How to install a CCcam server on Windows

In this tutorial, we are going to install and run a CCcam server on Windows, and as we know
CCcam is programmed to run on Linux, well, it's still the case here and in order to install our
server, we have to run CCcam on a Virtual Machine (VM) that has a Linux OS installed on it

The trick is not installing Linux on Windows and running it as a VM, many do that already
using VMware Player or Microsoft Virtual PC,the trick is to make this VM be fully recognized
by Windows and it self as a server that has it's own physical MAC-address and thereby it's
own IP in the router.

To sum it all, we are going to trick the router that we are running a physical PC somewhere
and that PC is physically connected to that router, in order to obtain an IP in the router so
the Virtual Linux OS (OS means Operating System such as Windows XP, Vista, Ubunto,
Opensuse..etc), can send and receive data over that router, and in this tutorial we are going
to use Clarkconnect as a Virtual Linux OS.

I choose Clarkconnect as a Virtual server because it's secure, small, fast, stable and does
not require much of disk space or RAM, don't be surprised if we used 2GB of hard disk space
along with only 512MB RAM and our Clarkconnect Virtual server will actually only uses less
than half of the disk space and about 250 MB of the RAM we are going to allocate for this
Virtual Server.

If that have given an idea of what we are going to do then lets get started...we need tools do
so...

The tools:

1: Clarkconnect Community Edition as Virtual OS

Download

2: VMware Player as our VM ( Requires a small registration )

Download

3: Pre-configured Clarkconnect VMware Virtual disk and configuration files (32-

bit)

With 2GB HDD and 512MB RAM

*Use if you don't want to compile the Kernel

Download

Specifications:

32Bit Guest VM
One CPU and 512MB of RAM
One Hard disk of 2GB space
One physical CD/DVD-ROM
One virtual CD/DVD-ROM
One Bridged network adapter ( bridged to VMnet0 )
One Serial Port ( COM1 )
One USB controller

(MD5 checksum = 7c54a3017fcd173f4495e0116db61f2f

*Clarkconnect_VMX_pre_configured.zip)

With 6GB HDD and 1GB RAM

*Use if you want to compile the Kernel

Download

Specifications:

32Bit Guest VM
One CPU and 1GB of RAM
One Hard disk of 6GB space
One physical CD/DVD-ROM
One virtual CD/DVD-ROM
One Bridged network adapter ( bridged to VMnet0 )
One Serial Port ( COM1 )
One USB controller

(MD5 checksum =55573aca29b70cadea7b6e564f339af3

*Clarkconnect_VMX_pre_configured_6GBHD.zip)

4: VMXBuilder as a VMware Virtual disk and configuration file builder

Download

If the authors homepage is down, then use these links:

Version 0.9.10: Download

(MD5 checksum=3a63e8db4b0b7146a846d566593cef6b *VMXBuilderSetup.zip)

(MD5 checksum= da851dd5ff3bf526ac7dec5d66fb4fcb *CoreSetup.zip)

5: CCcam CS program

Download links are found in CCcam Zone

6: WinSCP

WinSCP is an FTP program that is capable of connecting using a secure connection (SSH), we
will use it to configure the server

Download

Optional

1: TrayIt!, the program sends any running program on taskbar to the system tray

Download

2: Nftytool V.1.1 for Infinity USB and Infinity USB Phoenix Card-readers ONLY

Download
3: Inadyn, is a dynamic IP updater

Download

4: Putty

Download

Download the ZIP archive if you don't want to install it on your system.

P.S. The MD5 checksums for the archives above are not passwords, they are there to
confirm that the archives are uploaded by me and if an archive doesn't carry that hash-
number I have provided here for it then the archive is not mine and have been modified by
someone else, you can use MD5summer (Home of the MD5summer) to make sure of that.

Before we start:

I would like to inform a little about Clarkconnect VMware Virtual disk and configuration files
provided for download above:

These are made using VMXBuilder, the easyvmx site that I have linked to in the earlier
version in this tutorial is actually using VMXBuilder to generate the VMware configuration
files without mentioning this program at all and I thought, as all of you, that they stood
behind the development of the VMware configuration files but they are not.

