Product Data Sheet

D-2060

Magnetic Wet Bench with 3-Phase FWDC Capability

The D-2060 is one of our most powerful wet magnetic benches. Providing 6,000 amps of 3-phase Full
Wave Direct Current, this MPI equipment offers maximum magnetization for finding surface and sub-
surface defects with clearer indications while using minimal power.
The two outputs are independently adjustable to set each magnetic field, circular or longitudinal.

BENEFITS STANDARD FEATURES

Faster part processing • 5% duty cycle of 0.5 seconds on, 10 seconds
• Reduce processing time with operator- off at maximum output
enabled automatic Double-Mag Shot • Allen-Bradley PLC
• Generate 300+ shots per hour at maximum • Simple touch-screen operator interface
unit output
• External pump system for particle bath
• Optional Database System with advanced agitation, circulation and application
touch screen operating interface and
barcode scanner eliminates time spent on • Integrated ultra-low frequency, reversing,
manual inputs and record keeping step-down DC demagnetization with 1-touch
control
Easy to use and maintain
• Make quick operational adjustments using • Low-voltage output minimizes electrical
exposure for operator safety
the simple, user-friendly operator interface
with touch-screen controls • Adjustable mag shot time from 0.5 to 2
• External pump system provides fast access seconds
for easy cleaning and service • Automatic Double-Mag Shot with 1-touch
Real-world dependability for minimal downtime control
• Allen-Bradley PLC provides reliable controls • Mag-shot-activating front push bar with 1-touch
and off-the-shelf replacements control to enable/disable this feature
• Advanced agitator system helps prevent • Large, easy-to-read digital ammeter confirms
blockages and clumping by keeping amperage sent through the part
magnetic particles well suspended • Current assurance indicator light confirms
• Rely on our industry leading warranty with magnetizing current delivery
best in-class service delivered by a global • Solid state circuitry increases lifetime and
network of trained Magnaflux authorized performance of machinery
service centers
Meets aerospace specifications
• Quick break feature on coil circuitry

• Inspect a wide range of components reliably

using machinery that meet all Nadcap
specifications
Revised: June 2018 magnaflux.com
 Product Data Sheet

PRODUCT PROPERTIES UPGRADE OPTIONS CONT.

Magnetizing Current • Auto-Bath upgrade with 22 in / 55 cm

3-Phase FWDC 6,000 A capacity decreases processing time by
Capacity
automatically clamping, bathing, magnetizing
54 in / 137 cm
and unclamping the part
Maximum Part Length* (102 in / 259 cm,
146 in / 370 cm) • XG-Series conveyer inspection booth
maximizes throughput by automatically
Maximum
transferring inspection-ready parts to an
Unsupported Part 300 lb / 136 kg
adjacent inspection booth
Weight Capacity
Maximum Supported • Inspection Enclosure Hoods with ventilation
Part Weight Capacity* 700 lb / 317 kg fan for a darkened inspection area without
(using rail-mounted (1,500 lb / 680 kg) sacrificing function and operator comfort,
steady rests) includes an EV6000 LED UV lamp, flame
resistant curtains and visible lighting
12 in / 30 cm
Maximum Part (16 in / 40 cm, 20 in / 50 • ST700 stationary overhead LED UV lamp,
Diameter* cm, 25 in / 63 cm, 30 in 100-240 V, 50-60 Hz
/ 76 cm, 36 in / 91 cm)
CONFIGURATION OPTIONS
230, 380, 415, 460, 575
Available Voltages
V • Long & Extra-Long Part Capacity to increase
max clamping length to 102 in / 259 cm or 146
Available Frequencies 50 or 60 Hz in / 370 cm
* Optional feature configurations shown in italics • 16 in / 40 cm, 20 in / 50 cm, 25 in / 63 cm, 30
in / 76 cm or 36 in / 91 cm Coil, or 19.5 in / 49
UPGRADE OPTIONS cm Clam-Shell Coil (instead of 12 in / 30 cm
• MOD 2.5 AC magnetization / demagnetization coil)
adds 2,500 A of AC current to increase • Pneumatic Tailstock makes it faster and easier
the variety and range of inspections the to position and remove longer parts from
equipment can perform between the contacts
• MOD 6.0 AC magnetization / demagnetization • Rotating Contacts with 70 lb / 31 kg part
adds 6,000 A of AC current to increase capacity minimizes part handling during
the variety and range of inspections the inspection (minimum coil size required is 16 in
equipment can perform / 41 40 cm, reduces part length capacity by 9
• Low-End Current Control increases in / 23 cm, not compatible with Auto-Bath)
equipment versatility by allowing for more • Oversized Contact Assembly for headstock
precise amperage control at lower current and tailstock, 12 x 12 in / 30 x 30 cm (minimum
to inspect small parts or for tight inspection coil size required is 16 in / 41 40 cm)
tolerance requirements
• Reinforced Rail for heavier part load, 1,500 lb /
• Database System upgrade with advanced 680 kg part capacity
touch screen operating interface and barcode
scanner for quality control traceability, record • Dual-Touch Sensor eliminates risk of injury
automation and reporting during pinch points
• NRTL Certification to CSA C22.2 No. 61010-1

Revised: June 2018 magnaflux.com