2020 Time Delay Catalog 05 18 20

time delay relays
catalog of products
800.238.7474 | www.macromatic.com | [email protected]

PRODUCT SUMMARY
Macromatic offers a wide variety of time delay relays and • SPDT or DPDT relay outputs and solid state outputs
accessories. Each one has different features and operating • Analog or digital-set
characteristics, allowing you to choose the exact product to meet • Multiple mounting configurations are available:
your needs. • 2” x 2” Encapsulated • Plug-in, 8 & 11 Pin Socket
• Programmable or non-programmable versions • 1/16 DIN • 17.5mm
• Single or multiple function
Time Delay
Input
Product Series Refer to: Setting & Functions Output Mounting
Voltages
Ranges
12VDC,
Analog-Set
THR-1 Series Pages Single- 24VAC/DC, 10A SPDT
0.1 SEC - 100
Relay Output 3-9 Function 120VAC/DC, Relay
HR
240VAC
Analog-Set
THR-3 Relay Pages Multi-Function 10A SPDT
0.1 SEC - 100 24-240VAC,
Output 10-11 (4) Relay
MIN 12-125VDC 2” x 2”
Encapsulated
THS-1 Series Analog-Set Panel
Pages Single- 24-240VAC, 1A SPNO
Solid State 0.01 SEC - 100 Mounted
12-15 Function 12-48VDC Solid State
Output HR with
time delay relays
THL-1 Series One Screw

Analog-Set 24-240VAC
Solid State Pages Single- 1A SPNO
0.01 SEC - 100 & 12-48VDC
Inline (Series) 16-17 Function Solid State
HR
Output
THL-8 Series
Digital-Set 24-240VAC
Solid State Pages Single- 1A SPNO
0.1 SEC - & 12-48VDC
Inline (Series) 18-19 Function Solid State
10,230 SEC
Output
12VDC,
Analog-Set 10A DPDT
TR-5 Series Pages Single- 24VAC/DC,
0.05 SEC - 2 10A SPDT
Standard 20-25 Function 120VAC/DC,
HR Relay
240VAC
TR-6 Series Analog-Set
24-240VAC 10A DPDT Plug-in
Time Ranger Pages Multi-Range Multi-
& Relay Utilizing
Programmable 26-33 0.05 SEC - 100 Function
12-125VDC Industry-
HR
Standard
TD-8 Series Digital-Set 12VAC/DC, 10A DPDT 8 & 11
Multi-Function
Time Ranger Pages Multi-Range 24VAC/DC, 10A SPDT Pin
(16) & Single-
Digital-Set 34-36 0.1 SEC - 120VAC/DC, Relay Sockets
Function
Programmable 1,023 HR 240VAC
TD-7 Series Digital-Set 12VAC/DC, 10A DPDT
Multi-Function
Time Ranger Pages Multi-Range 24VAC/DC, 10A SPDT
(10) & Single-
Digital-Set 37-39 0.05 SEC - 120VAC/DC, Relay
Function
Programmable 999 HR 240VAC
Digital-Set 24-240VAC
TAD Series Multi-Function
Pages Multi-Range & 5A SPDT
Digital-Set (10)
40-41 0.01 SEC - 24-240VDC Relay
1/16 DIN
9,990 HR
1/16 DIN
5A DPDT & (48mm2)
Analog-Set 100-240VAC
TAA Series Multi-Function SPDT Timed
Pages Multi-Range &
Analog-Set (6)-2 Versions & SPDT
42-43 0.05 SEC - 24-240VDC
1/16 DIN Instantaneous
100 HR
Relay
Analog-Set 15A SPDT

TE-881 Series Pages Multi-Function 12-240V
0.1 SEC - 10 & DPDT 17.5mm
Programmable 44-45 (10) AC/DC
DAYS Relay
2 800.238.7474 | www.macromatic.com | [email protected]

ON DELAY, INTERVAL, FLASHER, CYCLE & DELAYED INTERVAL
Relay Output | THR-1 Series
Isolated Relay Common

INPUT CATALOG
FUNCTION  VOLTAGE NUMBER ** WIRING
ON DELAY 120V AC/DC THR-10262-** Onboard Adjustable or
12V DC THR-10266-** Fixed Time Delay
24V AC/DC THR-10268-**
240V AC THR-10261-**
INTERVAL ON 120V AC/DC THR-10562-**
12V DC THR-10566-**
time delay relays | encapsulated

24V AC/DC THR-10568-**
240V AC THR-10561-**  Cost effective design &
FLASHER 120V AC/DC THR-10862-** compact 2” x 2” enclosure
(OFF Time 1st) 12V DC THR-10866-** are ideal for volume OEM
24V AC/DC THR-10868-** applications
240V AC THR-10861-** DIAGRAM 300  Microprocessor-based design
FLASHER 120V AC/DC THR-10962-** for greater performance &
(ON Time 1st) 12V DC THR-10966-** Remote Time Delay maximum flexibility
24V AC/DC THR-10968-**
 Encapsulated for protection
240V AC THR-10961-**
against harsh environments
REPEAT CYCLE * 120V AC/DC THR-13162-**
(OFF Time 1st) 12V DC THR-13166-**  10A SPDT relay output contacts
24V AC/DC THR-13168-** can handle most pilot duty &
240V AC THR-13161-** fractional HP loads
REPEAT CYCLE * 120V AC/DC THR-15162-**  Onboard & remote adjustable
(ON Time 1st) 12V DC THR-15166-** or fixed time delays from 0.05
24V AC/DC THR-15168-** seconds to 100 hours
240V AC THR-15161-** DIAGRAM 302

DELAYED 120V AC/DC THR-16162-**
INTERVAL * 12V DC THR-16166-**
24V AC/DC THR-16168-**
240V AC THR-16161-**
 See “Definitions of Timing Functions”.
* ON & OFF Time Ranges for these functions are the same. See
www.macromatic.com/onoff for information on how to order a unit with
different ON & OFF time ranges.
** Complete Product Number using two-digit Code from Table below.
Time Delays
THR-1 Series Products have three time delay options:
 Onboard Adjustable Time Delay--complete
Product Number by adding two-digit Code from
Table at right, i.e., THR-10262-30 is an On Delay
with a time delay range of 0.1-10 seconds. * See ** TIMING RANGE TABLE
www.macromatic.com/onoff for information on Time Delay Range Code
how to order these functions with different ON & 0.05 - 5 Sec. 04
OFF time ranges. 0.1 - 10 Sec. 30
 Onboard Fixed Time Delay--replace two-digit 1 - 100 Sec. 31
Code with suffix “F” followed by delay [0.1 ... 10 - 1,000 Sec. 36
0.1 - 10 Min. 32
100] followed by (S) seconds, (M) minutes or (H)
1 - 100 Min. 33
hours, i.e., THR-10262-F5S is an On Delay with a 10 - 1,000 Min. 37
time delay fixed at 5 seconds. 1 - 100 Hr. 35
 Remote Time Delay--THR-1 Series products can
be built with two terminals for remote adjustable
800.238.7474
or fixed time delays. www.macromatic.com
Build your Time Delay Relays with the Online Product Builder [email protected]
3
Relay Common Internally Connected to Pin 2
INPUT CATALOG
ON DELAY 120V AC/DC THR-10262-**J Onboard Adjustable or
12V DC THR-10266-**J Fixed Time Delay
24V AC/DC THR-10268-**J
240V AC THR-10261-**J
INTERVAL ON 120V AC/DC THR-10562-**J
12V DC THR-10566-**J
24V AC/DC THR-10568-**J

 Cost effective design & 240V AC THR-10561-**J
compact 2” x 2” enclosure
FLASHER 120V AC/DC THR-10862-**J
are ideal for volume OEM
(OFF Time 1st) 12V DC THR-10866-**J
applications
24V AC/DC THR-10868-**J
 Microprocessor-based design 240V AC THR-10861-**J DIAGRAM 301
for greater performance & FLASHER 120V AC/DC THR-10962-**J Remote Time Delay
maximum flexibility (ON Time 1st) 12V DC THR-10966-**J
 Encapsulated for protection 24V AC/DC THR-10968-**J
against harsh environments 240V AC THR-10961-**J
REPEAT CYCLE * 120V AC/DC THR-13162-**J
 10A SPDT relay output contacts
(OFF Time 1st) 12V DC THR-13166-**J
can handle most pilot duty &
24V AC/DC THR-13168-**J
fractional HP loads
240V AC THR-13161-**J
 Relay Common internally REPEAT CYCLE * 120V AC/DC THR-15162-**J
connected to Pin 2-makes (ON Time 1st) 12V DC THR-15166-**J
wiring easier 24V AC/DC THR-15168-**J
 Onboard & remote adjustable 240V AC THR-15161-**J DIAGRAM 303
or fixed time delays from 0.05 DELAYED 120V AC/DC THR-16162-**J
seconds to 100 hours INTERVAL * 12V DC THR-16166-**J
24V AC/DC THR-16168-**J

240V AC THR-16161-**J
Time Delays
Table at right, i.e., THR-10262-30J is an On ** TIMING RANGE TABLE
Delay with a time delay range of 0.1-10 seconds. Time Delay Range Code
* See www.macromatic.com/onoff for informa- 0.05 - 5 Sec. 04
tion on how to order these functions with different 0.1 - 10 Sec. 30
ON & OFF time ranges. 1 - 100 Sec. 31
10 - 1,000 Sec. 36
 Onboard Fixed Time Delay--replace two-digit
0.1 - 10 Min. 32
Code with suffix “F” followed by delay [0.1 ... 1 - 100 Min. 33
100] followed by (S) seconds, (M) minutes or (H) 10 - 1,000 Min. 37
hours, i.e., THR-10262-F5SJ is an On Delay with 1 - 100 Hr. 35
a time delay fixed at 5 seconds.
800.238.7474  Remote Adjustable Time Delay--THR-1 Series
products can be built with two terminals for
www.macromatic.com remote adjustable or fixed time delays.
[email protected] Build your Time Delay Relays with the Online Product Builder
4
OFF DELAY, SINGLE SHOT, WATCHDOG, SINGLE SHOT FALLING
EDGE, ON DELAY/OFF DELAY & DELAYED INTERVAL
Isolated Control Switch & Isolated Relay Common
INPUT CATALOG
OFF DELAY 120V AC/DC THR-11662-** Onboard Adjustable or
12V DC THR-11666-** Fixed Time Delay
24V AC/DC THR-11668-**
240V AC THR-11661-**
SINGLE SHOT 120V AC/DC THR-11562-**