I found about that when I started searching the internet to see if others are facing the same
problem as we have due to the COM-port in the Virtual Server created does not work at all,
and that means that the there is something wrong with the VMware configuration for the
COM-port, however, I found the authors homepage after much searching and along with
that, I found out that they have been working on VMXBuilder since 11/05/2005.
LINK

After using this program to generate the configuration files I have no problem using the
COM-port which now works flawlessly, and as you can see, the credit should go for the guys
that stand behind this project and not for easyvmx.

Later on, I'm going to guide you through VMXBuilder and you can then make your own
configurations using VMBuilder if you decide to use another OS than Clarkconnect or you
have another Host OS than Windows XP.

Let's get started....

1. Configuring Network adapters:

*These steps are very important*

1. Install VMware Player on your system, when done, head over to Network Connections
in Control Panel,right-click your physical network adapter and choose Properties...make
sure that VMware Bridge Protocol is checked, if not, check it and hit OK as shown below..
2. Brows to : Program Files\VMware\VMware Player folder and click on vmnetcfg, when it
starts choose the tab Host Virtual Network Mapping and change VMnet0 from Briged
to an automaticlly chosen adapter to your own physical network adapter, hit Apply and
OK.. to your own physical network adapter, hit Apply and OK..
3.Create a folder on drive C:\ and name it Clarkconnect, then extract the archive
Clarkconnect_VMX_pre_configured.zip and copy the content of the folder to the Clarkconnect
folder we created earlier on drive C:\, when done copy the Clarkconnect ISO-image that you
have downloaded to the same folder and rename the ISO-image to Clarkconnect.

* You can burn the Clarkconnect ISO-image to a CD and install it from your CD/DVD Drive if
you want, but I have chosen to use VMwares own virtual CD/DVD-ROM drive because it's
faster, that's why I choose to copy the Clarkconnect ISO-image to the Clarkconnect folder
on drive C:\.
2. Configuring and making the VMware configuration file:

*If you choose to have your own Virtual Server configuration then use this part, but if you
find that the pre-configured Clarkconnect VMX provided for download above will do the job
then you can easily move to part 3 of this tutorial.
Install VMXBuilder and run the program

The porgram should place a shortcut on your Desktop, otherwise, the program is located on
Start ->All Programs ->RDPSoftware ->VMware ->VMXBuilder

Choose Create New Virtual Machine

Choose the location that you want to save the configurations files to
*I recommend that you save the configuration files to C:\Clarkconnect
Choose a name for you Virtual Machine
As showen below on the Options-Tab on General options, I changed the VM and VMX-file
names to the name of the ISO-image that I'm using.
It's important that the Target Platform is : Workstation and the Version is : 5.5 , that will
make the configuration flexible, it's still targeted at VMware Workstation version but we will
still be able to use it with the VMware Player. The Guest-OS should be Linux.
The Kernel version of the Clarkconnect I'm installing is 2.6 , if you are installing an other
Linux Guest-OS then you should follow your Guest-OS Kernel.

The Working Directory should be the location of your Guest-OS installation directory, it's
C:\Clarkconnect in this tutorial.
Change to the Hardware-Tab and give your Virtual Motherboard a name.

As we are using the Player version of VMware and not the Workstation version, we should
choose to have only one processor.
Choose the size of the Memory, 512MB is enough for Clarkconnect.
You can add a Floppy to your configuration if needed.
There is no need for SCSI controller, you can easily disable it here.

I recommend that the Virtual OS to uses the defaults of your Windows for the monitor
configuration, and 16MB of RAM should be enough.
We need to add our hardware to the configuration, starting with the Hard disk, Choose Add
and highlight the Hard Disk and hit OK.
When the Hard Disk is added click on Create New in the field Disk file, you only need to
choose a location for the Disk file (Clarkconnect folder in this tutorial) by clicking on Select
Folder and choosing the location...I suggest that you leave everything other than that at it's
default unless you need more Disk space, then change the parameters on the field Disk Size.
The Disk file is created and is saved to the Guest-OS installation directory, hit OK to move
on.

