R UN H ARD. D REAM B IG .

425
P E R F O R M A N C E
Performance at SAE standard J1995 conditions of
300 ft (90 m) altitude (29.61 in. Hg [100 kPa] barometric
pressure), 77 °F (25 °C) air intake temperature and 0.30 in.
Hg (1 kPa) water vapor pressure with No. 2 diesel fuel
will be within 5% of that shown at the time of engine
shipment. Actual performance may vary with different
ambient conditions.
Curves represent performance of the engine with
fuel system, water pump, lubrication oil pump, air
compressor (unloaded), and with 10 in. H2O (250 mm)
inlet air restriction and with 2.0 in. Hg (50 mm) exhaust
restriction; not included are alternator, fan, optional
equipment and driven components.
Within the recommended cruise range, gear to cruise
at lower engine speeds for best economy, higher engine
speeds for best performance.

ISM 425 FR-2569

S P E C I F I C A T I O N S
Advertised Horsepower 425 bhp (317 kW)

Peak Torque 1550 lb-ft (2102 N·m)

Governed Speed 1800/2100 rpm
Clutch Engagement Torque 700 lb-ft (950 N·m)
Number of Cylinders 6
Bore and Stroke 4.9x5.8 in (125x147 mm)
ISM 425 FR-2697
Engine Displacement 661.0 cu in (10.8 L)
Compression Ratio 16.3:1
Operating Cycles 4 (4)
Oil System Capacity 10.3 U.S. gal (39 L)
Coolant Capacity 12 U.S. qt (11.3 L)
Net Weight
with Std. Accessories, Dry 2070 lb (938 kg)
Installation Drawing Number 3170317
D E S I G N F E AT U R E S
The ISM 425 retains the characteristics that made the Cummins
M11 Plus a world leader - superior fuel economy, low maintenance
costs, and high productivity.
425
Variable Wastegate Turbocharger System - Patented Four-
Step Controller design optimizes turbocharger performance at any APPLICATION AND GEARING
speed and load for maximum engine response and driver
satisfaction. RECOMMENDATIONS
Auto-Tensioning Belt Drive - Self-adjusting for optimum tension
and belt life. Serpentine belt drives both the fan and alternator. The ISM 425 engine is ideal for on-highway applications
Extended Service Intervals - 10-micron LF9001 filter from hauling up to 80,000 lb GCW.
Fleetguard allows up to 20,000 mile (32,187 km) oil change The engine delivers outstanding performance in the 1200-
intervals in normal-duty applications for the ISM 425. 1800 rpm range. For an optimal balance between performance
Cylinder Liners - Patented mid-stop design with advanced and fuel economy gear to cruise in the 1525-1625 RPM range.
surface finish provides longer life and minimizes oil consumption. For cruise speeds greater than 65 MPH it is not recommended
Fully replaceable for faster, easier rebuilds. to gear taller than 1525 RPM @ 65 MPH.
C Brake™ by Jacobs®* - The new Interact System is designed
The chart below lists some of the acceptable combinations
for easy integration of the Cummins C Brake by Jacobs, ensuring
for top gear road speeds between 58 and 68 MPH with
that the engine and engine brake work seamlessly together.
approximate engine speeds in the 1500-1700 RPM range.
Water-In-Fuel Sensor - Optional fuel filter combines water
These gearing combinations provide the full advantage of the
separator with water-in-fuel sensor to alert drivers to contamination
performance and fuel economy benefits of the ISM 425. For
that could cause performance problems.
gearing recommendations specific to your application consult
REPTO - The Rear Engine Power Take-Off option has advanced
your truck dealer or Cummins distributor.
electronic controls.
Smart Accessories - Optimize usage of fan and air compressor Engine Cruise RPM with 516 rev/mile Tires
for increased fuel economy. Transmission 9/10 9/10 9/10 9/10
Cylinder Head - One-piece cylinder head made from premium
Top Gear Ratio Direct Direct 0.74 0.74
casting increases block strength.
Piston - Articulated design featuring forged steel crown and Rear Axle Ratio 2.85 3.06 3.73 3.90
aluminum skirt allows for higher top ring position optimizing fuel MPH 60 --- 1579 --- ---
efficiency.
High-Capacity ECM - New space-efficient Electronic Control 62 1519 1631 --- 1538
Module packs ten times more memory and ten times more 65 1593 1710 1542 1612
processing power into a smaller unit. Expanded memory lets 68 1667 --- 1613 1686
you add features at a later date without changing the module.
Located for easy accessibility. Enhances capabilities to use
Cummins information products for management reporting
and diagnostics.
V O C AT I O N A L
Electronic Features - The Interact system includes full-authority
electronics and is fully customizable. Features include diagnostics,
RECOMMENDATIONS
asset protection, PTO, trip information, road speed governing, Vocational applications require special attention to low speed
adjustable low idle speed, engine protection system, choice of maneuverability and startability. Therefore, the overall gear
engine governors, SAE J1587 and J1939 data links, real-time reduction (lowest transmission gear X rear axle ratio) for
clock, Driver's Reward, Anti-Theft, and idle management features. mechanical transmissions should be approximately:
On/off highway 60:1
*C Brake is a trademark of Cummins Engine Co. Jacobs is a
registered trademark of Jacobs Vehicle Systems. Dump 70:1
Mixer 100:1
CUSTOMER SUPPORT It is recommended to gear vocational trucks to operate in the
1700-2000 RPM range. For automatic transmission and other
Service Network – Cummins engines are backed specific gearing recommendations, consult your truck dealer or
by over 3,500 authorized service outlets with strategic Cummins distributor.
locations in every state and province.
Engine Cruise RPM with 501 rev/mile Tires
Customer Assistance Center – 1-800-DIESELS
(1-800-343-7357). Cummins specialists provide technical Transmission 8LL 8LL 9MLL 9MLL
assistance, service locator and product literature 24 Top Gear Ratio 0.74 0.74 0.73 0.73
hours/day, 365 days/year.
Rear Axle Ratio 4.88 5.29 4.88 5.38
MPH 55 1658 1797 1636 1804
60 1809 1961 1785 1968
Cummins Engine Company, Inc.
62 1870 2027 1844 ---
Box 3005
Columbus, IN 47202-3005
65 1960 --- 1933 ---
U.S.A.
If this 2100 RPM governed engine is used in linehaul applications
Phone: 1-800-DIESELS (1-800-343-7357)
Fax: 1-800-232-6393
follow the linehaul rating gearing recommendations.
E-mail: [email protected]
Internet: http://www.cummins.com
Cummins has always been a pioneer in product improvement.
Bulletin 4000076 Printed in U.S.A. Rev. 2/99 Thus specifications may change without notice. Illustrations may
©1999 Cummins Engine Company, Inc. include optional equipment.