 9
M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK 3 8 3 8 3 8
4 1 7 4 1 7 4 1 7
5 6 5 6 5 6
3 Del U2 3/23
6-02-00248-LC2 MTH10_0B8_0D2_8 MTH8_0D2_8 MTH8_0D2_8
.c
1 2 6-02-00268-LC1
GND H20 GND H2 GND H10 GND
3.3V W550EU 2 9 2 9 2 9
3 8 3 8 3 8
J_LID1 4 1 7 4 1 7 4 1 7
M14 M9 M13 M11 M10 M15 M16 M12 3/27 5 6 5 6 5 6
LID_SW# 1 M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK
2 MTH6_0D2_2 MTH8_0D2_8 MTH10_0B8_0D2_8
3
*85204-03001 H15 GND H5 GND H11 GND H7 GND
2 9 2 9 2 9 2 9
3 8 3 8 3 8 3 8
For W550EU 3/28 4/3 4 1 7 4 1 7 4 1 7 4 1 7
5 6 5 6 5 6 5 6
w
MTH8_0D2_8 MTH8_0D2_8 MTH8_0D2_8 MTH10_0B8_0D2_8
GND GND GND GND GND

WLAN CPU ODD
H16 H19 H4 H9 H8 H6 H17 H18
H3 H12 H5_0B3_5D2_2 H6_0B4_7D3_7 H2_4B5_4D2_4 H8_0D4_3 H8_0D4_3 H8_0D4_3 H6_0B4_7D3_7 H6_0B4_7D3_7
C4X2_4B7X5_4D4X2_4 C4X2_4B7X5_4D4X2_4
w
w
B - 24 USB3.0, LID SWITCH

Schematic Diagrams
Card Reader (RTL8411)
m
Switching Regulator close to pin48
RTL8411 LAN_VDD33 VDD33/18
VDD10
3/23
R437 *28mil_06
VDD10 (Shape) L34 (Shape)
LED1/SPISCK
*SWF2520CF-4R7M-M
SWR LDO .
LANXTAL2
LANXTAL1
LAN_VDD33 REGLX VDD10
CARD_3V3
SD_CD#
REXT_C
R389 *28mil_06
mode mode
o
VCC_CARD
MS_D0
C446 C457
3/23 *4.7u_6.3V_X5R_06 *0.1u_16V_Y 5V_04

R390 REGLX VDD3 VDD3
65
64
63
62
61
60
59
58
57
55
54
53
52
51
50
49
56
*150_06 U25 REGLX and VDD10 must be shape
SD_CD#/MS_D5
LED0/SPICSB
LED1/SPISCK
AVDD33
AVDD33
AVDD10
CKXTAL2
CKXTAL1
AVDD33
XD_CD#
MS_D0/xD_D1
MS_D4
VDD33/18
DVDD10
GPO
RSET
GND
R411 R405 3/23 L37¡BC177¡BC448 must close to Pin 48
*28mil_06 R404
.c
*0_04 *10mil_short_04
1 48
26 LAN_MDIP0 2 MDIP0 REGOUT 47 VDDREG
26 LAN_MDIN0 3 MDIN0 VDDREG 46
VDD10 4 AVDD10 VDDREG 45 ENSWREG
26 LAN_MDIP1 5 MDIP1 ENSWREG_H 44 SDA/SPIDI LANXTAL2 R447 *0_04
26 LAN_MDIN1 6 MDIN1 SDA/SPIDI 43 FLEX_GLAN_CLK 13
D5 RB751S-40C2
26 LAN_MDIP2 7 MIDP2 LED3/SPIDO 42 C A
26 LAN_MDIN2 8 MDIN2 SCL/LED_CR 41 PCIE_WAKE# 14,21 From PCH pin F47
R430 *1M_04 LANXTAL1
VDD10 9 AVDD10 RTL8411-CG DVDD10 40 LAN_PCIE_WAKE#
VDD10
26 LAN_MDIP3 10 MDIP3 LANWAKEB 39 LAN_PCIE_WAKE# 28
26 LAN_MDIN3 11 MDIN3 DVDD33 38 LAN_VDD33
ISOLATE#
LAN_VDD33 12 AVDD33 ISOLATEB 37 X4
LAN_VDD33 Rising Time¡G LAN_VDD33
CARD_3V3 13 DVDD33 PERSTB 36 BUF_PLT_RST# 16,21,28 2 1 6-22-25R00-1BV
x
14 Card_3V3 CLKREQB 35
SD_CMD/MS_D6
SD_WP/MS_D1 2/7 6-22-25R00-1B4
SD_D1/MS_CLK
SD_CLK/MS_D3
1ms ~ 100ms 15 SD_D7 SD_WP/MS_D1 34 VDD3 3.3V
SD_D0/MS_D7
SD_D3/MS_D2
3/23 MS_INS# MS_BS FSX5L_25MHZ 6-22-25R00-1B5
16 SD_D6/MS_INS# MS_BS 33
VDD33/18
REFCLK_N
REFCLK_P
R401 *28mil_06 SD_D5 VDD33/18
VDD3 LAN_VDD33
EVDD10
73
SD_D4
SD_D2
GND8
Sheet 24 of 42
HSON
GND1
GND2
GND3
GND4
GND5
HSOP
72 R392 R391
HSIN
HSIP
GND
GND
R380 *28mil_06 71 GND7
VDD10 EVDD10 GND6 *10K_04 10K_04 C450 C449
fi
GND
Card Reader
66
67
68
69
70
17
18
19
20
21
22
24
25
26
27
28
29
30
31
32
23
R402 1.5K_04 SDA/SPIDI 22p_50V_NPO_04 22p_50V_NPO_04
LAN_VDD33 VIA LAN_CLKREQ# 13,16
R399 10K_04 LAN_PCIE_WAKE#
SD_D1/MS_CLK_R
SD_CLK/MS_D3_R
SD_D3/MS_D2_R
R429 10K_04 LED1/SPISCK PCIE_RXN_4_GLAN
PCIE_RXP_4_GLAN
C405
C406
0.1u_10V_X7R_04
0.1u_10V_X7R_04
PCIE_RXN4_GLAN 13 (RTL8411)
SD_CMD_R
PCIE_RXP4_GLAN 13
EVDD10
SD_D0_R
SD_D2_R
CLK_PCIE_GLAN# 13
3.3V R395 *1K_04
CLK_PCIE_GLAN 13
PCIE_TXN4_GLAN 13
a
R396 1K_04 ISOLATE#
3.3VS PCIE_TXP4_GLAN 13
R398 15K_04
Remind that R331 using the main power
R431 2.49K_1%_04 REXT_C
(S0 power)
Close to RTL8411 for SDXC EMI
SD_D0_R R386 SD_D0
*10mil_short_04
SD_D1/MS_CLK_R R387 SD_D1/MS_CLK

*10mil_short_04
in
SD_D2_R R382 SD_D2
*10mil_short_04
SD_D3/MS_D2_R R383 SD_D3/MS_D2

*10mil_short_04
VDD10 VDD10 VDD10 VDD10 VDD10
SD_CLK/MS_D3_R R385 SD_CLK/MS_D3
*10mil_short_04
SD_CMD_R R384 SD_CMD

*10mil_short_04
C432 C426 C424 C447 C451 C398 C399 C397 C396 C401 C400
0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04
Pin 3 Pin 8 Pin 41 Pin 52 Pin 61
EVDD10
C403
1u_6.3V_X5R_04
Pin 29
EVDD10
C408
*0.1u_16V_Y5V_04
Pin 29
VDDREG
C428
VDDREG
*4.7u_6.3V_X5R_06
Pin 46
C429
*0.1u_16V_Y5V_04
Pin 47
h
4 IN 1 SOCKET SD/MMC/MS/MS Pro W540EU
SD_CD#
SD_D2
SD_D3/MS_D2
SD_CMD
P1
P2
P3
P4
P5
J_CARD-REV1
CD_SD
DAT2_SD
CD/DAT3_SD
CMD_SD
Co-lay 3/28
SD_CD#
SD_D2
SD_D3/MS_D2
SD_CMD
P1
P2
P3
P4
P5
W550EU
J_CARD-REV2
CD_SD
DAT2_SD
CD/DAT3_SD
CMD_SD
.c
P6 VSS_SD P6 VSS_SD
VCC_CARD SD_CLK/MS_D3 P7 VDD_SD VCC_CARD SD_CLK/MS_D3 P7 VDD_SD
C285 P8 CLK_SD P8 CLK_SD
SD_D0 P9 VSS_SD SD_D0 P9 VSS_SD
LAN_VDD33 LAN_VDD33 LAN_VDD33 LAN_VDD33 LAN_VDD33 LAN_VDD33 0.1u_16V_Y5V_04 SD_D1/MS_CLK P10 DAT0_SD SD_D1/MS_CLK P10 DAT0_SD
SD_WP/MS_D1 P11 DAT1_SD SD_WP/MS_D1 P11 DAT1_SD
P12 WP_SD P12 WP_SD
P13 VSS_MS P13 VSS_MS
2/22 VCC_CARD VCC_MS VCC_CARD VCC_MS
C419 C420 C416 C421 C448 C452 SD_D1/MS_CLK P14 SD_D1/MS_CLK P14
C284 SD_CLK/MS_D3 P15 SCLK_MS SD_CLK/MS_D3 P15 SCLK_MS
0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04 *10u_6.3V_X5R_06 0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y5V_04 MS_INS# P16 DAT3_MS MS_INS# P16 DAT3_MS
0.1u_16V_Y5V_04 SD_D3/MS_D2 P17 INS_MS SD_D3/MS_D2 P17 INS_MS
Pin 11 Pin 12 Pin 12 Pin 39 Pin 58 Pin 63 MS_D0 P18 DAT2_MS MS_D0 P18 DAT2_MS
SD_WP/MS_D1 P19 SDIO/DAT0_MS SD_WP/MS_D1 P19 SDIO/DAT0_MS
w
MS_BS P20 DAT1_MS P22 MS_BS P20 DAT1_MS P22

P21 BS_MS GND P23 P21 BS_MS GND P23
VSS_MS GND VSS_MS GND
SD UHS Mode Power Supply 3IN1 *3IN1
LAN_VDD33 VDD33/18 VDD33/18 VDD33/18 VDD33/18

VCC_CARD VCC_CARD VCC_CARD
C453 C413 C415 C458 C454

w
C281 R263 R262

0.1u_16V_Y5V_04 *4.7u_6.3V_X5R_06 0.1u_16V_Y5V_04 *4.7u_6.3V_X5R_06 0.1u_16V_Y5V_04
Pin 64 Pin 33 Pin 33 Pin 53 Pin 53 4.7u_6.3V_X5R_06 *150_06 *150_06
Close to Cardreader CONN

w
Card Reader (RTL8411) B - 25

Schematic Diagrams
SATA ODD, LED, USB CHARGE
m
BAT LED POWER ON LED
SATA ODD Zero Power ODD 28 LED_BAT_CHG LED_PWR 28
28 LED_BAT_FULL LED_ACIN 28
o
¹q®e½Ð¾aªñJ_ODD1 5VS_ODD 5VS
1
2
3
4
J_ODD1
S1 RN17
S2 C359 0.01u_16V_X7R_04 PJ23 *OPEN-3mm 220_8P4R_04
S3 SATA_TXP2 12 1 2
C357 0.01u_16V_X7R_04 Pin swap 3/30
SATA_TXN2 12
8
7
6
5
S4
S5 C356 0.01u_16V_X7R_04
S6 SATA_RXN2 12
C355 0.01u_16V_X7R_04 C339
S7 SATA_RXP2 12
U14
.c
¹s¥ó¸m©ó°T¸¹¤À¤ä³B 1 4 *1u_6.3V_X5R_04
1
VOUT VIN 5
VIN D8 D7
SG
SG
P1 2
Y
P2 SATA_ODD_PRSNT# 17 2 3
R306 *10mil_short_04 RY -SP155HYY G4-1 RY-SP155HY YG4-1
P3 SATA_ODD_DA# 16 GND EN SATA_ODD_PWRGT 17
2
P4 *G5243A
GND2 P5 R301 6-52-55002-04B 6-52-55002-04B
GND1 P6 C348 C350 C353 C345 + C341 6-52-55001-040 6-52-55001-040
*100K_04 6-52-55002-042 6-52-55002-042
203601-1 *0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 1u_6.3V_X5R_04 10u_6.3V_X5R_06 *220u_6.3V_6.3*4.2
PIN GND1~4=G ND
x
3.3VS
3/23 Pin swap 3/30