We need a CD/DVD-ROM linked to the physical DVD-ROM on our PC, Click Add and highlight
the DVD-ROM icon and then hit OK.
I recommend that you enable the CD/DVD-ROM when you need it, un-check Connected at
Boot and leave the Auto Detect checked unless you need to link it to a specific CD/DVD-ROM
if you more than one of them.
Click on Add again to create another CD/DVD-ROM, this one is virtual and it will be linked to
the Clarkconnect.iso image, click on the small button near the field Use ISO Image to brows
to the location of the ISO-image.

*This part is optional, do it only if you need the VM to read from the ISO-image itself.
Still no need to be Connected at Boot.
We need a Network adapter, click on Add, highlight the Network adapter and hit OK.
It needs be Connected at Boot and choose the Intel E 1000 Network adapter and make
sure that it's bridged and VMnet0 is the link, if not then you have missed Part 1 on this
tutorial. You can choose your own MAC-address or leave the VMware generate it, I suggest
that you leave it at Automatically Generated unless you know what you are doing.
Hit Add, choose the Serial Port Icon and hit OK to install a COM-port

*If your PC have more than one COM-port, then you can repeat this step again to install as
many Serial Ports as your system have.
I recommend that you activate it when it's needed and I recommend that you lock it to the
COM-port you are planing to use.
Installing a USB Controller can be done the same way, hit Add and choose the USB-
Controller icon and OK to confirm,here is the result.
When you have done adding the needed hardware for your Virtual OS, then you need to
save the configuration...hit the button Save above as shown in the picture below.
And then hit OK.
3. Installing Clarkconnect:

If you have done all the steps above, then click on the Clarkconnect file that you have
saved to C:\Clarkconnect and VMware Player should start, if your are using the virtual CD-
ROM drive VMware will not detect the ISO-image just yet, so we need to enable the virtual
CD-ROM drive next.
Notes:

A. If you click on VMware Player window then your mouse and keyboard will be enabled
ONLY in the VMware Player window, to release them hold Ctrl and Alt on your keyboard.

B. If you are using MAC-address filtering in your routers, then you need to pick the MAC-
address shown at this part and enter it in your router, it's the blured text in the picture
below

*Enabled physical hardware such as CD/DVD-ROM drives, sound card and COM-port, will be
unavailable for your Windows if they are enabled on the VMware Player window, you need to
disable them for VMware Player in order to make them available for your Windows again.

The physical CD/DVD drive of your PC is "CD-ROM (IDE 1:0)" and the virtual CD-ROM drive is
"CD-ROM (IDE 1:1)" in this tutorial.
Enable the virtual CD-ROM drive by clicking on it's button as shown.
Check if your virtual network adapter is connected and bridged
Connect the COM-port (if needed).
Restart VMware by clicking on VMware window and holding the buttons Ctrl+Alt+Insert on
your keyboard (Insert not Delete, Insert button is next to F12), hit Enter to start the
installation
Notes:

1. To Navigate in the installation window, you need to use your keyboards buttons Tab
and/or keyboard arrows
2. Space to Mark
3. Enter to Confirm

Choose Installation Language

Choose Keyboard Type

Choose Installation Source
Choose Installation Type
Confirm Installation, you need to write linux here
Choose System, Standalone-Mode here for your server
Note:

I recommend that you give your server a static local IP, you can log in your router and check
the range for the local IPs allowed by your router as local clients, to give you an example, if
the range allowed by your router is between 192.168.0.100 to 192.168.0.149 then give your
Virtual Server a local IP that is 192.168.0.120 (example) this local IP is far from the
connected devices that has DHCP enabled, such as your physical PC, Dreambox..etc..these
clients will reserve the unused IP closest to 192.168.0.100 when disconnected and re-
connected, so giving your Virtual Server an IP far from the closest IPs to 192.168.0.100 will
eliminate any chance for an IP-conflict that may happen,and thereby the Virtual Server will
always gets the IP that you have assigned for it.