12V DC THR-11566-**
24V AC/DC THR-11568-**  Cost effective design &
240V AC THR-11561-** compact 2” x 2” enclosure
WATCHDOG 120V AC/DC THR-11362-** are ideal for volume OEM
(Retriggerable 12V DC THR-11366-** applications
Single Shot) 24V AC/DC THR-11368-**  Microprocessor-based design
240V AC THR-11361-** DIAGRAM 304 for greater performance &
SINGLE SHOT 120V AC/DC THR-12262-** Remote Time Delay maximum flexibility
FALLING EDGE 12V DC THR-12266-**  Encapsulated for protection
(Retriggerable) 24V AC/DC THR-12268-** against harsh environments
240V AC THR-12261-**
ON/OFF DELAY * 120V AC/DC THR-14162-**  10A SPDT relay output contacts
12V DC THR-14166-** can handle most pilot duty &
24V AC/DC THR-14168-** fractional HP loads
240V AC THR-14161-**  Onboard & remote adjustable
DELAYED 120V AC/DC THR-16562-** or fixed time delays from 0.05
INTERVAL * 12V DC THR-16566-** seconds to 100 hours
(Triggered) 24V AC/DC THR-16568-**
240V AC THR-16561-** DIAGRAM 306

Time Delays
 Onboard Adjustable Time Delay--complete Product
Number by adding two-digit Code from Table at right,
i.e., THR-11662-30 is an Off Delay with a time delay ** TIMING RANGE TABLE
range of 0.1-10 seconds. Time Delay Range Code
* See www.macromatic.com/onoff for information 0.05 - 5 Sec. 04
on how to order these functions with different ON & 0.1 - 10 Sec. 30
OFF time ranges. 1 - 100 Sec. 31
 Onboard Fixed Time Delay--replace two-digit Code 10 - 1,000 Sec. 36
with suffix “F” followed by delay [0.1 ... 100] followed 0.1 - 10 Min. 32
by (S) seconds, (M) minutes or (H) hours, i.e., THR- 1 - 100 Min. 33
11662-F5S is an Off Delay with a time delay fixed at 10 - 1,000 Min. 37
5 seconds. 1 - 100 Hr. 35

 Remote Adjustable Time Delay--THR-1 Series
products can be built with two terminals for remote 800.238.7474
adjustable or fixed time delays. www.macromatic.com
5
Isolated Control Switch & Relay Common Internally Connected to Pin 2
INPUT CATALOG
OFF DELAY 120V AC/DC THR-11662-**J Onboard Adjustable or
12V DC THR-11666-**J Fixed Time Delay
24V AC/DC THR-11668-**J
240V AC THR-11661-**J
SINGLE SHOT 120V AC/DC THR-11562-**J
12V DC THR-11566-**J
 Cost effective design & 24V AC/DC THR-11568-**J

compact 2” x 2” enclosure 240V AC THR-11561-**J
are ideal for volume OEM WATCHDOG 120V AC/DC THR-11362-**J
applications (Retriggerable 12V DC THR-11366-**J
 Microprocessor-based design Single Shot) 24V AC/DC THR-11368-**J
for greater performance & 240V AC THR-11361-**J DIAGRAM 305
maximum flexibility SINGLE SHOT 120V AC/DC THR-12262-**J Remote Time Delay
FALLING EDGE 12V DC THR-12266-**J
(Retriggerable) 24V AC/DC THR-12268-**J
240V AC THR-12261-**J
 10A SPDT relay output contacts ON/OFF DELAY * 120V AC/DC THR-14162-**J
can handle most pilot duty & 12V DC THR-14166-**J
fractional HP loads 24V AC/DC THR-14168-**J
 Relay Common internally 240V AC THR-14161-**J
connected to Pin 2-makes DELAYED 120V AC/DC THR-16562-**J
wiring easier INTERVAL * 12V DC THR-16566-**J
(Triggered) 24V AC/DC THR-16568-**J
 Onboard & remote adjustable
240V AC THR-16561-**J DIAGRAM 307
or fixed time delays from 0.05
seconds to 100 hours  See “Definitions of Timing Functions”.
Time Delays
i.e., THR-11662-30J is an Off Delay with a time delay ** TIMING RANGE TABLE
range of 0.1-10 seconds. Time Delay Range Code
* See www.macromatic.com/onoff for information 0.05 - 5 Sec. 04
on how to order these functions with different ON & 0.1 - 10 Sec. 30
10 - 1,000 Sec. 36
 Onboard Fixed Time Delay--replace two-digit Code
0.1 - 10 Min. 32
with suffix “F” followed by delay [0.1 ... 100] followed 1 - 100 Min. 33
by (S) seconds, (M) minutes or (H) hours, i.e., THR- 10 - 1,000 Min. 37
11662-F5SJ is an Off Delay with a time delay fixed at 1 - 100 Hr. 35
5 seconds.
800.238.7474  Remote Adjustable Time Delay--THR-1 Series
products can be built with two terminals for remote
www.macromatic.com adjustable or fixed time delays.
6
Control Switch Common to Pin 2 & Isolated Relay Common
INPUT CATALOG
OFF DELAY 120V AC/DC THR-11662-**T Onboard Adjustable or
12V DC THR-11666-**T Fixed Time Delay
24V AC/DC THR-11668-**T
240V AC THR-11661-**T
SINGLE SHOT 120V AC/DC THR-11562-**T

12V DC THR-11566-**T
24V AC/DC THR-11568-**T  Cost effective design &
240V AC THR-11561-**T compact 2” x 2” enclosure
WATCHDOG 120V AC/DC THR-11362-**T are ideal for volume OEM
(Retriggerable 12V DC THR-11366-**T applications
Single Shot) 24V AC/DC THR-11368-**T  Microprocessor-based design
240V AC THR-11361-**T DIAGRAM 308
for greater performance &
SINGLE SHOT 120V AC/DC THR-12262-**T Remote Time Delay maximum flexibility
FALLING EDGE 12V DC THR-12266-**T
(Retriggerable) 24V AC/DC THR-12268-**T  Encapsulated for protection
240V AC THR-12261-**T against harsh environments
ON/OFF DELAY * 120V AC/DC THR-14162-**T  10A SPDT relay output contacts
12V DC THR-14166-**T can handle most pilot duty &
24V AC/DC THR-14168-**T fractional HP loads
240V AC THR-14161-**T  Onboard & remote adjustable
DELAYED 120V AC/DC THR-16562-**T or fixed time delays from 0.05
INTERVAL * 12V DC THR-16566-**T seconds to 100 hours
(Triggered) 24V AC/DC THR-16568-**T
240V AC THR-16561-**T DIAGRAM 310

Time Delays
Table at right, i.e., THR-11662-30T is an Off Delay
** TIMING RANGE TABLE
with a time delay range of 0.1-10 seconds. * See
www.macromatic.com/onoff for information on Time Delay Range Code
1 - 100 Sec. 31
 Onboard Fixed Time Delay--replace two-digit 10 - 1,000 Sec. 36
Code with suffix “F” followed by delay [0.1 ... 100] 0.1 - 10 Min. 32
followed by (S) seconds, (M) minutes or (H) hours, 1 - 100 Min. 33
i.e., THR-11662-F5ST is an Off Delay with a time 10 - 1,000 Min. 37
delay fixed at 5 seconds. 1 - 100 Hr. 35
products can be built with two terminals for remote 800.238.7474
adjustable or fixed time delays. www.macromatic.com
7
Control Switch Common to Pin 2 &
Relay Common Internally Connected to Pin 2
INPUT CATALOG
OFF DELAY 120V AC/DC THR-11662-**JT Onboard Adjustable or
12V DC THR-11666-**JT Fixed Time Delay
24V AC/DC THR-11668-**JT
240V AC THR-11661-**JT
SINGLE SHOT 120V AC/DC THR-11562-**JT
12V DC THR-11566-**JT
 Cost effective design & 24V AC/DC THR-11568-**JT
compact 2” x 2” enclosure 240V AC THR-11561-**JT
applications WATCHDOG 120V AC/DC THR-11362-**JT
(Retriggerable 12V DC THR-11366-**JT
 Microprocessor-based design Single Shot) 24V AC/DC THR-11368-**JT
for greater performance & 240V AC THR-11361-**JT DIAGRAM 309
maximum flexibility
SINGLE SHOT 120V AC/DC THR-12262-**JT
 Encapsulated for protection FALLING EDGE 12V DC THR-12266-**JT Remote Time Delay
against harsh environments (Retriggerable) 24V AC/DC THR-12268-**JT
240V AC THR-12261-**JT
 10A SPDT relay output contacts
can handle most pilot duty & ON/OFF DELAY * 120V AC/DC THR-14162-**JT
fractional HP loads 12V DC THR-14166-**JT
24V AC/DC THR-14168-**JT
 Relay Common internally 240V AC THR-14161-**JT
connected to Pin 2-makes
DELAYED 120V AC/DC THR-16562-**JT
wiring easier
INTERVAL * 12V DC THR-16566-**JT
 Onboard & remote adjustable (Triggered) 24V AC/DC THR-16568-**JT
or fixed time delays from 0.05 240V AC THR-16561-**JT DIAGRAM 311
seconds to 100 hours  See “Definitions of Timing Functions”.
Time Delays
i.e., THR-11662-30JT is an Off Delay with a time
delay range of 0.1-10 seconds. ** TIMING RANGE TABLE
* See www.macromatic.com/onoff for information Time Delay Range Code
0.05 - 5 Sec. 04
on how to order these functions with different ON &
0.1 - 10 Sec. 30
OFF time ranges.
1 - 100 Sec. 31
 Onboard Fixed Time Delay--replace two-digit Code 10 - 1,000 Sec. 36
with suffix “F” followed by delay [0.1 ... 100] followed 0.1 - 10 Min. 32
by (S) seconds, (M) minutes or (H) hours, i.e., THR- 1 - 100 Min. 33
11662-F5SJT is an Off Delay with a time delay fixed 10 - 1,000 Min. 37
at 5 seconds. 1 - 100 Hr. 35
800.238.7474 products can be built with two terminals for remote
adjustable or fixed time delays.
www.macromatic.com
8
THR-1 SERIES
Relay Output
Application Data
Voltage Tolerance: Temperature:
AC Operation: +10/-15% of nominal at 50/60 Hz Operate: -28o to 65oC (-18o to 149oF)
DC Operation: +10/-15% of nominal Storage: -45o to 85oC (-49o to 185oF)
Load (Burden): Maximum of 2 VA for all voltages Output Contacts:
10A @ 240VAC / 7A @ 28VDC SPDT, ¼hp @ 120VAC (N.O.)
Setting Accuracy:
Maximum Setting (Adjustable): +5%, -0% Life:
Minimum Setting (Adjustable): +0%, -50% Mechanical: 10,000,000 operations