WLAN/BT
Sheet 25 of 42
1
2
3
4
HDD LED RN18
220_8P4R_04
LED
fi
SATA ODD, LED,
8
7
6
5
A
USB CHARGE
3
D6
USB Charge PORT ¹s¥ó¸m©ó°T¸¹¤À¤ä³B D9 1 3
SG
RY -SP170Y G34-5M
Y
USB_PN1 R266 *0_04 USB1_PN1 RY-SP155HYY G4-1 2 4
USB1_PN1 23
USB_PP1 R267 *0_04 USB1_PP1
USB1_PP1 23
4
C
VDD5 SATA_LED#
12 SATA_LED#
a
W/O USB CHARGE »Ý¤W¥ó
C
VDD5 USBVCC2
BT_EN B WLAN_LED#
17
21,28 BT_EN WLAN_LED# 21
R427 U26
C443 *10u_6.3V_X5R_06 1 12 Q7
PPAD
*10K_04 IN OUT DTC114EUA
E
USB_PN1 2 11 USB1_PN1
16 USB_PN1 DM_O DM_IN
TPS254X_ILIM_SEL
USB_PP1 3 10 USB1_PP1
16 USB_PP1 DP_O DP_IN
in
R433 TPS254X_ILIM_SEL 4 14 4/2
ILIM_SEL GND
*0_04 R438 *10K_04 5 16 R407 *24K_1%_04
VDD5 EN/DSC ILIM0 To South Bridge OC Pin.
R439 *10K_04 6 15 R408 *40.2K_04 ¤£±µOC PinR
28,29,30 DD_ON
R440 *10K_04 7
CTL1
CTL2
ILIM1
NC
9 ¥i·L½Õ ¤£¤W¥ó.
USBVCC03
100 MIL
5V
100 MIL FOR AUDIO BOARD
R268 *10K_04 8 13 G_OC#01 R410 *0_04
CTL3 FAULT# USB_OC#01 16,23
R269 *10K_04 VDD5 C383 C382 C286 C283
VDD5
*TPS2540A R409 *10K_04 22u_6.3V_X5R_08 *0.1u_16V_Y 5V_04 USBVCC03
R441 *10K_04 M_PQFP16 *0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
VDD5
1.1A 60mils
TI«ØÄ³§ó§ï¨Ï¥Î,
Ãö¾÷¥R¹q
h ILIM_SEL
( FOR TPS2543/TPS2540 ¦³¤£¦P)
ILIM_SEL=HI , FOR TPS2543
ILIM SEL=LOW, FOR TPS2540A
27 MIC1-R
27 MIC1-L
C263 *0.01u_16V_X7R_04
MIC1-R
MIC1-L
HEADPHONE-RR
J_AUDIO1
1
2
3
4
5
.c
27 HEADPHONE-R R374 *15mil_short_06
R379 *15mil_short_06 HEADPHONE-LL 6
27 HEADPHONE-L 7
(DD_ON) (VDD5) (VDD5) 27 JD_SENSE 8
27 JD_SENSE_B 9
CTL1 CTL2 CTL3 3/27 16 USB_PN9
USB_PN9
10
USBVCC03 USB_PP9
16 USB_PP9 11
J_AUDIO2 12
C487 *0.01u_16V_X7R_04 27 SPKOUTR+_R L37 FCM1005KF-121T03
L38 FCM1005KF-121T03 13
Mode 1 Pow er off & Discharge 0 0 0 1 27 SPKOUTR-_R 14
2 USB_PN10 16
USB_PP10 16 C485 85201-14051-01
3 C484 180p_50V_NPO_04 PCB Footprint = 85201-14x5_r
4 1000p_50V_X7R_04 C483
*85201-04051 3/28 EMI Require 180p_50V_NPO_04
3/23
Mode 2 Pow er off & Charge 0 1 1 W550EU
w
Close to J_AUDIO1 R256

*28mil_short_06
USBVCC03
U21 2A
R372 *0_04 5 6
13,16 USB_OC#89 FLG# VOUT1
Mode 3 Pow er off & Charge 1 0 1 2A 2 7
5V C264 C262
VIN1 VOUT2
C377 3 8 *0.1u_16V_Y5V_04 22u_6.3V_X5R_08
VIN2 VOUT3
4 1
w
1u_6.3V_X5R_04
EN# GND
Mode 4 Pow er on & Charge 1 1 1 SY 6288DCAC
23,29,32 DD_ON#
Change MSO8 4/2
w
B - 26 SATA ODD, LED, USB CHARGE

Schematic Diagrams
HDMI, RJ45
m
FOR W/O LEVEL SHIFT RN16
*0_8P4R_04_SHORT
LAN PORT 3.3VS

HDMIC_C0CP_C
HDMIC_C0CN_C
HDMIC_C1CP_C
8
7
6
5
1
2
3
4
TMDS_DATA2-L
TMDS_DATA2#-L
TMDS_DATA1-L
L27 HDMIC_C1CN_C TMDS_DATA1#-L
3/23
o
LAN_MDIN0 12 13 LMX1- Q16A RN15
24 LAN_MDIN0
2
LAN_MDIP0 11 TD4- MX4- 14 LMX1+ MTDK5S6R *0_8P4R_04_SHORT
G
24 LAN_MDIP0 LAN_MDIN1 9 TD4+ MX4+ 16 LMX2- LMX1+ 1 2 DLMX1+ HDMIC_C2CP_C 8 1 TMDS_DATA0-L
24 LAN_MDIN1 LAN_MDIP1 8 TD3- MX3- 17 LMX2+ HDMI_CTRLCLK 1 6 HDMI_SCL-C HDMIC_C2CN_C 7 2 TMDS_DATA0#-L
24 LAN_MDIP1 TD3+ MX3+ LMX1- 4 3 DLMX1- HDMIC_CLKCP_C 6 3 TMDS_CLOCK-L
VDD10 5 4
D
HDMIC_CLKCN_C TMDS_CLOCK#-L
LAN_MDIN2 6 19 LMX3- L26 *WCM2012F2S-SHORT 3.3VS
24 LAN_MDIN2 LAN_MDIP2 5 TD2- MX2- 20 LMX3+
24 LAN_MDIP2 LAN_MDIN3 3 TD2+ MX2+ 22 LMX4-
.c
R10 Q16B RN14
24 LAN_MDIN3
5
LAN_MDIP3 2 TD1- MX1- 23 LMX4+ MTDK5S6R *0_8P4R_04_SHORT
G
24 LAN_MDIP3 TD1+ MX1+ LMX2+ 1 2 DLMX2+ TMDS_DATA2-L 8 1 TMDS_DATA2-R
*0_04 TCT4 10 15 NMCT_4 R8 75_04 NMCT_R HDMI_CTRLDATA4 3 HDMI_SDA-C TMDS_DATA2#-L 7 2 TMDS_DATA2#-R
TCT3 7 TCT4 MCT4 18 NMCT_3 R7 75_04 LMX2- 4 3 DLMX2- TMDS_DATA1-L 6 3 TMDS_DATA1-R
4 TCT3 MCT3 21 5 4
D
TCT2 NMCT_2 R3 75_04 TMDS_DATA1#-L TMDS_DATA1#-R
TCT1 1 TCT2 MCT2 24 NMCT_1 R2 75_04 L2 *WCM2012F2S-SHORT
TCT1 MCT1 RN13
NS892402 C297 *0_8P4R_04_SHORT
C16 C8 C10 C9 TMDS_DATA0-L 8 1 TMDS_DATA0-R
1000p_2KV_X7R_12_H125 3.3VS TMDS_DATA0#-L 7 2 TMDS_DATA0#-R
LMX3+ 1 2 DLMX3+ TMDS_CLOCK-L 6 3 TMDS_CLOCK-R
0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04
TMDS_CLOCK#-L 5 4 TMDS_CLOCK#-R
LMX3- 4 3 DLMX3-
C
J_RJ1
x
DLMX1+ 1 GND1 L1 *WCM2012F2S-SHORT Q5 B R228 HDMI_HPD-C 3/23
DLMX1- 2 DA+ shield GND2 3.3VS
DLMX2+ 3 DA- shield *2N3904 *200K_1%_04
E
DLMX2- 6 DB+ HDMI_HPD
DB- LMX4+ 1 2 DLMX4+
DLMX3+
DLMX3-
4
5 DC+
LMX4- 4 3 DLMX4- R227 R237 Sheet 26 of 42
fi
G
DLMX4+ 7 DC- L28 *WCM2012F2S-SHORT *10K_04 1M_04 Q6
DLMX4- 8 DD+
DD-
130451-0M
4/5 HDMI_HPD S
MTN7002ZHS3
D HDMI_HPD-C HDMI, RJ45
Main 6-21-B4060-008 R241 20K_1%_04
¦pªG¦³¤Wlevel shift, R241-n§ï¬°100K
FOR INTEL GRAPHIC
a
5VS_HDMI
For ESD
FOR TI1442R3.5 HDMI CONNECTOR
C
A
A
¹w¯d2.2K¹ï¦a,¤£¤W¥ó R355 R352
U7
2.2K_04 2.2K_04
3/28
15 HDMIC_C0CN C237 0.1u_10V_X7R_04 HDMIC_C0CN_C 39 22 TMDS_DATA2#-R D16 D17 D14
in
AC
AC
AC
C236 0.1u_10V_X7R_04 HDMIC_C0CP_C 38 IN_D1+ OUT_D1+ 23 TMDS_DATA2-R 5VS D2 5VS_HDMI
15 HDMIC_C0CP IN_D1- OUT_D1- RB551V-30S2 *BAV99 RECTIFIER *BAV99 RECTIFIER
15 HDMIC_C1CN C239 0.1u_10V_X7R_04 HDMIC_C1CN_C 42 19 TMDS_DATA1#-R A C 5VS_HDMI_INR111 1_04 *BAV99 RECTIFIER
C238 0.1u_10V_X7R_04 HDMIC_C1CP_C 41 IN_D2+ OUT_D2+ 20 TMDS_DATA1-R J_HDMI1 HDMI_SCL-C
15 HDMIC_C1CP IN_D2- OUT_D2- C12822-100A
15 HDMIC_C2CN C241 0.1u_10V_X7R_04 HDMIC_C2CN_C 45 16 TMDS_DATA0#-R HDMI_SDA-C
C240 0.1u_10V_X7R_04 HDMIC_C2CP_C 44 IN_D3+ OUT_D3+ 17 TMDS_DATA0-R
15 HDMIC_C2CP IN_D3- OUT_D3- C167 C164 HDMI_HPD-C
15 HDMIC_CLKCN C243 0.1u_10V_X7R_04 HDMIC_CLKCN_C 48 13 TMDS_CLOCK#-R
C242 0.1u_10V_X7R_04 HDMIC_CLKCP_C 47 IN_D4+ OUT_D4+ 14 TMDS_CLOCK-R *10u_6.3V_X5R_06 22u_6.3V_X5R_08
15 HDMIC_CLKCP IN_D4- OUT_D4- 19
R369 *2.2K_04 HDMI_HPD-C
HDMI_CTRLCLK 9 28 HDMI_SCL-C 18 HOT PLUG DETECT
15 HDMI_CTRLCLK SCL SCL_SINK +5V
15 HDMI_CTRLDATA HDMI_CTRLDATA 8 29 HDMI_SDA-C 17
SDA SDA_SINK HDMI_SDA-C 16 DDC/CEC GND
SDA
15 HDMI_HPD
FOR
R3.5
3.3VS
3.3VS
R211
TI1442»Ý-×§ï499-->3.4K
R205
R360
R222
*4.7K_04
*0_04
*4.7K_04
*499K_1%_04
OE#
DCC_EN#
REXT
25
32
7
6
HPD/HPDX
OE#
DCC_EN
REXT
HPD_SINK
VCC[1]
VCC[3]
VCC[4]
VCC[5]
VCC[7]
VCC[8]
30
2
15
21
26
40
46
HDMI_HPD-C
C202 C385 C379 C374 C384
*0.1u_16V_Y5V_04
h 3.3VS
*0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
TMDS_CLOCK#-R
TMDS_CLOCK-R R156
R145 *10mil_short_04 TMDS_CLOCK# 12
*10mil_short_04 TMDS_CLOCK 10
14
8
RESERVED
TMDS CLOCK-
TMDS CLOCK+
SHIELD0
SCL
CEC
CLK SHIELD
TMDS DATA0-
15
13
11
7
HDMI_SCL-C
HDMI_CEC
TMDS_DATA0#
TMDS_DATA0
R169
R179
*10mil_short_04 TMDS_DATA0#-R
*10mil_short_04 TMDS_DATA0-R
.c
11 APD/VCC R191 *4.7K_04 TMDS_DATA1#-R R190 *10mil_short_04 TMDS_DATA1# 6 TMDS DATA0+
3 VCC[2]/APD 3.3VS TMDS DATA1- 5
R221 *4.7K_04 PC0 R196 *4.7K_04 R3.5
3.3VS PC0/PEQ 4 SHIELD1
R220 *4.7K_04 TMDS_DATA1-R R195 *10mil_short_04 TMDS_DATA1
33 TMDS DATA1+ 3
R141
R157
R189
R194
EMI1/VCC R226 *4.7K_04 TMDS_DATA2# R204 *10mil_short_04 TMDS_DATA2#-R
4 VCC[6]/EMI1 3.3VS 2 TMDS DATA2-
R217 *4.7K_04 PC1 R364 *4.7K_04 3/23
3.3VS PC1/PIO SHIELD2 1
R216 *4.7K_04 TMDS_DATA2 R210 *10mil_short_04 TMDS_DATA2-R
27 EMI0/GND R214 *4.7K_04 TMDS DATA2+
34 GND[6]/EMI0 3.3VS
R230 *4.7K_04 DDCBUF_EN R363 *4.7K_04 5VS 3/23
3.3VS DDCBUF_EN/DDCBUF
R209
R203
R178
R168
R365 *4.7K_04
12
680_04
680_04
680_04
680_04
RS/GND R186 *4.7K_04
G
35 GND[3]/Reserv ed1 1 3.3VS

