Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Wi 091-04

    Uploaded by

    m_armouti
    This document provides work instructions for dark room practice when processing film. It details steps for cleaning and preparing processing solutions, maintaining temperatures, loading and handling film, developing film with attention to time, temperature and agitation, and cleaning equipment.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Wi 091-04

    Uploaded by

    m_armouti
    10 views3 pages
    This document provides work instructions for dark room practice when processing film. It details steps for cleaning and preparing processing solutions, maintaining temperatures, loading and handling film, developing film with attention to time, temperature and agitation, and cleaning equipment.

    Original Title

    WI 091-04

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides work instructions for dark room practice when processing film. It details steps for cleaning and preparing processing solutions, maintaining temperatures, loading and handling film, developing film with attention to time, temperature and agitation, and cleaning equipment.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    10 views3 pages

    Wi 091-04

    Uploaded by

    m_armouti
    This document provides work instructions for dark room practice when processing film. It details steps for cleaning and preparing processing solutions, maintaining temperatures, loading and handling film, developing film with attention to time, temperature and agitation, and cleaning equipment.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 3

    NDT & Corrosion Control Services Work Instruction

    Document # WI 091-4 Page 1 / 3


    Approved By: Issue: 1/1 Date: 20 / 4 / 2000
    Title: Dark Room Practice.

    1. Clean the tank with mild solution and rinse the tank with clean water and dry the tank.
    Then prepare the processing solutions in their respective tanks.

    2. Record the date, and quantity of the prepared solutions.

    3. Maintain the solutions at 20 degree C or 68 degree F.

    4. Do not lower the temperature by adding cold water or ice cubes directly into the solution.

    5. Stir the solution before the start of development.

    6. Do not use the same stirrer for both developer and fixer.

    7. Check all the requirements for loading the film such as lead screens, cassettes, tapes etc.,
    before switching off the white light.

    8. Allow ten minutes for dark adoption, and then start loading the film.

    9. After loading close the film box containing the unexposed films and close the cassettes.

    10. Load the required number of type I film and type II film separately and identify them
    clearly, for suitable exposure.

    11. Carefully handle the film- do not expose to high humidity, excessive direct sunlight on the
    cassette, while in the exposure site.

    12. Unload the film after exposure on a separate table, to prevent the mixture of exposed and
    unexposed films.

    13. Load the exposed films on clean and dry channel hangers. Set the darkroom timer to the
    required time based on the developer temperature.
    NDT & Corrosion Control Services Work Instruction
    Document # WI 091-4 Page 2 / 3
    Approved By: Issue: 1/1 Date: 20 / 4 / 2000
    Title: Dark Room Practice.

    14. Process the film with care paying due attention to TIME, TEMPERATURE, AND
    AGITATION. Do not adjust the time of development for exposure, as this may result in
    change in density, but however SENSITIVITY will be lost.

    15. Before immersing the film in the developing tank check the level of the solution. Film
    should totally immerse in the solution. Add Replenisher to developing tank and not
    water, to bring the level to the original position.

    16. Always use the recommended filters, wattage of the bulb, and the suggested distance from
    the loading table, for the safe light.

    17. Cover the processing solution with lid to prevent oxidation whenever not in use.

    18. Keep the dark room clean, and remember “RADIOGRAPHY STARTS IN DARK
    ROOM AND ENDS IN DARK ROOM.

    19. Clean the processing tanks with mild soap solution, wash thoroughly and dry before the
    next mix.
    NDT & Corrosion Control Services Work Instruction
    Document # WI 091-4 Page 3 / 3
    Approved By: Issue: 1/1 Date: 20 / 4 / 2000
    Title: Dark Room Practice.

    You might also like