Fixed Time Delay: +2% or 50ms, whichever is greater Full Load: 100,000 operations
Repeat Accuracy (constant voltage and temperature): Compatibility:
+0.1% or + 0.04 seconds, whichever is greater Using a solid state switch to initiate the time sequence is acceptable.
See www.macromatic.com/leakage or contact Macromatic for
Reset Time:
information regarding leakage current limits and other solid state design
Triggered with Input Voltage: 100ms considerations.
Triggered with Control Switch: 40ms
Mounting:
Start-up Time (Time from when power is applied until unit is
Surface with one #8 or #10 screw and a maximum tightening torque of 15
timing): 0.05 Seconds
in-lbs.
Maintain Function Time (Time unit continues to operate after Termination:
power is removed): 0.01 Seconds
0.25” male quick-connect terminals
Units Triggered by a Control Switch: Approvals:
Minimum required trigger switch closure time is 50ms.
File #E109466
Dimensions Remote Time Delay

Most THR-1 Series products can be built with two terminals for
remote adjustable or fixed time delays. To order a product with a
remote time delay, complete the Product Number by adding the
two-digit Code from the Table shown on the appropriate product
selection page followed by the suffix “R1”, i.e., THR-10262-30R1.
Contact Macromatic for information on limitations of remote time
delays on functions with ON & OFF timing ranges.
Adjustable Time Delay

A 100K ohm potentiometer is required to obtain the maximum
time delay for all standard ranges. To use other values of remote
potentiometers, contact Macromatic.
Fixed Time Delay

A fixed time delay can be set by connecting a resistor across the
two terminals. To determine the resistor value required, use the
following equation:
T R = Resistance value required to obtain T
R= x 100,000 T = Desired time delay
Tmax
Tmax = Maximum time delay of range
All Dimensions in
Inches (Millimeters) Example: Using time range 0.1-10 seconds, what resistor value is
required for a fixed time delay of 5 seconds:
R= 5 x 100,000 = 50,000 ohms (50K ohms)

10
800.238.7474 | www.macromatic.com | [email protected] 9

PROGRAMMABLE
MULTI-FUNCTION | MULTI-TIME RANGE | MULTI-VOLTAGE
The THR-3 Series products are designed to replace thousands of products from
Macromatic and many other manufacturers with just three Catalog Numbers.
Each comes with four functions and four timing ranges covering 0.1 second to 100
minutes (1,000 minutes on THR-3856U dual time unit). On the same unit, choose
between onboard adjustable, onboard fixed and remote adjustable time delay set-
ting (remote time delay not available on THR-3856U). All set up is done with DIP
switches for ease of use. A universal input voltage of 24-240V AC and 12-125V
DC adds to the ultimate flexibility of these products. All products are encapsulated
for protection against harsh elements. A 10A SPDT relay output rating can handle
most pilot duty and fractional HP loads.
 Three Catalog Numbers Offer FUNCTIONS INPUT CATALOG

All These Features: (4 in each Product) VOLTAGE NUMBER WIRING
 Multi-Function: 4 common  ON DELAY 24-240V AC THR-3816U
time delay functions in each  OFF DELAY &
one  INTERVAL 12-125V DC
 SINGLE SHOT
 Universal Voltage: 24-
240VAC & 12-125VDC
 Time Ranges: 0.1 Sec to 100  FLASHER OFF 24-240V AC THR-3836U
Minutes (1,000 Minutes on  FLASHER ON &
Dual Time product)  WATCHDOG 12-125V DC
 SINGLE SHOT
 Onboard & remote adjust of FALLING EDGE Diagram 348
time delay (remote adjust not
offered on THR-3856U)
 THR-3856U allows different  REPEAT CYCLE OFF 24-240V AC THR-3856U *
ON & OFF times  REPEAT CYCLE ON &
 Cost effective design &  DELAYED INTERVAL 12-125V DC
compact 2” x 2” enclosure  DELAYED INTERVAL
(TRIGGERED)
 10A SPDT relay output contacts Diagram 352
can handle most pilot duty &
fractional HP loads Some functions require the use of a Trigger to initiate the unit.
See Macromatic Catalog or www.macromatic.com/functions
for definitions & explanations of Timing Functions.
* The THR-3856U has independently selectable & adjustable ON & OFF times.
Time Delays
THR-3 Series Products have three time delay options (two for THR-3856U dual-time
product):
 Onboard Adjustable Time Delay-after selecting the desired time range, use the
top-mounted potentiometer provided with the unit to adjust within that range (The
THR-3856U has independently selectable & adjustable ON & OFF times).
 Onboard Fixed Time Delay-although these units come with an onboard
potentiometer, they can be used to replace products with fixed time delays. After
selecting the desired time range, set the top-mounted potentiometer at the fixed
delay required (epoxy can be applied to prevent further changes if desired).
 Remote Time Delay (THR-3816U & THR-3836U only)-after selecting the
desired time range & setting up the unit for remote time delay adjustment,
connect a remote potentiometer for remote adjustability or a resistor for fixed
time delay. Note that these products will only work with 100K, 1M or 2M remote
800.238.7474 potentiometers or resistors.
www.macromatic.com
10
PROGRAMMABLE
MULTI-FUNCTION | MULTI-TIME RANGE | MULTI-VOLTAGE
Application Data
Voltage Tolerance: Temperature: Operating: -28o to 65oC (-18o to 149oF)
AC Operation: +10/-15% of nominal at 50/60 Hz Storage: -40o to 85oC (-40o to 185oF)
DC Operation: +10/-15% of nominal
Output Contacts:
Load (Burden): Maximum of 2 VA for all voltages 10A @ 240VAC / 7A @ 28VDC SPDT, ¼hp @ 120VAC (N.O.)
Setting Accuracy: Life:
Maximum Setting (Adjustable): +5%, -0% Mechanical: 10,000,000 operations
Minimum Setting (Adjustable): +0%, -50%

Full Load: 100,000 operations
Reset Time: See www.macromatic.com/leakage or contact Macromatic for
information regarding leakage current limits and other solid state
Triggered with Input Voltage: 100ms
design considerations.
Triggered with Control Switch: 40ms
Mounting:
Start-up Time (Time from when power is applied until unit is timing):
0.05 Seconds Surface with one #8 or #10 screw and a maximum tightening torque of
15 in-lbs.
Maintain Function Time (Time unit continues to operate after
Termination:
power is removed): 0.01 Seconds
Units Triggered by a Control Switch:
Approvals:
File #E109466
Dimensions
All Dimensions in
Inches (Millimeters)

Solid State Output | THS-1 Series
INPUT CATALOG
FUNCTION  VOLTAGE NUMBER ** WIRING v
ON DELAY p 24-240V AC THS-1024A-** Onboard Adjustable or
12-125V DC THS-1024D-** Fixed Time Delay

INTERVAL ON 24-240V AC THS-1054A-**
12-125V DC THS-1054D-**


 Cost effective design &
compact 2” x 2” enclosure FLASHER 24-240V AC THS-1094A-**
are ideal for volume OEM (ON Time 1st) 12-125V DC THS-1094D-**
applications DIAGRAM 317
 Microprocessor-based design
maximum flexibility REPEAT CYCLE * 24-240V AC THS-1314A-** Remote Time Delay
(OFF Time 1st) 12-125V DC THS-1314D-**
 Output rated 1A continuous/10A
inrush is perfect for high duty REPEAT CYCLE * 24-240V AC THS-1514A-**
cycle/long life applications (ON Time 1st) 12-125V DC THS-1514D-**

seconds to 100 hours DELAYED 24-240V AC THS-1614A-**
 Built-in load suppression INTERVAL * 12-125V DC THS-1614D-**
eliminates need for separate
protection DIAGRAM 320
 Pilot duty rating  See “Definitions of Timing Functions”.