Un-check Use dynamic IP configuration using the Space-button and do as follows using
keyboard arrows and number buttons:

1. Enter the static local IP of your choice in IP address

2. Move down to Netmask and leave it at 255.255.255.0
3. Move down to Default getway (IP) and change this to the IP of your router(the IP that
you enter in your browser to enter and change/open ports on your router software).
4. Move down to Primary nameserver and here you can choose to enter the IP of your
router again or the IP of your Internet provider DNS Server.

Choose the Name of your server

Select your TimeZone
Choose the root password
Choose the Modules you need to install, you don't need any of these modules for running a
CCcam server but I recommend that you install the Intrusion Detection and Prevention
modules though
Your Adsense Code
Confirm your server settings to start installation
The server is being installed, that will take about 1 minut, I'm not kidding!
Reboot your server, installation is done!
Your server is starting
4. Configuring the server:

We will now configure the server, and this time we will do it in a

very easy way that is much easier than before for anyone to install,
configure and run CCcam on Linux in general, even for those who
have never tried using a Linux OS before.

I will show that next using WinSCP...so you need to download and
install WinSCP from the link above, the program will leave a
shortcut on your Desktop, start WinSCP from there and let's begin...

This is what you see when you start WinSCP, you need to enter the
local IP of your server, root as user and the root password you
have chosen when installing Clarkconnect

You will be greeted with a warning, If this is the first time you are
installing the server choose Add, choose Update if you have re-
installed your server
This how it will look like when you have logged in, the left side is
your Windows and the right side is your Server..this is not the /
<root> directory but the /root directory, we have to move to the /
<root> directory which you can do by double-clicking on the the
first folder that is marked with an arrow, double-clicking on this
folder will always take us to the displayed folders/files Main
directory...I will call it Main Directory from now on, let us move
to the Main Directory by double-clicking on this icon.
We are now in the var directory...right-click in an empty space and highlight New and
choose Directory, you can also press F7 on your keyboard for the same effect
Name the new directory to bin
Let us make a new directory the same way as we did earlier
Let us name this new directory etc
This is how it looks now after we have created these two directories
Double-click the var directory to enter it.

Now download and extract the CCcam archive of your desire from the links above,enter the
extracted archive from the Windows window on WinSCP or just open the extracted folder
from it's location then simply drag and drop the file CCcam.x86 from the opened folder or
the the Windows side in WinSCP to copy it over to the var directory
Click on Copy to confirm
Right-click the copied CCcam.x86 file and choose Properties or simply highlight the file and
hit F9
Change the number in the field Octal to 0755 to make CCcam.x86 executable and hit OK

Move back to the Main Directory of bin which is var and enter the etc directory which we
have created earlier, drag and drop the file CCcam.cfg to the etc directory to copy it
Click on Copy
Now move to the / <root> directory through Main Directory icon and enter the directory etc
( this is not the etc directory that we have created in var, this directory is located on /
<root> ) then look for and enter a directory named rc.d, look for a file with the name
rc.local, right-click this file and choose Edit or simply highlight it and hit F4

When the file opens add the line below to that file exactly as shown in the picture:
/var/bin/CCcam.x86

This line will execute and start CCcam.x86 right after booting the system, now click on the
save icon in the upper left corner in the menu, or just close the file and choose Yes to save
the changes.
Now move through Main Directory icon to th e / <root > directory to var then toet c, we wil
look into adding the server configuration lines and connection lines to CCcam.cfg file
5. CCcam server configuration lines:

The CCcam server configuration lines are lines that are added to the CCcam configuration
file ( CCcam.cfg ) that tells CCcam how to operate, what TCP port to use, which reader is
located on which USB-port or Serial-port and in some cases how to read a card and on what
frequency the card should operate...the configuration lines for a PC based server differs from
the configuration lines used on Dreambox because these lines should be limited because of
the difference of a Dreambox and a PC server hardware and software, in other word, the
configuration lines should only be as many as the PC server really need and no more than
that...

