DWF 800

Service Manual
Auto Washer
Model : DWF-750/752/800/802
753/755/803/805
756/758/806/808
✔ Caution
: In this Manual, some parts can be changed for improving, their
performance without notice in the parts list. So, if you need the
latest parts information,please refer to PPL(Parts Price List) in
Service Information Center (http://svc.dwe.co.kr).
DAEWOO ELECTRONICS CO., LTD.

ASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH
TO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AU
Contents
1. SPECIFICATIONS................................................................................................................... 2
WASHING MACHINE
2. STRUCTURE OF THE WASHING MACHINE ....................................................................... 3

3. FUNCTIONS OF THE CONTROL PANEL ............................................................................. 4
4. DIRECTIONS FOR INSTALLATION AND USE
LOCATION OF WASHER ............................................................................................................... 6
DRAIN SYSTEM.............................................................................................................................. 6
HOW TO CONNECT THE INLET HOSE........................................................................................ 7
HOW TO CLEAN THE FILTER ....................................................................................................... 8
5. FEATURE AND TECHNICAL EXPLANATION
FEATURE OF THE WASHING MACHINE ..................................................................................... 9
WATER CURRENT TO ADJUST THE UNBALANCED LOAD ...................................................... 9
AUTOMATIC WATER SUPPLY SYSTEM ..................................................................................... 9
AUTOMATIC DRAINING TIME ADJUSTMENT ........................................................................... 10
SOFTENER DISPENSER ............................................................................................................. 11
AUTOMATIC UNBALANCE ADJUSTMENT ................................................................................ 12
CIRCULATING-WATER ................................................................................................................ 12
LINT FILTER.................................................................................................................................. 13
RESIDUAL TIME DISPLAY........................................................................................................... 13
DRAIN MOTOR ............................................................................................................................. 13
GEAR MECHANISM ASS’Y ......................................................................................................... 14
PRINCIPLE OF BUBBLE GENERATOR ...................................................................................... 14
FUNCTIONAL PRINCIPLE OF BUBBLE WASHING MACHINE ................................................. 15
6. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT
GEAR MECHANISM ASS’Y REPLACEMENT............................................................................. 16
MOTOR SYNCHRONOUS AND VALVE REPLACEMENT.......................................................... 18
BRAKE ADJUSTMENT................................................................................................................. 18
7. THE REPAIR METHOD OF GEAR MECHANISM FOR CLUTCH SPRING PROBLEM
THE STRUCTURE OF GEAR MECHANISM............................................................................... 19
HOW TO CHECK THE CLUTCH SPRING PROBLEM................................................................ 20
THE PROCESS OF DISASSEMBLE............................................................................................ 21
THE PROCESS OF ASSEMBLE.................................................................................................. 23
8. TROUBLE SHOOTING GUIDE
CONCERNING WATER SUPPLY..................................................................................................25
CONCERNING WASHING ........................................................................................................... 26
CONCERNING DRAINING........................................................................................................... 27
CONCERNING SPINNING ........................................................................................................... 28
CONCERNING OPERATION ....................................................................................................... 29
9. PRESENTATION OF THE P.C.B ASS’Y .............................................................................. 30
APPENDIX
WIRING DIAGRAM ....................................................................................................................... 31
PARTS DIAGRAM & PARTS LIST................................................................................................ 35
CIRCUIT DIAGRAM ...................................................................................................................... 44
1. SPECIFICATIONS
NO. ITEM DWF-750/753/756 DWF-752/755/758 DWF-800/803/806 DWF-802/805/808
1 POWER SOURCE AVAILABLE IN ALL LOCAL AC VOLTAGE
POWER 50Hz 320W

2
CONSUMPTION 60Hz 300W(110~127V) / 340W(220V)
MACHINE NET 28kg/28.5kg(pump) 28.5kg/29kg(pump)

3
WEIGHT GROSS 31.5kg/32kg(pump) 32kg/32.5kg(pump)
4 DIMENSION (WXHXD) 525X858X535 525X948X535 525X858X535 525X948X535
5 MATERIAL OF INTERNAL TUB PLASTIC STAINLESS STEEL
6 WATER LEVEL SELECTOR HIGH(55l), MID(45l), LOW(31l)
7 OPERATING WATER PRESSURE 0.3kgf/cm2~8kgf/cm2 (2.94 N/cm2~78.4N/cm2)
8 MAXIMUM MASS OF TEXTILE 5.5kg 6.0kg
WASH 125~145(50Hz), 130~150(60Hz)

REVOLUTION
9 SPIN 710~725(50Hz), 760~785(60Hz)
PER MINUTE
SUIT 50(50Hz), 60(60Hz)
10 WATER CONSUMPTION APPROX. 130l/CYCLE
11 WATER LEVEL CONTROL ELECTRONICAL SENSOR
12 ANTI NOISE PLATE OPTION
13 GEAR MECHANISM ASS’Y SPUR GEAR
14 LINT FILTER O
15 SOFTENER INLET O
16 ALARM SIGNAL O
17 AUTO. WATER SUPPLY O
18 FUNCTION FOR BUBBLE OPTION
19 AUTO RE-FEED WATER O
20 AUTO POWER OFF O
2 SPECIFICATIONS
2. STRUCTURE OF THE WASHING MACHINE
The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.
NOTE
• The drawing in this book may vary from your washer model. They are designed to show the different fea-
tures of all models covered by this book, Your model may not include all features.
• Page references are included next to same features.
Refer to those pages for more information about the features.
• HOT WATER TAP

After using the washer, close the water tap. • COLD WATER TAP
In case of the single valve model, After using the washer,
there is no hot water valve. close the water tap
• SOFTENER INLET
• DETERGENT CASE
• BLEACH INLET
• CONTROL PANEL • LINT FILTER
• POWER SWITCH • GROUND WIRE

In case of 3-wire
power cord, ground
wire will not be
provided
• POWER CORD
• PULSATOR
• DRAIN HOSE
• ADJUSTABLE LEG
Accessories
DRYTEN(OPTION) HOSE ADAPTER UNDER COVER(OPTION) HOSE CONNECTOR(OPTION)

U
P
In case of screw shaped inlet hoses

water tap adapters will not be provided.
DRAIN HOSE INLET HOSE(OPTION) CONNECTOR INLET(OPTION)
NON PUMP MODEL PUMP MODEL
STRUCTURE 3
3. FUNCTIONS OF THE CONTROL PANEL
Control panel has micom sensor.
As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up.
1. DWF-750/752/800/802
HOURS
RES. CONTROL PROGRAM
2. DWF-753/755/803/805
• Press this switch to turn the power on or off.
• It can be used to choose water temperature to be supplied.

