Quick Start Guide of 4G HD IP Camera

Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

Quick Start Guide

4G HD IP Camera
Quick Start Guide
V 2.3

Camera QR code

Please download CD information at www.ipcam.xin.


Please read this manual carefully before using this product and keep it
for future reference.

1 / 12
Quick Start Guide

This manual applies to our 4G series IP cameras.

The product does not contain CD, please download the correct product CD
information at www.ipcam.xin before operating the camera.

Recommend operating the IP camera according to the content below.

Content

1. About 4G camera 3
2. Install the Micro SD card and SIM card 4
3. Connect camera 4
4. View via mobile phone 5
5. View via PC 7
6. Check the SIM card 8
7. Set Micro SD card records 10
8. More info 12

2 / 12
Quick Start Guide

1. About 4G camera
1.1 Product introduction.
This is a 4G HD IP camera for monitoring. it connects to the Internet via SIM
card to send and receive data, and you can use it to remotely view real-time
images from your mobile phone, computer or other device anytime and
anywhere, it can save surveillance videos in the Micro SD card or computer, The
camera also supports alarm functions such as sending alarm emails, alarming
phone message push and other functions.

1.2 Product should contain:


①IP Camera
②Power adapter
③User manual
④WIFI Antenna
⑤Screws bag

1.2 Product interface.

Reset Button

Power

4G camera is without RJ45 interface, and it's not available for 4G.
3 / 12
Quick Start Guide

2. Install the Micro SD card and SIM card


2.1 Find SD card and SIM card installation tutorials in the CD information.

2.2 Insert the SD card and SIM card according to installation tutorials.

Note the direction


of the SIM card! SIM card

Micro SD card

Make sure the camera supports the frequency of the SIM card!
SIM card size type is Nano SIM(12.3mmx8.8mm)!
Please note the direction of SIM card installation!
Hot swapping is not supported!

3. Connect your camera


3.1 Install the antenna to camera.
4 / 12
Quick Start Guide

Make sure the 4G signal is sufficient, You


can read "6. Check SIM card" to know
how to check the 4G signal strength.

3.2 Plug in power adapter and connect to camera.

Please use the standard power supply.

4. View via mobile phone


4.1 Download “CamHi” or “CamHipro” from Google Play Store / Apple App
Store or scan the QR code below to get APP information.

Android IOS
5 / 12
Quick Start Guide

4.2 Run APP and Add Camera.

You can quickly enter the


UID by scanning the QR
code on the camera's
label, as shown below

1. click “Add
Camera”

2. input camera’s
UID

4.3 After adding the camera, click online camera to view real-time image.

click here to
monitor.

Detailed instructions for CamHI are


available in the CD information.
If the camera shows "Offline", please
read “6. Check the SIM card”.

6 / 12
Quick Start Guide

5. View via PC
5.1 Install the “HiP2P Client_Setup” from the CD information, then run
“HiP2P Client”.

You can find another installation file for MAC PC.

5.2 Enter the “Config” interface and click “Input UID” to input the camera
UID, and then add the camera.

5.3 Double click camera to view real-time image.

7 / 12
Quick Start Guide

CMS installation packages and instructions are available in the


CD information.
If the camera shows “Offline” or “Not connected”, please read
“6. Check the SIM card”.

6. Check the SIM card


6.1 You can find a hot spot beginning with "MIFI_" when the camera starts
working, use the mobile phone or PC to connect the hot spot “MIFI_****”, the
hot spot password is “1234567890”, as shown blow.

8 / 12
Quick Start Guide

mobile phone PC

6.2 Access “192.168.100.1” through the browser, the page password is


“admin”, you can check the SIM card status on this page.

4G LTE is available
and connected to
the Internet.

Camera uses
4G traffic to
transmit data

mobile phone PC
9 / 12
Quick Start Guide

6.3 If camera display is offline, please note the following:


①Damaged card or wrong installation direction when prompted " No
SIM Card or SIM Card invalid! ", as shown below 1).

1) 2)

②SIM card arrears or SIM card 4G is not available when displaying


non-4G (LTE), as shown above 2).
③The camera does not support the frequency of the SIM card when
prompted "No Service" or "Limited Service", as shown below 3).

3) 4)

④Displaying 4G (LTE) but Internet is not available, as shown above 4),


the camera does not recognize the correct APN setting, you need to get the
correct APN information from the 4G operator and set it up manually.

More help documentation are available in the CD information.


If your problem still cannot be solved, please contact us for help.

7. Set Micro SD card record


7.1 Set motion detection alarm recording on the phone.

10 / 12
Quick Start Guide

1. open the
“Motion Detection” 3. check the SD
card is available

2. open the
“Alarm SD REC”

7.2 Set schedule recording on phone.

2. check the SD
card is available

1. open “Enable
Record”

Motion detection recording is recommended to save storage space.

11 / 12
Quick Start Guide

7.3 Playback record on phone.

2. click online
camera

1. click here to
enter record page 3. Play or download
video files

These parameters can be set in more detail via IE browser or “HiP2P Client”.

8. More info
This manual is to help customers to know and use the camera quickly, For
detailed instructions and video tutorials please refer to the content of CD
information at www.ipcam.xin.

This manual may have descriptions and operations that do not match the
product, If you have any questions or need technical support Please feel free
to contact us or our dealers.

12 / 12

You might also like