Configuration lines that I recommend are:

*The parameters in Red are to be replaced with parameters of your own choice.

SERVER LISTEN PORT : portnumber

HTML INFO LISTEN PORT : 16001
ALLOW TELNETINFO: no
WEBINFO USERNAME : username
WEBINFO PASSWORD : password
SHOW TIMING : yes
DEBUG : yes
DISABLE EMM : yes
EXTRA EMM LEVEL : no
MINIMUM DOWNHOPS: 1
LOG WARNINGS : /var/etc/warnings.txt
You also need to add a line for the connected reader:
PHOENIX READER PATH : /dev/ttyS0
*This is for a serial reader connected on COM-port 1, change to ttyS1 for COMport 2 and so
on.

or

SERIAL READER : /dev/ttyUSB0

*This is for a USB reader connected to USB-port 1 change to ttyUSB1 if your reader is on
USB-port 2 and so on.
You can add these to lines below if you need to know what providers are the cards of your
peers have or what channels are being requested from your server:
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers

*You can find these files (Ccam.channelinfo and CCcam.providers) in the htdocs directory
of the CCcamInfoPHP program, they should be uploaded to the same directory as
CCcam.cfg (/var/etc).
Those were the lines that I recommend...now back to how to add them and possible F-lines
and C-lines to CCCam.cfg, if you have browsed back to /var/etc, just right-click the file
CCcam.cfg and choose Edit or highlight the file and hit F4
Just get the text down hitting Enter from the first line of the text (you might need to read it
if you need it someday) and add the lines as shown below

C: peer.dyn.host port user pass no { 0:0:2, 100:3, 100:4, 100:5, 100:9, 100:A, 100:c, 100:d,
100:E, 100:f, 100:10, 100:11, 100:12, 100:13, 100:14, 100:19, 100:1A, 100:1B, 100:1c,
100:1d, 100:20, 100:21, 100:25, 100:26, 100:29, 100:2E, 100:31, 100:33, 100:34, 100:37,
100:64, 100:66, 100:67, 100:6b, 100:6d, 100:70, 100:71, 100:72, 100:73, 100:8C, 100:A0,
100:A1, 100:A2, 100:A3, 100:100, 100:8227, 100:beef, 100:ffff, 500:80, 500:500, 500:1540,
500:1570, 500:2100, 500:2500, 500:4800, 500:5500, 500:7000, 500:7010, 500:8000,
500:8800, 500:8c00, 500:8c10, 500:9c00, 500:9C10, 500:9C20, 500:9C30, 500:9C40,
500:a000, 500:A800, 500:A810, 500:A820, 500:AC00, 500:B400, 500:C, 500:C010,
500:C020, 500:C030, 500:c400, 500:c410, 500:C800, 500:C810, 500:C820, 500:C830,
500:C840, 500:C850, 500:C860, 500:C870, 500 400, 500 540, 500 800, 500:e400,
500:E410, 500:E430, 500:E440, 500:E450, 500:E470, 500:E800, 500:F000, 500:F520,
500:F800, 500:10c00, 500:10c10, 500:10c20, 500:10c30, 500:11000, 500:11c00,
500:12000, 500:12010, 500:12800, 500:12810, 500:12C00, 500:13400, 500:14400,
500:14800, 500:14880, 500:14C00, 500:15000, 500:16400, 500:16800, 500:16810,
500:16C00, 500:16C10, 500:16C20, 500:17000, 500:17010, 500:18c00, 500:19000,
500:19400, 500:19410, 500:19420, 500:19430, 500:19440, 500:1a400, 500:1ac00,
500:20600, 500:20610, 500:20620, 500:20630, 500:20640, 500:20a10, 500:20a20,
500:20a30, 500:20B20, 500:20c00, 500:20c10, 500:20c20, 500:20C30, 500:20C40,
500:21510, 500:21570, 500:21c00, 500:21C10, 500:22100, 500:22110, 500:50000, 618:0,
924:0, 9A0:0, d00:4, d00:8, d00:14, D00:64, D00:68, d01:50, d01:54, D02:80, D02:88,
d02:8c, D03:B0, D03:C0, D03:C4, d03:c8, D04:14, d05:c, d0c:c, d0c:10, d0c:14, d0c:18,
1702:6a, 1800:1, 1800:101, 1800:801, 1800:901, 1800:1201, 1800:1301, 1800:1811,
1800:1911, 1800:4001, 1800:4101, 1800:4601, 1800:4701, 1800:4801, 1800:4901,
1800:4A01, 1800:4B01, 1800:6E01, 1800:6F01, 1800:7001, 1800:7101, 1800:7401,
1800:7501, 1800:9401, 1800:9501, 1800:C001, 1800:C101, 1801:7811, 1801:7911,
1802:8C11, 1802:8D11, 4aa0:0 }

