NANTONG STRONG PETROLEUM TECHNOLOGY CO.

,LTD

www.strong-oil.com
www.ntstrong.com

1
SG Model Stabbing Guide（3） CD Elevator（31）
CDZ Elevator（32）
DB Manual Tong（4） SLX Elevator（33）
B Manual Tong（5） DDZH hydraulic Elevator (34)
Casing Tong（6） Y Series Slip Type Elevator (35)
C Manual Tong（7） SJ Single Joint Elevator (36)
SDD Manual Tong（8） SP Single Joint Elevator (37)
AAX Manual Tong（9） BD Locking Ring Type Tubing Elevator（38）
Manual Tong Type LF（10）
Workover Tongs (11) XQ28/1.8Y Hydraulic Power Tong（40）
Manual Tongs Type WWC (12) XQ89/3YC Hydraulic Power Tong（42）
WWB Manual Tong (13) XQ114/6YB Hydraulic Power Tong (44)
XQ140/12A Hydraulic Power Tong (45)
WA Safety Clamps（14） Roller Kelly Bushings (46)
MP Safety Clamps（15） CU Casing Bushing (47)
SD Rotary Slips （16） MPCH Master Bushing (48)
Type DU Slips (17) Master Bushing Accessories (49)
DCS Drill Collar Slips（18） API Spider (50)
CMS-XL Casing Slips (19) JOY Spider (51)
UC-3 Casing Slip (20) SE Elevator/Spider (52)
Links (53)
Tong Dies and Slip Inserts（21） Drill Tool Gauge (54)

PSL-350 Pneumatic Slips(22)

E Pneumatic Spider(23)
C/CHD Pneumatic Spider(24)
QQP Pneumatic Spider(25) JSQW Pneumatic Slips (59)
TS Pneumatic Spider(26) Casing Protectors (60)
Hook Blooks (61)
SRE Sucker Rod Elevator(27) Swivels (62)
DDZ Drill Pipe Elevators（28）
DD Elevator （29）
TA Elevator （30）
Other
www.strong-oil.com Products (70)
www.ntstrong.com 2
 SG 型对扣器主要用于石油、天然气钻、修
井作业中油管和套管公母接头对扣时保护
管接头。该对扣器结构简单，安全可靠，
操作方便。
The SG Model Stabbing Guide is mainly
used for protecting pipe connectors when
the male and female connectors for tubing
and casing are stabbed during oil or
natural gas well drilling and well repairing
operations. This stabbing guide is simple
in structure, safe and reliable, and easy for
operation.
产品型号 适用管径（in） 产品型号 适用管径（in）
Product Applicable Pipe Product Applicable Pipe
Model Diameter Model Diameter

SG 7D 7 钻杆 Drill Pipe SG 6 C 6 套管 Casing

SG 47/8D 47/8 钻杆 Drill Pipe SG 65/8 C 65/8 套管 Casing

SG 23/8T 23/8 油管 Tubing SG 7 C 7 套管 Casing

SG 27/8T 27/8 油管 Tubing SG 75/8 C 75/8 套管 Casing

SG 31/2T 31/2 油管 Tubing SG 85/8 C 85/8 套管 Casing

SG 4 T 4 油管 Tubing SG 95/8 C 95/8 套管 Casing

SG 41/2T 41/2 油管 Tubing SG 133/8 C 133/8 套管 Casing

SG 41/2C 41/2 套管 Casing SG 16 C 16 套管 Casing

SG 5 C 5 套管 Casing SG 185/8 C 185/8 套管 Casing

SG 51/2C 51/2 套管 Casing SG 20 C 20 套管 Casing

www.strong-oil.com
www.ntstrong.com 3
 Type Q3 1/2-17/90 manual tong is used for
making up or breaking out the screws of
drill tools and casing joint or coupling. It can
be adjusted by changing lug jaws latch and
latch steps.

No. of latch lug No. of hinge pin

Handle OD mm(in) Max. Torque(KN.m) Weight(Kg)
jaws hole

1 89-152(3 1/2-6)

1 2 127-178(5-7) 90

3 152-210(6-8 1/4)

1 203-244(8-9 5/8)
2 90 370
2 270-286(10 5/8-11 1/4)

1 298-324(11 3/4-12 3/4)

3 55
2 340-365(13 3/8-14 3/8)

4 2 406-432(16-17) 55

www.strong-oil.com
www.ntstrong.com 4
 Type Q86-324/75(3 3/8-12 3/4) manual tong is
an essential tool in oil drilling operation to
fasten or remove the screws of drill pipe and
casing joint or coupling. It can be adjusted by
changing latch lug jaws and latch steps.

5a 5b 5c

5d
No. of latch lug jaws Handle shoulder Handle OD mm(in) Max. Torque KN.m
1 86-105(3 3/8-4 1/8)
5a 55
2 105-133(4 1/8-5 1/4)
1 108-133(4 1/8-5 1/4)
5b 2 127-146(5-5 3/4) 75
3 152-171(6-6 3/4)
1 133-146(5-6)
5b-1 2 146-168(6-7) 75
3 168-208(7-8)
1 168-187(6 5/8-7 3/8)
5c 2 187-203(7 3/8-8) 75 55
3 216-219(8 1/2-8 2/8)
1 216-244(8 1/2-9 5/8)
5b 55
2 270-273(10 5/8-10 3/4)
1 298(11 3/4)
5e 55
2 324(12 3/4)
www.strong-oil.com
www.ntstrong.com 5
 Type Q340-762/35(133/8-30in) Casing Tong
is capable of making up or breaking out the
screws of casing and casing coupling in
drilling operation.

Handle OD
Max. Torque(Kn.m)
mm in
340-368 13 3/8-14 1/2
368-406 14 1/2-16
406-445 16-17 1/2
445-483 17 1/2-19
483-508 19-20
508-546 20-21 1/2 35
546-584 21 1/2-23
610-648 24-25 1/2
648-686 25 1/2-27
686-724 27-28 1/2
724-762 28 1/2-30

www.strong-oil.com
www.ntstrong.com 6
 1. Q23/8-103/4 /48 C Manual Tongs is
used to fasten or remove the screws
of drill tool and casing in well drilling
operation.
2. The handing size of this type tong
can be adjusted by changing latch lug
jaws.
3. Q23/8-103/4 /48 C Manual Tongs
Rated Capacity (KN.m) is 48.