R236 *4.7K_04 PRE/CFG R185 *0_04
3.3VS CFG/PRE GND[1]/Reserv ed0 5
R366 *4.7K_04
GND[2] 18 PS8101»PPS8171®t²§ S D HDMIGND
C199 *2.2u_6.3V_X5R_04 CEXT/RT_EN# 10 GND[4] 24
RT_EN#/CEXT GND[5]
w
31
680_04
680_04
680_04
680_04
Q17
GND[7] 36 MTN7002ZHS3
PS8101»PPS8171®t²§ GND[8] 37
GND
HPDX: Output level and polarity of HPD is defined by PIO GND[9] 43 APD: Automatic power down managementl, 3 level CMOS input,
GND[10]
PIO=LOW: [email protected] CMOS output internal pull-up at ~ 500k ohm
PIO=High: HPD=HPD_SINK#(inverted HPD)@0.9V *PS8171QFN48GTR APD=LOW: Automatic power down disable HDMIGND
49
PIO: Internal pull down ~ 500k ohm APD=High: Automatic power down enable
PIN 49=GND
PEQ: TMDS iutput equalization control, 3 level CMOS input, APD=MID: Reserved
EMI0,EMI1: EMI reduction and filter setting, 3 level CMOS input,
internal pull-down at ~ 500k ohm ¦¹°Ï¶ô,W/ LEVELSHIFT®É¤W¥ó EMI1 internal pull-up at ~ 500k ohm
w
PEQ=LOW: Mid level EQ(Default)

PEQ=High: High level EQ EMI0 internal pull-down at ~ 500k ohm
DDCBUF: DDC Active Buffer enable and setting, 3 level CMOS input,
PEQ=MID: Low level EQ [EMI1,EMI0]=HL: No EMI reduction
internal pull-down at ~ 500k ohm
PRE: TMDS output driver pre-emphasis level setting, EMI0=High: Increased rise/fall time
DDCBUF=LOW: No DDC active buffer, passive DDC level shifting
3 level CMOS input, internal pull-down at ~ 500k ohm MID, Increased rise/fall time,2nd
DDCBUF=High: Active DDC bufer enable, setting 1
PRE=LOW: No pre-emphasis EMI1=LOW: EMI filter setting 1
DDCBUF=MID: Active DDC bufer enable, setting 2
MID: Reserved
w
HDMI, RJ45 B - 27
Schematic Diagrams
AUDIO CODEC VT1802P
m
CODEC (ALC269 & VT1802P) PVDD1_2 R400
*15mil_short_06
La yout note:
1.5V
R452 *0_06 5VS GND and AUDG space is EMI Require
For 1.5V HDA Link. 3/23 DVDD_IO C431 C425 60m ils ~ 100mils
20 mil L36 *HCB1005KF-121T20
o
R420 *28mil_short_06 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06
3.3VS_AUD
JP1 *10mil_short_04
For 3.3V HDA Link. C464 C463
JP2 *10mil_short_04
10u_6.3V_X5R_06 0.1u_16V_Y5V_04 VT1802P L25 ,C704¤£¤W¥ó
C461 0.1u_16V_Y5V_04
C437 C427 ALC269VB L25,C704 -n¤W¥ó
C479 0.1u_16V_Y5V_04
PULL HIGH 3.3VS_AUD FOR VT1802P 0.1u_16V_Y5V_04 10u_6.3V_X5R_06
.c
PULL HIGH 5VS_AUD FOR ALC269VB 3.3VSHCB1005KF-121T20
L33 3.3VS_AUD
5VS_AUD L35 5VS
PD# Control AZ_RST# For 3.3V *HCB1005KF-121T20 AUDG
HDA Link De -pop C444 C434 C438

5VS_AUD 3.3VS_AUD C440 C470 C441 C476 C482
D20 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06 0.1u_16V_Y 5V_04
1 A 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 10u_6.3V_X5R_06 10u_10V_Y 5V_08 *1u_6.3V_Y5V_04
12 HDA_RST# C 3 INT_MIC_OUT
R425 R426
2 A AUDG_R INT_MIC_OUT 22
4/2 ANALOG DIGITAL
28 KBC_MUTE# AUDG_R 22
*10K_04 10K_04 C488 *100p_50V_NPO_04
39
46
25
38
1
9
BAT54AS3 U27 AUDG AUDG
Close to Codec
DVDD1
DVDD-IO
PVDD1
PVDD2
AVDD1
AVDD2
EAPD_MODE C A PD# 4 13 SENSE_A R460 20K_1%_04
x
PD# Sense A JD_SENSE 25
VT1802P
D
D18 *RB751S-40C2 14 LINE2-L R466 39.2K_1%_04
SPKOUTL+ 40 LINE2-L 15 LINE2-R JD_SENSE_B 25
MIC2-VREFO R4533.3K_04
Q18 3.3K_1%_04
R454 *100K_04 G *2N7002W SPKOUTL- 41 SPK-L+ LINE2-R *10mil_short_04 J_INTMIC1
5VS_AUD SPK-L-
VT1802P 10u
16 MIC2_L C472 10u_6.3V_X5R_06 INT_MIC INT_MIC R456 1K_04 R471 INT_MIC_OUT
Sheet 27 of 42
S
44 MIC2-L 17 MIC2_R C473 10u_6.3V_X5R_06 AUDG_R 2
25 SPKOUTR-_R 45 SPK-R- MIC2-R 1
Q23 C480 VT1802P R472 *10mil_short_04
HDA_RST# G 25 SPKOUTR+_R SPK-R+ 18 SENSE-B
*BSS138_NL C466 *85205-02701
fi
100K_04 EAPD_MODE 47 Sense-B VT1802P 5.1K_1%_04 100P 100p_50V_NPO_04
AUDIO CODEC AZ_RST# For 1.5V 3.3VS_AUD R412 0.022u_16V_X7R_04
S
48 SPDIFC2/EAPD 19 JDREF R463 5.1K_1%_04
SPDIFO JDREF
3/23
HDA Link De -pop MONO-OUT
20 MONO-OUT C481 100p_50V_NPO_04
Very close to DMIC-DAT 2
3 GPIO0-DMIC-DAT 21
VT1802P
DMIC-CLK MIC1-L_R C474 10u_6.3V_X5R_06 MIC1_L AUDG
Layout Note: Audio Codec GPIO1-DMIC-CLK MIC1-L 22 MIC1-R_R C475 10u_6.3V_X5R_06 MIC1_R AUDG R450
R442 33_04 MIC1-R
12 HDA_SDIN0 DIGITAL ANALOG 23 LINE1-L VT1802P 10u
µøLAYOUTª¬ªp, ¦p¤Ó»·¥i¼u©Ê *0_04
5 LINE1-L 24 LINE1-R C469 0.1u_10V_X7R_04
12 HDA_SDOUT SDATA-OUT LINE1-R ÃB¥~¤Á¤@GROUND¦A»PGND³s±µ
VT1802P 10u
6 27 VREF-ALC269 C465 10u_6.3V_X5R_06
a
12 HDA_BITCLK BIT-CLK VREF
AZ_SDIN0_R 8 28 LDO_CAP C467 *10u_6.3V_X5R_06
12 HDA_SY NC SDATA-IN LDO_CAP 30 MIC1-VREFO-R
VT1802P NC PIN Close to Codec
10 MIC1-VREFO-R 29 MIC2-VREFO MIC1_R R449 75_1%_04
SYNC MIC2-VREFO MIC1_L MIC1-R 25
D19 FOR VOLUMN R445 75_1%_04
PC BEEP BAT54CS3 HDA_RST# 11 32 HEADPHONE-L MIC1-L 25
1 A ADJUST RESET# HP-OUT-L 33 HEADPHONE-R HEADPHONE-L 25
AUDG C462 C460
28 KBC_BEEP HP-OUT-R HEADPHONE-R 25
MIC1-VREFO-L
C 3 BEEP R467 10K_04 BEEP_R PCBEEP 12
2 A PCBEEP 35 CBN-AL269 C445 2.2u_6.3V_X5R_06 *0.022u_16V_X7R_04
in
12 HDA_SPKR CBN
R461 5.1K_04 C478 1u_6.3V_X5R_04 AUDG *0.022u_16V_X7R_04
36 CBP-ALC269
DVSS2
PVSS1
PVSS2
AVSS1
AVSS2
C477 100p_50V_NPO_04 CBP 34 OPVEE-ALC269 MIC1-VREFO-L R443 4.7K_1%_04
GND
OPVEE MIC1-VREFO-R R446 4.7K_1%_04
C455
49
42
43
26
37
31
FOR VT1802P VT1802P_A3
2.2u_6.3V_X5R_06
Very close to Audio Codec

C459 22p_50V_NPO_04 HDA_SDIN0 R459 *1M_04 MIC2_L R457 AUDG
AUDG
MIC1-VREFO-L
C456 22p_50V_NPO_04 HDA_SDOUT R462 *1M_04 MIC2_R *0_04
AUDG The rma l Pad pla ce 9
C468
C471
22p_50V_NPO_04
22p_50V_NPO_04
3.3VS_AUD
HDA_SY NC
HDA_RST#
AUDG
AUDG
R464
R465
h
*1M_04
*1M_04
MIC1-L_R
MIC1-R_R
Via hole.
VT1802P±µAUDGAUDG
ALC269 ±µ GND
·í½T»{¤£·|ÅÜ§ó«á,¥i§ïSHORT¹s¥ó
4/2
.c
Headphone Anti-Pop Circuit
3.3VS HEADPHONE-L
5VS HEADPHONE-R
20m s
6
L21 D
AZ_RST# FCM1005KF-121T03 R406 R434 Q21A
SPKOUTL+ SPKOUTL+_L *220K_04 2G *MTDK5S6R
S
1
C278 C280 *10K_04
S
EAPD_MODE G Q22
PD#
3
1000p_50V_X7R_04 180p_50V_NPO_04 *NDS352AP AUDG D
LEFT J_SPKL1 R436 R428 Q21B
w
5G *MTDK5S6R
D
SPKOUTL- SPKOUTL-_L 1 S
Spe a ke r wire length less than 8000mils , It don't ne e d LC Filte r.
4
2 *4.7K_04 *10K_04
SPKOUTR+,R-,L+,L- Trace w idth L19 C274 C442
FCM1005KF-121T03 85204-02001 *10u_6.3V_X5R_06
Spe a ke r 4 ohm------> 40mils 180p_50V_NPO_04 AUDG
J_SPK1
Spe a ke r 8 ohm------> 20mils EMI Require 2 1 AUDG
Ple ase Le t LC Filte r toge the r and close to Code c.IF

w
Spe aker w ire le ngth is less tha n 8000mils It don't La yout note :
ne ed the LC Filter. Close to code c
w
B - 28 AUDIO CODEC VT1802P