6. Connecting to the server Web-interface (Dashboard)

You can log into the Clarkconnect web-interface to check connections, see diagrams about
upload/download of data, enabling firewall, installing other modules such as wireless module
for a wireless connection...you can also turn the server off or restart it from the web-
interface, logging in is easy as follows:

Let us say that the IP that is assigned to your eth0 is ( example ): 192.168.0.120
Then, start your Internet Explorer and type: https:192.168.0.120:81 and hit Enter

*Writting the IP address alone or. http:192.168.0.120:81 will result nothing, the "s" in the
"https" means that your are requesting a secure connection to port 81 on your server in
order to log in .
Log in using Internet Explorer 6

A Security Alert will appear, you need to accept the secure-connection certificate to logon,
hit Yes to accept
Write root as user and type your root password to log on the server
Log in using Internet Explorer 7

Click on Continue to this website

Enabling or disabling firewall

Choose Network and click on IP Settings, here you can turn the firewall on and off by
changing between Standalone-Mode and Standalone Mode-No Firewall and if you
choose to turn the firewall on, then you need to open the TCP ports for your CCcam server,
Putty and Webinfo...etc..click on Continue to confirm the changes.
If we choose to turn the firewall on then we need to open the ports for the services we would
like to use, so choose Network and click on Incoming from the sub-menu...here you can open
ports to services you would like to use, it's simple:

1. Write the name of the service in the field Nickname/port, like CCcam and Putty..etc..
2. Choose the TCP or UDP port for the service (CCcam and PuTTy uses TCP-ports)
3. Choose the portnumber
4. Click Add to open the port
*Important: You need to register your copy of Clarkconnect to get updates and download
modules, the registration takes about 2 minutes and truly painless, they only need a user
name and a password and you can register while you are on Dashboard, to register choose
"System" and click on Register System.*
7. Installing Inadyn (Optional):

nadyn is a Dynamic IP Updater, you might need it if your IP is dynamic and you don't trust
your routers Dynamic IP Updater (I know that I can't trust mine).

1. Download Inadyn from the provided link in The Tools and extract the Inadyn archive to
your Desktop, look in inadyn-mt\bin\linux folder and copy the inadyn-mt program to the
/var/bin folder which is the same location of CCcam.x86.
Right-click the indayn-mt program and choose Properties or highlight it and hit F9

Change the Octal to 0755 and hit OK

Move again to the / <root> directory using the Main Directory icon, then enter the
directory etc on the / <root> directory ( this is not the /var/etc directory ) and enter the
folder rc.d, right-click the file rc.local and choose Edit or highlight it and hit F4
 Add this line right under the line you have added for CCcam.x86 to make it start
inadyn after boot:

Code:
/var/bin/inadyn-mt --background --username your_dyndns_name --password
your_dyndns_pass --update_period 300000 --alias your.dyndns.xxx --log_file
/var/etc/inadyn.log

And remember that you have to keep the line in one piece as shown below
You need to change the parameters in red to your own:

your_dyndns_name: replace with your dyndns login user name.

your_dyndns_pass: replace with your dyndns login password.