• As the button is pressed, water temperature will be repeated.
COLD → COLD+HOT → HOT
• In case of the single valve model, there is no wash temperature selector function.
• It can be used to adjust amount of water according to the size of the load to be washed.
• As the button is pressed, water level is selected by MID → HIGH → LOW
RES.
• It can be used to pre-engage time for wash.
• It is the button for the partial process or the combination of each process (wash, rinse,
spin)
CONTROL
• If you want to change wash time, rinse times, spin time, you must press this button after
selecting each process by the process button. Also, this button can be used to spin only.
• It can be used to select the full-automatic program.

PROGRAM • As the button is pressed, program will be selected by following order :
FUZZY → FUZZY+SOAK → HEAVY → HEAVY+SOAK → SPEEDY → SUIT(WOOL)
• Operation and temporary stop is repeated as it is pressed.

• When you want to change program in operating;
press the “START/HOLD” button → Select the program that you want to change → press
the “START/HOLD” button again.
4 CONTROL PANEL
3. DWF-756/758/806/808
• Press this switch to turn the power on or off.
• It can be used to choose water temperature to be supplied.

• As the button is pressed, water temperature will be repeated.
COLD → COLD+HOT → HOT
• In case of the single valve model, there is no wash temperature selector function.
• It can be used to adjust amount of water according to the size of the load to be washed.
• As the button is pressed, water level is selected by MID → HIGH → LOW
• It can be used to cancel the full-automatic program.

• When the button is pressed, the display will light down.
If you want to wash, rinse or spin, you can press one of the buttons.
• It can be used to pre-engage time for wash.
• It can be used to select the full-automatic program.

• As the button is pressed, program will be selected by following order :
FUZZY → HEAVY → SUIT(WOOL) → BLANKET → SPEEDY
• It can be used to adjust washing time.

• As the button is pressed, it will repeat.
6 MIN → 9 → 12 → 15 → 18 → SOAK
• It can be used to adjust rinse times.

• As the button is pressed, it will repeat.
• 1 TIME → 2 → 3 → 4 → 5
• It can be used to adjust spin time.

• As the button is pressed, it will repeat. 1MIN → 3 → 5 → 7 → 9
• Operation and temporary stop is repeated as they are pressed.

• When you want to change program in operating;
press the “START/HOLD” button → Select the program that you
want to change → press the “START/HOLD” button again.
PROCEDURE 5
4. DIRECTIONS FOR INSTALLATION AND USE
§ è Location Of Washer
Check location where washer will be installed. Make sure you have everything necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0˚C(32˚F) to avoid any damage from freezing.
• Install the washer on the horizontal sold foor.
C
If the washer is installed on an unsuitable floor, it could make consider-
able noise, vibrate and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for horizontal set-
ting.
B • Earthed electrical outlet(B) is required with 20cm of bottom back of

washer cabinet.
• Hot and cold water faucets (C) must be within 1M of the upper back of
the washer cabinet and provide water pressure 0.3kgf/cm 2-
A
UP DOWN 8kgf/cm2(2.94N/cm2-78.4N/cm2).
§ è Drain System
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose.
• Conect the drain hose to the drain outlet at the back side of the washer.
Non-Pump Model Pump Model
Drain Outlet
Drain hose
Drain hose
NOTES
The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
Non-Pump Model
1 In case that it goes over a door sill. 2 In case of extending the drain hose. 3 Be careful that the end of the drain
Don’t let the height of the drain Don’t let the total length exceed 3m. hose is not immersed in water.
hose exceed 20cm from the bottom
of washer. 3m
20Cm
Pump Model
Laundry tub drain system Standpipe drain system
• Top of tub must be at • Needs a 3cm minimum diameter standpipe with minimum
least 86cm (34inches) carry away capacity of 30liters per minute.
high and no higher than • Top of tub must be at
130cm from bottom of least 86cm(34inches)
washer (A) A high and no higher than B
130cm from bottom of
washer (B)
6 DIRECTIONS
§ è How to Connect the Inlet Hose
Be careful not to mistake in supplying between the hot(maximum : 50˚C) and cold water.
In using only one water tap or in case of attached one water inlet valve, connect the inlet hose to the cold water inlet
valve.
Do not over tighten : this could cause damage to couplings.
FOR ORDINARY TAP
1 Pull down the collar

of the inlet hose to
separate it from the
2 Loosen the four
screws at the water
tap adapter, but don’t
3 Connect the water tap
adapter to the water tap and
tighten the four screws evenly
water tap adapter. loosen the screws until while pushing up the adapter
they are separated from so that the rubber packing
the water tap adapter. can stick to the water tap
tightly.
¡ collar
TAPE
4 Remove the tape,

and screw connector
B into connect A tightly.
5 Connect the inlet
hose to the water tap
adapter by pulling down
6 Connect the inlet hose adapter
of the hose to the water inlet of
the washer by turning it clock-
the collar of the hose end. wise to be fixed tightly.
Connector A
Connector B
• Please check the rubber packing
inside the inlet hose adapter of
the hose.
FOR SCREW-SHAPED TAP
1 Connect the inlet

hose to the water tap
by screwing the con-
2 Connect the connec-
tor-inlet supplied if
necessary.
3 Insert the inlet hose adapter
into the water inlet of washer
and turn it to be fixed.
nector D tightly.
Connector
Inlet
Rubber
Connector D Packing Rubber
Connector D Packing
Inlet Hose Connector C Hose

Connector C • Assert the packing in the inlet
CONNECTION 7
§ è How To Clean The Filter
CLEANING THE LINT FILTER
1 Pull the Filter frame

upward. 2 Turn the lint filter
inside out, wash the
lint off with water.
3 Return the filter as it was, and
insert the filter frame into the
slot.
Lint Filter Filter Frame
CLEANING THE WATER INLET FILTER