Handle OD mm(in) Rated Capacity

No. of latch No. of short latch

mm in KN.m

1 1# 60.33-93.17 2 3/8-3 5/8

2 1# 73.03-108 2 7/8-4 1/4

3 1# 88.9-133.35 3 1/2-5 1/4

48
4 1# 133.35-177.8 5 1/2-7

5 2# 177.8-219.08 7-8 5/8

6 2# 244.5-273.05 9 5/8-10 3/4

www.strong-oil.com
www.ntstrong.com 7
 Size Range:4-17in
Rated Capacity:140kN.m

Handle OD mm(in) Torque

Model Handle shoulder
in mm KN.m

1 4-8 1/2 101.6-215.9 140

2 8 1/2-12 215.9-304.8 140

SDD4-17/140 3 12-15 304.8-381 105

4 15 3/4 400.1 140

5 16-17 406.4-431.8 85

www.strong-oil.com
www.ntstrong.com 8
 Type Q73-340/75(2 7/8-13 3/8in)
AAX Manual Tong is an essential
tool in oil drilling operation to fasten
or remove the screws of drill pipe
and casing joint or coupling. It can
be adjusted by changing latch lug
jaws.

Handle OD mm(in) Rated Capacity

No. of latch
mm in KN.m
1# 73-95.25 2 3/7-8-3 3/4
55
2# 88.9-114.3 3 1/2-4 1/2
3# 107.95-133.35 4 1/4- 5 1/4
4# 127-177.8 5-7 75
5# 174.6-219.1 6 7/8-8 5/8
6# 228.6-273.05 9-10 3/4
7# 273.05-298.45 10 3/4-11 3/4 40
8# 339.7 13 3/8

www.strong-oil.com
www.ntstrong.com 9
 Manual Tongs are necessary tools applied to
make up and break out pipes.Changing lug
jaws and latch steps can adjust different
handling sizes of the tongs.They are designed
and manufactured according to API Spec 7K
Specification for drilling and well servicing
equipment.

扣合管径范围
扣合钳号 扣合台肩 Size Range(mm(in)) 最大扭矩
No.of Latch Lug jaw Latch step Rated TorquekN·m
in mm

1 2.3/8-2.7/8 60.32-73
1#
2 2.7/8-3.1/2 73-88.9

1 3.1/2-4.1/4 88.9-107.95
2#
2 4.1/4-5 107.95-127 22
1 4.3/4-5.1/2 120.65-139.7
3#
2 5.1/2-6.1/4 120.65-139.7
1 5.3/4-6.3/8 146.05-161.93
4#
2 6.3/8-7 161.93-177.8
www.strong-oil.com
www.ntstrong.com 10
 Manual Tongs are necessary tools
applied to make up and break out
pipes.Changing lug jaws and latch steps
can adjust different handling sizes of the
tongs.They are designed and
manufactured according to API Spec 7K
Specification for drilling and well
servicing equipment.

扣合管径范围Size Range(mm(in))
扣合钳号No.of Latch Lug 最大扭矩Rated
jaw in mm TorquekN.m

1# 23/8-41/2 60.3-114.3

2# 41/2-61/2 114.3-165.1
35
3 # 6 /2-8 /8
1 5 165.1-219.1

4# 95/8-103/4 244.5-273.1

www.strong-oil.com
www.ntstrong.com 11
 Manual Tongs are necessary tools
applied to make up and break out
pipes.Changing lug jaws and latch steps
can adjust different handling sizes of the
tongs.They are designed and
manufactured according to API Spec 7K
Specification for drilling and well
servicing equipment.

扣合管径范围Size Range(mm(in))
扣合钳号No.of Latch Lug jaw 最大扭矩Rated TorquekN·m
mm in

1# 60.3-88.9 2.3/8-3.1/2

2# 73-107.95 2.7/8-4.1/4 27

3# 101.6-146.05 4-5.3/4

4# 146.05-177.8 5.3/4-7
20
5# 184.15-219.1 7.1/4-8.5/8

6# 244.475-273.05 9.5/8-10.3/4 14

www.strong-oil.com
www.ntstrong.com 12
www.strong-oil.com
www.ntstrong.com 13
 WA型安全卡瓦用于卡持平接头管柱和钻铤，有
两种型号：WA-C型适用管径为31/2-155/8 inch
（88.9mm-396.9mm）,WA-T型适用管径为11/8-
41/2 inch（28.6mm-114.3mm）.

WA-C Safety clamps are tools for handling

flush joint pipe and drill collar can
accommodate pipe from 31/2-155/8 inch (88.9-
396.9mm). Model WA-T Safety Clamps can
accommodate pipe from 11/8-41/2 inch (28.6-
114.3mm) OD.

Handle OD Weight
Model Qty of Chain Links
mm(in) Kg lb
88.9-117.3(3 1/2-4 5/8) 7 20.9 46
114.3-142.9(4 1/2-5 5/8) 8 25.0 55
139.7-168.3(5 1/2-6 5/8) 9 27.7 61
135.1-193.7(6 1/2-7 5/8) 10 29.1 64
190.5-219.1(7 1/2-8 5/8) 11 31.3 69
215.9-244.5(8 1/2-9 5/8) 12 32.7 72
WA-C
241.3-269.9(9 1/2-10 5/8) 13 40.0 88
266.7-295.3(10 1/2-11 5/8) 14 41.8 92
292.1-320.7(11 1/2-12 5/8) 15 44.0 97
317.5-346.1(12 1/2-13 5/8) 16 46.3 102
342.9-371.5(13 1/2-14 5/8) 17 48.6 107
368.3-396.9(14 1/2-15 5/8) 18 50.9 112
28.6-50.8(1 1/8-2) 4 16.3 36
WA-T 54.0-82.6(2 1/8-3 1/4) 5 18.2 40
88.9-114.3(3 1/2-4 1/2) 6 20.0 44

www.strong-oil.com
www.ntstrong.com 14
 1. MP safety clamps are tools for
handing flush joint pipe and drill
collar.

2. MP Safety Clamps have 5 type:

MP-S,MP-R,MP-M,MP-L,MP-XL.