Schematic Diagrams
KBC-ITE IT8518E
m
KBC_AVDD L10
HCB1005KF-121T20
VDD3
VDD3 VDD3
C158 C159 C160 C185 C203
C174 C173 C165
0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04 10u_6.3V_X5R_06 0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04
0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04
o
R155
C172
100K_04
0.1u_16V_Y5V_04 KBC_AGND
L9 *28mil_short_06 EC_VCC KBC_WRESET#
3.3VS
3/23 C178
121
114
127
J_KB1
11
26
50
92
74
3
U5 85208-24051 1u_6.3V_X5R_04
.c
VSTBY
VSTBY
VSTBY
VSTBY
VBAT
VSTBY
VSTBY
VCC
AVCC
10 58 KB-SI0 4 1 J_KB1 24
12,22 LPC_AD0 9 LAD0 KSI0/STB# 59 KB-SI1 5
12,22 LPC_AD1 8 LAD1 KSI1/AFD# 60 KB-SI2 6
12,22 LPC_AD2 7 LAD2 KSI2/INIT# 61 KB-SI3 8
12,22 LPC_AD3 PCLK_KBC 13 LAD3 KSI3/SLIN# 62 KB-SI4 11
16 PCLK_KBC 6 LPCCLK KSI4 63 KB-SI5 12
12,22 LPC_FRAME# 5 LFRAME# KSI5 64 KB-SI6 14
12,22 SERIRQ 22 SERIRQ LPC K/B MATRIX KSI6 65 KB-SI7 15
EC MODULE CHOOSE (FOR DIFFERENCE K/B TYPE)
16,21,24 BUF_PLT_RST# LPCRST#/WUI4/GPD2( PU ) KSI7
KBC_WRESET# 14 36 KB-SO0 1 VER. RX VOLTAGE MODEL_ID
WRST# KSO0/PD0 37 KB-SO1 2
126 KSO1/PD1 38 KB-SO2 3
17 GA20 GA20/GPB5 KSO2/PD2
V1.0 R151 10K/ R150 X 3.3V
4 39 KB-SO3 7
35 AC_IN# 16 KBRST#/GPB6( PU ) KSO3/PD3 40 KB-SO4 9
x
25 LED_ACIN PWUREQ#/GPC7( PU ) KSO4/PD4
R151 X /R150 10K 0V
20 41 KB-SO5 10
14,16 AC_PRESENT L80LLAT/GPE7( PU ) KSO5/PD5 42 KB-SO6 13
23 KSO6/PD6 43 KB-SO7 16
16,17 SMI# 15 ECSCI#/GPD3( PU ) KSO7/PD7 44 KB-SO8 17 MODEL_ID R151 10K_04
17 SCI# ECSMI#/GPD4( PU ) KSO8/ACK# 45 KB-SO9 18 VDD3
21 WLAN_EN
76
77
DAC
GPJ0
KSO9/BUSY
KSO10/PE
KSO11/ERR#
46
51
52
KB-SO10
KB-SO11
KB-SO12
19
20
21
R150
RX
*10K_04
Sheet 28 of 42
fi
27 KBC_MUTE# 78 GPJ1 KSO12/SLCT 53 KB-SO13 22
12
22
ME_WE
CPU_FAN
29,30 USB_CHARGE_EN
R112 *0_04
79
80
81
DAC2/GPJ2
DAC3/GPJ3
DAC4/GPJ4 IT8518
KSO13
KSO14
KSO15
54
55
KB-SO14
KB-SO15
23
24 VDD3 KBC-ITE IT8518E
17 CRIT_TEMP_REP# DAC5/GPJ5 3G_DET# R166 *10K_04
ADC 6-03-08518-0P2
FLASH CCD_DET# R167 10K_04
BAT_DET 66 100
35 BAT_DET BAT_VOLT 67 ADC0/GPI0 FLFRAME#/GPG2 101 KBC_SPI_CE# 3G_POWER_EN 21 SMC_CPU_THERM_R R90 43_1%_04
35 BAT_VOLT 68 ADC1/GPI1 FLAD0/SCE# 102 KBC_SPI_SI SMC_CPU_THERM_R H_PECI 3,17,29
R88 *0_04
69 ADC2/GPI2 FLAD1/SI 103 KBC_SPI_SO SMD_CPU_THERM_R SMC_CPU_THERM 13
R91 *0_04
2 THERM_VOLT 70 ADC3/GPI3 FLAD2/SO 104 SMD_CPU_THERM 13
R181 10_04 TOTAL_CUR_R
35 TOTAL_CUR SUS_PWR_ACK 14
a
71 ADC4/GPI4 FLAD3/GPG6 105 KBC_SPI_SCLK
21 3G_DET# CCD_DET# 72 ADC5/GPI5 FLCLK/SCK 106
MODEL_ID 73 ADC6/GPI6 ( PD )FLRST#/WUI7/GPG0/TM CCD_EN 22 PCLK_KBC PCLK_KBC_R
R144 *10_04 C176 *10p_50V_NPO_04
ADC7/GPI7 BAT_VOLT C192 1u_6.3V_X5R_04
GPIO 56
110
SMBUS ( PD )KSO16/GPC3 57 SUSB# 6,14,29 TOTAL_CUR_R C184 1u_6.3V_X5R_04
35 SMC_BAT_R 111 SMCLK0/GPB3 ( PD )KSO17/GPC5 SUSC# 14,32
35 SMD_BAT_R SMC_VGA_THERM 115 SMDAT0/GPB4 93
SMD_VGA_THERM 116 SMCLK1/GPC1 ( PD )GPH0/ID0 94 USB_CHARGE_EN 29,30 VDD3
in
SMC_CPU_THERM_R 117 SMDAT1/GPC2 ( PD )GPH1/ID1 95 BT_EN 21,25
SMD_CPU_THERM_R 118 SMCLK2/GPF6( PU ) ( PD )GPH2/ID2 96 BKL_EN 11
SMDAT2/GPF7( PU ) ( PD )GPH3/ID3 97 HSPI_CE# 12
NC2
( PD )GPH4/ID4 98 HSPI_SCLK 12
LCD_BRIGHTNESS 24
PWM ( PD )GPH5/ID5 99 HSPI_MSO 12
SHORT KBC_SPI_*_R = 0.1"~0.5"
25 PWM0/GPA0( PU ) ( PD )GPH6/ID6 107 HSPI_MSI 12
0.1u_16V_Y 5V_04
27 KBC_BEEP LED_SCROLL# 28 PWM1/GPA1( PU ) ( PD )GPG1/ID7 DD_ON 25,29,30
C358
64Mbit
LED_NUM# 29 PWM2/GPA2( PU ) U16
30 PWM3/GPA3( PU ) EXT GPIO 82 8 5
LED_CAP# AC_DET SPI_VDD_1 KBC_SPI_SI_R R307 47_04 KBC_SPI_SI
31 PWM4/GPA4( PU ) ( PD )EGAD/GPE1 83 dGPU_RST# VDD SI
25 LED_BAT_CHG 32 PWM5/GPA5( PU ) ( PD )EGCS#/GPE2 84 2 KBC_SPI_SO_R R303 15_1%_04 KBC_SPI_SO
25 LED_BAT_FULL 34 PWM6/GPA6( PU ) ( PD )EGCLK/GPE3 H_PROCHOT#_EC 3 SO
25 LED_PWR PWM7/GPA7( PU ) R302 1K_04 KBC_FLASH 3 1 KBC_SPI_CE#_R R304 15_1%_04 KBC_SPI_CE#
WAKE UP 35 WP# CE#
PS/2 ( PD )WUI5/GPE5 RSMRST# 14
21
21
21
80CLK
BT_DET#
3IN1
14 SY S_RESET#
22
22
21
TP_CLK
TP_DATA
3G_EN
R354 *0_04
85
86
87
88
89
90
125
PS2CLK0/GPF0(
PS2DAT0/GPF1(
PS2CLK1/GPF2(
PS2DAT1/GPF3(
PS2CLK2/GPF4(
PS2DAT2/GPF5(
WAKE UP
PU
PU
PU
PU
PU
PU
)
)
)
)
)
)
( PD )LPCPD#/WUI6/GPE6
PWM/COUNTER
( PD )TACH0/GPD6
( PD )TACH1/GPD7
( PD )TMRI0/WUI2/GPC4
( PD )TMRI1/WUI3/GPC6
17
47
48
120
124
h KBC_RST# 17
CPU_FANSEN 22
PM_PCH_PWROK 14
ALL_SY S_PWRGD 11,14,29,33
R309 4.7K_04 KBC_HOLD# 7
HOLD#
SCK
VSS
6
MX25L6406EM21-12G
6-04-25640-490
KBC_SPI_SCLK_R R308 47_04 KBC_SPI_SCLK
.c
PWRSW/GPE4( PU )
18
CIR 119
29 PWR_SW# RI1#/WUI0/GPD0( PU ) ( PD )CRX/GPC0
3/23 VCORE_PWRGD 14 Co-lay SPI ROM
21 123
11,23 LID_SW# RI2#/WUI1/GPD1( PU ) ( PD )CTX/GPB2 PME# 16
*10mil_short_04 U15
LAN_PCIE_WAKE# 24 SPI_VDD_1 8 5 KBC_SPI_SI_R
GP INTERRUPT LPC/WAKE UP R82
33 19 VDD SI
14 PWR_BTN# GINT/GPD5( PU ) ( PD )L80HLAT/GPE0 SWI# 14 2 KBC_SPI_SO_R
112 SO
( PD )RING#/PWRFAIL#/LPCRST#/GPB7 PMOSFET_ CONTROL# 35 KBC_FLASH 3 1 KBC_SPI_CE#_R
108
UART WP# CE#
R96 *0_04 CLOCK
21 WLAN_CON_POWER 109 RXD/GPB0( PU ) 2 6
AVSS
CK32KE R94 *0_04 KBC_SPI_SCLK_R

VSS
VSS
VSS
VSS
VSS
VSS
21 WLAN_DET# NB_ENAVDD 11,15

VSS
TXD/GPB1( PU ) CK32KE 128 CK32K R86 *0_04 SCK

CK32K ICPPE# 17 KBC_HOLD# 7 4
IT8518E/HX HOLD# VSS
1
75
12
27
49
91
113
122
*MX25L3205DM2I-12G
R95 ACA-SPI-004-T03
R136 *0_04 EC_VSS *10mil_short_04
C175 0.1u_16V_Y5V_04
NC1 SHORT
w
R162 *10mil_short_04 LCD_BRIGHTNESS KBC_AGND

11 BRIGHTNESS
C183 *0.1u_16V_Y5V_04
w
KBC-ITE IT8518E B - 29
Schematic Diagrams
5VS, 3VS, 1.5VS CPU
m
VIN VA VIN1
PU7
1 8 PR97 100K_04 DD_ON
VA VIN1
2 7 DDON_LATCH PR96 *100K_04
o
VIN DD_ON_LATCH USB_CHARGE_EN 28,30
PR173 1K_04 3 6 PWR_SW#_R PR99 10K_04
22 M_BTN# M_BTN# PWR_SW# VDD3
USB_CHARGE_EN R331 *1K_04 4 5 PR98 1K_04
INSTANT-ON GND PWR_SW# 28
R332 *100K_04 P2808B0
.c
¹w¯dPJ17¡Acost down 5V MOS W USB Charge ¤W¥ó
WO USB Charge ¤£¤W¥ó
PJ16
2
*OPEN-3mm
1 3.3V
NMOS
VDD3
VIN VIN
3/23
5V
NMOS
SY S15V VDD3
8
PQ41A
MTNN20N03Q8
2
3.3V PR181
PC80 PC79
7 1 3A 100K_04
PQ11A
*0.01u_50V_X7R_04
*0.01u_50V_X7R_04
PR106 Power Plane
SY S15V VDD5 MTNN20N03Q8 5V DD_ON#
8 2 DD_ON# 23,25,32
1M_04 PC158 PR110 PC159
3A
6
x
7 1 *100_1%_04 D PC162
PR184 3.3V_EN1 10u_10V_Y5V_08
4
PQ41B *0.1u_16V_Y 5V_04 2G *0.1u_16V_Y 5V_04
25,28,30 DD_ON S PQ40A
1M_04 PC74 PC69 PR114 MTNN20N03Q8
D
3
1
PC64 MTDK5S6R
Sheet 29 of 42 5V_EN1 *10u_10V_Y 5V_08 5 PQ10 PR182
4
PQ11B *0.1u_16V_Y 5V_04 *100_1%_04 1000p_50V_X7R_04 DD_ON# G *MTN7002ZHS3
MTNN20N03Q8 100K_04 EMI
S
6
fi
PC72 PQ14 3/23
5VS, 3VS, 1.5VS 2200p_50V_X7R_04
5
DD_ON# G *MTN7002ZHS3 ON
ON
S
6
PJ15
CPU 2
*40mil ON
VDD3
PR105
5VS 3.3VS
a
10K_04
SUSB
ON NMOS SUSB 31,32
NMOS PQ42A
3
PQ40B D PC63
PQ12A SY S15V VDD3 MTNN20N03Q8 3.3VS MTDK5S6R
SY S15V VDD5 MTNN20N03Q8 5VS 8 2 5G *0.1u_16V_Y 5V_04
8 2 7 1 6,14,28 SUSB# S
4
7 1
PR183 PR109 PC66 PC67
in
PR107
10u_6.3V_X5R_06
*0.1u_16V_Y5V_04
1M_04 PC73 PC71 PR108 1M_04 75_04
3
*75_04
5VS_EN1 *0.1u_16V_Y 5V_04 3.3VS_EN1
10u_6.3V_X5R_06 ON ON
D 3.3VS_LO
4
PQ12B
D
PC70 MTNN20N03Q8 PC68

PQ9
3300p_50V_X7R_04 5 SUSB G *2SK3018S3 4700p_50V_X7R_04 C489 *0.01u_16V_X7R_04
3,14 H_PM_SY NC
4
PQ42B
S
1
MTNN20N03Q8 C490 *0.01u_16V_X7R_04