• Clean the filter when water leaks from the water inlet.
1 Pull the
power plug
out before
2 Turn off the
water supply
to the washer
3 Pull the
inlet filter out. 4 Remove the dirt
from the inlet filter
with a brush.
cleaning it. and separate
the inlet hose.
CLEANING THE DRAIN FILTER

• In case of “U” shaped drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ..
• If the drain filter is not cleaned at proper time (every 10 times of use), drain problem could be caused.
1 Put down the

remained water in the
hose. And put a container
2 Turn the cap counter-
clockwise. 3 Pull out the filter assembly off
the case of the main body.
SLIT
under the filter to collect FILTER
water. CASE
CAP
CAP
CONTAINER
FILTER
4 Clean the drain filter

removing the foreign
stuffs.
5 Put in the filter along the
guiding prominence of the
case. Please note the left
6 Turn the cap clockwise tightly.
FILTER position of the filter adjusting

the groove to the guide rib.
CAP CASE
FILTER
GUIDE CAP
RIB
CAP
SLIT
8 CONVENIENCE
5. FEATURE AND TECHNICAL EXPLANATION
Feature of the Washing Machine

1 The first air bubble washing system in the world.
2 Quiet washing through the innovational low-noise design.
3 The wash effectiveness is much more enhanced because of the air bubble washing system.
4 The laundry detergent dissolves well in water because of the air bubble washing system.
5 The adoption of the water currents to adjust the unbalanced load.
6 One-touch operation system.
Water Current to Adjust the Unbalanced Load

It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 35
seconds.(But, the SUIT course have no operation of the water currents to adjust the unbalnced load.)
EFFECT
It reduces vibration and noise effectively while spinning.
WATER FLOW
WASH DRAIN SPIN FILL RINSE 1 DRAIN SPIN FILL RINSE 2 DRAIN •••
MOTOR C.W
SINGAL C.C.W
TIME(SEC.) 0.4 0.4 0.4 0.4 0.4 0.4 •••••••
40 SEC. (About 25 Times)

* When the water level is “HIGH”
Automatic Water Supply System

The water level would be lowered because the clothes absorbs water at the beginning of washing. Therefore, after
60 seconds, the operation is interrupted to check the water level, and then the water is supplied again until the select-
ed water level is reached.
EXPLANATION 9
Automatic Drainning time Adjustment
This system adjusts the draining time automatically according to the draining condition.
Good draining The washer begins spin process after drainage.

Draining
Bad draining Draininig time is prolonged.
condition
No draining Program is stopped and gives the alarm.
FUNCTIONAL PRINCIPLE
1 The micom can remember the time from the begining of drain to reset point when the pressure switch reaches to
“OFF” point
Drain Time Movement of the Program
Less than
Continue draining
10 minutes
More than
Program stops and gives the alarm with blinked on display lamp.
10 minutes
2 In case of continuous draining, residual drain time is determined by micom.

Draining time as a whole = D + 40
Residual drain time.
The time remembered by micom.
10 EXPLANATION
Softener Dispenser
This is the device to dispense the softener automatically by centrifugal force.
This is installed inside the auto-balancer.
1 Softener stays in room (A) when poured into softener inlet.
2 Softener moves from (A) to (B) by centrifugal force during intermittent spin process.
3 Softener flows from (B) to (C) during rinse process next to intermittent spin.
4 Softener moves from (C) to (D) by centrigfugal force during second intermittent spin.
After spin process is finished, the softener is added into the tub through softener outlet.
FLOW OF THE SOFTENER
Wash Intermittent Hold Intermittent Rinse Spin

Spin Spin
Normal Centrifugal Flow in Centrifugal Flow in

force force
Program (A) (B) (C) (D)
FLOW OF THE SOFTENER INSIDE OF THE BALANCER

Room inside
the balancer A B C D
Centrifugal force
Flowing by weight
NOTES Softener moves into the next room when r.p.m of the tub is more than 100 r.p.m.
HOW TO CHECK MOVEMENT

Pour a reasonable amount of “MILK” into softener dis-
penser and operate the washer with no load. In final
rinse cycle, make sure that the milk is added into the
tub through softener outlet.
Balancer
Softener
outlet
B D
A C
Softener inlet
EXPLANATION 11
Automatic Unbalance Adjustment
This system is to prevent abnormal vibration during intermittent spin and spin process.
1 When the lid is closed, the safety switch contact is “ON” position.
2 In case that wash loads get uneven during spin, the outer tub hits the safety switch due to the serious vibration,
and the spin process is interrupted.
3 In case that P.C.B. ASS’Y gets “OFF” signal from the safety switch, spin process are stopped and rinse process is
started automatically by P.C.B. ASS’Y.
4 If the safety switch is operated due to the unbalance of the tub, the program is stopped and the alarm is given.
NOTES
The alarm finished when you close the lid after opening it. Check the unbalance of the wash load and the
installation condition.
Circulating-Water
CIRCULATING-WATER
The washing and rinsing effects have been Filter
improved by adopting the water system in Tub
which water in the tub is circulated in a
designed pattern.
When the pulsator rotates during the washing Water Outer tub
channel
or rinsing process, the water below the pul-
sator vanes creates a water currents as shown Pulsator
in figure.
The water is then discharged from the upper
part of the tub through the water channel.
About 40 L/min. water is circulated at the ‘high’
water level, standard wash load and standard
water currents.
12 EXPLANATION
Lint Filter
Much lint may be obtained according to the kind of
clothes to be washed and some of the lint may also
sticks to the clothes.
To minimize this possibility a lint filter is provided on Filter
Filter
the upper part of the tub to filter the wash water as it Bleach
Bleach Inlet
is discharged from the water channel. It is good to Inlet
use the lint filter during washing. Pulsator
Pulsator
HOW TO REPLACE LINT FILTER

1 Pull the filter frame upward.
2 Turn the lint filter inside out, and wash the lint off with water.
3 Return the filter as it was, and fix the filter frame to the slot.
Residual Time Display