p See Inline (Series-Connection) On Delay.
v Diagrams shown are for products with AC input voltage. For products with DC
input voltage, the “+” terminal is 2 & the “-” terminal is 3.
Time Delays
THS-1 Series Products have three time delay options:
Table at right, i.e., THS-1054A-30 is an Interval On ** TIMING RANGE TABLE
Time Delay Range Code
www.macromatic.com/onoff for information on
0.01 - 1 Sec. 02
how to order these functions with different ON &
0.05 - 5 Sec. 04
 Onboard Fixed Time Delay--replace two-digit 1 - 100 Sec. 31
Code with suffix “F” followed by delay [0.1 ... 100] 10 - 1,000 Sec. 36
followed by (S) seconds, (M) minutes or (H) hours, 0.1 - 10 Min. 32
i.e., THS-1054A-F5S is an Interval On with a time 1 - 100 Min. 33
delay fixed at 5 seconds. 10 - 1,000 Min. 37
 Remote Time Delay--THS-1 Series products can 1 - 100 Hr. 35
800.238.7474 be built with two terminals for remote adjustable or
fixed time delays.
www.macromatic.com
12
Solid State Output | THS-1 Series
Isolated Control Switch
INPUT CATALOG
OFF DELAY 24-240V AC THS-1164A-** Onboard Adjustable or
12-125V DC THS-1164D-** Fixed Time Delay

SINGLE SHOT 24-240V AC THS-1154A-**

12-125V DC THS-1154D-**
WATCHDOG 24-240V AC THS-1134A-** applications
(Retriggerable 12-125V DC THS-1134D-**
Single Shot) DIAGRAM 318  Microprocessor-based design
maximum flexibility
SINGLE SHOT 24-240V AC THS-1224A-** Remote Time Delay  Encapsulated for protection
FALLING EDGE 12-125V DC THS-1224D-** against harsh environments
(Retriggerable)
inrush is perfect for high duty
ON/OFF DELAY * 24-240V AC THS-1414A-** cycle/long life applications
12-125V DC THS-1414D-**  Onboard & remote adjustable
seconds to 100 hours

DELAYED 24-240V AC THS-1654A-**  Built-in load suppression
INTERVAL * 12-125V DC THS-1654D-** eliminates need for separate
(Retriggerable) DIAGRAM 321 protection
 Pilot duty rating
Time Delays
Product Number by adding two-digit Code from ** TIMING RANGE TABLE
Table at right, i.e., THS-1164A-30 is an Off Delay
0.01 - 1 Sec. 02
www.macromatic.com/onoff for information on
0.05 - 5 Sec. 04
how to order these functions with different ON &
0.1 - 10 Sec. 30
 Onboard Fixed Time Delay--replace two-digit 10 - 1,000 Sec. 36
Code with suffix “F” followed by delay [0.1 ... 0.1 - 10 Min. 32
100] followed by (S) seconds, (M) minutes or (H) 1 - 100 Min. 33
hours, i.e., THS-1164A-F5S is an Off Delay with a 10 - 1,000 Min. 37
time delay fixed at 5 seconds. 1 - 100 Hr. 35
 Remote Time Delay--THS-1 Series products can
be built with two terminals for remote adjustable 800.238.7474
or fixed time delays. www.macromatic.com
13
SOLID STATE OUTPUT | THS-1 SERIES
Control Switch Common to Pin 2
INPUT CATALOG
OFF DELAY 24-240V AC THS-1164A-**T Onboard Adjustable or
12-125V DC THS-1164D-**T Fixed Time Delay

SINGLE SHOT 24-240V AC THS-1154A-**T
12-125V DC THS-1154D-**T

applications WATCHDOG 24-240V AC THS-1134A-**T
(Retriggerable 12-125V DC THS-1134D-**T
 Microprocessor-based design Single Shot) DIAGRAM 319
maximum flexibility
 Encapsulated for protection SINGLE SHOT 24-240V AC THS-1224A-**T Remote Time Delay
against harsh environments FALLING EDGE 12-125V DC THS-1224D-**T
(Retriggerable)
inrush is perfect for high duty
cycle/long life applications ON/OFF DELAY * 24-240V AC THS-1414A-**T
 Onboard & remote adjustable 12-125V DC THS-1414D-**T

 Built-in load suppression DELAYED 24-240V AC THS-1654A-**T
eliminates need for separate INTERVAL * 12-125V DC THS-1654D-**T
protection (Retriggerable) DIAGRAM 322
Time Delays
Table at right, i.e., THS-1164A-30T is an Off Delay ** TIMING RANGE TABLE
with a time delay range of 0.1-10 seconds. * See Time Delay Range Code
www.macromatic.com/onoff for information on 0.01 - 1 Sec. 02
1 - 100 Sec. 31
 Onboard Fixed Time Delay--replace two-digit
10 - 1,000 Sec. 36
Code with suffix “F” followed by delay [0.1 ... 100] 0.1 - 10 Min. 32
followed by (S) seconds, (M) minutes or (H) hours, 1 - 100 Min. 33
i.e., THS-1164A-F5ST is an Off Delay with a time 10 - 1,000 Min. 37
delay fixed at 5 seconds. 1 - 100 Hr. 35
 Remote Time Delay--THS-1 Series products can
800.238.7474 be built with two terminals for remote adjustable or
fixed time delays.
www.macromatic.com
14
THS-1 SERIES
Solid State Output
Application Data Temperature: Operating: -28o to 65oC (-18o to 149oF)

Voltage Tolerance:
AC Operation: +10 to -15% of nominal voltage, 50/60 Hz Storage: -40o to 85oC (-40o to 185oF)
DC Operation: +10 to -15% of nominal voltage Output Contacts:
Normally Open Solid State 1A Continuous, 10A Inrush @ 65o C, Pilot Duty
Load (Burden): Maximum of 1VA for all voltages

No predictable failure if used within operating parameters.
Maximum Setting (Adjustable): +5%, -0%
Minimum Setting (Adjustable): +0%, -50% Leakage Current (OFF-State): < 5ma @ 240V AC

Fixed Time Delay: +2% or 50ms, whichever is greater
Minimum Load Current: 20ma
Repeat Accuracy (constant voltage and temperature):
+0.1% or + 0.04 seconds, whichever is greater Effective Voltage Drop (ON-State): Maximum 1.6V @ 1A for all voltag-
es
Reset Time:
Triggered with Input Voltage: 50ms Compatibility:
Triggered with Control Switch: 40ms Using a solid state switch to initiate the time sequence is acceptable.
See www.macromatic.com/leakage or contact Macromatic for
Start-up Time:
(Time from when power is applied until unit is timing)
considerations.
0.05 Seconds
Mounting:
Maintain Function Time:
Surface with one #8 or #10 screw and a maximum tightening torque of
(Time unit continues to operate after power is removed) 15 in-lbs.
0.01 Seconds
Termination:
Units Triggered by a Control Switch:
Approvals:
File #E236146

THS-1 Series products can be built with two terminals for re-
mote adjustable or fixed time delays. To order a product with a
remote time delay, complete the Product Number by adding the
two-digit Code from the Table shown on the appropriate product
selection page followed by the suffix “R1”, i.e., THS-10242-
30R1.

time delay for all standard ranges. To use other values of re-
mote potentiometers, contact Macromatic.
Fixed Time Delay

following equation:

Tmax
All Dimensions in
Inches (Millimeters) Example: Using time range 0.1-10 seconds, what resistor value
is required for a fixed time delay of 5 seconds:
R= 5 x 100,000 = 50,000 ohms (50K ohms)

10

ON DELAY | INLINE (SERIES CONNECTION)
Solid State Output | Analog-Set | THL-1 Series
INPUT CATALOG
ON DELAY 24-240V AC & THL-1024U-** Onboard Adjustable or
12-48V DC Fixed Time Delay
 Universal input voltage:

24-240V AC & 12-48V DC
 Onboard & remote adjustable DIAGRAM 329
or fixed time delays from 0.01 Remote Time Delay
 Two-terminal series-connection
with the load
applications
maximum flexibility DIAGRAM 330
 Encapsulated for protection  See “Definitions of Timing Functions”.

against harsh environments ** Complete Product Number using two-digit Code from Table below.

inrush pilot duty is perfect
for high duty cycle/long life
applications
Time Delays
THL-1 Series Products have three time delay options:
 Onboard Adjustable Time Delay--complete Prod-
uct Number by adding two-digit Code from Table ** TIMING RANGE TABLE
at right, i.e., THL-1024U-30 is an On Delay with a Time Delay Range Code
time delay range of 0.1-10 seconds. 0.01 - 1 Sec. 02
 Onboard Fixed Time Delay--replace two-digit 0.05 - 5 Sec. 04
Code with suffix “F” followed by delay [0.1 ... 100] 0.1 - 10 Sec. 30
followed by (S) seconds, (M) minutes or (H) hours, 1 - 100 Sec. 31
10 - 1,000 Sec. 36
i.e., THL-1024U-F5S is an On Delay with a time 0.1 - 10 Min. 32
delay fixed at 5 seconds. 1 - 100 Min. 33
 Remote Time Delay--THL-1 Series products can 10 - 1,000 Min. 37
be built with two terminals for remote adjustable or 1 - 100 Hr. 35
fixed time delays.
800.238.7474
www.macromatic.com
16
Solid State Output | Analog-Set | THL-1 Series
Application Data
Voltage Tolerance: Output Contacts:
AC Operation: +10 to -15% of nominal voltage, 50/60 Hz Normally Open Solid State 1A Continuous, 10A Inrush @ 65o C, Pilot Duty
DC Operation: +10 to -15% of nominal voltage
Life:
Load (Burden): Maximum of 1 VA for all voltages No predictable failure if used within operating parameters.
Setting Accuracy: Leakage Current (OFF-State): < 5ma @ 240V AC
Maximum Setting (Adjustable): +5%, -0%
Minimum Setting (Adjustable): +0%, -50%