3,17,28 H_PECI
6
PJ14 PQ8
5 SUSB G 2SK3018S3 C491 *0.01u_16V_X7R_04
6,14,28 SUSB#
*40m il
S
2
C492 *0.01u_16V_X7R_04
3,17 H_SNB_IVB#
6
C493 *0.01u_16V_X7R_04
11,14,28,33 ALL_SY S_PWRGD
ON C494 *0.01u_16V_X7R_04
14,33 DELAY _PWRGD
ON
1.5VS_CPU 1.5VS VIN C495 *0.01u_50V_X7R_04
.c
C496 *0.01u_50V_X7R_04
1.5V 1.5VS_CPU C497 *0.01u_50V_X7R_04
NMOS 15A
PJ10 NMOS
PQ13
1 2 MTN2604G6 C498 *0.01u_16V_X7R_04
SY S15V 6 1.5VS 3.3VS
1.5V
SY S15V *OPEN-8mm 5
PQ36A PR171 PR112

2
1
4 200mA 3,17 H_CPUPWRGD C499
C500
0.01u_16V_X7R_04
*0.01u_16V_X7R_04
MTNN20N03Q8 C501 0.01u_16V_X7R_04
PR172 8 2 100_04 1M_04 PC76 PC77 PR113
7 1 3
D1.5VS_CPU_LO
100_04
10u_6.3V_X5R_08
0.1u_16V_Y5V_04
1M_04 1.5VS_EN1 C502 0.01u_16V_X7R_04
PC149 PC150 14,31 1.8VS_PWRGD
1.5VS_LO
w
3
1.5VS_CPUEN1 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06 C503 0.01u_16V_X7R_04

3,14 PM_DRAM_PWRGD
4
PQ36B
MTNN20N03Q8 PQ37 PC75 EMI Require EMI request 4/2
3
6
PC148 MTN7002ZHS3 D D PQ15A
5 SUSB G 2200p_50V_X7R_04 MTDK5S6R
2200p_50V_X7R_04 G5 SUSB 2G
S
S S
6
1
PQ15B
MTDK5S6R
w
ON ON
w
B - 30 5VS, 3VS, 1.5VS CPU

Schematic Diagrams
VDD3, VDD5
m
VREF_VDD
PR93 *0_04 PR90 *20mil_04

PC49
o
3/29 1u_10V_Y 5V_06
VFB2 VFB1
TONSEL
PR175 PR88 3/29
EN_3V EN_5V
PC151
110K_1%_04 110K_1%_04 PC152
.c
1000p_50V_X7R_04 1000p_50V_X7R_04
1
PU6
VREG3
EN2
TONSEL
VFB2
VFB1
EN1
VREF
VIN
VIN
7 24
PC59 PC58 VO2 VO1
PC153 PR176 *10K_04
4.7u_25V_X5R_08 4.7u_25V_X5R_08 8 23 5608POK
SY S5V
VDD3 1u_10V_Y 5V_06
PC155
LDO3 POK
PC154
PC56 PC61 PC57
VDD5
6
5
5
6
BOOT2 9 22 BOOT1 0.1u_50V_Y 5V_06 4.7u_25V_X5R_08 4.7u_25V_X5R_08
BOOT2 BOOT1
G5608
x
PQ39A 0.1u_10V_X7R_04 0.1u_10V_X7R_04 PQ38A
VDD3 4 UGATE2 10 21 UGATE1 4 SY S5V VDD5
SY S3V PL11 EMB17A03V UGATE2 UGATE1 EMB17A03V PL12
PJ13 5A TMPC0603H-4R7M-Z01 TMPC0603H-4R7M-Z01 3/23 5A 1 PJ12
3
3
2 1 2 1 PHASE2 11 20 PHASE1 1 2 2
PHASE2 PHASE1
Ra
Sheet 30 of 42
7
8
PR104
PC48 *1000p_50V_X7R_04
*OPEN-5mm PQ38B *OPEN-5mm
LGATE2 12 19 LGATE1 PR89
GND PAD
SKIPSEL
LGATE2 LGATE1
8
7
fi
PR103
2
VDD3, VDD5
LDO5
VCLK
PC65 + PC165 PR91 PC50 30K_1%_06
GND
EN0
VIN
0.1u_16V_Y 5V_04 *5.1_06
2
*5.1_06
220u_6.3V_6.3*6.3*4.2
100p_50V_NPO_04
13K_1%_06 EMB17A03V
PD8 PD7
1
Rb
13
25
16
18
14
15
17
PQ39B A C C A 4/3 + PC166 PC163
VREG5 VREG5
1
PR179 PR92
VIN_6182
220u_6.3V_6.3*6.3*4.2
EMB17A03V EN_ALL PC62 0.1u_16V_Y 5V_04
RB0540S2 RB0540S2
SKIPSEL
PR94 18.7K_1%_06
PC60
4/3 *680K_1%_04
20K_1%_04 PR178 PR177 M990125 *220p_50V_NPO_04
a
*220p_50V_NPO_04
PR101 PD9
VREF_VDD PR100 *20mil_04 *0_04 *20mil_04 *0_04 BAT54SS3
PR180 PC53 A 1
3 C SY S5V
VREG5 PR102 *0_04 2.2_06
A 2
SY S10V
0.01u_50V_X7R_04
VIN1 VREG5
PC55
PD10
PC157 PC156
in
C A PD6 2200p_50V_X7R_04
VIN
4.7u_25V_X5R_08 1u_10V_Y 5V_06 BAT54SS3
PC54 A 1
RB751V 3 C
A 2
SY S15V
0.01u_50V_X7R_04
PC52
2200p_50V_X7R_04
VREG5
EN_3V5V PR174 *0_04 EN_3V
PR95
10K_04
R101 EN_5V
*10mil_short_04
h
3
D
PQ6B
DD_ON_EN_VDD 5G MTDK5S6R
S
4
6
D
.c
1
2G PJ11 PC51 PR87

25,28,29 DD_ON S PQ6A *40mil
1
MTDK5S6R 100K_04
2
0.1u_16V_Y 5V_04
D
PQ7
G
w
35 AC_IN
*MTN7002ZHS3
S
Support Intel V-Pro Function

D
PQ5
w
G
28,29 USB_CHARGE_EN
*MTN7002ZHS3 For USB Charge
S
VDD3, VDD5 B - 31
Schematic Diagrams
Power 0.85VS, 1.8VS
m
-n²¾¾aªñPIN6¸}
3 .3V
PC147
5V
1.8VS
2A 5
PU5
6
2.2u_6.3V_X5R_06 V1.8
1.8VS
PR84 10K_04
3.3V
1.8VS_PWR GD
9
7
VIN
VIN
VCN TL
4
2A 1
PJ22
2
R56 *10mil_short_04 POK_6610
o
14,29 1.8VS_PWR GD POK VOUT
3 *OPEN -3mm
PR83 10K_04 EN1.8VS1 8 VOUT
5V EN PC142 PC 143 PC144
PC45 1 2 VFB_6610 PR85 1.3K_1%_04
D
GN D VFB
10u_6.3V_X5R _06
*10u_6.3V_X5R_06
0.1u_16V_Y5V_04
PQ35
2SK3018S3 *1u_6.3V_Y 5V_04
PR82 1M_04 EN1.8VS G AX6615ESA PC47 82p_50V_NPO_04
.c
29,32 SUSB
S
PC145 PC146
PC46
0.1u_16V_Y 5V_04 10u_6.3V_X5R_06
2200p_50V_X7R_04 PR86
6-02-06615-320 1K_1%_04
6-02-07113-320 Vout= 0.8*(PR73+PR72)/PR72=1.84V
x
VIN
PR48 PR54
9.31K_1%_04 9.31K_1%_04 SS_0.85VS 3.3V 0.85VS_PWR GD 14
Sheet 31 of 42
4.7u_25V_X5R_08
4.7u_25V_X5R_08
0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PR 62 5V
fi
PC125
Power 0.85VS,
0.022u_16V_X7R _04
PR49 PR55 *20mil_04
12K_1%_04 10K_1%_04
A
PR65
1.8VS PR 160
10K_04 PD15
R B0540S2
PC129
PC128
PR50 PR56 100_04
PC 32
PC 33
C
9.1K_1%_04 10.7K_1%_04
EAP_0.85VS
a
BOOT_0.85VS
1
2
PR51 PR57
PC 130
PC126
PQ26A
PD1503Y VS 0.85VS
5
4
3
2
1
8
1u_6.3V_X5R_04
15K_1%_04 10K_1%_04 PU4
0.1u_10V_X7R _04
EAP
POK
UG
SS
BOOT
PL8 V0.85 PJ4 0.85VS
6A
7
21 TMPC0603H-1R0M-Z01 *OPEN -5mm
GND
in
SET3_0.85VS 6 20 PHASE_0.85VS 1 2 1 2
SET2_0.85VS 7 SET3 PHASE 19 LG_0.85VS
PR52 SET1_0.85VS 8 SET2 LG 18
1K_1%_04 SET0_0.85VS 9 SET1 VCC 17 R T_0.85VS + PC116 PC123
10 SET0 RT 16
EN/PSM
FB_0.85VS
COMP
FB C SP PR163 PR164
3/29
CSP_0.85VS
VID 0
VID 1
CSN
5
6
220u_6.3V_6.3*6.3*4.2
0.1u_16V_Y5V_04
*20mil_04 *20mil_04
PR45 PC26 UP1509
11
12
13
14
15
22_04 0.01u_50V_X7R_04 3
C OMP_0.85VS PR69
1
CSN_0.85VS PQ26B PJ3 PR42
4
3.3V PR67 PD1503Y VS 12K_1%_04
0.85V_ON
PC29 PC124 33K_1%_04 *40mil
PC131
PR60 10_04
2
0.01u_50V_X7R_04
*0_04 47p_50V_NPO_04
PR68
100K_04 PC133
0.1u_25V_X7R_06
PR63 PJ19 *0.1u_10V_X5R_04
100K_1%_04 2 1 CSP
CSP_0.85VS
.c
*40mil CSN_0.85VS
VCCSA_VID0 PJ5
6 VCCSA_VID 0 VCCSA_VID1 2 1 PR161
6 VCCSA_VID 1
1.3K_1%_04
*40mil PR43 *20mil_04
VC CSA_SENSE 6
5V
PR 70 100K_04
1
VDD 3
w
PJ6
*6mil 0.9V 0.8V 0.725V 0.675V
2
PR162 PR71 *0_04 VCCSA_VID0 0 0 1 1

0.85VS_EN 14
10K_04 PQ30
2SK3018S3 0.85V_ON VCCSA_VID1 0 1 0 1
D
SET0 SET2 SET1 SET3

w
G PC34
S
*1u_6.3V_X5R_04
C
PR165 10K_04
B PJ20
1.05VS
PQ28 *40mil
E
BTN 3904
w
B - 32 Power 0.85VS, 1.8VS

Schematic Diagrams
POWER 1.5V/1.05VS
m
PD20 VIN
A C PC171 PC170 PC168 PC169
5V
5
6
7
8
4.7u_25V_X5R_08
4.7u_25V_X5R_08
0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PQ43
PU8 RB0540S2 4 ME4894-G
VDDQ
VTT_MEM
2
3
1
PC172
10u_6.3V_X5R_06
23 22 VBST PC173 0.1u_10V_X7R_04 1.5V
o
VLDOIN VBST VDDQ
PJ26 PL13
VTT_MEM
2 1 VTT 24
VTT DR VH
21 DRVH PR111
TMPC 1004H-1R0M-Z01
1 2
15A 1
PJ24
2
3.3_06 1.5V
*OPEN-2mm
PR192 1 20 LL PC167 *OPEN-8mm
PC176 PC175 PC174 VTTGND LL
*28mil_06
PR186 *1000p_50V_X7R_04 PC160 PC161
C
2 19
.c
10u_6.3V_X5R_06 10u_6.3V_X5R_06 *10u_6.3V_X5R_06 VTTSNS DRVL PD18 PD19 + PC164
VTTSNS DRVL
0_06
220u_6.3V_6.3*6.3*4.2
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
5
6
7
8
5
6
7
8
3 18 PQ45
GND PGND
*SK34SA
17
CSOD140SH
VDDQ PR190 *20mil_04 PR187 *28mil_06 *ME4626-G
A
CS_GND 5V 4 4
PR193 *0_04 MODE 4 16 CS PR188 6.2K_1%_04 PR185
5V
2
3
1
2
3
1
MODE CS
PR191 *0_04 15 PQ44 *5.1_06
PC178 VTTREF 5 PVCC5 14 PR189 2.2_06 ME4626-G
0.1u_10V_X7R_04 VTTREF VCC5
5V PR200 *28mil_06 C OMP_VDD 6 13 PC177 PC179
C OMP PGOOD 3.3V
1u_6.3V_X5R_04
1u_6.3V_X5R_04
x
PR76 *22_04 VDD QSN S8 11 S5_6163
VTT_MEM VDDQSNS S5
PC180 PR199
PR194
D
*1000p_50V_X7R_04 PR195 9 10 100K_04 *28mil_06

