Scribd
Upload
225 views2 pages

Occupational Health and Safety Procedures: Computer-Hardware-Servicing

1. The document is a learning activity sheet from the Schools Division of Zamboanga del Norte in the Philippines that covers occupational health and safety procedures for computer system servicing. 2. It discusses the importance of safety for computer technicians and defines occupational health and safety as protecting workers' health, safety, and welfare. 3. The document provides 12 personal safety procedures for working with computers, such as powering off computers before working on them, wearing protective equipment, and having contingency measures for workplace emergencies.

Uploaded by

Oliver C Silvano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
225 views2 pages

Occupational Health and Safety Procedures: Computer-Hardware-Servicing

1. The document is a learning activity sheet from the Schools Division of Zamboanga del Norte in the Philippines that covers occupational health and safety procedures for computer system servicing. 2. It discusses the importance of safety for computer technicians and defines occupational health and safety as protecting workers' health, safety, and welfare. 3. The document provides 12 personal safety procedures for working with computers, such as powering off computers before working on them, wearing protective equipment, and having contingency measures for workplace emergencies.

Uploaded by

Oliver C Silvano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Republic of the Philippines

Department of education
Region IX, Zamboanga Peninsula
SCHOOLS DIVISION OF ZAMBOANGA DEL NORTE
Bacungan 1 District
LEARNING ACTIVITY SHEET
Computer System Servicing NC II – 9/11
Quarter 1/Week 1
Name: _________________ Grade: ________________________ Score: ________________
Subject: CSS Teacher: Oliver C. Silvano Date: Sept. 13 – 17, 2021
Type of Activity:
Concept Notes Individual Formative Others
Laboratory Pair/Group Summative ____________

Lesson/Topic: Occupational Health and Safety Procedures


Learning Target (s):1.1 Plan unit assembly to ensure OHS policies and procedures are followed in
accordance with systems requirements
1.2 Prepare unit assembly to ensure OHS policies and procedures are followed in
accordance with systems requirements
Reference (s): https://internetcafe.ph/forum/6-hardware-a-devices/653774-12-ohs-procedures-for-
computer-hardware-servicing

Occupational Health and Safety Procedures


Occupational Health and Safety refers to the legislation, policies, procedures and activities that aim
to protect the health, safety and welfare of all people at the workplace.
The first thing that every computer technician should keep in mind is SAFETY. You must think that
electrocution and nasty cuts are the most common injuries a computer technician might have and we need
to avoid it by following simple safety procedures.
Occupational Health and Safety Policy
Occupational health and safety is a cross-disciplinary area concerned with protecting the safety,
health and welfare of people engaged in work. The goal of all occupational health and safety programs is to
foster a safe work environment.
Safety practices should be learned early and always adhered to when working with any electrical
device, including personal computers and peripherals. This is for the protection of not only the people
working with them, but also for the devices themselves. The basis for this process begins with your
Occupational Health and Safety Policies.
Personal Safety While Working Along With PC’s

1. Do not work alone so that there's someone who can take care of you in case of emergency.
2. Clean the area before and after using it to maintain sanitation and prevent accidents.
3. Always power off the computer and unplug the computer before working on it.
4. Take away any liquid near your working area to avoid getting electrocuted or accidentally damaging
computer parts.
5. Be careful with tools that may cause short circuit.
6. Always ground or discharge yourself before touching any part of the computer.
7. Do not use excessive force if things don't quite slip into place.
8. Always wear personal protective equipment's (PPE) in accordance with the organization's OHS
procedures and practices.
9. Hold the components on the edges and do not touch the Integrated Circuit (IC) parts.
10. Make sure that the pins are properly aligned when connecting a cable connector.
11. Use brush, compressed air or blower in cleaning the computer system.
12. Contingency measures during workplace accidents, fire and other emergencies are
recognized.
Exercises / Activities

Multiple Choice. Choose the letter of the best answer. Encircle the letter of the correct answer.

1. Which of the following statements is likely to result in an injury to the operator?


A. Selecting the right tool for the job C. Using a tool with loose handles
B. Wearing safety goggles or glasses D. Keeping cutting tools sharp
2. What does PPE stand for?
A. Protective Preventative Equipment C. Personal Preventative Equipment
B. Personal Protective Equipment D. People's Protective Equipment
3. Why is it important to wear PPE?
A. Because it looks right C. Because it protects you
B. Because it protects the tools D. Because it is what an employer tells you to do
4. Which of the following describes a workplace health and safety hazard?
A. Putting the wet floor sign up after mopping the floor
B. An unanswered health and safety question
C. An activity which cannot be insured
D. Something that might cause harm
5. What is the best way of dealing with a hazard to ensure others are not put at risk?
A. Remove it immediately C. Place a barrier tape around it
B. Leave it for others to sort out D. Display a notice or warning sign
6. How can workers best contribute to a positive and safety culture in the workplace?
A. They should know how to complete work quickly if things go wrong
B. They should report unsafe conditions after an accident has occurred
C. They should report any unsafe conditions as soon as possible
D. They should know the location of the first aid kit and accident book
7. Which of the following is the best method of finding information on workshop equipment?
A. From the health and safety at work manual
B. From the manufacturer's handbook or technical data
C. By discussing it with a senior colleague
D. By contacting the original supplier of the equipment
8. Which of the following would prevent injuries from occurring at work?
A. Keeping the workplace tidy C. Lifting heavy objects with a bent back
B. Wearing light clothing D. Keeping lighting to minimum
9. Refers to the legislation, policies, procedures and activities that aim to protect the health,
safety and welfare of all people at the workplace.
A. Procedure C. Rules
B. B. Regulations D. OHS
10.Which of the following is a contingency measure during workplace accidents, fire and other
emergencies?
A. Always lock the door.
B. Just turn on electronic devices immediately.
C. Check electrical wirings.
D. Put fire extinguisher at the accessible corner of the workplace.
Exercise/Activities

1. C 6. B
2. B 7. B
Prepared by: 3. C 8. A
4. A 9. D
OLIVER C. SILVANO 5. A
Subject Teacher
10. D

Answer - Key

You might also like