When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be
counted down according to process.
When operation is finished, the TIME INDICATOR will light up .
Drain Motor
STRUCTURE
Pull
Loosen
Pulley
Lever
Inductive ring
Magnet
Coil of motor
Magnet of motor
1 When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and
revolves the pulley by gear assembly for reducing.
2 When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4 The wire pulls the brake lever of Gear Mechanism Ass’y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.
EXPLANATION 13
Gear Mechanism Ass’y
The proper water currents is made by the rotation of pulsator at a low speed to prevent the damage to the small
sized clothes.
Pulsator shaft
Spin shaft
One way clutch

bearing Gear unit as
Planetary gear Sun gear

Internal gear
Brake lever Clutch spring
Clutch boss
Gear pulley
Pulsator Motor
1490 r.p.m
(50Hz)
Gear unit as
1 revolution
Motor Pulsator
Gear Unit as
Gear Pulley 138 r.p.m
5 revolutions 720 r.p.m

Tub
Gear pulley Directly
720 r.p.m
V-belt
Principle of Bubble Generator

STRUCTURE
Bobbin & coil

Armature
Magnet Bellows
Trans core
Air out hole

Air
Air
Protector A
Air in hole
Protector B
14 EXPLANATION
PRINCIPLE OF INTAKE & OUTLET OF THE AIR
INTAKE : ARMATURE moves up, and BELLOWS inhales the air. At the same time, protector B is open and A is
close.
OUTLET : ARMATURE moves down, and BELLOWS exhausts the air. At the same time, protector B is close and A
is opend.
FUNCTIONAL PRINCIPLE OF TRANS & MAGNET

¡ The phase of A.C electric power changes to 60 cycle/second.
¡ The magnetic pole of trans core is changed by the change of the phase of A.C electric power.
¡ The core repeats push and pull (3600 times/min.) of the armature magnet.
A.C A.C
N LEAF SPRING S
TRANS CORE
NS NS
S N
MAGNET
Functional Principle of Bubble Washing Machine
ACROSS SECTION
Air bubble
Tub
Outer tub
Pulsator
Bubble generator supplies the air from the bottom of outer tub to the inner space of pulsator, the air is dispersed by
the rotation of pulsator. Air-bubble is created by the centrifugal force, and rises up.
EXPLANATION 15
6. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT
Warning
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE WASHING MACHINE, DISCON-
NECT THE POWER CORD FROM THE ELECTRIC OUTLET.
Gear Mechanism Ass’y Replacement
¡ Raise the top plate on the outer cabinet. ¡ Loosen the pulsator mounting screw and remove
¡ Remove outer tub cover from the tub ass’y. the pulsator.
¡ Remove the spinner shaft flange nut by using ‘T’ ¡ Remove the tub ass’y.
type box wrench.
NOTES
To assemble the gear mechanism ass’y, reverse

the disassembly procedure.
16 DIRECTIONS
¡ Lay the front of the washer on the floor. ¡ Remove four bolts mounting the gear mechanism
¡ Remove four bolts mounting the plate-gear protect by ass’y by using a box wrench.
using a box wrench and remove plate-gear protect.
¡ Remove the V-belt.
¡ Pull out the gear mechanism assy.
DIRECTIONS 17
Motor Synchronous And Valve Replacement(Non Pump Model)
¡ Lay the front of the floor. ¡ Take out the wire of motor synchonous from the
¡ Loosen two special screw and motor synchronous. bracket.
¡ Separate the motor sycnchronous from the base.
¡ Turn the valve by using screw driver as shown in ¡ Remove the valve lid from the valve drain assy.
picture.
Brake Adjustment
¡ Loosen the adjustment bolt and turn the adjust- NOTES:

ment bolt until the end of the bolt touches to the
brake lever. 1. The brake adjustment has been made at the
¡ Tighten the lock nut and apply a small amount of factory, so that it is not re-adjust.
paint-lock. However, in case of insufficient brake operation,
problem the upper procedure.
Adjustment bolt 2. Overtightening of the adjustment bolt will cause

Brake lever poor brake performance.
Clutch lever
3. Undertightening of the adjustment bolt will
cause continuous braking and thereby.
cause the problems of the motor during the
Gear mechanism ass'y spingcycle.
18 DIRECTIONS
7. THE REPAIR METHOD OF GEAR MECHANISM FOR CLUTCH SPRING PROBLEM
The Structure Of Gear Mechanism
Bearing Clutch Lever
Clutch Boss
Clutch Tip
Clutch spring
Coupling
Pulley
Spring Washer Fastening Nut
Pulley Shaft
Clutch Boss Ass’y
Pulley Shaft
Fastening Nut
Coupling Spring Washer
Drum plate
Pulley
¡ ‹TOOL FOR REPLACING THE CLUTCH BOSS ASSEMBLE¡

¡‹
Tool name Specification Q’ty
Fixing jig 1
Ratchet handle 1
Socket and extension bar socket : 10mm, 17mm per each
Some cotton yarn some
THE REPAIR 19
How To Check The Clutch Spring Problem
PROBLEM
1) THE LAUNDARY IS IN THE SPIN TUB UNEVENLY WHEN JUST STARTING SPIN PROCESS.
2) THEREFORE, IT CAUSE THE SERIOUS NOISE AND VIBRATION WHEN WASHING AND SPINNING
PROCESS OR SUPPLING WATER IRREGULARY WHEN SPINNING PROCESS
AND CAUSE SHORT OF SPIN PERFORMANCE.
CHECKING METHOD
IN THIS CASE, YOU MUST EMPTY THE SPIN TUB FIRST.
1) TO CHECK THE REVOLUTION OF SPIN TUB. IF THE SPIN TUB DOES NOT REVOLVE AND ONLY
THE PULSATOR IS TURNING, THAT IS CLUTCH SPRING DEFECT.
2) TO CHECK THE SPIN SPEED(RPM) BETWEEN SPIN TUB AND PULSATOR.
IF YOU FIND THE DIFFERENT SPIN SPEED BETWEEN SPIN TUB AND PUSATOR, THIS IS ALSO
CLUTCH SPRING DEFECT.
IN THIS CASE, WE ARE GOING TO SUPPLY THE CLUTCH BOSS ASSEMBLY INSTEAD OF GEAR
MECHANISM ASSEMBLEY. PLEASE REFER TO FOLLOWING FIG.
THE CLUTCH BOSS ASSEMBLY
NO. PARTS NAME SPECIFICATION CODE Q’TY