VDDQSET S3
SUSB G
PQ33 *10_04 VDD QSET
Sheet 32 of 42
GND
29,31 SUSB DDR1.5V_PWRGD
*MTN7002ZHS3
NC
NC
DDR1.5V_PWRGD 14
S
PC181
fi
G5616
POWER 1.5V/
12
25
*1000p_50V_X7R_04
5V PR198 *10K_1%_04
PR201 47K_04
PR196 10.7K_1%_04 1.05VS
5V R1
PR197 10K_1%_04 Vout=(R1/R2+1)*0.75
D
3
R2 PQ48B D PQ47 PC183
a
PR203 100K_04 MTDK5S6R *MTN7002ZHS3
5V 5G G
PR202 100K_04 0.1u_16V_Y5V_04
1.5S_CPU_PWRGD PR204 *100K_04 VTTEN S
S
4
6
1
D PJ27
PC182
D
2G PQ48A *40mil
PQ46 14,28 SUSC#
2SK3018S3 0.1u_16V_Y 5V_04 S MTDK5S6R
23,25,29 DD_ON#
2
SUSB G
in
S
5V
FOR S3 REDUCE ¹w¯d
VIN
A
5V
PD17
PR77
1.05V_ON RB0540S2 PC35 PC138 PC136 PC37 PC137
PR169 6.2K_1%_04
D
100K_04
4.7u_25V_X5R_08
4.7u_25V_X5R_08
*4.7u_25V_X5R_08
0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PQ34
5
6
7
8
SUSB G
2SK3018S3
PQ29
1.05VS
h
S
PC40 4 ME4894-G
2
3
1
ILIM
*0.1u_16V_Y5V_04
DH
PC41
V1.05 1.05VS
0.1u_10V_X7R_04 PL9 PJ21
13
14
15
16
PU1 TMPC 0603H-1R0M-Z01

PR78 10K_04 LX 1 2 1 2 10A
ILIM
3.3V
N.C
N.C
DH
12 1
.c
EN LX *OPEN-8mm
1.05VS_PWRGD 11 2 BST
14 1.05VS_PWRGD PGD BST
+ PC132 + PC139 PC135
C
5
6
7
8
PK3906 10 3 PQ32
VOUT VCC
1
*220u_6.3V_6.3*6.3*4.2
220u_6.3V_6.3*6.3* 4.2
0.1u_16V_Y5V_04
ME4626-G PD16 PR75
9 4 DL 4 PJ8
FB DL SK34SA *6mil 0_04
GND
RTN
2
3
1
N.C
N.C
17
2
PAD
G5413 -n²¾¾aªñPIN3¸}
8
PC44
1u_6.3V_X5R_04
w
*6mil PJ9
VCC P_SEN SE_G5413 2 1
VCCP_SENSE 5
PR170 PR80 PC141
R1
*20mil_04 4.02K_1%_04 *15p_50V_N PO_04 PR81 *0_04 VSSP_SEN SE 5
PR168 *90.9K_04 FB_1.05VS_6127 »Ý©Ô¨ìIC PIN5,6 ªþªñ¤U¦a
5V
w
Vout=(R1/R2+1)*0.75
PC42 PC43 R2 PR79
0.01u_16V_X7R_04 *20p_50V_N PO_04 9.31K_1%_04

w
POWER 1.5V/1.05VS B - 33
Schematic Diagrams
POWER VCORE1
m
o
330P_50V_X7R_04
470p_50V_X7R _04
PC 21 0.1u_10V_X7R_04 R T4
75K_1%_04
DROOPA
2
PUT COLSE
100K_NTC_06_A
PC 115
PC 114
PR167
PR41 24K_1%_04 TO GT
PR158 CSCOMPA PC27 1000p_50V_X7R_04 CSREFA
Inductor
1
165K_1%_04 PR148 1.6K_1%_04
PR159 PC122 PC 113 10p_50V_NPO_04
PUT COLSE 1.05VS
.c
TO CPU 10_1%_04 33p_50V_NPO_04 PR156 PC 120
SOCKET 3/29
PR26
*75_04 PR151 1K_1%_04 4.3K_1%_04 2200p_50V_X7R_04
PR157 124K_1%_06 TSENSEA
PR61 SW N1A 34 CSREFA
PR 152 11.8K_1%_0402
VGFX_C ORE H_PR OCH OT# PC25
3 H_PROCH OT#
FBA
0.047u_10V_X7R_04
100_04 PR 149 0_04
CSP1A
CSCOMPA
SWN 1A 34
5VS
6 VR1_VCCGT_SENSEA PC 22 RT3
2
PC111 1000p_50V_X7R_04 PR46 3.48k_1%_04 PR166
100K_NTC _06_A
PR150 * 0_04
PR 146 0_04 1000p_50V_X7R_04
CSREFA
8. 25K_1%_04
CSREFA 34
6 VR 1_VSSGT_SENSEA
1
PR58
CSP2A
CSP1A
3.3VS PR17 *10m il_short_04
C SSUMA
DROOPA
TSENSEA
PC 23 0.1u_10V_X7R_04
T RBST A#
IMON A
100_04
Sheet 33 of 42 PR 39
10K_04 PR147 19. 6K_1%_04
PUT COLSE
fi
PR 44 2_06 PU3
59
57
52
50
61
60
58
56
55
54
53
51
49
48
47
46
POWER VCORE1 1.05VS
VR_RD Y A
5VS N CP6132AMNR26 TO VGFX
HOT SPOT
VSNA
VSPA
D IFFA
FBA
COMPA
IOU TA
I LIMA
DROOPA
CSCOM PA
CSSUMA
CSREFA
CSP2A
CSP1A
TSNSA
TRBSTA#
EPAD
PC24 2.2u_6.3V_X5R_04
PR141 1 45
PR144 PR 140 2 VC C PW MA 44 PR145 2_06 PC110 0.22u_10V_X5R_04
3/23 VD DBP BSTA
54. 9_1%_04 VR_RDY A 3 43
HG1A 34
5VS
4 VR DY A H GA 42
75_1%_04
130_1%_04 VR_EN PR34 *10m il_short_04 SW1A 34
H_CPU_SVIDDAT 5 EN SW A 41
PJ2 *6mil LG1A 34
1 2 H_CPU_SVIDALRT#6 SD IO LGA 40 PR142 2_06 PC106 0.22u_10V_X5R_04
5 H_CPU_SVID DAT H_C PU_SVIDD AT H_CPU_SVIDCLK 7 ALERT# BST2 39
SC LK H G2 HG2 34
8 38
a
5 H_CPU_SVID ALRT# H_C PU_SVIDALRT# PR 35 10K_04 VBOOT SW2 34 Option for
5 H_CPU_SVID CLK H_C PU_SVIDC LK PR 32 90.9K_1%_04 9 VBOOT SW 2 37 PR 53
ROSC LG2 LG2 34 1 phase GT
VIN 10 36 PC102 2.2u_6.3V_X5R_04 *0_04 PR47
H_PROCH OT# 11 VR MP PVC C 35 *10m il_short_04
DELAY _PW RGD 12 VR HOT# PGN D 34
PR31 1K_04 LG1 34
13 VR DY LG1 33 5VS CSP1A
VSN SW 1 SW1 34
3.3VS PC17 14 32
HG1 34
15 VSP H G1 31 CSP2A
CSCOMP
DIF F BST1
TRBST #
TSENSE
C SSU M
0.01u_50V_X7R_04
DROOP
PR126 2_06 PC98 0.22u_10V_X5R_04 3/23
DR VEN
CSR EF
C OMP
TSNS
C SP3
CSP2
CSP1
PR23 10K_04
PWM
IOUT
in
ILI M
14,29 DELAY _PW RGD
FB
PC 14 5VS
17
19
24
26
16
18
20
21
22
23
25
27
28
29
30
*1u_10V_Y 5V_06 3/29
Option for
TRBST#
CSP1 PR 7 6. 98K_1%_04 PR6
D ROOP
T SENSE
SWN1 34 2 phase CPU
5 VCOR E_VSS_SENSE PR 139 *10mil_short_04 VSN PR 122 39.2K_1%_04 *10m il_short_04 PR154 RT2
IM ON
100K_N TC_06_A
PC101 PC 3
8.25K_1%_04
1000P_50V_X7R_04 PR13 0. 047u_10V_X7R_04 CSP3
5 VCOR E_VC C_SENSE PR 138 *10mil_short_04 VSP PC 13 0.1u_10V_X7R_04 *1K_1%_04
1
PR9
3/23 CSREF
h PR134 1K_1%_04 PC89 33p_50V_NPO_04 C SP1 CSP2 PR 5 6. 98K_1%_04 SWN2 34
11.5K_1%_04
C SP2
C SP3
PR4 PC 2
PUT COLSE
3/29
PC87 100p_50V_NPO_04PC 83 4700p_50V_X7R _04 *1K_1%_04 0. 047u_10V_X7R_04 TO VCORE
3.3VS PR133 10_1%_04 PC90 680p_50V_X7R_04 CSREF CSREF HOT SPOT
CSREF 34
PR 135 49.9_1%_04 PR 121 4.12K_1%_0402
.c
CSCOMP
10K_04 PR132 1.21K_1%_04 PR123 10.7K_1%_04 PC12
PR40 TRBST# 1000p_50V_X7R _04
1
CSSU M 3/29
PJ1 PC 10 PR21 PC11
*6mil 4700p_50V_X7R_04 3/29 PC 85 1200p_50V_X7R_04
24K_1%_04
1000p_50V_X7R_04
2
PR36 *10mil_short_04 PR 124 100K_1%_06 SWN1 34

VR_EN SGND
11,14,28,29 ALL_SY S_PWRGD
PC 82 470p_50V_X7R_04
PR 119 100K_1%_06 SWN2 34
PR 120 PR 118
w
75K_1%_04 165K_1%_04
D ROOP
RT1
2 1
CSCOMP PR125 2. 43K_1%_04 PC84 1000p_50V_X7R_04 CSR EF
PUT COLSE
TO VCORE
100K_N TC_06_A
Phase 1
Inductor
w
w
B - 34 POWER VCORE1
Schematic Diagrams
POWER VCORE2
m
o
.c
VIN
3/28
PC81 PC92 PC88 PC5 PC127
+
+
4.7u_25V_X5R_08
4.7u_25V_X5R_08
* 15u_25V_6.3* 4.4
0.1u_50V_Y5V_06
PQ18
D
*330uF_25V
MDU1516
G
x
VIN
S
3/23
3/28
HG1 PR131 *28m il_short_06 HG_1 PL6 PC134 PC31 PC 30 PC28
33 HG1 DCR 1.1mohm +
PQ3
25A
Sheet 34 of 42
4.7u_25V_X5R_08
4.7u_25V_X5R_08
1 2
*15u_25V_6.3*4.4
SW 1
0.1u_50V_Y5V_06
MDU1516
33 SW 1 VCORE
D
0.36UH_12.9*14*3.8
G
fi
LG1 PQ23
33 LG1
POWER VCORE2
S
MDU1512 PQ22 3/23
D
MDU1512
D
PD14 PR 20
G CSREF H G2 PR66 * 28m il_short_06 H G_2
C SREF 33 33 HG2
G FM5822 DCR 1.1mohm PL7
25A
S
10_04 SW 2 1 2
33 SW 2 VCORE
S
PR19 * 10m il_short_04 SW N1 33 0.36UH_12.9* 14* 3.8

PQ24 PQ 25
LG2 MD U1512 MD U1512
33 LG2
C
D
D
PD13
a
PR 155
G G FM5822 CSR EF C SREF 33
A
10_04
PR 153 * 10m il_short_04 SW N2 33
VCOR E
in
VIN
PC 112 PC118 PC121 PC 119 PC 117
+ + + + +
330uF_2.5V_9m_6.3*6
330uF_2.5V_9m _6.3*6
*330uF_2.5V_9m _6.3* 6
330uF_2.5V_9m _6.3*6
330uF_2.5V_9m_6.3*6
3/28
PC 36 PC38 PC39
4.7u_25V_X5R_08
4.7u_25V_X5R_08
0.1u_50V_Y5V_06
PQ4
D
MDU1516
3/23
G
VGFX_CORE
S
H G1A PR72 *28m il_short_06 H G_1A

33 HG1A
33 SW 1A
SW 1A
PQ31 PQ27
DCR 1.1mohm
PL10
0.36U H_10* 10* 3.5
1 2 25A
+
PC 140
h
330uF_2.5V_9m _6.3* 6
C
LG1A MD U1512 MDU1512