Type Pipe O.D(in) No. of Chain Links

27/8-41/8 7
MP-S
4-5 8
4 -55/8
1/2 7
51/2-7 8
MP-R 63/4-81/4 9
8-91/4 10
91/4-101/2 11
101/2-111/2 12
111/2-121/2 13
MP-M 121/2-135/8 14
135/8-143/4 15
143/4-157/8 16
157/8-17 17
MP-L 17-181/2 18
181/8-193/8 19
193/8-203/8 19
203/8-211/2 20
21-225/8 21
225/8-233/4 22
MP-XL 233/4-247/8 23
247/8-26 24
26-271/8 25
293/8-301/2 28
35-361/8 33
www.strong-oil.com
www.ntstrong.com 15
 Handle OD mm(in) Inserts
Type Weight
in mm Code Quantity
2 3/8 2 3/8 60.3 2160 18 38
SDS-S 3 1/2 2 7/8 2 7/8 73 2161 18 37
3 1/2 3 1/2 88.9 2162 18 36
2 3/8 2 3/8 60.3 2160 24 71
3 1/2 2 7/8 2 7/8 73 2161 24 68
3 1/2 3 1/2 88.9 2162 24 66
SDS
3 1/2 3 1/2 88.9 2163 36 83
4 1/2 4 4 101.6 2164 36 80
4 1/2 4 1/2 114.3 2165 36 76
2 3/8 2 3/8 60.3 2160 30 98
3 1/2 2 7/8 2 7/8 73 2161 30 95
3 1/2 3 1/2 88.9 2162 30 92
3 1/2 3 1/2 88.9 2163 45 105
SD Rotary Slips can 4 1/2 4 4 101.6 2164 45 101
accommodate drill pipe from 2 4 1/2 4 1/2 114.3 2165 45 96
SDML
3/8 to 5 1/2 inches (60.3- 4 4 101.6 2168 45 103.5
5 4 1/2 4 1/2 114.3 2166 45 100
139.7mm)O.D. They are 5 5 127 2167 45 95
classified as type Short (SDS), 4 1/2 4 1/2 114.3 2168 45 101
Medium (SDML) and Extra Long 5 1/2 5 5 127 2169 45 97
5 1/2 5 1/2 139.7 2170 45 92
(SDXL) according to handling 3 1/2 3 1/2 88.9 2163 54 118
length. SDS slips are designed 4 1/2 4 4 101.6 2164 54 114
for shallow hole drilling, SDML 4 1/2 4 1/2 114.3 2165 54 108
4 4 101.6 2168 54 116
slips are the perfect choice for SDXL 5 4 1/2 4 1/2 114.3 2166 54 112
all medium depth drilling, SDXL 5 5 127 2167 54 106
slips are designed for deep 4 1/2 4 1/2 114.3 2168 54 116
5 1/2 5 5 127 2169 54 111
drilling. 5 1/2 5 1/2 139.7 2170 54 105

www.strong-oil.com
www.ntstrong.com 16
www.strong-oil.com
www.ntstrong.com 17
 There are three model of DCS
Drill Collar Slips: S、R and L.
They can accommodate drill
collar from 3 inch (76.2mm) to 14
inch (355.6mm) O.D.

Model DCS-S DCS-R DCS-L

6 3/4-8 9 1/4-11 11- 12

in 3-4 4-4 7/8 4 1/2-6 5 1/2-7 8-9 1/2 8 1/2-10 12-14
1/4 1/4 3/4
Drill
76.2 101.6 114.3 139.7 171.5 203.2 215.9 235.0 279.4 304.8
Collar OD
mm / / / / / / / / / /

101.6 123.8 152.4 177.8 209.6 241.3 254 285.8 323.9 355.6

kg 51 47 54 51 70 78 84 90 116 107
Weight
lb 112 103 120 112 154 173 185 198 256 237

Insert Bowl NO. API or NO.3 NO.2 NO.1

www.strong-oil.com
www.ntstrong.com 18
 Casing Slips can accommodate
casing from 6 5/8 to 30 inch
(168.3-762mm) OD.

in 6 5/8 7 7 5/8 8 5/8 9 5/8 10 3/4 11 3/4 13 3/8 16 18 5/8 20 24 26 30

Casing
OD
mm 168.3 177.8 193.7 219.1 244.5 273.1 298.5 239.7 406.4 473.1 508 609.6 660.4 762

kg 89 84 75 82 87 95 118 112 140 167 174 201 220 248

Weight
lb 196 184 166 181 192 209 260 247 308 367 383 443 486 546

Total number
12 12 12 13 14 15 17 18 21 25 26 30 33 37
of segments

API or No.3 No.2 No.1 Go together with a tube repairs the heart

www.strong-oil.com
www.ntstrong.com 19
 .

www.strong-oil.com
www.ntstrong.com 20
 Description of Suitable Products Suitable OD
ZQ100 Hydraulic pneumatic Tongs 3 1/2-8
ZQ50 Hydraulic pneumatic Tongs 73-160mm
ZQ20 Hydraulic pneumatic Tongs 2 1/2-3 1/2
Q33/8-123/4/75 Drilling Tongs 3 3/8-12 3/4
Q22/8-103/4/35 Well Repair Tongs 2 3/8-10 3/4
Q133/8-251/2/35 Casing Tongs 13 3/8-25 1/2
TQ35 Hydraulic Casing Tongs 5 1/2-13 3/8
TQ16 Hydraulic Casing Tongs 4-7
TQ20 Hydraulic Casing Tongs 4-13 3/8
W-SDS Drill Pipe Slips 2 3/8-4 1/2
W-SDML Drill Pipe Slips 2 3/8-5 1/2
W-SDXL Drill Pipe Slips 3 1/2-5
ZC31/2-5 Drill Pipe Slips 3 1/2-5
ZC5-7 Drill Pipe Slips 5-7
The manual tong dies and slip W31/2/75（125）Slips for Drill Pope Running 2 3/8、2 7/8、3 1/2
inserts are made of high-quality W5/75（120、200）Slips for Drill Pope Running 4、4 1/2、5
alloy steel. They are chemically WT Slips for Drill Pope Running 4 1/2-11 3/4
heat-treated for surface DCS-S Slips for Drill Pope Running 3-4 7/8
DCS-R Slips for Drill Pope Running 4 1/2-7
hardness. They are wear-
DCS-L Slips for Drill Pope Running 6 3/4-14
resisting and corrosion-resisting
8 Slips for Drill Pope Running 8
and they have a long service life. 9 Slips for Drill Pope Running 9
We can also design and Casing Pipe Slips 6 5/8-30
manufacture special inserts WA-C Safety Pipe Slips 3 1/2-15 5/8
according to specifications.We WA-T Safety Pipe Slips 1 1/8-4 1/2
can also design and YQ3 Oil Pipe Power Tongs 60-89
manufacture special inserts YQ6 Oil Pipe Power Tongs 73-114
YQ12 Oil Pipe Power Tongs 73-141mm
according to your needs (as
www.strong-oil.com
your drawing or sample)! www.ntstrong.com 21
 Type PSL-350
Max Load (KN) 350ton
Pipe OD 23/8-7
Cylinder Work Pressure 588∼ 686Kpa
Suitable Bushing >=23in master bushing
Wedge type/Eccentric typeAccording to
Locking way
your needs
Suitable clamps SDML\SDXL series
23/8 23/8 60.3 2160 30 98
31/2 27/8 27/8 73 2161 30 95
31/2 31/2 88.9 2162 30 92
31/2 31/2 88.9 2163 45 105
41/2 4 4 101.6 2164 45 101
41/2 41/2 114.3 2165 45 96
SDML
4 4 101.6 2168 45 103.5
5 41/2 41/2 114.3 2166 45 100
1. Type : PSL-350 5 5 127 2167 45 95
41/2 41/2 114.3 2168 45 101
2. Many kinds of pipe size (out):
51/2 5 5 127 2169 45 97
23/8-7 51/2 51/2 139.7 2170 45 92
3. Air cylinder working pressure: 31/2 31/2 88.9 2163 54 118
588~686 Kpa 41/2 4 4 101.6 2164 54 114
41/2 41/2 114.3 2165 54 108
4. Max.load TONS: 350 T
4 4 101.6 2168 54 116
5. Locking Types: according to 5 41/2 41/2 114.3 2166 54 112
your choice 5 5 127 2167 54 106
SDXL
6. Suitable for: SDML/SDXL 41/2 41/2 114.3 2168 54 116