1 CLUTCH SPRING 1.5*1.5 3615110000 1
2 CLUTCH BOSS PP 3619301300 1
3 GREASE beacon#325 3g
PACKING PACKING THE CLUTCH BOSS ASS’Y 1
METHOD BY USING VINYL PACK
CLUTCH BOSS ASS’Y PART CORD : 3610028000
20 THE REPAIR
The Process Of Disassemble
Disassemble 1
No. Process Notice
Use wrench or driver

- ratchet handle
- extension bar
- socket : 10mm
1 Remove the protector
Release screws marked 4-point
2 Remove the v-belt
Use fixing jig for pulley as to

see fig 1.
and 17mm-socket for nut
3 Loosen the fastening nut
Take out plain washer if it has
4 Disassemble the spring washer
THE REPAIR 21
Disassemble 2
No. Process Notice
5 Disassemble the pulley
Catch the boss and pull

upward with spiral rotate in the
clockwise direction
Disassemble the clutch boss

6 assembly
Separate coupling from clutch

7 boss ass’y
Clean the drum plate, coupling

surface and contact face
between drum plate and cou-
pling
It is necessary to keep cotton

8 Cleaning piece goods being dry and
clean
22 THE REPAIR
The Process Of Assemble
Assemble 1
No. Process Notice
Check the uneven face of cou-

pling is assembled upward
1 Assemble the coupling
- Push in the clutch boss ass’y

with rotating on the clockwise
direction.
- After assembling, rotate on the
clockwise more 2~3 teeth and
pull out the pulley shaft upward
2 Assemble the new clutch boss
ass’y
3 Assemble the pulley
If there was plain washer, you

have to assemble plain washer
the first and then assemble
spring washer
4 Assemble the spring washer
THE REPAIR 23
Assemble 2
No. Process Notice
- Use fixing jig and 17mm

socket wrench
as if disassembling,
as fastening torque about
Assemble the fastening nut 100~200kgf-cm.
- Check the end-play, up and
downward and check the bind-
5
ing force, too much or not on
bi-direct of rotation.
6 Assemble the Belt
7
Assemble the protector
Finally, check the distance

keep distance 2~3mm between brake lever and con-
Synchronous Drain trol bolt. (2~3mm)
Motor Valve Also, check the interferance
depth both clutch tip and clutch
8 boss(3.5~4.5mm)
Final checking
Clutch Tip
3.5~4.5
24 THE REPAIR
8. TROUBLE SHOOTING GUIDE
NOTES
1. When replace the P.C.B. ASS’Y do not scratch the surface of the P.C.B. ASS’Y.
2. Disconnect the power cord from the electric outlet.
Concerning Water Supply
PROBLEM CHECK POINT CAUSE SOLUTION
Do you open the water NO Open the water tap.

tap?
YES
YES
Is the filter of the water
Clean the filter.
inlet valve clogged with
dirt?
NO
Is the water pressure NO Increase the water pres-

sufficient? sure.
(0.3~8 kgf/cm2)
NOTE : Open the water tap fully and measure
the flow rate.
Flow
rate(l/min.) 11.5 15.0 18.0 20.3 24.1 27.4
Water pressure
WATER IS YES (kgf/cm2) 0.3 0.4 0.5 0.6 0.8 1.0
NOT SUP- From the upper results, you know that the flow rate more than
PLIED. 11.5l/min. is essential for water supply.
NO Water inlet valve

Does the water inlet Change water inlet valve.
valve make operating is defective.
sound?
YES
Is the connector or the NO Improper connection of

Connect the connector or
terminal connected the connector or the ter-
the terminal properly.
properly? minal.
YES
NO
Is the output voltage of P.C.B AS is defective. Change the P.C.B AS.
the P.C.B normal?
YES
Lead wire is defective. Change the lead wires.
TROUBLE SHOOTING 25
Does the water supply YES The water inlet valve is Change the water inlet
continue while the power defective. valve.
is turned off?
NO
Does the water supply start YES The triac of P.C.B is
as soon as you press the Change the P.C.B ASS’Y.
defective.
power switch?
NO
Operate the washer after
WATER SUP-
setting the water level to
PLY IS NOT “HIGH”
STOPPED.
NO
Does the water supply Normal operation.
continue after the water
reaches to the “HIGH”
level?
YES
YES
Is the air tube of water Air tube is defective. Change the air tube.
level switch kinked or
deformed? Pressure switch is defec- Change the pressure
NO
tive. switch.
Concerning Washing
Does the motor operate after fin-

ishing water supply?
NO YES
Does pulsator rotate in YES The triac of P.C.B is Change the P.C.B
only one direction? defective. ASS’Y.
NO Normal
THE PUL- Does the motor make
SATOR DOES operating sound?
NOT ROTATE YES NO
EVEN IF THE
Is the motor coil dis- YES
WATER IS Motor is defective. Change the motor.
connected?
SUPPLED.
Is the connection condi- NO

Improper connection Connect the terminal
tion of capacitor termi- properly.
nal good?
YES
YES
Change the V-belt.
Is the V-belt worn out? V-belt is defective.
NO Change the motor.
26 TROUBLE SHOOTING
Concerning Draining
NO
Do you install the Install the drain hose
Improper installation
drain hose properly? properly.
YES
Is the foreign matter YES Remove the foreign mat-

Malfunction of drainage
accumulated inside ter from the pump hous-
THE WASHER by the foreign matter
the pump housing? ing
DOES NOT
DRAIN. NO
Is the output voltage of YES

Drain pump is defective Change the Drain pump
the drain pump normal?
NO
P.C.B ASS’Y is defective. Change the P.C.B ASS’Y.
TROUBLE SHOOTING 27
Concerning Spinning
YES
Is the lid open? Close the lid.
NO
Does the safety switch NO Safety switch is defec- Change the safety
operate normally? tive. switch.
YES
Is the connector of NO Improper connection of Connect the connector

P.C.B ASS‘Y connected the connector. properly.
properly?
YES P.C.B. ASS’Y is defec- Change P.C.B ASS’Y.