Fixed Time Delay: +2% or 50ms, whichever is greater Effective Voltage Drop (ON-State): Maximum 3V @ 1A for all voltages
Reset Time: 50ms See www.macromatic.com/leakage or contact Macromatic for
Start-up Time: considerations.
Mounting:
0.02 Seconds
Surface with one #8 or #10 screw and a maximum tightening torque of
Maintain Function Time: 15 in-lbs.
(Time unit continues to operate after power is removed)
Termination:
0.01 Seconds
Temperature: Operating: -28o to 65oC (-18o to 149oF) Approvals:

File #E236146
Storage: -40o to 85oC (-40o to 185oF)

THL-1 Series products can be built with two terminals for remote
adjustable or fixed time delays. To order a product with a remote
time delay, complete the Product Number by adding the two-digit
Code from the Table shown on the appropriate product selection
page followed by the suffix “R1”, i.e., THL-1024U-30R1.

time delay for all standard ranges. To use other values of remote
potentiometers, contact Macromatic.
Fixed Time Delay

following equation:
Tmax
Example: Using time range 0.1-10 seconds, what resistor value is

All Dimensions in required for a fixed time delay of 5 seconds:
R= 5 x 100,000 = 50,000 ohms (50K ohms)

10

Solid State Output | Dip-Switch Digital-Set | THL-8 Series
The THL-8 On Delay Inline (Series Connection) offers an easy and accurate method
to select any time delay. The THL-8 Series is a compact 2” x 2” encapsulated enclo-
sure with a universal input voltage. It is connected in series with the load requiring
only 2 terminals/connections.
Three time ranges are available: 0.1 – 102.3 seconds, 1 – 1,023 seconds and 10
– 10,230 seconds. Programming is accomplished through the use of a 10-position
DIP-switch. Each position is marked with a binary time increment. The required
delay is selected by moving the switch of each increment to the ON position and
adding their corresponding values (see examples below). This method provides a
greater setting accuracy than is found on other units with an analog potentiometer.
 Universal input voltage:
24-240V AC & 12-48V DC These products feature a universal input voltage of 24-240V AC and 12-48V DC.
The inline two-terminal output is rated 1A continuous/10A inrush pilot duty, and is
 DIP-switch for accurate digital- ideal for high duty cycle and long life applications. The enclosure is encapsulated for
set of any time delay from protection against harsh environments.
100ms to 10,230 seconds
 Two-terminal series-connection For similar products with choices of onboard and remote analog-set or fixed time
with the load delay, see the THL-1 Series.

INPUT CATALOG
applications ON DELAY 24-240V AC & THL-8024U-**
12-48V DC
maximum flexibility
inrush pilot duty is perfect
for high duty cycle/long life DIAGRAM 329
applications

Time Delays
**TIMING RANGE TABLE

COMPLETE PRODUCT NUMBER
USING TWO DIGIT CODE BELOW:
i.e., THL-8024U-40
ime Delay Range

T Code
0.1 - 102.3 Sec. 40
1 - 1,023 Sec. 41
10 - 10,230 Sec. 42
800.238.7474 COMBINE FOR TOTAL TIME IN SECONDS
www.macromatic.com
18
Solid State Output | Dip-Switch Digital-Set | THL-8 Series
Application Data
AC Operation: +10 to -15% of nominal voltage, 50/60 Hz +5% Storage: -40o to 85oC (-40o to 185oF)
DC Operation: +10 to -15% of nominal voltage
Output Contacts:
Load (Burden): Maximum of 1 VA for all voltages Normally Open Solid State 1A Continuous, 10A Inrush @ 65o C, Pilot Duty
Constant Voltage & Temperature w/i specifications: No predictable failure if used within operating parameters.
+2% of set time or +50ms, whichever is greater
Leakage Current (OFF-State): < 5ma @ 240V AC

For Variable Voltage & Temperature w/i specifications:
+5% of set time or +50ms, whichever is greater
Repeat Accuracy: Effective Voltage Drop (ON-State): Maximum 3V @ 1A for all voltages
Constant Voltage & Temperature w/i specifications:
+0.1% of set time or +0.02 seconds, whichever is greater Compatibility:
For Variable Voltage & Temperature w/i specifications: Using a solid state switch to initiate the time sequence is acceptable.
+1% of set time or +0.02 seconds, whichever is greater See www.macromatic.com/leakage or contact Macromatic for
Reset Time: 50ms considerations.
Start-up Time: Mounting:
(Time from when power is applied until unit is timing) Surface with one #8 or #10 screw and a maximum tightening torque of 15
0.02 Seconds in-lbs.
Maintain Function Time: Termination:
(Time unit continues to operate after power is removed) 0.25” male quick-connect terminals
0.01 Seconds
Approvals:
File #E236146
Dimensions
All Dimensions in

NON-PROGRAMMABLE | ON DELAY, INTERVAL,
TRUE OFF DELAY & FLASHER
TR-5 Series
INPUT VOLTAGE CATALOG WIRING/
FUNCTION  50/60Hz. NUMBER ** SOCKETS 
ON DELAY 120V AC/DC TR-50222-**
12V DC TR-50226-** 8 PIN OCTAL
24V AC/DC TR-50228-** 70169-D
240V AC TR-50221-**
INTERVAL ON 120V AC/DC TR-50522-**
12V DC TR-50526-**
24V AC/DC TR-50528-**
240V AC TR-50521-**
 Onboard & remote adjustable TRUE OFF DELAY 120V AC/DC TR-50622-**
or fixed time delays from 0.05 12V DC TR-50626-**
time delay relays | plug-in
seconds to 2 hours 24V AC/DC TR-50628-** DIAGRAM 1

 Uses industry-standard 8 pin 240V AC TR-50621-**
octal sockets FLASHER 120V AC/DC TR-50822-**
(OFF 1st) 12V DC TR-50826-**
 10A DPDT output contacts
24V AC/DC TR-50828-**
 Pilot duty rating 240V AC TR-50821-**

 Note: If these products are ordered with the Remote Adjustable Time Delay
modification (suffix -Rx), they will require an 11 pin octal socket−see
with appropriate
socket
www.macromatic.com/remote for information. Remote Adjustable Time Delay
not available on TR-506 products.
Time Delays
TR-5 Series Products have three time delay options:
Table at right, i.e., TR-50222-05 is an On Delay Time Delay Range Code
with a time delay range of 0.1-10 seconds. 0.05 - 5 Sec. 04
Code with suffix “F” followed by delay [0.1 ... 0.3 - 30 Sec. 07X
0.6 - 60 Sec. 08
100] followed by (S) seconds, (M) minutes or (H) 1.2 - 120 Sec. 09
hours, i.e., TR-50222-F5S is an On Delay with a 1.8 - 180 Sec. 10
time delay fixed at 5 seconds. 3 - 300 Sec. 12
 Remote Adjustable Time Delay--Selected TR-5 0.1 - 10 Min. 22
Series products can be built with two terminals 0.3 - 30 Min. 15
for remote adjustable or fixed time delays. See 0.6 - 60 Min. 16X
800.238.7474 www.macromatic.com/remote for information. 1.2 - 120 Min.

X Not offered on TR-506
17X
www.macromatic.com Sockets & Accessories available

20
NON-PROGRAMMABLE | OFF DELAY, SINGLE SHOT,
WATCHDOG & SINGLE SHOT FALLING EDGE

TR-5 Series
INPUT
VOLTAGE CATALOG WIRING/
FUNCTION   50/60Hz. NUMBER ** SOCKETS 
OFF DELAY 120V AC/DC TR-51622-** 11 PIN OCTAL

Control Switch Trigger 12V DC TR-51626-** 70170-D
24V AC/DC TR-51628-**
240V AC TR-51621-**
SINGLE SHOT 120V AC/DC TR-51522-**
Control Switch Trigger 12V DC TR-51526-**
24V AC/DC TR-51528-**
240V AC TR-51521-**
WATCHDOG 120V AC/DC TR-51322-**

seconds to 2 hours
(Retriggerable 24V AC/DC TR-51328-** DIAGRAM 2  Uses industry-standard
Single Shot) 240V AC TR-51321-** 11 pin octal sockets
 10A DPDT output contacts
FALLING EDGE 12V DC TR-52226-**
Control Switch Trigger 24V AC/DC TR-52228-**  Pilot duty rating
240V AC TR-52221-**
OFF DELAY 120V AC/DC TR-51922-** 11 PIN OCTAL
Power Trigger 12V DC TR-51926-** 70170-D
24V AC/DC TR-51928-**
240V AC TR-51921-**
with appropriate
Power Trigger 12V DC TR-51726-**
socket
24V AC/DC TR-51728-**
240V AC TR-51721-**
(Retriggerable 24V AC/DC TR-51828-**
Single Shot) 240V AC TR-51821-** DIAGRAM 4
 8 Pin SPDT versions of these functions (except Single Shot Falling Edge) are
available.
Time Delays
Table at right, i.e., TR-51622-05 is an Off Delay Time Delay Range Code
0.1 - 10 Sec. 05
Code with suffix “F” followed by delay [0.1 ... 0.6 - 60 Sec. 08
hours, i.e., TR-51622-F5S is an Off Delay with a 1.8 - 180 Sec. 10
 Remote Time Delay--Selected TR-5 Series 0.1 - 10 Min. 22
products can be built with two terminals for 0.3 - 30 Min. 15
remote adjustable or fixed time delays. See 0.6 - 60 Min. 16
www.macromatic.com/remote for information.
1.2 - 120 Min. 17
800.238.7474
Sockets & Accessories available www.macromatic.com
21
NON-PROGRAMMABLE | REPEAT CYCLE, ON/OFF DELAY,
& DELAYED INTERVAL
TR-5 Series
INPUT
FUNCTION  50/60Hz. NUMBER ** SOCKET
REPEAT CYCLE* 120V AC/DC TR-53122-**