300000: this is the update period in ms 1ms=1/1000s, if you do the math, this 5 minutes, 1
minute is 60000ms

your.dyndns.xxx: replace with your own dyndn host name, example: user.dyndns.org.

Other parameters:

--background: Inadyn will start as a daemon in the background of your system.

/var/etc/inadyn.log: this where the Inadyn log file will be placed I choose to place it with
the CCcam.cfg file so it will be easier to find, you can read it by opening it as you open
CCcam.cfg.

Inadyn will now connect every 5 minutes (or the amount of time you have chosen) to update
your Dynamic IP.

8. Installing the USB drivers and nftytool( Optional ):

*nftytool is a program that should be used for Infinity USB and Infinity USB Phoenix ONLY!!,
but you need to install the USB drivers for all card-readers
The USB drivers are not installed in Clarkconnect by default, and that's why you need to
install them first...Download, install/extract and run Putty, write the local IP of your server
and hit Open
*You need to log in as root and use the root password, just as you did log in the server
earlier with WinSCP.
You will be met with a security warning, hit Yes to move on
Copy these commands from here and right-click in Putty to execute the following commands
(if you don't like to write much) :

1. apt-get update

2. apt-get install libusb-devel

*write y and hit Enter when prompted to download and install.

3. apt-get install gcc

*write y and hit Enter when prompted to download and install.

Download ntfytool (v1.1) and copy it to the home directory on your server, the home
directory is located on the / <root> directory, then write in Putty:

cd /home

tar -zxvf nftytool-1.1.tar.gz && cd nftytool-1.1

mkdir /var/nftytool
*This will make a directory for nftytool on /var.

cp * -r /var/nftytool
*This will copy the content of the nftytool-1.1 folder to the nftytool folder created last step.

cd /var/nftytool
./configure

make

Now the installation is done, you need to execute a command to start the program:

./nftytool -p phoenix -- -p phoenix -f 3.58 -e

*For 3.58MHz

./nftytool -p phoenix -- -p phoenix -f 3.68 -e

*For 3.68MHz

./nftytool -p phoenix -- -p phoenix -f 6.00 -e

*For 6.00MHz

You need to execute the command of the desired speed for your card in the nftytool folder
once when you start it and again if you shutdown your your system (not the Virtual Machine)
and start it later, not when rebooting.

*As long as the Infinity USB Phoenix gets power through the USB cable, then it will still
function as it configured, only when it loose the power, then the command need to be
executed to configure it again.
So if you shutdown your system and start it again later you need to execute these lines
again in Putty:

cd /var/nftytool

./nftytool -p phoenix -- -p phoenix -f x.xx -e

Your Adsense Code

*x.xx are the desired speed of your card

By the way if you are using the Infinity USB Phoenix then both the USB and the Serial ports
must be used...this reader is powered by the USB cable but uses the Serial cable when set to
Phoenix mode

The path for the COM-port in the CCcam.cfg is:

PHOENIX READER PATH : /dev/ttyS0

9. Configuring and compiling the kernel ( optional )

The Linux Kernel is the heart of all Linux OS as it contains all the drivers that are supported
by Linux at the same time program operate differently based on which Kernel version is
installed and how the Kernel will allocate resources such as RAM CPU usage...configuring
and compiling the Kernel is easy but takes between 40min. to 1? hour all depends on your
system, you need also to know that you need around 6GB as harddisk space to compile a
Kernel (the actual space used when compiled will be around 1.2GB-1.4GB, the extra space is
needed for compiling only). In the period that I have used Linux systems I know for sure that
compiling the Kernel will bring more stability to the system, beside that some programs
cannot be installed on an un-compiled Kernel...drivers like iuu-Phoenix that should be used
for Infinity USB Unlimited cannot be installed in un-compiled Kernel, so keep that in mind,
just remember that many systems will run fine without compiling the Kernel, but if you feel
that your system is unstable or you want to try and see if compiling will bring more stability
to your system or you want to try it and see if your system will benefit from it then here is
how to compile the Kernel.