tive.
Does the pulsator rotate
while the tub does not
rotate?
NO YES
THE WASHER
DOES NOT YES
Is the input
Drain motor is defective. Change the drain motor.
SPIN. voltage of the drain
motor normal?
NO
YES
Is the V-belt worn out? V-belt is defective. Change the V-belt.
NO
Is the input voltage of YES
Motor is defective. Change the motor.
motor normal?
NO
NO Connect the terminal cor-
Is the connection condi- Improper connection.
tion of capacitor termi- rectly.
nal good?
YES
28 TROUBLE SHOOTING
Concerning Operation
NO
Is the plug connect-ed
Connect the plug.
to electric outlet?
YES
YES
THE INDICA- Is Fuse opended? Change Fuse
TOR NO
LAMPS(L.E.D)
NO
DO NOT LIGHT Is the condition of Change P.C.B ASS’Y.
Power button is defective
power button good?
UP WHEN THE
POWER BUT- YES
TON IS NO
Is the connector of the Improper connection of Connect the connector
PRESSED.
P.C.B. ASS’Y connect- the connector. properly.
ed properly?
YES
P.C.B. ASS’Y is defec- Change P.C.B ASS’Y.
tive.
Do you press NO Press START/HOLD but-

PROGRESS START/HOLD button? ton.
LAMPS(LED)
DO NOT LIGHT
UP. YES
P.C.B ASS’Y is defective. Replace P.C.B ASS’Y.
MOTOR Does the pressure switch NO Pressure switch is defec- Change the pressure
ROTATES operate normally? tive. switch.
WHEN
START/HOLD YES Abnormal
BUTTON IS
Check the output voltage Change P.C.B ASS’Y.
NOT P.C.B ASS’Y is defective
of P.C.B ASS’Y
PRESSED.
YES There is foreign matter Remove the foreign mat-

Is the strange noise gen-
between pulsator and ter.
erated when the pulsator
ABNORMAL rotates in TEST MODE tub.
NOISE DUR- of P.C.B ASS’Y?
ING WASH
PROCESS. NO
YES
Is the V-belt worn out? V-belt is defective. Change the V-belt.
TROUBLE SHOOTING 29
9. PRESENTATION OF THE P.C.B ASS’Y
Concerning Error Message
MESSAGE CAUSE SOLUTION
Improper installation of drain hose. Install drain hose properly.
The drain hose is blocked up by foreign Remove foreign matter from drain hose.
matter.
Drain motor is inferior. Change drain motor.
The water tap is closed. Open the water tap.
The water inlet filter clogged. Clean the water inlet filter.
It passes over the 30 minutes, yet it doesn’t Check whether or not is comes to the
come to assigned water level. assigned water level.
Wash loads get uneven during spin. Re-set wash loads evenly.
Poor installation of the unit. Proper installation.
The lid is opened. Close the lid.
The safety switch is inferior. Change the safety switch.
The load sensing is inferior. After the load

sensing operates about 7 seconds, the
message is displayed during 1 second and Change the P.C.B. ASS’Y.
water level is always fixed ‘high’.
The water level sensing is inferior. Check the water level sensor and the
contact part of the connector.
30 PCB ASS’Y
APPENDIX
§ è Wiring Diagram [non-pump]
WIRING DIAGRAM 31
§ è [Non-Pump, Single Valve]
32 WIRING DIAGRAM
§ è [Pump]
WIRING DIAGRAM 33
§ è [pump, single valve]
34 WIRING DIAGRAM
§ è Parts Diagram
PARTS DIAGRAM 35
✔ Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)
è Parts List
§§
NO. PART NAME PART CODE SPECIFICATION REMARK
A01 PLATE T 3614521500 PP
A02 DOOR B AS 3611797600 ABS OPTION :
A03 DOOR F AS 3611797700 ABS TRANSPARENT
A04 DOOR B 3611797300 PP OPTION :
A05 DOOR F 3611797400 PP NOT TRANSPARENT
A06 SPRING PLATE LEVER 3615111800 SUS
A07 PLATE LEVER 3614521400 PP
A08 SPRING DOOR 3615112100 SUS D1.4
A09 PANEL B 3614233400 PP
A10 CAP WATER - PP
OPTION :
A11 CAP DRY - PP
UPWARD WATER VALVE
A12 CONNECTOR HOSE 3619506600 PS
A13 PACKING 3614004100 SILICON
A14 PANEL B 3614233600 PP OPTION : BACKWARD
3614233500 ABS DWF-750/752/800/802
A15 PANEL F 3614235610 ABS DWF-753/755/803/805
3614235600 ABS DWF-756/758/806/808
A16 CAP REAR 3610902600 CR
A17 NOZZLE DETERGENT 3618102600 PP
A18 CASE DETERGENT 3611130700 PP
A19 LEVER SAFETY S/W 3613701800 POM
A20 SPRING LEVER SAFETY 3615111700 SUS D1.0
A21 CLAMP 4507D08150 MFZN HOSE ID=7PIE
A22 SENSOR PRESSURE AS 3614801300 CDN-D6N
A23 SWITCH COVER AS 4507K44031 15A 220VAC 1006FD
3615403510 AC 110-130V/50,60Hz COLD
3615402010 AC 220V/60Hz COLD BACKWARD
A24 VALVE INLET 3615403711 AC 220-240V/50Hz COLD
3615403530 AC 110-130V/50,60Hz COLD
UPWARD
3615402030 AC 220V/60Hz COLD
3615403630 AC 110-130V/50,60Hz HOT
A25 VALVE INLET 3615402130 AC 220V/60Hz HOT BACKWARD
3615403831 AC 220-240V/50Hz HOT
3612787910 8A COLD NON-BUBBLE
3612787915 5A, COLD NON-BUBBLE SINGLE VALVE
3612787920 8A COLD BUBBLE DWF-750/752/800/802
3612787925 5A COLD BUBBLE
3612787950 8A COLD NON-BUBBLE
SINGLE VALVE
A26 HARNESS AS 3612787955 5A, COLD NON-BUBBLE
DWF-753/755/803/805
DWF-756/758/806/808
3612787930 8A COLD/HOT BUBBLE
3612787935 5A COLD/HOT BUBBLE DUAL VALVE, PUMP
3612787940 8A COLD/HOT NON-BUBBLE
36 PARTS DIAGRAM