33 LG1A
D
.c
G G PD5
CSOD140SH
S
PR74
C SREFA 33
10_04
PR 73 *10m il_s hort_04 SW N1A 33

w
w
w
POWER VCORE2 B - 35
Schematic Diagrams
AC IN, CHARGER
m
PR38 *20mil_04
VA
PR37 *470K_04
PQ21
4
VIN MEP4435Q8 V_BAT
1 5
o
2 6
3 7
8
4/3
J_DC_JACK1 ¾aªñJBATTA1
50932-00301-001 PL1 VA PQ16 8.2UH_7.3*6.6*2.8MM
HCB4532K-800_18 MEP4435Q8 PQ20A
PC1 8 PR115 EMB17A03V PL5 PR16
.c
1 7 3 0.01_1%_32 6 TMPB0603M-8R2MN-Z01 0.01_1%_32
2 6 2 5 3
0.1u_50V_Y5V_06
GND1
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
10_06
10_06
10_06
10_06
5 1
0.1u_50V_Y5V_06
GND2 PR3 PQ20B
7
8
3 10K_04 EMB17A03V PR143
4
*5.1_06
PR117
100K_04 2
PR137
W550EU
PC93
PC105
PR1
PC99
PC18 *20mil_short_04 PC109
PR30
PR29
PC8
1
PR2
PC20
PC16
PC19
3/23 *220p_50V_NPO_04
PC78
PC15
PC91
A
5
PC9
PD1 PR116 0.047u_10V_X7R_04 0.047u_10V_X7R_04
x
15K_04 PC96 4
RB0540S2 3
0.1u_50V_Y5V_06 3/23
LX_CHG 14 13 2
C
LX HDR 1
LDR 16 5 ICHP JBATTA1
Sheet 35 of 42 PR33
BST_ 12
LDR
BSTOZ8681 ICHM
ICHP
4 ICHM
PC6 *0.01u_50V_X7R_04 *53022-00571-001
fi
VAC 1 11 V_BAT
AC IN, CHARGER 10_06 C A VDDP 15

VAC
VDDP
SDA
SCL
10 SMC_BAT
SMD_BAT
PL2
PL4
*10mil_short_04
*10mil_short_04
5
4
3
PD11 MDL914S2 IACM 3 7 IAC1 PL3 *10mil_short_04
IACM IAC 28 BAT_DET 2
D
IACP 2 8 COMP PC95 1
PQ17 IACP COMP PC94 PC4 JBATTA2
G PR11 9 6
BASE
2SK3018S3 100K_04 AC AV 53022-00571-001
ACAV VDDA
*30p_50V_NPO_04
*30p_50V_NPO_04
*30p_50V_NPO_04
S
PR136
W540EU
a
PR10 PR18 PU2 *20mil_04
17
PR28
0_04 *0_04 *15mil_short_06
PR12 PC86 PC107 PC108 PC104 PR128 *20mil_04
SMC_BAT_R 28
*1u_25V_08 *1u_25V_08 1u_25V_Y5V_08
100K_04
AC_IN
1000P_50V_X7R_04
PR130 *20mil_04
SMD_BAT_R 28
PC97
28 PMOSFET_ CONTROL# PR8
TOTAL_CUR 28
0.47u_10V_Y5V_04
PC100 100_04 PC103
in
C302 47P_50V_NPO_04
1u_10V_Y5V_06 1u_10V_Y5V_06
PR24 24K_1%_04
VDD3
PR27
h PQ19 PR14
10K_04
AC_IN# 28
C
MTP3403N3 300K_1%_04 PD12
V_BAT S D C A B PQ1
BAT_VOLT 28 VA DTC114EUA
.c
ZD5245BS2
PR22 PR15 PC7
G
E
100K_1%_04 60.4K_1%_04 0.1u_16V_Y 5V_04
D
1) All pow er traces should be routed on the outer layers VDD3

GNDP, VAD, VSYS, LX, VCHG, VBATT G PQ2 PR25 10K_04
VDD3 AC_IN 30
2SK3018S3 PR129 4.7K_04
S
2) Use Kelvin connections for R3, R4 PR127 4.7K_04

(seperate force and measurement traces) C
w
SMC_BAT AC
PD2 A
3) R23 and R24 are dummy resistors, for layout purposes only *BAV99N3
(serves as single point connection betw een GNDP & GNDA) C
SMD_BAT AC
PD3 A
4) Footprint TO-236 is equivalent to SOT-23 *BAV99N3
C
BAT_DET AC
5) Footprint SIP/1P is a single hole axial pad PD4 A
w
*BAV99N3
6) All resisitors, capacitors and semiconductors are SMD
7) Potentiometers, and test points are axial devices

w
B - 36 AC IN, CHARGER
Schematic Diagrams
AUDIO BOARD
m
USB PORT A_USBVCC
60 mil
AC3 AC2
o
22u_6.3V_X5R_08
22u_6.3V_X5R_08
4/2 AC4
0.1u_16V_Y5V_04
AJ_USB1
AGND 1
Port3 V+
.c
AL6
AUSB_PN1 4 3 AUSB_PN1_R 2
DATA_L
AUSB_PP1 1 2 AUSB_PP1_R 3
*WCM2012F2S-SHORT DATA_H
GND1
GND2
GND3
GND4
4
GND
D02A
Change footprint US04036BCA081
GND2
GND1
GND3
GND4
6-21-B49C0-104
6-21-B49B0-104
AGND
x
TO M/B AUDIO JACK
Sheet 36 of 42
fi
AMIC_SENSE
AMIC1-R AL1 FCM1005KF-121T03
5 AJ_MIC1
4
3 R
AUDIO BOARD
AMIC1-L AL2 FCM1005KF-121T03 2
A_USBVCC AJ_AUDIO1 6 L
1
AC6 AC5 2SJ-T351-S23
1
AMIC1-R 2 100p_50V_NPO_04 100p_50V_NPO_04 MIC IN 6-20-B2800-106
a
AMIC1-L 3
4
AHEADPHONE-R 5
6
BLACK
AHEADPHONE-L
AMIC_SENSE 7 A_AUDG
AHP_SENSE 8 AHP_SENSE
AUSB_PN1 9 ASPK_HP# 5 AJ_HP1
AUSB_PP1 10 4
11 AHEADPHONE-R AR2 68_04 AL3 FCM1005KF-121T03 3 R
in
ASPKOUTR+ 12
ASPKOUTR- 13 AHEADPHONE-L AR3 68_04 AL4 FCM1005KF-121T03 2
14 6 L
85201-14051-01 1
A_AUDG AGND PCB Footprint = 85201-14X5_L AR4 AR1 AC8 AC7 2SJ-T351-S23
*1K_04 *1K_04 100p_50V_NPO_04 100p_50V_NPO_04 HEADPHONE 6-20-B2800-106

BLACK
A_AUDG
3/23
AC9
AC11
AC1
*0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
h ASPKOUTR+
ASPKOUTR-
3/27
AR5 0_04
AC13
*1000p_50V_X7R_04 ASPKOUTR+_R
ASPKOUTR-_R
AJ_SPKR1J_SPK1
1 2 1
.c
AC10 *0.1u_16V_Y5V_04 AR6 0_04
2
85204-02001
AC14 AC12 85204-02R
AGND A_AUDG *180p_50V_NPO_04 *180p_50V_NPO_04
6-20-43150-102
6-20-43110-102
Close to AJ_AUDIO1 A_AUDG
w
AH5 AH1
O6X4_5B3X1_5D3X1_5 C59D59 AH2 AH3
2 9 2 9
3 8 3 8
4 1 7 4 1 7
5 6 5 6
MTH8_0D2_8 MTH8_0D2_8
AGND
AGND AGND AGND AGND
w
w
AUDIO BOARD B - 37
Schematic Diagrams
AUDIO BOARD (W550EU1)
m
USB PORT AA_USBVCC AA_USBVCC
60 mil 60 mil
AAC3 AAC2 AAC15 AAC16
o
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
4/2 AAC4 4/2 AAC17
*0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04
Port3 Port4
AAJ_USB1 AAJ_USB2
AAGND 1 AAGND 1
V+ V+
.c
AAUSB_PN1 4 AAL6 3 AAUSB_PN1_R 2 AAUSB_PN2 4 AAL8 3 AAUSB_PN2_R 2
DATA_L DATA_L
AAUSB_PP1 1 2 AAUSB_PP1_R 3 AAUSB_PP2 1 2 AAUSB_PP2_R 3
*WCM2012F2S-SHORT DATA_H *WCM2012F2S-SHORT DATA_H
GND2
GND3
GND4
GND1
GND2
GND3
GND4
GND1
4 4
GND GND
*US04036BCA081 *US04036BCA081
GND1
GND2
GND3
GND4
GND1
GND2
GND4
GND3
6-21-B49C0-104 6-21-B49C0-104
6-21-B49B0-104 6-21-B49B0-104
AAGND AAGND
x
Sheet 37 of 42 TO M/B AA_USBVCC
AUDIO JACK
fi
AAJ_AUDIO2
AUDIO BOARD 4
3
2
AAUSB_PN2
AAUSB_PP2 5 AAJ_MIC1
AAMIC_SENSE 4
(W550EU1) 1
*85201-04051
AAMIC1-R
AAMIC1-L
AAL1
AAL2
*FCM1005KF-121T03
*FCM1005KF-121T03
3
2
R
AAGND 6 L
1
AAC6 AAC5 *2SJ-T351-S23
a
*100p_50V_NPO_04 *100p_50V_NPO_04 MIC IN 6-20-B2800-106
AA_USBVCC AAJ_AUDIO1 BLACK

AA_AUDG
1 AAHP_SENSE
AAMIC1-R 2 AASPK_HP# 5 AAJ_HP1
AAMIC1-L 3 4
in
4 AAHEADPHONE-R AAR2 *68_04 AAL3 *FCM1005KF-121T03 3 R
AAHEADPHONE-R 5
AAHEADPHONE-L 6 AAHEADPHONE-L AAR3 *68_04 AAL4 *FCM1005KF-121T03 2
AAMIC_SENSE 7 6 L
AAHP_SENSE 8 1
AAUSB_PN1 9 AAR4 AAR1 AAC8 AAC7 *2SJ-T351-S23
AAUSB_PP1 10
11 *1K_04 *1K_04 *100p_50V_NPO_04 *100p_50V_NPO_04
AASPKOUTR+ 12 HEADPHONE 6-20-B2800-106
AASPKOUTR- 13
14 BLACK
*85201-14051-01
AA_AUDG AAGND PCB Footprint = 85201-14X5_L AA_AUDG
AAC9 *0.1u_16V_Y5V_04
h AASPKOUTR+ AAR5 *0_04
AAC13 AAJ_SPKR1
.c
AAC11 *0.1u_16V_Y5V_04 *1000p_50V_X7R_04 AASPKOUTR+_R
1 2 1
AASPKOUTR- AAR6 *0_04 AASPKOUTR-_R
AAC1 *0.1u_16V_Y5V_04 2
*85204-02001
AAC10 *0.1u_16V_Y5V_04 AAC14 AAC12
*180p_50V_NPO_04 *180p_50V_NPO_04
6-20-43150-102
AAGND AA_AUDG 6-20-43110-102
Close to AAJ_AUDIO1 AA_AUDG
w
AAH5 AAH4
T6X5_2B3X2_2D3X2_2 H5_2B2_2D2_2 AAH2 AAH3
2 9 2 9
3 8 3 8
4 1 7 4 1 7
5 6 5 6
MTH8_0D2_8 MTH8_0D2_8
AAGND AAGND
w
AAGND AAGND AAGND AAGND

w
B - 38 AUDIO BOARD (W550EU1)

Schematic Diagrams
LID SW BOARD (W550EU1)
m
o
.c
LID SWITCH BOARD
x
Sheet 38 of 42
fi
L_3.3V LID SW BOARD
LJ_LID1
3
(W550EU1)
L_LID_SW#
2
1
a
*85204-03001
L_GND
in
3
L_3.3V For 15" 1 2
L_U1
1 2 L_LID_SW#
h VCC OUT
GND
L_C1
3
*0.1u_16V_Y5V_04 *MH248-ALFA-ESO
.c
LH1 LH2 LH3
H2_3B5_0D2_3 C43D43 C43D43
L_GND L_GND
6-02-00248-LC2
6-02-00268-LC1
L_GND
w
w
w
LID SW BOARD (W550EU1) B - 39