Slips 51/2 5 5 127 2169 54 111

51/2 51/2 139.7 2170 54 105
5 7/8 5 7/8 149.2 2656 72
7 6 5/8 6 5/8 168.2 2172 72
7 7 177.8 2173 72
www.strong-oil.com
www.ntstrong.com 22
 Type E Pneumatic spiders are utilized to
handle drill pipe and tubing in oil well
repairing. This type of spider can
accommodate pipe from 2 3/8 to 7 5/8
inch, the rated capacity is 175 ton.

Handle OD Cylinder Working Pressure

Slip Body Size
mm in MPa psi
60.3 2 3/8
3 1/2 in 73 2 7/8
88.9 3 1/2
101.6 4
114.3 4 1/2
5 1/2 in
127 5 0.6-0.9 87-130
139.7 5 1/2
158.8 6 1/4
7 in 168.3 6 5/8
177.8 7
7 5/8 in 193.7 7 5/8

www.strong-oil.com
www.ntstrong.com 23
 Type C/CHD Pneumatic spiders are
utilized to handle drill pipe and tubing in
oil well repairing. This type of spider can
accommodate pipe from 1.315 to 5 1/2
inch, the rated capacity of type C Spider
is 80 ton, and the rated capacity of type
CHD Spider is 120 ton.

Handle OD
Cylinder Working Pressure
Slip Body Size C/80T CHD/120T
mm in mm in MPa psi
33.4 1.315 33.4 1.315
42.2 1.66 42.2 1.66
2 1/16 in
48.3 1.9 48.3 1.9
52.4 2 1/16 52.4 2 1/16
60.3 2 3/8 60.3 2 3/8
3 1/2 in 73 2 7/8 73 2 7/8
0.6-0.9 87-130
88.9 3 1/2 88.9 3 1/2
88.9 3 1/2 88.9 3 1/2
4 1/4 in 101.6 4 101.6 4
114.3 4 1/2 114.3 4 1/2
5 in 127 5 127 5
5 1/2 in 139.7 5 1/2 139.7 5 1/2
www.strong-oil.com
www.ntstrong.com 24
www.strong-oil.com
www.ntstrong.com 25
www.strong-oil.com
www.ntstrong.com 26
www.strong-oil.com
www.ntstrong.com 27
 DDZ型对开式吊卡，适用于提升18度锥台肩钻杆、钻具
等。负载从100吨到750吨。扣合管径从2.3/8" to 6.5/8"。
吊卡按API Spec 8C《钻井和采油提升设备规范》设计、
制造。
DDZ series elevators are conventional center latch
elevator with 18 degree taper shoulder, applied in
handling the drilling pipe and drilling tools, etc. The
load ranges from 100 tons to 750 tons. The size
ranges are from 2.3/8" to 6.5/8". DDZ drill pipe
elevators are forged from high quality alloy steel, heat-
treated, and NDT tested. The products are designed
and manufactured according to the requirements in
API 8C Specification for Drilling and Production
Hoisting Equipment.

Model Size(in) Rated Capacity (short tons) Remark

DDZ -100 2.3/8-5 100 MG
DDZ -150 2.3/8-5.1/2 150 RG
DDZ -250 2.3/8-5.1/2 250 MGG
DDZ -350 3.1/2-5.7/8 350 GG
DDZ -350TD 3.1/2-5.7/8 350 For Top Drive
DDZ -500 3.1/2-6.5/8 500 HGG
DDZ -500TD 3.1/2-6.5/8 500 For Top Drive
DDZ -750 4-6.5/8 750

www.strong-oil.com
www.ntstrong.com 28
 DD型对开式吊卡主要用于石油天然气钻、修井作业
过程中油管、套管、钻杆、钻铤的卡持与提升。产品
按API Spec 8C规范要求设计制造。

Model DD center latch elevator with square

shoulder are suitable for handling drill collar, casing
and tubing. The load ranges from 150 tongs to 350
tongs. The size ranges from 2 3/8" to 5 1/2" in. The
products are designed and manufactured according
to the requirement in API Spec 8C Specification for
Drilling and Production Hoisting Equipment.

卡管径 Size(in)
额定载荷Rate Cap.
型号Model
(Short Tons)
钻杆(DP) 套管(Casing) 油管(Tubing)

DD-150 2- 5 1/2 4 1/2-5 1/2 2 3/8-4 1/2 150

DD-250 2 3/8-5 1/2 4 1/2-5 1/2 2 3/8-4 1/2 250

DD-350 2 3/8-5 1/2 4 1/2-5 1/2 2 3/8-4 1/2 350

www.strong-oil.com
www.ntstrong.com 29
 TA型对开式吊卡主要用于石油天然气钻、修井作业过
程中油管、套管、钻铤的卡持与提升。产品按API
Spec 8C规范要求设计制造。

Model TA center latch elevators with square

shoulder are suitable for handling drill collar, casing
and tubing. The products are designed and
manufactured according to the requirement in API
Spec 8C Specification for Drilling and Production
Hoisting Equipment.