3612787945 5A COLD/HOT NON-BUBBLE DUAL VALVE, PUMP
3612787970 8A COLD/HOT BUBBLE
A26 HARNESS AS 3612787975 5A COLD/HOT BUBBLE
DUAL VALVE
3611337000 F H05VV 3X0.75 1.9M WH CHILE
3611337100 RVCTFK 2X0.75 1.9M GY JAPAN
3611337200 N LFC-3R 3X0.75 1.9M GY AUSTRALIA
3611337300 F H05VV 3X0.75 1.9M WH ITALY
3611337400 RW-300/500 3X0.75 1.9M PR. CHINA
3611337500 VCTF 3X0.75 1.9M INDIA
3611337600 U VCTF 3X0.75 1.9M GY SOUTH KOREA
A27 CORD POWER AS 3611337700 P VCTF 3X0.75 1.9M WH KUWAIT
3611337800 VCTF 3X0.75 1.9M WH KUWAIT, OMAN
3611337900 H05VV-F 3X0.75 1.9M WH MALAYSIA
3611338000 H05VV-F 3X0.75 1.9M SINGAPORE
3611338100 A-VCTFK 2X0.75 1.9M GY TAIWAN
3611338200 F H05VV 3X0.75 1.9M BK EUROPEAN NATIONS
3611338300 C SJT 3X18AWG 1.9M GY PANAMA, USA
3611338400 H05VV-F 3X0.75 1.9M GY ARGENTINA
3611338500 H05VV-F 3X0.75 1.9M GY SOUTH AFRICA
3611338600 P VCTF 3X0.75 1.9M WH OMAN
3618946301 AC220-240V L=750 PAD
A28 UNIT BUBBLE AS OPTION
3618906401 AC110-130V L=750 PAD
3618911600 8.4µF 400VAC CAN-TYPE AC220-230V/50,60Hz
3618911900 30µF 200VAC CAN-TYPE AC120-127V/60Hz
A29 UNIT CAPACITOR
3618912000 33.6µF 200VAC CAN-TYPE AC110V/60Hz
3618959700 7.5µF 400VAC CAN-TYPE AC240V/50Hz
PRPSSWU602 802WT(T8-V1F)
PRPSSWU603 752MN(T8-V2)
PRPSSWU701 750WTP(T8-V1)
DWF-750/752/800/802
PRPSSWU702 800WMP(T8-V2)
PRPSSWU704 750MNP(T8-V2F)
PRPSSWU703 800WMP(T8-V2F, AUSTRAL IA)
A30 PCB AS
PRPSSWU900 803MNP(T8-V2F)
PRPSSWU901 803MTC(T8-V1F)
PRPSSWU902 803MTP(T8-V1)
DWF-753/755/803/805
PRPSSWU903 803MNP(T8-V2)
PRPSSWU905 803MNP(T8-V2, AUSTRALIA)
PRPSSWU801 806MTC(T10-V1)
DWF-756/758/806/808
PRPSSWU802 806MNC(T10-V2)
PRPSSWU803 806MTP(T10-V1)
3618961000 FILTER + COIL
A31 UNIT FILTER AS OPTION
3618961010 FILTER + COIL, THERMAL TUBE
PARTS DIAGRAM 37
38 PARTS DIAGRAM
è Parts List
§§
B01 CABINET 3610809600 PAINTED STEEL SHEET 0.6T
B02 HANDLE CABINET 3612603300 PP
B03 PLATE UPPER 3614521600 PP
3610389100 PP LOW H=45 DWF-750/753/756/800/803/806
B04 BASE U
3610389200 PP HIGH H=135 DWF-752/755/758/802/805/808
B05 LEG ADJUST AS 3617702100 DWF-1089W2
B06 LEG FIX 3612100310 SBR
B07 HOLDER SUPPORT F 3613044600 FRPP FRONT
B08 HOLDER SUPPORT B 3613044500 FRPP REAR
B09 COVER BACK 3611413600 SPG 0.4T
B10 COVER UNDER 3611418500 PP OPTION
B11 HARNESS OUTER 3610068700 50/0.18GREEN ST710489-2 2-WIRE POWER CORD
B12 HOSE DRAIN O AS 3613213500 LDPE L=950 NON-PUMP
B13 HOSE DRAIN O AS 3613218800 LDPE/EVA L=1600 PUMP
PUMP
B14 GUIDE DRAIN HOSE 3612502300 PP
3611901530 DWF-800WNP E-TYPE ASKOLL PUMP
B15 FILTER AS
3611904900 DWF-5590DPNE E-TYPE DMI PUMP
3611419100 VO ASKOLL 220-240V/50Hz
B16 COVER PUMP ASKOLL PUMP
3611419200 HB 110V, 220V/60Hz
B17 COVER PUMP 3611405320 PP DMI PUMP
3618958900 AC 220-240V/50Hz
UNIT DRAIN PUMP 3618959000 AC 220V/60Hz ASKOLL PUMP
3618959100 AC 110-127V/60Hz
3618957230 AC 220V/50Hz, L=1350, VSF
B18
3618957200 AC 230~240V/50Hz, L=1350, VSF
UNIT DRAW PUMP 3618957260 AC 220V/60Hz, L=1350 DMI PUMP
3618957300 AC 110~127V/60Hz, L=1350, VSF
3918957330 AC 110~127V/60Hz, DIW, L=1350
PARTS DIAGRAM 39
40 PARTS DIAGRAM
è Parts List
§§
C01 BALANCER AS 3616104700 DWF-6010
C02 TUB I 3618808500 SUS 0.5T
C03 TUB U 3618808601 PP
STAINLESS STEEL
C04 GUIDE FILTER 3612507000 DWF-6010NP
C05 SPECIAL SCREW 3616003700 SUS 5.5X16
C06 PULSATOR AS 3719706700 DWF-800WNP
C07 BALANCER AS 3616104500 DWF-5510PN
C08 TUB I 3618808100 PP
PLASTIC
C09 GUIDE FILTER 3612503900 PP
C10 PULSATOR AS 3619706600 DWF-750WTP
C11 FILTER AS 4505E82002 POLYESTER 90X120 INSERT
C12 SPECIAL SCREW 3616002901 SUS 304 NON-SILOCK
C13 SPECIAL NUT 4507D83080 SUS 304
C14 FLANGE TUB 3617201100 5KG 3-FOOT
C15 SPECIAL SCREW 3616007000 SCM24H, 6.5X24
PARTS DIAGRAM 41
42 PARTS DIAGRAM
è Parts List
§§
D01 COVER TUB O 3611414600 PP
D02 TUB O 3618817600 PP
D03 SUSPENSION AS F 3619804200 FRONT
D04 SUSPENSION AS B 3619804300 REAR
D05 VALVE DRAIN AS 3615408500 DWF-750M
NON-PUMP
D06 HOSE DRAIN I AS 3613227000 LDPE+EVA DWF-752MN
D07 HOSE DRAIN I AS 3613226900 LDPE+EVA DWF-800WNP PUMP
D08 CLAMP 4507D08150 MFZN HOSE ID=7PIE
OPTION : PUMP
D09 HOSE 4500D08210 ID=4.0
D10 CLAMP 4507D08150 MFZN HOSE ID=7PIE
OPTION : BUBBLE
D11 HOSE 4500D08210 ID=4.0
D12 BASE 3610302900 SECEN 1.2T
D13 SPECIAL SCREW 3616007000 SCM24H 6.5X24
3966010410 220-240V/50,60Hz ST=23
D14 MOTOR SYNCHRONOUS
3966320830 110-127V/60Hz ST=23
D15 GEAR MECHANISM 3617307310 GM-0600-KJ4P0
D16 BOLT HEX 7640802011 6B-1 8X20 SW MFZN
D17 PROTECTOR GEAR 3618303600 SGCC 1.2T
D18 SPECIAL WASHER 4505E34030 PP
3618959900 110-127V/60Hz W1D30CC004
D19 UNIT MOTOR AS 3618960100 220V/60Hz W1D0UC004
3608960200 220-240V/50Hz 30VC004
D20 BOLT HEX 7650802511 6B-1 8X25 HS MFZN
3618401420 DP=53.0 50Hz ALDC
D21 PULLEY MOTOR AS
3618402800 DP=48.5 60Hz ALDC
OPTION
3618431900 DP=53.0 50Hz PRESS
D22 PULLEY MOTOR AS
3618432000 DP=48.5 60Hz PRESS
D23 WASHER SPRING 7401008011 SW-8 MFZN
D24 NUT HEX 7392800011 M8XP1.25 MFZN
4507D34020 M20 50Hz
D25 BELT V
4507B34020 M19.5 60Hz
D26 HARNESS EARTH INNER 3612757010 L=560
PARTS DIAGRAM 43
§ è Circuit Diagram
1. DWF-750/752/803/805/753/755/803/805
44 CIRCUIT DIAGRAM
2. DWF-756/758/806/808
45
DAEWOO ELECTRONICS CO., LTD.
686, AHYEON-DONG MAPO-GU SEOUL, KOREA
C.P.O. BOX 8003 SEOUL, KOREA
TELEX: DWELEC K28177-8
CABLE: “DAEWOOELEC”
FAX: 82-2-360-7877
TEL: 82-2-360-7114
http://www.dwe.co.kr
PRINTED DATE: JULY.2000

