20-SDMS-02 Rev.03.1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 27

Saudi Electricity Company

Distribution Services Sector

SPECIFICATIONS FOR OVERHEAD Issue Date: 07/07/2019 Page: 1 of 4

LINE ACCESSORIES 20-SDMS-02 REV.03.1

20-SDMS-02
Rev.03.1

SPECIFICATIONS FOR OVERHEAD LINE


ACCESSORIES

This document contains proprietary information developed by and for exclusive use of Saudi Electricity
Company (SEC) Distribution Network. Your acceptance of the document is an acknowledgment that it
must be used for the identified purpose/application and during the period indicated. It cannot be used or
copied for any other purposes nor released to others without prior written authorization of SEC
Distribution Services Sector. SEC shall assume no responsibility for any type of misuse and/or
misapplication, and any harm resulting there from. SEC also reserves the right to take any necessary
actions to protect its interest against unauthorized use.
Saudi Electricity Company
Distribution Services Sector

SPECIFICATIONS FOR OVERHEAD Issue Date: 07/07/2019 Page: 2 of 4

LINE ACCESSORIES 20-SDMS-02 REV.03.1

20-SDMS-02
Rev.03.1

SPECIFICATIONS FOR OVERHEAD LINE


ACCESSORIES
Saudi Electricity Company
Distribution Services Sector

SPECIFICATIONS FOR OVERHEAD Issue Date: 07/07/2019 Page: 3 of 4

LINE ACCESSORIES 20-SDMS-02 REV.03.1

Table of Contents
1 Scope .................................................................................................................................. 4
2 Drawings ............................................................................................................................ 4
Saudi Electricity Company
Distribution Services Sector

SPECIFICATIONS FOR OVERHEAD Issue Date: 07/07/2019 Page: 4 of 4

LINE ACCESSORIES 20-SDMS-02 REV.03.1

1 Scope
This sub-revision of the specification 20-SDMS-02 Rev.03 specifies the drawing details
of additional new overhead line accessories for use with concrete and special pole
structures. It shall always be read in conjunction with 20-SDMS-02 Rev.03 and the latest
revision of 01-SDMS-01.
All the drawings and information in this sub-revision of the specification 20-SDMS-02
Rev.03 shall remain active unless a consolidated revision 20-SDMS-02 Rev.04 is
officially published.

2 Drawings

You might also like