Configuring the Kernel

Log in as root using Putty, and execute the followings:

apt-get update

apt-get install cc-devel

apt-get install kernel-source

*If your system is supported by more than one kernel-source, then you might need to
execute the kernel-source followed by the kernel-source number, such as apt-get install
kernel-source#2.6.18.92.cc4
apt-get clean

Now the Kernel is downloaded to the location /usr/src (I will be using Kernel 2.6.18.92.cc4
as reference here but you have to change that to the kernel version that have been installed
on your system), so execute:

cd /usr/src

ls
*This will show the folders and files in the directory /src
cd linux-2.6.18-92.cc4

make oldconfig

You can execute make menuconfig, but if you don't know what to choose as hardware and
software, then keep it at the default configuration of the kernel-source by executing make
oldconfig.

Compiling the Kernel

Execute in the kernel-source directory:

make mrproper

make ; make modules_install ; make install ; make clean

This command is four commands in one lines, this will compile the Kernel, install the drivers,
install an image of the Kernel and then clean the temporary folders and files that have been
extracted, as I wrote earlier, the compile will take between 40min. to 1? hour, when done,
we need to modify grub.conf which is the configuration file for the boot manager program
grub in order to boot using the compiled Kernel..execute:
nano /boot/grub/grub.conf

You will then see this text file which we need to make one change to, simply change the line
default=1 to default=0

When done, hit Ctrl and O (O not Zero) then hit Enter to save and Ctrl and X to exit the
editor.

Execute:

reboot

exit

When your PC have finished rebooting log in the Clarkconnect Dashboard and choose
Reports > Current Status and you will be met with this picture

10. Running the server in the background ( optional ):

VMware Player will run on taskbar, I don't know about you, but I like to run the programs
that don't use all the time in the background, but like to see them in the System Tray
( Notification Area ), so I know what's running and if the program is still running in the
background.
To that purpose I used a free software called TrayIt!, it's very simple to use and I must say
that it did the job very well, and the server kept running in the System Tray without a crash
when I have minimized the VMware Player window...the program is a standalone and don't
need to be installed on Windows, all you have to do is run the program from it's folder.

I extracted it from archive and copied the folder to my Clarkconnect folder so I remember
to start it when I start the server.

Configuring it is simple as you can see below

At the end of this tutorial, we have made and successfully configured our server,and yo
might think that it took a long time to install, in fact I have installed it several times to chec
how long it will take to install, it actually took around 40 minutes to be fully functional an
online!

Some might say that I keep repeating the word Serve r notCCcam-Serv er, well, that i
what it is actually...Running CCcam on it is only the tip of the iceberg, what we have now is
fully functional server, it could be an FTP server or a Mail server or any server that need t
do a certain job, and what is most amazing about this server is

1. Does not require a separate PC to run on

2 . Does not require much resources such as RAM and Disk space
3 . Can run in the background of your Windows that you have on your PC just like any othe
program
4 . Very secure
5 . Very fast
6 . Very reliable
7 . Does not need to be re-installed and re-configured every time you need to re-install you
Windows or to format the drive you have your Virtual Server folder on, simply copy th
Virtual-O S-folder ( in this tutorial it's the whole
Clarkconnec t folder that we have create
on drive C:, around 1.6GB !!) to another drive, reinstall your windows or format the drive yo
want to format, install VMware Player and configure the network adapter if you have re
-installed Windows as in part 1 in this tutorial, copy your Clarkconnect folder back to it'
location and hit the file Clarkconnec t to start the server and see the magic

On the other side, the only downside I can see is that you need to keep the PC you hav
installed your Clarkconnect server on turned on all the time

I hope that you have enjoyed this tutorial, and that you can make use of it...if you feel tha
this tutorial has been useful and you like to thank me then please use the thanks button
thank you