S/M NO. : WF750SE001

DWF 800

Uploaded by

Copyright:

Available Formats

DWF 800

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DWF 800

Uploaded by

Copyright:

Available Formats

Service Manual

DAEWOO ELECTRONICS CO., LTD.

2. STRUCTURE OF THE WASHING MACHINE ....................................................................... 3

NO. ITEM DWF-750/753/756 DWF-752/755/758 DWF-800/803/806 DWF-802/805/808

1 POWER SOURCE AVAILABLE IN ALL LOCAL AC VOLTAGE

POWER 50Hz 320W

MACHINE NET 28kg/28.5kg(pump) 28.5kg/29kg(pump)

4 DIMENSION (WXHXD) 525X858X535 525X948X535 525X858X535 525X948X535

5 MATERIAL OF INTERNAL TUB PLASTIC STAINLESS STEEL

6 WATER LEVEL SELECTOR HIGH(55l), MID(45l), LOW(31l)

7 OPERATING WATER PRESSURE 0.3kgf/cm2~8kgf/cm2 (2.94 N/cm2~78.4N/cm2)

8 MAXIMUM MASS OF TEXTILE 5.5kg 6.0kg

WASH 125~145(50Hz), 130~150(60Hz)

10 WATER CONSUMPTION APPROX. 130l/CYCLE

11 WATER LEVEL CONTROL ELECTRONICAL SENSOR

12 ANTI NOISE PLATE OPTION

13 GEAR MECHANISM ASS’Y SPUR GEAR

17 AUTO. WATER SUPPLY O

18 FUNCTION FOR BUBBLE OPTION

19 AUTO RE-FEED WATER O

20 AUTO POWER OFF O

• HOT WATER TAP

• CONTROL PANEL • LINT FILTER

• POWER SWITCH • GROUND WIRE

DRYTEN(OPTION) HOSE ADAPTER UNDER COVER(OPTION) HOSE CONNECTOR(OPTION)

In case of screw shaped inlet hoses

DRAIN HOSE INLET HOSE(OPTION) CONNECTOR INLET(OPTION)

NON PUMP MODEL PUMP MODEL

RES. CONTROL PROGRAM

• Press this switch to turn the power on or off.

• It can be used to choose water temperature to be supplied.

• It can be used to select the full-automatic program.

• Operation and temporary stop is repeated as it is pressed.

• Press this switch to turn the power on or off.

• It can be used to choose water temperature to be supplied.

• It can be used to cancel the full-automatic program.

• It can be used to pre-engage time for wash.

• It can be used to select the full-automatic program.

• It can be used to adjust washing time.

• It can be used to adjust rinse times.

• It can be used to adjust spin time.

• Operation and temporary stop is repeated as they are pressed.

B • Earthed electrical outlet(B) is required with 20cm of bottom back of

Non-Pump Model Pump Model

FOR ORDINARY TAP

1 Pull down the collar

4 Remove the tape,

FOR SCREW-SHAPED TAP

1 Connect the inlet

Inlet Hose Connector C Hose

1 Pull the Filter frame

Lint Filter Filter Frame

CLEANING THE WATER INLET FILTER

CLEANING THE DRAIN FILTER

1 Put down the

4 Clean the drain filter

FILTER position of the filter adjusting

Feature of the Washing Machine

Water Current to Adjust the Unbalanced Load