Schematic Diagrams
POWER SW BOARD
m
o
POWER SW & LED
.c
S_3.3VS
POWER
SWITCH
SR1
LED
220_04
20mil
x
Z4301
SC2
Sheet 39 of 42
A
*0.1u_16V_Y 5V_04
SJ_SW1
fi
SMGND
POWER SW 1
2
3
SM_BTN# SD2
SMGND
RY -SP150DBW71-5A
S_3.3VS
C
4
BOARD 85201-04051
20mil 3/28
6-52-56001-023
6-52-56001-028
6-52-56000-020
6-52-56001-022
a
SMGND
in
SMH1 6-53-3050B-042
2 9
3 8
4 1 7
POWER BUTTON
5 6
h MTH6_0D2_2
SMGND SMGND
1
3
SPWR_SW1
TJG-532-V-T/R
2
4
SM_BTN#
1
5
6
SC1
.c
SMH2 SD1
2 9 0.1u_50V_Y5V_06
3 8 *V15AVLC0402
4 1 7
2
SH1 5 6 VARISTOR
H2_2B4_2D2_2
MTH6_0D2_2 6-24-30003-006
SMGND SMGND
SMGND SMGND
w
w
w
B - 40 POWER SW BOARD
Schematic Diagrams
EXTERNAL ODD BOARD
m
ODD BOARD
o
.c
FROM M/B TO ODD
QJ_ODD1 QJ_ODD2
S1 S1
S2 Q_SATA_TXP1 S2
x
S3 Q_SATA_TXN1 S3
S4 S4
S5 Q_SATA_RXN1 S5
S6
S7
Q_SATA_RXP1 S6
S7 Sheet 40 of 42
fi
QGND QGND
EXTERNAL ODD
P1
P2
Q_5VS
Q_ODD_DETECT#
Q_5VS
P1
P2 BOARD
P3 P3
P4 Q_SATA_ODD_DA# P4
P5 P5
a
P6 P6
*242003-1 *202001-1
P IN P IN
G ND1 ~2 =WG ND QGND QGND G ND1 ~3 =Q G ND
in
6-21-14030-013 6-21-13010-013(DIP)
QH1 QH2 QH3 QH4

h Q_5VS
.c
H7_0D2_3 H7_0D2_3 C87D87 C87D87 QC2 QC3
*0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04
QGND
QGND QGND
w
w
w
EXTERNAL ODD BOARD B - 41

Schematic Diagrams
Power Diagram
m
3.3V 2.92A 1.05VS
PWR SW B'd 1
M_BTN# RTCVCC 3.3VS
U34 48A VCORE
1.05VS_VTT 1.5VS U29
Cougar 8.5A 1.05VS_VTT
3.3VS VDD3 Point CPU VGFX_CORE
33A 1.5V
9 ALL_SYS_PWRGD
o
2 4a RSMRST# 1.8VS SO-DIMM
U17 RSMRST#, 11 PMSYS_PWRGD_BUF 1.2A
PWR_SW# DPWROK DRAMPWROK SM_DRAMPWROK
PU6 IT8518 4b PWR_BTN#
12A 1.5VS_CPU
P2808B PWRBTN# 12 H_CPUPWRGD
10 PM_PCH_PWROK PWOCPWRGD UNCOREPWRGOOD 0.85VS
PWROK, 6A
APWROK 15 PLT_RST#
PLTRST#
.c
RESET#
VIN
0a 14 SYS_PWROK
PU7 SYS_PWROK
uP6182 VDD3
PJ26 5b 3.3V
SLP_S3# SLP_S4# VIN
Always
0b 5a 1.5VS_CPU 1.5V U11
enable 1.5V 5c
VDD5 PJ5 1.05V USB 3.0
EN_5V PJ27 0c 5 SUSC# 5V PU5 PJ9
U9 uPD720200
uP6163
USBVCC01 EN GS7113
6e EN
DD_ON_EN_VDD 5V
VTT_MEM
x
U37 USB PJ7
VDD3 PORT1 7
TPS2540 SUSB DDR1.5V_PWRGD U22A
0 1.05VS 1.05VS_VTT
EN EN PG
VIN
PQ11
Sheet 41 of 42 VIN VIN PQ57
fi
6d
Power Diagram 3a
6 SUSB#
PQ27B
PU11 PJ25 1.05VS
uP6127 1.05VS_PWRGD
VDD3 3.3V EN PG U22B
1.05VS_VTT_EN
3c
PQ64 3b USBVCC3.0 6f 10
3.3V 14
DD_ON# VDD5 5V 1.8VS PM_PCH_PWROK
8 EC
a
U14 PU4 PJ6 VIN SYS_PWROK
3 0.85VS
PQ66 RT9715BGS AX6615
DD_ON USB USB 1.8VS_PWRGD PJ20
EN EN PG U22C PU3 13b U22D
PQ27A PORT0 PORT3 PU10 9 NCP6131S DELAY_PWRGD
uP6122 0.85VS_PWRGD EN PG
6a PG ALL_SYS_PWRGD
EN
VDD5 5VS
in
13a
VCORE
? PU1,PU2
PQ65
PLVDD NCP5199
3.3V VIN 18
VGFX_CORE
PU12
Q6 NCP5199
6c 16c
? PANEL VDD3 3.3VS 1.05VS PEX_VDD
NB_ENAVDD
SB
?
SATA_ODD_PWRGT
5VS
EN
U32
G5243
?
5VS_ODD
h P0
Mode:
23A NVVDD
PQ63
1.5V
6b
1.5VS
EC
16
dGPU_PWR_EN#
PQ4
16d
.c
U26 PEX_VDD 16a 1.5V FBVDDQ
ODD 1.5A
GPU PQ24 3V3_RUN 16b
0.1A 3V3_RUN PU8 PJ1 NVVDD PQ7
PLT_RST# 17 3.3V
PERSTB# uP6122
dGPU_RST# U4 PEXRST# FBVDDQ EN PS_NVVDD_PGOOD#
4A PG
PQ35
?
3.3V 3G_3.3V
VGA Frame
Buffer A U7,U8,U30,U31
w
Q30
?
3G_POWER 3G MINI CARD VGA Frame
EC Buffer c U3,U5,U25,U28
?
DVDD(1.2V) 3.3VS 3.3V 5VS 5VS 3.3VS 5VS 3.3VS
w
5V 5V_CCD
? U1 U18 U19
CCD_EN G5243 CardReader
EN WLAN MINI CARD Touch Pad SATA HDD
JMC251C CODEC ALC269
CCD
w
B - 42 Power Diagram
Schematic Diagrams
Power On SEQ
m
POWER ON SEQUENCE
o
M_BTN#
M_BTN# 506ms DD_ON
DD_ON 28ms
1.2ms 3.3V
.c
3.3V
2.4ms 5V
5V
RSMRST#
RSMRST# 100ms PWR_BTN#
PWR_BTN# 52ms
200ms SUSC#
x
SUSC# 218ms
1.5V 1.2ms
1.5VS_CPU 1.24ms
Sheet 42 of 42
fi
Power On SEQ
SUSB# SUSB# 32us
5VS 5VS 3ms
a
1.5VS 1.5VS 1.16ms
3.3VS 3.3VS 2.9ms
1.05VS 1.05VS 260us
in
VTT_MEM VTT_MEM 1.56ms
1.8VS 1.8VS 4ms
0.85VS 0.85VS 1.28ms
ALL_SYS_PWRGD
PM_PCH_PWROK
ALL_SYS_PWRGD 5.6ms
PM_PCH_PWROK
h332ms
.c
PM_DRAM_PWRGD PM_DRAM_PWRGD 292ms
H_CPUPWRGD H_CPUPWRGD 434ms
VCORE VCORE 434ms
DELAY_PWRGD DELAY_PWRGD 434ms
w
SYS_PWROK SYS_PWROK 434ms

S4_STATE# S4_STATE# 434ms
PLT_RST# PLT_RST# 434ms
w
VGFX_CORE VGFX_CORE 4.56s

w
Power On SEQ B - 43
B - 44
Schematic Diagrams
w
w
w
.c
h
in
a
fi
x
.c
o
m
BIOS Update
Appendix C:Updating the FLASH ROM BIOS 
m
BIOS Version
To update the FLASH ROM BIOS, you must: Make sure you down-
• Download the BIOS update from the web site. load the latest correct
o
• Unzip the files onto a bootable CD/DVD/USB Flash Drive. version of the BIOS ap-
propriate for the com-
• Reboot your computer from an external CD/DVD/USB Flash Drive. puter model you are
.c
• Use the flash tools to update the flash BIOS using the commands indicated below. working on.
• Restart the computer booting from the HDD and press F2 at startup enter the BIOS.
You should only
• Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer.
download BIOS ver-
x
• After rebooting the computer you may restart the computer again and make any required changes to the default BIOS sions that are
settings.
C:BIOS Update
V1.01.XX or higher as
appropriate for your
fi
Download the BIOS computer model.
1. Go to www.clevo.com.tw and point to E-Services and click E-Channel. Note that BIOS versions
a
2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files are not backward com-
(the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model patible and therefore
(see sidebar for important information on BIOS versions). you may not down-
in
grade your BIOS to an
older version after up-
Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive grading to a later ver-
1. Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the sion (e.g if you upgrade
downloaded files. h
2. Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB
a BIOS to ver 1.01.05,
you MAY NOT then go
back and flash the BIOS
.c
flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software). to ver 1.01.04).
Set the computer to boot from the external drive

w
1. With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the
computer and press F2 (in most cases) to enter the BIOS.
2. Use the arrow keys to highlight the Boot menu.
w
3. Use the “+” and “-” keys to move boot devices up and down the priority order.
4. Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS.
w
5. Press F4 to save any changes you have made and exit the BIOS to restart the computer.
C - 1
BIOS Update
Use the flash tools to update the BIOS

1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you
see the message “Starting MS-DOS”. You will then be prompted to give “Y” or “N” responses to the programs
m
being loaded by DOS. Choose “N” for any memory management programs.
2. You should now be at the DOS prompt e.g: DISK C:\> (C is the designated drive letter for the CD/DVD drive/USB
o
flash drive).
3. Type the following command at the DOS prompt:
.c
C:\> Flash.bat
4. The utility will then proceed to flash the BIOS.
5. You should then be prompted to press any key to restart the system or turn the power off, and then on again but
x
make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer
C:BIOS Update
restarts.
fi
Restart the computer (booting from the HDD)
1. With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from
a
the HDD.
2. Press F2 as the computer restarts to enter the BIOS.
in
3. Use the arrow keys to highlight the Exit menu.
4. Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection.
5. Press F4 to save any changes you have made and exit the BIOS to restart the computer.
h
Your computer is now running normally with the updated BIOS
.c
You may now enter the BIOS and make any changes you require to the default settings.
w
w
w
C-2

W550el 6 71 W5400 D02

Uploaded by

Copyright:

Available Formats

W550el 6 71 W5400 D02

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

W550el 6 71 W5400 D02

Uploaded by

Copyright:

Available Formats

w

About this Manual

The following information is included:

IMPORTANT SAFETY INSTRUCTIONS

Instructions for Care and Operation

The computer has specific power requirements:

able to also remove

turning the machine

h Adapter Plugged-In Note that you should al-

PCH 9/9- GND .............................................................................B-21

Bottom ............................................................................................ A-4 SATA ODD, LED, USB CHARGE .............................................B-26

HDMI, RJ45 ................................................................................. B-27

EXTERNAL ODD BOARD ........................................................ B-41

Specifications Processor Options Security

Intel® Pentium® Processor® Security (Kensington® Type) Lock Slot

 2MB L3 Cache, 22nm, DDR3-1600MHz, TDP 35W

Intel HD Graphics One DC-in Jack

nology for up to 1.7GB)

Mini Card Slots Environmental Spec

Slot 1 for WLAN Module or Combo WLAN and Bluetooth Temperature

6 Cell Smart Lithium-Ion Battery Pack, 48.84WH

DC Output: 19V, 3.42A (65W)

1 - 4 External Locator - Top View with LCD Panel Open

External Locator - Front & Right Side Views Figure 2

External Locator - Front & Right Side Views 1 - 5

External Locator - Left Side & Rear View

1 - 6 External Locator - Left Side & Rear View

External Locator - Bottom View

puter from overhea-

External Locator - Bottom View 1 - 7

Figure 7 Mainboard Overview - Top (Key Parts)

1 - 8 Mainboard Overview - Top (Key Parts)

Mainboard Overview - Bottom (Key Parts) Figure 8

Mainboard Overview - Bottom (Key Parts) 1 - 9

Figure 9 Mainboard Overview - Top (Connectors)

1 - 10 Mainboard Overview - Top (Connectors)

Mainboard Overview - Bottom (Connectors) Figure 10

h 12. CCD Cable

Mainboard Overview - Bottom (Connectors) 1 - 11

the same way. The pin1 side is usually not indicated.

To remove the Battery: To remove the 3.75G Module:

1. Remove the battery page 2 - 5

Removing the Battery Figure 1

Removing the Battery 2 - 5

Removing the Hard Disk Drive

New HDD’s are blank. Before you

You have backed up any data

You have all the CD-ROMs and

h erating system and programs.

If you have access to the internet,

2 - 6 Removing the Hard Disk Drive

Removing the Hard Disk Drive 2 - 7

Figure 4 Removing the Optical (CD/DVD) Device

2 - 8 Removing the Optical (CD/DVD) Device

4. Remove the screw at point 6 (Figure 5c). Figure 5

Removing the Optical (CD/DVD) Device 2 - 9

Figure 6 Removing the System Memory (RAM)

5. Component Bay Cov-

2 - 10 Removing the System Memory (RAM)