卡持管径 Size(in)
额定载荷Rate
型号 Model 油管 Tubing Cap. (Short
钻铤 DC 套管(Casing) Tons)
NU EU

TA-35 2 7/8-3 1/8 1.05-2 7/8 1.05-2 7/8 / 35

TA-65 2 7/8-3 1/8 1.66-2 7/8 1.66-2 7/8 / 65

TA-100 3 7/8-5 1/4 2 3/8-5 2 3/8-5 / 100

TA-150 4 1/8-11 1/4 / / 4 1/2-10 3/4 150

www.strong-oil.com
www.ntstrong.com 30
 CD型侧开式吊卡主要用于石油天然气钻、修井作业
过程中油管、套管、钻杆、钻铤的卡持与提升。产品
按API Spec 8C规范要求设计制造。

Model CD side door elevators with square shoulder

are suitable for handling tubing, casing, drill pipe
and drill collar in oil and natural gas drilling, well
construction. The products are designed and
manufactured according to the requirement in API
Spec 8C Specification for Drilling and Production
Hoisting Equipment.

型号 Model 卡持管径 Size(in) 额定载荷Rate Cap. (Short Tons)

CD-100 2 3/8-5 1/2 100
CD-150 2 3/8-14 150
CD-200 2 3/8-14 200
CD-250 2 3/8-20 250
CD-350 4 1/2-20 350
CD-500 4 1/2-14 500
CD-750 4 1/2-9 7/8 750

www.strong-oil.com
www.ntstrong.com 31
 CDZ型侧开式吊卡，适用于提升18°锥台肩钻杆、钻
具等。吊卡按API Spec 8C《钻井和采油提升设备规
范》设计、制造。

CDZ drilling pipe elevator is mainly used in the

holding and hoisting of drilling pipe with 18 degree
taper and tools in oil and natural gas drilling, well
construction. The products shall be designed and
manufactured according to the requirements in API
Spec 8C Specification for Drilling and Production
Hoisting Equipment.

型号 Model 卡持管径 Size(in) 额定载荷Rate Cap. (Short Tons)

CDZ-150 2 3/8-5 1/2 150

CDZ-250 2 3/8-5 1/2 250

CDZ-350 2 7/8-5 1/2 350

CDZ-500 3 1/2-5 1/2 500

www.strong-oil.com
www.ntstrong.com 32
 SLX型侧开式吊卡主要用于石油天然气钻、修井作业
过程中油管、套管、钻杆、钻铤等管柱的卡持与提升。
产品按API Spec 8C规范要求设计制造。

Model SLX side door elevator with square shoulder

are suitable for handling tubing, casing, drill pipe
and drill collar in oil and natural gas drilling, well
construction. The products are designed and
manufactured according to the requirement in API
Spec 8C Specification for Drilling and Production
Hoisting Equipment.

型号 Model 卡持管径 Size(in) 额定载荷Rate Cap. (Short Tons)

SLX-65 3 1/4-14 3/8 65

SLX-100 2 3/8-5 3/4 100

SLX-150 5 1/2-13 5/8 150

SLX-250 5 1/2-30 250

SLX-350 4 1/2-14 350

www.strong-oil.com
www.ntstrong.com 33
DDZH hydraulic elevator is center latch elevator.
Through changing the bushing, it can handle
drilling pipe, drill collar, casing and tubing and uses
the hydraulic control system, which makes the
operation more convenient, effectively reduces the
workers’ labor intensity and improves the work
efficiency; it can also realize remote control and
make the use safer and more reliable. The
products shall be designed and manufactured
according to the requirements in API Spec 8C
Specification for Drilling and Production Hoisting
Equipment

www.strong-oil.com 34
www.ntstrong.com
 The slip type elevator is an
indispensable tool in holding and
hoisting drilling pipes, casing and
tubing in the oil drilling and well
tripping operation. It’s especially
suitable for the hoisting of
integrated tubing sub, integral
joint casing and electric
submersible pump column. The
products shall be designed and
manufactured according to the
requirements in API Spec 8C
Specification for Drilling and
Production Hoisting Equipment

www.strong-oil.com
www.ntstrong.com 35
 SJ series auxiliary elevator is mainly
used as a tool in handling single casing
or tubing in oil and natural gas drilling
and cementing operation. The products
shall be designed and manufactured
according to the requirements in API
Spec 8A/8C Specification for Drilling and
Production Hoisting Equipment

www.strong-oil.com
www.ntstrong.com 36
 Type SP auxiliary elevators are the
requisite hoisting tools for catching
pipe with degree up and down.

扣合管径（in）Pipe O.D 卡块代号 角度 最大载荷(kN)

in in Block number Angle Max Load

3 1/2 88.9 SP35-18

4 101.6 SP40-18

4 1/2 114.3 SP45-18 18°

5 127 SP50-18
45
5 1/2 139.7 SP55-18

6 5/8 168.3 SP-658

7 180.98 SR-700 5°

7 5/8 193.7 SP-758

www.strong-oil.com
www.ntstrong.com 37
1.Description
BD Locking ring type tubing elevators are
conventional tools to handle the tubing in the oil and gas
drilling operation.
BD Locking ring type tubing elevators series are
made from high quality alloy steel, heat-treated and
NDT. And can handle tubing range from 1.9in to 4
1/2EU O.D. Rating loads of Tubing Elevators are 40t
(360kN), 65t (585kN), 75t (675kN). All the technical data
and property of the elevator conform to API Spec 8A, 8C
and SY/T 5112.
The compositions and their meanings for specifications
BD Elevators:

2.Structural
BD Tubing Elevators are available with two types:
single-latch and double-latch. Single-latch type one is
equipped one latch assembly in the upper bore, while
double-latch type one is equipped two latch assemblies
both in the upper and lower bores. The body and ring-
latch-lock are mainly to handle tubing.
Ring-latch-lock is fixed in eccentric notch of the
body. With handle and M12 flat-ended screw, the state of
ring-latch-lock can be range within 110° angle.
Compressed spring is fixed in handle, when the handle
is pull outwards approximately 8mm, the ring-latch-lock
can be rotated, and when the ring-latch-lock is located
"open" or "close", the handle can be fit in the position-fix
hole.
38
 Applicable Elevators bore
reting
Specification for drill O.D.(mm)(top Elevators tag
load
pipes(in) bore×bottom bore)
BD1.9/40(50/360) 1.9 50 BD1.9/40 SR1 API 8C PSL1
BD1.9EU/40(50/360) 1.9EU 55.95×55 BD1.9EU/40 SR1 API 8C PSL1
BD2 3/8/40(63/360) 2 3/8 63 40t(360k BD2 3/8/40 SR1 API 8C PSL1
BD2 3/8EU/40(63/360) 2 3/8EU 68.66×63 N) BD2 3/8EU/40 SR1 API 8C PSL1
BD2 7/8/40(75/360) 2 7/8 75 BD2 7/8/40 SR1 API 8C PSL1
BD2 7/8EU/40(75/360) 2 7/8EU 81.36×75 BD2 7/8EU/40 SR1 API 8C PSL1
BD1.9/65(50/585) 1.9 50 BD1.9/65 SR1 API 8C PSL1
BD1.9EU/65(50/585) 1.9EU 55.95×55 BD1.9EU/65 SR1 API 8C PSL1
BD2 3/8/65(63/585) 2 3/8 63 BD2 3/8/65 SR1 API 8C PSL1
BD2 3/8EU/65(63/585) 2 3/8EU 68.66×63 BD2 3/8EU/65 SR1 API 8C PSL1
BD2 7/8/65(75/585) 2 7/8 75 BD2 7/8/65 SR1 API 8C PSL1
BD2 7/8EU/65(75/585) 2 7/8EU 81.36×75 65t(585k BD2 7/8EU/65 SR1 API 8C PSL1
BD3 1/2/65(91/585) 3 1/2 91 N) BD3 1/2/65 SR1 API 8C PSL1
BD3 1/2EU/65(91/585) 3 1/2EU 98.02×91 BD3 1/2EU/65 SR1 API 8C PSL1
BD4/65(104/585) 4 104 BD4/65 SR1 API 8C PSL1
BD4EU/65(104/585) 4EU 110.72×104 BD4EU/65 SR1 API 8C PSL1
BD4 1/2/65(117/585) 4 1/2 117 BD4 1/2/65 SR1 API 8C PSL1
BD4 1/2EU/65(117/585) 4 1/2 123.42×117 BD4 1/2EU/65 SR1 API 8C PSL1
BD1.9/75(50/675) 1.9 50 BD1.9/75 SR1 API 8C PSL1
BD1.9EU/75(50/675) 1.9EU 55.95×55 BD1.9EU/75 SR1 API 8C PSL1
BD2 3/8/75(63/675) 2 3/8 63 BD2 3/8/75 SR1 API 8C PSL1
BD2 3/8EU/75(63/675) 2 3/8EU 68.66×63 BD2 3/8EU/75 SR1 API 8C PSL1
BD2 7/8/75(75/675) 2 7/8 75 BD2 7/8/75 SR1 API 8C PSL1
75t(675k
BD2 7/8EU/75(75/675) 2 7/8EU 81.36×75 BD2 7/8EU/75 SR1 API 8C PSL1
N)
BD3 1/2/75(91/675) 3 1/2 91 BD3 1/2/75 SR1 API 8C PSL1
BD3 1/2EU/75(91/675) 3 1/2EU 98.02×91 BD3 1/2EU/75 SR1 API 8C PSL1
BD4/75(104/675) 4 104 BD4/75 SR1 API 8C PSL1
BD4EU/75(104/675) 4EU 110.72×104 BD4EU/75 SR1 API 8C PSL1
BD4 1/2/75(117/675) 4 1/2 117 BD4 1/2/75 SR1 API 8C PSL1
BD4 1/2EU/75(117/675) 4 1/2EU 123.42×117 BD4 1/2EU/75 SR1 API 8C PSL1

www.strong-oil.com
www.ntstrong.com
39
Description:
The XQ28/1.8Y Hydraulic Power Tongs feature an
open-throat design that provides fast, convenient
make-up and break out of threaded sucker-rod
connections in well-servicing process.
The master tongs are driven by a slow-spinning
hydraulic motor that delivers high torque. Hand-
operated directional valves are directly matched
up with the motor for motion control. The whole
installation is light weight, compact and easy to
carry.

The hydraulic backup tongs come together with

the master tongs to confirm combination tongs.
Via operating the said directional control value,
the back up tongs would synchronize with master
tongs in tightening up or loosening the sucker rod.
Both the master tongs and backup tongs are of
negative camber roll climbing two-way clamping
mechanism. To reverse the rotation of these tongs,
users only need to turn around the knobs on them.
Tongs dies are also available in different
specifications to fit diverse sucker-rods or oil pipes.
Additionally, our hydraulic tubing tongs can
operate at either one of two speeds for jerking and
rotating movements. This allows for improved
working efficiency.
40
 抽油杆Sucker Rod CYG 16-28(16,19,22,25,28)5/8-1
适用范围 Applicable Range mm(in) 1/8(5/8,6/8,7/8,1,1 1/8)油管 Tubing Outside Diameter
Φ48~60(1 7/8~2 3/8)
高档最大扭矩Max. Torque in high Gear kN.m(ft-lbs) 0.7(516)
低档最大扭矩Max. Torque in Low Gear kN.m(ft-lbs) 1.8(1328)
高档最高转速Max. Speed in High Gear(r/min) 104
抵挡最高转速Max. Speed in Low Gear(r/min) 40
最大工作压力Max. Working Pressure Mpa(psi) 10(1450)
最大供油量Max. Oil Supply L/min(gpm) 65(17.2)
钳头开口尺寸Tong Opening Size mm(in) 63(2 1/2’’)
外形尺寸：长×宽×高
543×334×404mm(21.4’’×13’’×16’’)
Overall Dimension of Combination Tongs
移送质量Max. Capacity of Hydraulic Power Tong kg(lbs) 95(210)

www.strong-oil.com
www.ntstrong.com
41
Model XQ89/3YC Hydraulic Power Tong is a
special device for well service, which used to
make up and break out tubing thread. It is an
improved new product based on Model XYQ3C
hydraulic power tong. Driving by hydraulic motor
with low speed and large torque, model“H”
manual control valve simply matching with oil
motor. It’s a lighter hydraulic power tong for well
service.

42
www.strong-oil.com
www.ntstrong.com
43
 Model XQ114/6YB Hydraulic Power Tongs is a
medium sized, open mouth tongs, which is
currently used in the workover to assemble and
disassemble the 73(2 7/8′′)、89(3 1/2′′)、114(4
1/2′′)mm oil pipes. This tongs adopts the
advanced steering brake mechanism and oil
pipe clamping mechanism, it is of the simple
structure, reliable function, long life service,
good performance, low noise etc features, it is a
ideal equipment in the workover operation.

Model XQ114/6YB(6I)
Size Range mm(in.) Φ60~114（2 3/8-4 Opening Size 118(4.65)
1/2） mm(in)
High gear Max.Torque 1.5(1106) Overall 850*500*600(33.5
kN.m(Ibf.ft) demension ×19.7×26)
mm(in.)
Lower gear 6.0(4425) Weight kg(Ib) 260(573)
Max.Torque
kN.m(Ibf.ft)
High gear Max.speed 85 Max.working 12(1740)
r/min pressure
Low gear Max.speed 20 Max.oil supply 100(26.42)
r/min L/min(gpm)
44
Model XQ140/12YA
hydraulic power tong is a
mouth opening power tong
which can quickly make-up
or break-out pipe strings in
well service.It is used in
making-up or breaking-out
tubing,small drilling pipe
and small casing with
diameters from 2 7/8"-5
1/2"(73mm to 140mm).
Compared with the same
type of tongs by other tong
makers, it features simple
structure, convenient
operation,reliable
performance,long life,broad
application range and large
torque.It is widely used in
onshore or offshore
oilfields.It can reduce
workload,improve work
efficiency and the well
service quality.