(OFF Time First Followed 12V DC TR-53126-** 8 PIN OCTAL
By ON Time 24V AC/DC TR-53128-** 70169-D
and Repeating) 240V AC TR-53121-**
ON/TRUE OFF DELAY 120V AC/DC TR-54622-**
12V DC TR-54626-**
24V AC/DC TR-54628-**
 Onboard & remote adjustable 240V AC TR-54621-**
or fixed time delays from 0.05 REPEAT CYCLE* 120V AC/DC TR-55122-**
seconds to 2 hours (ON Time First Followed 12V DC TR-55126-** DIAGRAM 1

 Independently adjustable ON & By OFF Time 24V AC/DC TR-55128-**
OFF times and Repeating) 240V AC TR-55121-**
DELAYED INTERVAL* 120V AC/DC TR-56122-**
 Uses industry-standard 8 or 11 (OFF Time Followed by 12V DC TR-56126-**
pin octal sockets ON Time Followed by OFF 24V AC/DC TR-56128-**
 10A DPDT output contacts State Until Reset) 240V AC TR-56121-**
 Pilot duty rating ON/OFF DELAY* 120V AC/DC TR-54122-** 11 PIN OCTAL
Control Switch Trigger 12V DC TR-54126-** 70170-D
24V AC/DC TR-54128-**
240V AC TR-54121-**
DELAYED INTERVAL* 120V AC/DC TR-56522-**
(OFF Time Followed by 24V AC/DC TR-56528-**
with appropriate ON Time Followed by OFF 240V AC TR-56521-**
socket State Until Reset) DIAGRAM 2

Time Delays
 Onboard Adjustable Time Delay--complete Product ** TIMING RANGE TABLE
Number by adding two-digit Code from Table at
right, i.e., TR-53122-05 is a Repeat Cycle with both Time Delay Range Code
an ON & OFF time delay range of 0.1-10 seconds. 0.05 - 5 Sec. 04
See www.macromatic.com/onoff for information 0.1 - 10 Sec. 05
on how to order a unit with different ON & OFF time 0.3 - 30 Sec. 07X
ranges. 0.6 - 60 Sec. 08
 Onboard Fixed Time Delay--replace two-digit Code 1.2 - 120 Sec. 09
with suffix “F” followed by delay [0.1 ... 100] followed 1.8 - 180 Sec. 10
by (S) seconds, (M) minutes or (H) hours, i.e., TR- 3 - 300 Sec. 12
53122-F5S is a Repeat Cycle with a time delay fixed 0.1 - 10 Min. 22
0.3 - 30 Min. 15
at 5 seconds.
 Remote Time Delay--Selected TR-5 Series products 0.6 - 60 Min. 16 X
can be built with two terminals for remote adjustable 1.2 - 120 Min. 17X
800.238.7474 or fixed time delays.
See www.macromatic.com/remote for information.
X Not offered on TR-546
22
TR-5 SERIES
Non-Programmable
Application Data
Voltage Tolerance: Life:
AC Operation: +10/-15% of nominal at 50/60 Hz. Mechanical: 10,000,000 operations (2,000,000 operations
DC Operation: +10/-15% of nominal. on TR-506 & TR-546 Series only)
Load (Burden):
Maximum of 2 VA for all voltages Compatibility:
Using a solid state switch to initiate the time sequence is
Setting Accuracy:
acceptable. See www.macromatic.com/leakage or contact
Maximum Setting (Adjustable): +5%, -0% Macromatic for information regarding leakage current limits and
Minimum Setting (Adjustable): +0%, -50% other solid state design considerations.
Fixed Time Delay: +2% or 50ms, whichever is greater
Triggering Off Delay, Single Shot or Watchdog Units:

Timing sequence must be initiated only after input voltage is ap-
+0.1% or + 0.04 seconds, whichever is greater plied to unit. Minimum required trigger switch closure time is 0.05
Reset Time: seconds.
Input Voltage (All Functions) 0.100 Seconds IMPORTANT FOR TR-506 & TR-546 SERIES ONLY: These
Triggered Functions only 0.04 Seconds relays are shipped from the factory in the OFF state. A shock to
Start-up Time: the relay during shipping or installation may cause it to change to
(Time from when power is applied until unit is timing) the ON state. It is recommended that input voltage be applied to
the product for at least 0.1 second and removed to cycle the unit to
0.05 Seconds the OFF state prior to use in the application. Please note that it will
Maintain Function Time: take as long as the OFF Delay setting to reset the unit once input
(Time unit continues to operate after power is removed) voltage has been removed.
0.01 Seconds for all units Approvals:
Temperature: Operating: -28 to 65 C (-18 to 149 F)
o o o o (All TR-5 Series Products
Storage: -40o to 85oC (-40o to 185oF) except TR-506 & TR-546)
File #E109466 File #LR45565
Output Contacts:
(All TR-5 Series Products except TR-506 & TR-546) (TR-506 & TR-546 only)
DPDT 10A @ 240V AC/30V DC,
1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.) File #E109466
B300 & R300; AC15 & DC13
(All TR-5 Series
(TR-506 & TR-546)
Products)
DPDT 10A @ 240V AC; 8A @ 28V DC, Low Voltage &
1/2 HP @ 240V AC, 1/4HP @ 120V AC EMC Directives with
appropriate
B300 & R300 EN60947-1, EN60947-5-1 socket
File #E109466
Dimensions
2.4
(60)
2.9
(74)
1.7 3.5
(43) (89)
All Dimensions in

NON-PROGRAMMABLE | OFF DELAY, SINGLE SHOT
& WATCHDOG
8 Pin | SPDT Versions | TR-5 Series
INPUT
FUNCTION  50/60Hz. NUMBER ** SOCKETS 
OFF DELAY 120V AC/DC TR-51662-**
Control Switch Trigger 12V DC TR-51666-** 8 PIN OCTAL
24V AC/DC TR-51668-** 70169-D 
240V AC TR-51661-**
24V AC/DC TR-51568-**
 These are 8 pin 10A SPDT 240V AC TR-51561-**
versions of our standard 11 pin WATCHDOG 120V AC/DC TR-51362-**
DPDT products Control Switch Trigger 12V DC TR-51366-**

or fixed time delays from 0.05 Single Shot) 240V AC TR-51361-** DIAGRAM 11
seconds to 2 hours OFF DELAY 120V AC/DC TR-51962-** 8 PIN OCTAL
Power Trigger 12V DC TR-51966-** 70169-D 
 Uses industry-standard 8 pin
24V AC/DC TR-51968-**
octal socket
240V AC TR-51961-**
 Pilot duty rating SINGLE SHOT 120V AC/DC TR-51762-**
PowerTrigger 12V DC TR-51766-**
24V AC/DC TR-51768-**
240V AC TR-51761-**
with appropriate Single Shot) 240V AC TR-51861-** DIAGRAM 37
socket
 Note: if these products are ordered with the Remote Adjust Potentiometer mod-
ification (suffix -Rx), they will require an 11 pin octal socket−−see
www.macromatic.com/remote for information.
Time Delays
** TIMING RANGE TABLE
Table at right, i.e., TR-51662-05 is an Off Delay
0.05 - 5 Sec. 04
Code with suffix “F” followed by delay [0.1 ... 0.6 - 60 Sec. 08
hours, i.e., TR-51662-F5S is an Off Delay with a 1.8 - 180 Sec. 10
0.1 - 10 Min. 22
 Remote Time Delay--Selected TR-5 Series
0.3 - 30 Min. 15
products can be built with two terminals for 0.6 - 60 Min. 16
remote adjustable or fixed time delays. See 1.2 - 120 Min. 17
800.238.7474 www.macromatic.com/remote for information.

24
NON-PROGRAMMABLE | OFF DELAY, SINGLE SHOT
& WATCHDOG
8 Pin | SPDT Versions | TR-5 Series
Application Data
AC Operation: +10/-15% of nominal at 50/60 Hz. Storage: -40o to 85oC (-40o to 185oF)
DC Operation: +10/-15% of nominal.
Output Contacts:
Load (Burden):
SPDT 10A @ 240V AC/30V DC,
Maximum of 2 VA for all voltages 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
Setting Accuracy: B300 & R300; AC15 & DC13
Maximum Setting (Adjustable): +5%, -0% Life:
Minimum Setting (Adjustable): +0%, -50% Mechanical: 10,000,000 operations
Fixed Time Delay: +2% or 50ms, whichever is greater Full Load: 100,000 operations
Compatibility:

+0.1% or + 0.04 seconds, whichever is greater Using a solid state switch to initiate the time sequence is
Reset Time:
Macromatic for information regarding leakage current limits and
Input Voltage (All Functions) 0.100 Seconds other solid state design considerations.
Triggered Functions only 0.04 Seconds
Triggering Off Delay, Single Shot or Watchdog Units:
Start-up Time:
Timing sequence must be initiated only after input voltage is applied
to unit. Minimum required trigger switch closure time is 0.05
0.05 Seconds seconds.
Maintain Function Time: Approvals:
0.01 Seconds for all units
File #E109466 File #LR45565 Low Voltage &
EMC Directives with
appropriate
EN60947-1, EN60947-5-1 socket
File #E109466
Dimensions
2.4
(60)
2.9
(74)
1.7 3.5
(43) (89)
All Dimensions in

