DOWLEX™ 2607GC

Linear Low Density Polyethylene Resin www.ulprospector.com

The Dow Chemical Company
Technical Data
Product Description
DOWLEX 2607 GC Polyethylene Resin is specifically designed for large/high output cast film lines to make high performance industrial stretch
films.

Films made from DOWLEX 2607 GC Polyethylene Resin exhibit an excellent balance of processability, mechanical and stretchability
performance properties.

DOWLEX 2607 GC Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between
10 and 35 microns.

Complies with:
• EU, No10/2011
• U.S. FDA FCN 741
Consult the regulations for complete details.
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet
Search for UL Yellow Card • The Dow Chemical Company
Availability • Europe
Additive • Antiblock: No • Processing Aid: No • Slip: No
Agency Ratings • EU No 10/2011 • FDA FCN 741
Forms • Pellets

Physical Nominal Value Unit Test Method

Density / Specific Gravity 0.918 g/cm³ ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) 2.3 g/10 min ISO 1133
Films Nominal Value Unit Test Method
Film Thickness - Tested 23 µm
Film Puncture Energy (23 µm) 160 J
Film Puncture Force (23 µm) 44.0 N
Tensile Strength ASTM D882
MD : Yield, 23 µm 8.00 MPa
TD : Yield, 23 µm 8.00 MPa
MD : Break, 23 µm 35.0 MPa
TD : Break, 23 µm 29.0 MPa
Tensile Elongation ASTM D882
MD : Break, 23 µm 460 %
TD : Break, 23 µm 700 %
Dart Drop Impact (23 µm) 150 g ASTM D1709A
Elmendorf Tear Strength ASTM D1922
MD : 23 µm 190 g
TD : 23 µm 420 g
Film Stretch Performace - Max Elongation Internal Method
23.0 µm 350 %
Film Stretch Performace - Max Stretch Force Internal Method
23.0 µm 37000 g
Additional Information
Film Properties: Cast Film fabrication at 250 m/min.

1 of 3 Form No. TDS-234743-en

UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved. Document Created: Wednesday, June 23, 2021
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: September 2013
Last Updated: 6/30/2014
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
DOWLEX™ 2607GC
Linear Low Density Polyethylene Resin
The Dow Chemical Company www.ulprospector.com

Extrusion Notes
Fabrication Conditions For Cast Film Extrusion:
• Chill Roll Temperature: 20 - 40°C
• Melt Temperature: 220 - 280°C
• Recommended Gauge Range: 10 - 35 µm

Notes
1 These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature
from the supplier.
2 Typical properties: these are not to be construed as specifications.

2 of 3 Form No. TDS-234743-en

UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved. Document Created: Wednesday, June 23, 2021
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: September 2013
Last Updated: 6/30/2014
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
DOWLEX™ 2607GC
Linear Low Density Polyethylene Resin
The Dow Chemical Company www.ulprospector.com

Where to Buy

Supplier
The Dow Chemical Company
Telephone: +1-800-258-2436 (Americas); 00800-3-694-6367 (Europe, Middle East, Africa, and India); +800-7776-7776 (Asia Pacific)
Web: http://www.dow.com

Distributor
RESINEX Group
RESINEX is a Pan European distribution company. Contact RESINEX for availability of individual products by country.
Telephone: +32-14-672511
Web: http://www.resinex.com/
Availability: Europe

3 of 3 Form No. TDS-234743-en

UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved. Document Created: Wednesday, June 23, 2021
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: September 2013
Last Updated: 6/30/2014
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.