45
 Roller Kelly Bushings can be
classed as two types based on
different ways of drive, square
drive and pin drive. Also they can
be classed as three types based
on different style, heavy, medium
and light-duty. They are used for
17.1/2 to 49.1/2inch rotary tables.
They are designed and
manufactured according to API
Spec 7K.

applicable size of kelly（in）

Model Type Drive way
Square Hex

HDS Square drive 21/2-6 3-6

27-HDP Heavy duty 21/2-6 3-6

Pin drive
20-HDP 21/2-6 3-6

RTM4 Medium duty 21/2-51/4 3-41/4

Square drive
RTS4 Light duty 21/2-41/4 3-41/4

www.strong-oil.com
www.ntstrong.com 46
 Rotary Tubulars OD（in）
table Model 23/8- 95/8- 113/4- 185/8-
size 16 24 26 30
85/8 103/4 133/8 20
Bushin Bushin
g g
17 /2-
1 3102+i 3102+ Bushin
CU — — — — —
20 /2
1 nsert insert g 3102
bowl bowl
1809 1902
Bushin Bushin
Bushin Bushin
g g
g g
3103+ 3103+
3103+ 3103+ Bushin
271/2 CUL insert insert — — —
Our CU, CUL, CB and insert insert g 3103
bowl bowl
etc. Casing Bushings 3105+ 3105+
bowl bowl
3105 3104
can handle casings 1809 1902
from 2.3/8 to 30inch Bushin Bushin
Bushin Bushin
g g
O.D.. Type CU & CUL 6695+ 6695+
g g
are solid bushings and 6695+ 6695+ Bushin
271/2 insert insert — — —
insert insert g 6695
Type CB are split bowl bowl
bowl bowl
6126A 6126A
bushings. They are 6126A 6127
+6115 +6114
designed and CB Bushin Bushin
Bushin Bushin
manufactured g g
g g
according to API Spec (185/8- (185/8- Bushin Bushi Bushi
(18 /8- (185/8-
5
20in)+ 20in)+ g ng ng Bushing
7K. 371/2
insert insert
20in)+ 20in)+
(18 /8- 1125 1645
5 11763
insert insert
bowl bowl 20in) 3 4
bowl bowl
6126A 6126A
6126A 6127
+6115 +6114
Note ： size 185/8-20in including CB10187、CB10188、CB10189、CB11553.

www.strong-oil.com
www.ntstrong.com
47
 Rotary table size
Model Insert bowl Tubulars OD（in）
（in）
Insert bowl 1011 23/8-75/8
171/ 2—23
Extended insert bowl
23/8-85/8
1024
Insert bowl 1022 23/8-75/8
MSS(Solid)
Extended insert bowl
23/8-85/8
271/ 2 1025
Insert bowl 1026 95/8-103/4
Insert bowl 2002 113/4-133/8
MSS(Split) 171/2—271/2 — 23/8-75/8

Our company can Insert bowl 1809 23/8-85/8

manufacture master Insert bowl 1902 95/8-103/4
bushings and insert 201/2-221/2 Master bushing1805-
113/4-133/8
1
bowls sizing from
Master bushing19333 113/4-133/8
17.1/2 to 49.1/2inch. MSPC(Solid)
No.3 Insert bowl
They are cast with 1810
23/8-85/8

high-quality alloy steel 23-271/2

No.2 Insert bowl
95/8-103/4
1904
and the sizes conform No.1 Insert bowl
113/4-133/8
to API Spec 7K. There 1903
MDSP(Split) 171/2-201/2 — 23/8-85/8
are two types, pin drive
MSP(Split) 271/2 — 23/8-85/8
and square drive. API
No.3 Insert bowl
standard rotary slips, 6608
23/8-85/8

drill collar slips, casing 371/2

No.2 Insert bowl
95/8-103/4
6609
slips and roller kelly MPCH
No.1 Insert bowl
113/4-133/8
bushings can be 6610

contained in them. 491/2 MPCH371/2 23/8-133/8

www.strong-oil.com
www.ntstrong.com
48
www.strong-oil.com
www.ntstrong.com
49
 Both API Spider and API
split master bushing have
the same inner diameter
with of 4in/ft on the
diameter taper.The spider
body is made of high-
quality alloy steel and
heat-treated
especially.The spiders are
not so weighty and easy
to operate. They are
designed and
manufactured according
to API Spec 7K
Specification for drillig
and well servicing
equipment.
API Spider

Model Applicable Diameter of Tubulars(in) Rated Capacity(short tons)

8.5/8 2 3/8-8 5/8 100
9.5/8 9 5/8-10 3/4 150

50
 The Hinged Casing Spider
has a hinged spider body
with asplitinsert bowl.It
is put abov erotry table
and is suitable for most
casings of different sizes.
It is designed and
manufactured according
to API Spe 7K Speifiaton
for drilling and well
servicing equipment.

JOY Spider
Model Applicable Diameter of Taper Rated Capacity(short tons)
Tubulars(in)
JOY 13 3/8-200 7~8 5/8 1:3
9~13 3/8 1:4
JOY 20-200 7~8 5/8 1:3 200
9~20 1:4
JOY 30-200 16~30 1:4
JOY 36-200 18 5/8~36 1:4

51
 Slip Type Elevators/ Spiders
are mechanized tools with
air operating.They can
handle casings up to 24 1/2
inch.They are easy to operate
and dependable enough.Also
they can reduce
workload.They are designed
and manufactured according
to API Spec 8A/8C
Specification for drilig and
production hoisting
equipment.

Model Diameter of Rated Work Max.

Tubulars(in) Capacity(T) Pressure(Mpa) Pressure(MPa)
SE 150 2 3/8-5 1/2 150 0.6-0.8 1
SE 350(14) 4-14 350 0.6-0.8 1
SE 350 (20) 16-20 350 0.6-0.8 1
SE 500(14) 4-14 500 0.6-0.8 1
SE 500(24 1/2) 16- 24 1/2 500 0.6-0.8 1
SE 750 4 1/2-14 750 0.6-0.8 1
SEB 350 4 1/2-13 3/8 350 0.6-0.8 1
52
 Weldless links are forged
with high-quality alloy
steel. They are designed
and manufactured
according to API Spec
8A/8C Specification for
drilling and production
hoisting equipment.