PROGRAMMABLE | MULTI-FUNCTION
TR-6 Series Time Ranger tm
The TR-681 & TR-682 Series offer the flexible programmability of a multi-function and
multi-range time delay relay together with a universal input voltage. These products
provide an easy method to select one of eight (TR-681) or four (TR-682) time delay
functions and any time range between 0.05 seconds and 100 hours. Programming is
accomplished through the use of two rotary switches to select function and time range.
The actual time delay is then set by using the potentiometer to adjust within the select-
ed time range. This product can literally replace hundreds of different catalog numbers,
thereby
reducing inventory requirements.
INPUT
FUNCTION  OUTPUT 50/60Hz. NUMBER SOCKETS
 Four or eight timing functions in
one unit easily selectable with 11 Pin 24-240V AC & TR-6812U 11 PIN OCTAL
ON DELAY DPDT 12-125V DC 70170-D
rotary switch
INTERVAL ON
 Each unit has 16 timing ranges OFF DELAY
built-in covering 0.05 seconds-100 SINGLE SHOT
hours FLASHER (ON 1st)
 Selecting a range is easy using a SINGLE SHOT
16-position rotary switch (Falling Edge)
(no math is required or DIP WATCHDOG DIAGRAM 210
switches to set) ON DELAY (Triggered)
8 Pin 24-240V AC & TR-6816U 8 PIN OCTAL
 Universal input voltage: 24-240V SPDT 12-125V DC 70169-D
AC & 12-125V DC
 Utilizes industry-standard 8
or 11 pin octal sockets
 10A SPDT or DPDT output
contacts can handle most pilot
DIAGRAM 211
duty and fractional HP loads
8 Pin 24-240V AC & TR-6822U 8 PIN OCTAL
ON DELAY DPDT 12-125V DC 70169-D
INTERVAL ON
FLASHER
(OFF 1st)
FLASHER
(ON 1st).
DIAGRAM 1
Timing Ranges
Select one of the 16 Dial Setting Timing Range Dial Setting Timing Range
built-in time ranges A 0.05 - 0.5 Sec. I 1 - 10 Min.
by setting the rotary B 0.1 - 1 Sec. J 3 - 30 Min.
switch per a chart on C 0.5 - 5 Sec. K 6 - 60 Min.
the unit (see right) D 1 - 10 Sec. L 0.2 - 2 Hr.
and then adjust within E 3 - 30 Sec. M 0.5 - 5 Hr.
F 6 - 60 Sec. N 1 - 10 Hr.
that range using the
G 0.2 - 2 Min. O 2.4 - 24 Hr.
knob on top. H 0.5 - 5 Min. P 10 - 100 Hr.
800.238.7474
26
Programming Function & Time Delay TR-681 Series

Setting Function: To set the function, first select
one of the eight (TR-681 Series) or four (TR-682 Select Function
Series) functions from the Select Function Chart 1
8 2 1 On Delay
located on the side of the relay (see right). Posi-
7 3 FUNCTION
tion the eight-position rotary switch to the number 2 Interval On
6 4
that corresponds to the desired function. NOTE: 5 SEE CHART 3 Flasher - On 1st
Because the TR-682 Series comes with only four P A B
FOR SETUP
4 Triggered On Delay
functions, but uses an eight-position rotary switch O C
t
N D 1
to select a function, each function can be selected M
L
E
F RANGE
4 2
5 Watchdog
with the same number in two positions. NOTE: K
J I H
G 3 3 FUNCTION
6 Single Shot
Function cannot be changed with power applied 2
1
4
to unit.
SEE CHART
7 Off Delay
t
FOR SETUP
P A B
O C 8 One Shot Falling Edge
t
ADJUST N D
Setting Time Delay and Time Range: To set the M E

L F RANGE
desired time delay, first select one of the 16 time MIN MAX K
J I H
G TR-682 Series
ranges from the Timing Range Chart located on the TR-681 Series
side of the relay. Position the rotary switch to the Select Function
letter that corresponds to the desired time range.
Then adjust the time delay within the selected time
t ADJUST
1 On Delay
2 Interval On
range by rotating the large knob of the potentiome- MIN MAX
ter located on top of the unit. Note: The tick marks 3 Flasher - Off 1st
are for reference only. TR-682 Series
4 Flasher - On 1st
Application Data
Voltage Tolerance: Temperature:
AC Operation: 20.4 – 264V at 50/60 Hz Operating: -28o to 65oC (-18o to 150oF)
DC Operation: 10.2 – 137.5V Storage: -40o to 85oC (-40o to 185oF)
Load (Burden): Functions Triggered By A Control Switch:
Maximum of 3 VA for all voltages Minimum required trigger switch closure time is 50ms.
Setting Accuracy: Compatibility:
Maximum Setting (Adjustable): +5%, -0% Using a solid state switch to initiate the time sequence is
Minimum Setting (Adjustable): +0%, -50% acceptable. See www.macromatic.com/leakage or contact
other solid state design considerations.
+0.1% or +50ms, whichever is greater
Output Contacts:
Reset Time: 10A @ 240V AC/30V DC,
Functions Triggered with Input Voltage: 0.1 Seconds 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
Functions Triggered with Control Switch: 0.04 Seconds B300 & R300 (N.O.); AC15 & DC13
Start-up Time: (Time from when power is applied until unit is Life:
timing): 50ms Mechanical: 10,000,000 operations
Maintain Function Time: (Time unit continues to operate after
power is removed): 0.01 Seconds Approvals:
File #E109466 Low Voltage &
EMC Directives
EN60947-1, EN60947-5-1
Dimensions
All Dimensions in

PROGRAMMABLE | MULTI-RANGE
ON DELAY,TR-6
INTERVAL ON & FLASHER
Series Time Ranger tm
The TR-6 Series offers the flexible programmability of a multi-range time delay
relay together with a universal input voltage. These products provide an easy
method to select one of 16 time ranges between 0.05 seconds and 100 hours
using a rotary switch. The actual time delay is then set by using the potentiometer
to adjust within the selected time range.

INPUT VOLTAGE CATALOG WIRING/
FUNCTION  50/60Hz. NUMBER SOCKETS
ON DELAY 24-240V AC & TR-6022U 8 PIN OCTAL
12-125V DC 70169-D

 Each unit has 16 timing ranges

built-in covering 0.05 seconds-100
INTERVAL ON 24-240V AC & TR-6052U
hours
12-125V DC
 Selecting a range is easy using a
rotary switch (no math is required
or DIP switches to set)
FLASHER 24-240V AC & TR-6082U
 Universal input voltage: 24-240V (OFF 1st) 12-125V DC DIAGRAM 1
AC & 12-125V DC

 Uses industry-standard 8 pin
octal sockets FLASHER 24-240V AC & TR-6092U
(ON 1st) 12-125V DC
 10A DPDT output contacts can
handle most pilot duty & fractional
HP loads
Timing Ranges
Select one of the 16 built-in time ranges by setting the rotary switch per a chart on the
unit (see below) and then adjust within that range using the knob on top.
Dial Setting Timing Range

A 0.05 - 0.5 Sec.
B 0.1 - 1 Sec.
C 0.5 - 5 Sec.
D 1 - 10 Sec.
E 3 - 30 Sec.
F 6 - 60 Sec.
G 0.2 - 2 Min.
H 0.5 - 5 Min.
I 1 - 10 Min.
J 3 - 30 Min.
K 6 - 60 Min.
L 0.2 - 2 Hr.
M 0.5 - 5 Hr.
N 1 - 10 Hr.
O 2.4 - 24 Hr.
P 10 - 100 Hr.
800.238.7474
28
OFF DELAY, TR-6
SINGLE SHOT & WATCHDOG
Series Time Ranger tm
INPUT
CATALOG
FUNCTION  VOLTAGE WIRING/SOCKETS
NUMBER
50/60Hz..
OFF DELAY  24-240V AC & TR-6162U 11 PIN OCTAL
Control Switch Trigger 12-125V DC 70170-D
 Each unit has 16 timing ranges
built-in covering 0.05 seconds-100
SINGLE SHOT 24-240V AC & TR-6152U
hours

Control Switch Trigger 12-125V DC
 Selecting a range is easy using a
rotary switch (no math is required
WATCHDOG 24-240V AC & TR-6132U
or DIP switches to set)
Control Switch Trigger 12-125V DC
(Retriggerable Single Shot)  Universal input voltage: 24-240V
DIAGRAM 212 AC & 12-125V DC
OFF DELAY  24-240V AC & TR-6192U 11 PIN OCTAL  Uses industry-standard 11 pin
Power Trigger 12-125V DC 70170-D octal sockets
SINGLE SHOT 24-240V AC & TR-6172U handle most pilot duty & fractional
Power Trigger 12-125V DC HP loads
WATCHDOG 24-240V AC & TR-6182U

Power Trigger 12-125V DC
(Retriggerable Single Shot)
DIAGRAM 216

 See TR-606 Series for True Off Delay function.
Timing Ranges
Select one of the 16 built-in time ranges by setting the rotary switch per a chart on
the unit (see below) and then adjust within that range using the knob on top.

