Electrical auxiliaries OF, SD, MX + OF, MN

C60
IEC

They remotely trip or indicate circuit breakers or Compliance with electrical auxiliaries standards
supplementary protectors. b For UL 489 circuit breaker File #217688.
b For CSA C22.2 No. 5.2 circuit breakers File #179014.
b For UL 1077 Supplementary Protectors File #E90509.
b For CSA C22.2 No. 235-M04 Supplementary Protectors File #179014.
b For IEC 60947-2 and IEC 60947-5-1 circuit-breakers.
b CE Marked.

Possible electrical auxiliary combinations

Auxiliaries are mounted to the left of the circuit breaker and/or the supplementary
protectors for a total width of 2.13 in (54 mm) max. :
b they are fixed using clips (no tools)
b a maximum of 3 indication auxiliaries (OF), (SD) on the same device
b a maximum of 2 tripping auxiliaries (MX + OF) or (MN) on the same device.
2.13 in. (54 mm): 6 modules of 0.354 in. (9 mm) max.
auxiliaries contact releases
PB100995-35

PB100994-35

PB100993-35

PB100992-35

PB100977A_SE
+ + + +

SD Alarm OF auxiliary MX + OF Shunt MN C60

Switch Switch trip and Undervoltage Supplementary
auxiliary switch release protectors
or C60
circuit breaker

Connection for copper cables UL 486A file #E216919

b Terminal pads for:
v two #16 AWG (1.5 mm2) cables, or one #14 AWG (2.5 mm2) cable
v torque 9 Ib.in.
Type Control voltage Width in Cat. no.
Va Vc modules UL/CSA
0.354 in.
(9 mm)
OF auxiliary switch
1 26925

SD alarm switch
1 26928

MX + OF shunt trip
24 12 to 24 2 27118
48 48 2 27110
110 to 277 110 to 130 2 27109
MN undervoltage release
Instantaneous 24 24 2 27108
48 48 2 27106
120 - 2 27107
220 to 240 - 2 27105

 version: 3.2 90081E.indd

 Electrical auxiliaries OF, SD, MX + OF, MN
C60
IEC

Remote tripping
Remote tripping is possible by means of a shunt trip (MX+OF) or undervoltage
release (MN). A tripped device is indicated by a red indicator flag on the front panel.

MX + OF shunt trip
b When energized, trips the associated device:
DB100993-35

v equipped with an O + F switch that indicates the “open” or “closed” position of the
device
v realize a self-interrupting allowing the control circuit to remain on.
Wiring diagrams

08603083

DB112939
u>

14 12 C2 C1

MN Undervoltage Release
DB100992-35

b When the voltage drops to 70–35% of the supply voltage, the associated device
trips and is prevented from reclosing until the supply voltage is restored:
v uses emergency stop via push button
v uses safety feature on circuit supplying several machines preventing uncontrolled
restarting of the motors.
Wiring diagrams
08603084

08603146a
u<
u<

D1 D2
D1 D2

L or +

N or -

90081E.indd version: 3.2 

 Electrical auxiliaries OF, SD, MX + OF, MN
C60
IEC

Remote Indication
Operation test button on the front panel of the auxiliary (OF) and alarm switches (SD)
allows simulation of the OF and SD functions without operating the device.

OF auxiliary switch
b Indicates the “open” or “closed” position of the device.
Wiring diagrams
PB100994-35

08603086

DB112940
14 12 11

SD Alarm Switch
b Indicates the “tripped-on-fault” position of the device with a red indicator flag on
the front panel.
Wiring diagrams
PB100995-35

08603085

DB112941
92 94 91

OF and SD position contact depending on status

of combinated circuit breaker:
C60 Position ON b
OFF b
Trip b
Switch 11/14 ON OFF OFF
OF 11/12 OFF ON ON
Switch 91/94 OFF OFF ON
SD 91/92 ON ON OFF

 version: 3.2 90081E.indd

Electrical auxiliaries OF, SD, MX + OF, MN
C60
IEC

MN, MX + OF releases technical data

Releases MN
Cat. no. 27105 27106 27107 27108
Nominal line voltage (V) (10, -20%) 220 to 240 48 48 120 24 24
Alternating current (a) b b - b b -
Direct current (c) - - b - - b
Operating frequency 50/60 Hz b b - b b -
Min. cut-in voltage (V) 187 40.8 40.8 102 20.4 20.4

Min. tripping voltage (V) Between 0.35 and 0.70 Un

Holding current (A) 0.014 0.03 0.02 0.011 0.04 0.02
Power consumption (VA) 3.3 1.6 1.1 1.3 1 0.5
Min. voltage dip time (ms) 30 8 8 8 10 10

Releases MX+OF
27109 27110 27118
Nominal line voltage (V) (+10, -20%) 120 240 277 110 125 48 48 12 24 24
Alternating current (a) b b b - - b - - b -
Direct current (c) - - - b b - b b - b
Operating frequency 50/60 Hz b b b - - b - - b -
Min. cut-out voltage (V) 60.5 60.5 60.5 60.5 60.5 26.4 26.4 6.6 6.6 6.6

Inrush current (A) 0.4 0.8 1 0.3 0.3 1 0.7 2.5 7.7 5.6
Inrush power (VA) 44 184 277 38 45 48 33.6 30 185 135
Min. control impulse duration (ms) 8 8 8
Power circuit breaking time (ms) 18 18 18

OF contact rated operational current Ie (A) See the auxiliary contact table

OF, SD auxiliary contacts technical data

b Degree of protection: IP20.
b Rating of auxiliary contact short-circuit protection device:
v circuit breaker: C60 - 2P - C curve - 6 A - limitation class 3
v fuse: 6 A, 500 V, type Gg, 10.3 x 38 mm.
Contact rated operational current Ie (A) to IEC 60947-5
Auxiliary contacts OF, SD
Cat. no. 26925 / 26928
Rated operational a 277 V 3
voltage Ue (V) Cat. AC12 220 to 240 V 6
c 12 to 24 V 6
Cat. DC12 48 V 2
60 V 1.5
130 V 1

Common technical data of auxiliary contacts

and releases
Common technical data
Operating temperature when live (°C) -25°C to +50°C

Storage temperature -40°C to +85°C

Dimensions
DB110258

MN, MX+OF OF, SD

90081E.indd version: 3.2