Type Specification Rated Capacity Length(mm)

(short tons)
Weldless Links DH150 150 1800
DH250 250 2700
DH350 350 3300
DH500 500 3600
Perfection SH75 75 1500
Links SH100 100 1500
SH150 150 1700
53
 Type ZG130-320/270-510 Versatile Drill Tool
Gauge is a new type special tool to measure the drill
tool which is developed and improved based on the
original bit gage. It extends the measuring range to
the maximum, and has improve the disadvantage of
the original bit gage which is short measuring range
to make the measuring range limited, and meet the
more requirements in filed use. It also adopts a new
design of aluminum alloy shell, not only ensured the
anti-corrosion of the drill tool gauge, but also
reduces the self-weight of the gauge body to the
maximum extend.
It can measure the different kinds of bit, drilling
tool stabilizer, casing stabilizer, fit joint, drill collar,
drill pipe, fishing tool, and to measure the O.D. or
inclusive O.D. of other objects with different size,
which are within it’s measuring range. It is simple
and practical, and is convenient to make reading.

Technical parameters：
Type：ZG130-320;ZG 270-510
Measuring Range：130mm-320mm ;270-510mm
Precision：1mm

54
 Sucker Rod Hook is one of
the hoisting equipments or
sucker rods. It is suitable
for all depths and
operating conditions
complete with single-hand
latch construction and
safety ring. It is safe and
dependable enough.The
sucker rod hook is
designed and
manufactured according to
API Spec 8A/8C
Specification for drilling
and production hoisting
equipment.

Model Rated Capacity(T) Length

RH20 20 488mm
RH25 25 494mm
RH25L 25 798mm
RH35 35 960mm

55
 Sucker Rod Wrench is made of
high-quality alloy steel, and
boasts the advantages of
hardness and abrasion
resistance.Its opening is
applicable to the square
shape of the steel-made
sucker rod. The balanced
design of wrench can reduce
the fatigue of users, which is
an outstanding tool for
manual mounting and
demounting sucker rod.

Specification of Applicable 5/8 3/4 7/8 7/8HY 1 1 1/8

Sucker Rod(in)

56
 Sucker Rod Elevating
Socket is used to handle
single sucker rods. It is
hung on the nacelle of
workover rig with
maximum working load
400lb. It is used for 1/2 to
1 1/8 inch sucker rods.

Specification of Applicable 5/8 3/4 7/8 7/8HY 1 1 1/8

Sucker Rod(in)

57
 Sucker Rod Blowout Preventer
is used to prevent oil and gas
from leaking, and ensure washing
wells and etc. go on smoothly.Its
max working pressure is 1500psi
and it is used for 1/2 to 11/8 inch
sucker rod.

58
Type QW drill pipe Pneumatic slips is
designed to automatically grip drill
pipe during trip operation and to wipe
the drill pipe when making a pull.
It is a ideal wellhead tool suitable for
all types of rotary tables, and has
following characters: simple
installation; easy operation, multiple
functions; high automation, labor
saving and greatly improves the
efficiency of drilling operation.

59
Quickly casing
protector is used to
protect the screw
thread of casings by
easy operation during
usage.

60
Hook Blocks are hoisting tools
in oil and gas fields.They are
mainly used to handle drill
pipes, casings and replace
bits.They also can be used to
obviate accidents when they
are blocked.They are
designed and manufactured
according to API Spec 8A/8C
Specification for drilling and
production hoisting equipment.

61
Swivels Type SL are
necessary hoisting tools
for hanging drill pipes and
jointing hoses in well
repairing. There are type
SL35, SL60, SL90 and
SL135. They are
designed and
manufactured according
to API Spec 8A/8C
Specification for drilling
and production hoisting
equipment.

62
 ZQ钻杆动力钳是一种理想的石油钻井
井口工具，广泛适用于海洋、陆地钻
井、修井作业时上卸管柱丝扣作业。
该系列动力钳为开口型，能自由脱开
管柱，机动性强;集扭矩钳和旋扣钳于
一体，上卸扣替代猫头、吊钳和旋绳。
动力钳按API SPEC7K《钻井和修井设
备》设计、制造。


ZQ drill pipe powertongs is an ideal

well head tool for oil well,and widely
applied for making-up and breaking-
out in offshore and onshore drilling
operations and workover
operations.Open-throat design of the
ZQ series allows the tongs to escape
from drilling pipe freely with high
mobility. The tong is a combination of
spinning tong and torque tong. It
substitutes cathead, manual tong and
rotary rope in making-up and
breaking- out.
The tongs are design and
manufactured according API SPEC 7k
"Driling and Well serving Equinmen.

63
64
65
TQ系列套管动力钳广泛适用于石油矿场下套管作
业中套管或管子的上卸扣，具有结构轻巧、作业效
率高、工作安全可靠等优点，可大大降低工人的劳
动强度，提高管柱螺纹的连接质量。钳头系开口型，
采用先进的摆动式双颚板钳头，确保夹紧可靠。可
配备扭矩仪，作业中对压力、扭矩、圈数实行计算
机监控和管理。动力钳按 API SPEC7K《钻井和修
井设备》设计、制造。



TQ series of casing power tongs are widely
applied to making-up operations and breaking-out
operations of casings or pipes in oilfield.It has the
features such as light and handy structure, high
work efficiency and reliable working safety.It can
reduce workers' labor intensity and improve the
connection qualityof casing screw threads. Tong
head is design as open and equipped with
advanced swing-type double jaw assembly, which
can ensure reliable clamping.This series of casing
tongs can be configured with torque device to
perform computer monitoring and managing on
pressure, torque,and rounds.The power tongs are
design and manufactured according to API SPEC
7K"Driling and Well Serving Equipment."

66
67
（F）YZB系列液压动力站是为陆地和
海上石油矿场钻井机械提供液压动力源，
该产品具有调节范围广、调节方便、通
用性强等优点。风冷系列组合液压站，
尤其适用于沙漠高温地区以及连续工作
工况，具有结构紧凑、易于操作、调节
范围大、散热、加热功能齐全等特点。


(F)YZB series of hydraulic power
station are used to supply hydraulic
power for onshore and offshore drilling
operations. This kind of product has
the advantage of wide adjustment
range,easy operation, and high
generality. Series of air cooled
hydraulic power station especially are
suitable for desert and for continuous
working situation.The product features
compact structure,easy operation,
wide adjustable range,good heating or
radiating etc.


68
69
www.strong-oil.com
www.ntstrong.com 70
www.strong-oil.com
www.ntstrong.com