A 0.05 - 0.5 Sec.
B 0.1 - 1 Sec.
C 0.5 - 5 Sec.
D 1 - 10 Sec.
E 3 - 30 Sec.
F 6 - 60 Sec.
G 0.2 - 2 Min.
H 0.5 - 5 Min.
I 1 - 10 Min.
J 3 - 30 Min.
K 6 - 60 Min.
L 0.2 - 2 Hr.
M 0.5 - 5 Hr.
N 1 - 10 Hr.
O 2.4 - 24 Hr.
P 10 - 100 Hr. 800.238.7474
29
REPEAT CYCLE & DELAYED INTERVAL
INPUT
FUNCTION  50/60Hz. NUMBER SOCKET
REPEAT CYCLE* 24-240V AC & TR-6312U

(OFF Time First Followed 12-125V DC 8 PIN OCTAL
 Each unit has 16 timing ranges By ON Time 70169-D
built-in covering 0.05 seconds-100 and Repeating)
hours REPEAT CYCLE* 24-240V AC & TR-6512U

 Selecting a range is easy using a (ON Time First Followed 12-125V DC
rotary switch (no math is required By OFF Time
or DIP switches to set) and Repeating)
 Independently selectable & DELAYED INTERVAL* 24-240V AC & TR-6612U

adjustable ON & OFF times (OFF Time Followed by 12-125V DC DIAGRAM 1
ON Time Followed by OFF
 Universal input voltage: 24-240V State Until Reset)
AC & 12-125V DC
11 PIN OCTAL
 Uses industry-standard 8 or 11 DELAYED INTERVAL* 24-240V AC & TR-6652U 70170-D
pin octal sockets Control Switch Trigger 12-125V DC
(OFF Time Followed by
ON Time Followed by OFF
handle most pilot duty & fractional
State Until Reset)
HP loads
DIAGRAM 212
* These units have independently selectable & adjustable ON & OFF times. See
www.macromatic.com/onoff for more information.
Timing Ranges
the unit (see below) and then adjust within that range using the knob on top.

A 0.05 - 0.5 Sec.
B 0.1 - 1 Sec.
C 0.5 - 5 Sec.
D 1 - 10 Sec.
E 3 - 30 Sec.
F 6 - 60 Sec.
G 0.2 - 2 Min.
H 0.5 - 5 Min.
I 1 - 10 Min.
J 3 - 30 Min.
K 6 - 60 Min.
L 0.2 - 2 Hr.
M 0.5 - 5 Hr.
N 1 - 10 Hr.
800.238.7474

O
P
2.4 - 24 Hr.
10 - 100 Hr.
30
Application Data
Voltage Tolerance: Triggering Off Delay, Single Shot or Watchdog Units:
AC Operation: 20.4 – 264V at 50/60 Hz Timing sequence must be initiated only after input voltage is
DC Operation: 10.2 – 137.5V applied to unit. Minimum required trigger switch closure time is
Load (Burden): 0.1 seconds.
Maximum of 3 VA for all voltages Compatibility:
Setting Accuracy: Using a solid state switch to initiate the time sequence is
Maximum Setting (Adjustable): +5%, -0% acceptable. See www.macromatic.com/leakage or contact
Minimum Setting (Adjustable): +0%, -50% Macromatic for information regarding leakage current limits and
Output Contacts:
+0.1% or +50ms, whichever is greater

DPDT 10A @ 240V AC/30V DC,
Reset Time: 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
Functions Triggered with Input Voltage: 0.1 Seconds B300 & R300 (N.O.); AC15 & DC13
Functions Triggered with Control Switch: 0.04 Seconds
Life:
Start-up Time: Mechanical: 10,000,000 operations
(Time from when power is applied until unit is timing) Full Load: 100,000 operations
0.05 Seconds
Approvals:
EMC Directives
0.01 Seconds EN60947-1, EN60947-5-1
Temperature:
Operating: -28o to 65oC (-18o to 150oF)
Dimensions
TR-602, TR-605, TR608, TR609, TR-613, TR-615, TR-616,

TR-631-TR-651, TR-661 & TR-665
TR-617, TR-618 & TR-619
All Dimensions in

TRUE OFF DELAY
A True Off Delay time delay relay is designed to replace the functionality of pneumat-
ic time delay relays which are very large, expensive and not very accurate. Unlike
standard electronic Off Delay time delay relays (see page 29), a True Off Delay does
not require a trigger switch or the continuous application of input voltage. Instead,
these products keep the logic circuit and relay energized during the Off Delay (Delay
on De-energization) period with an onboard power source.
The Macromatic TR-606 Series is a perfect product to use when a trigger switch is not
available in the circuit or when the application is to replace the functionality of a pneu-
matic time delay relay. These products come with 8 separate timing ranges covering
0.5 seconds – 30 minutes which are easy to select & setup with one rotary switch &
 Each unit has 8 timing built-in potentiometer.
covering 0.05 seconds - 30 minutes
 Selecting a range is easy using a Operation: Upon application of input

rotary switch (no math is required voltage, the output is energized. When
or DIP switches to set) the input voltage is removed, the time
delay (t) begins. At the end of the time
 Uses industry-standard 8 pin octal delay (t), the output is de-energized.
sockets Input voltage must be applied for a min-
 10A DPDT output contacts can imum of 0.5 seconds to assure proper operation. Any application of the input voltage
handle most pilot duty & fractional during the time delay (t) will reset the time delay. No external trigger is required.
HP loads
INPUT
CATALOG
FUNCTION  VOLTAGE WIRING/SOCKETS
NUMBER
50/60Hz..
TRUE OFF DELAY 120V AC/DC TR-60622 8 PIN OCTAL
12V DC TR-60626 70169-D
24V AC/DC TR-60628
240V AC TR-60621
48V AC/DC TR-60624
DIAGRAM 1
Timing Ranges
the unit (see below) and adjust within that range using the knob on top:
Dial Timing
Setting Range
A 0.05 - 5 Sec.
B 0.1 - 10 Sec.
C 0.3 - 30 Sec.
D 0.6 - 60 Sec.
E 1.8 - 180 Sec.
F 3 - 300 Sec.
G 0.1 - 10 Min.
H 0.3 - 30 Min.
800.238.7474
32
TRUE OFF DELAY
Application Data
AC Operation: +10/-15% of nominal at 50/60 Hz DPDT 10A @ 240V AC; 8A @ 28V DC,
DC Operation: +10/-15% of nominal 1/2 HP @ 240V AC, 1/4HP @ 120V AC
B300 & R300
Load (Burden):
Maximum of 2 VA for all voltages. These products draw a brief Life:
inrush current on power-up of 1A to charge the internal circuitry. Mechanical: 2,000,000 operations
Setting Accuracy:
Maximum Setting (Adjustable): +5%, -0% IMPORTANT: These relays are shipped from the factory in the
Minimum Setting (Adjustable): +0%, -50% OFF state. A shock to the relay during shipping or installation
may cause it to change to the ON state. It is recommended that
Repeat Accuracy (constant voltage and temperature): input voltage be applied to the product for at least 0.1 second

+50ms and removed to cycle the unit to the OFF state prior to use in the
application. Please note that it will take as long as the OFF Delay
Reset Time: 0.1 Seconds setting to reset the unit once input voltage has been removed.
Start-up Time: Approvals:

0.05 Seconds EMC Directives
EN60947-1, EN60947-5-1
Temperature:
-28o to 65oC (-18o to 150oF)
Compatibility:
Using a solid state switch to initiate the time sequence is
Dimensions
All Dimensions in

DIP-Switch | Digital-Set | TD-8 Series
The TD-881 Series offers the digital-set accuracy of

DIP-switch setting as well as the flexible programmabil-
ity of a multi-function and multi-time range relay. These
products provide an easy and accurate method to se-
lect any of 16 time delay functions and any time delay
between 50ms and 10,230 hours (310 hours maximum
for Dual Mode functions). Programming is accom-
plished through the use of two 10-position DIP-switch-
es. This product can literally replace hundreds of
different catalog numbers, thereby reducing inventory
requirements.
 Sixteen user-selectable modes
in one unit
 DIP-Switches for accurate MULTI-FUNCTION 

digital set of time delay & (16 Functions in One Unit)
selection of function
Single Mode Dual Mode
 50ms - 10,230 hours  On Delay  Repeat Cycle (OFF 1st)
programmable time delay  Interval On  Repeat Cycle (ON 1st)
(Single Mode functions only)  Flasher (OFF 1st)  Delayed Interval
 Uses industry-standard 8 or 11  Flasher (ON 1st)  Triggered Delayed Interval *
pin octal socket  Off Delay *  On/Off Delay *
 Single Shot *  Single Shot-Flasher *
 Pilot duty rating  Watchdog *  On Delay/Flasher
 Single Shot (Trailing Edge) *
 Triggered On Delay *
* These are the only functions requiring use of the Control Switch shown in Wiring
Diagrams below.
with appropriate INPUT CATALOG WIRING/

socket OUTPUT VOLTAGE NUMBER SOCKETS
11 Pin 120V AC/DC TD-88122 11 PIN OCTAL
DPDT 12V DC TD-88126 70170-D
24V AC/DC TD-88128
240V AC TD-88121

DIAGRAM 121
8 Pin 120V AC/DC TD-88162 8 PIN OCTAL
SPDT 12V DC TD-88166 70169-D
24V AC/DC TD-88168
240V AC TD-88161

DIAGRAM 169
800.238.7474  See “Definitions of Timing Functions”.
34
PROGRAMMABLE | SINGLE FUNCTION
DIP-Switch | Digital-Set | TD-8 Series
The TD-8 Series time delay relays offer an easy and accurate method to select any
time delay between 100ms and 1,023 hours. Programming is accomplished through
the use of a 10-position DIP-switch. Each position is marked with a binary time
increment. The required delay is selected by moving the switch of each increment
to the ON position and adding their corresponding values (see examples below).
This method provides a greater setting accuracy than is found on other units with an
analog potentiometer. An LED indicates relay status.
INPUT
FUNCTION  50/60Hz. NUMBER ** SOCKETS
ON DELAY 120V AC/DC TD-80222-** Single Mode Dual Mode
12V DC TD-80226-**  DIP-Switches for accurate
24V AC/DC TD-80228-** 8 PIN OCTAL digital set of time delay

240V AC TD-80221-** 70169-D
 100ms - 1,023 hours program-
INTERVAL ON 120V AC/DC TD-80522-**
mable time delay
12V DC TD-80526-**
24V AC/DC TD-80528-**  Uses industry-standard 8 or 11
240V AC TD-80521-** pin octal sockets
REPEAT CYCLE * 120V AC/DC TD-83122-**  10A DPDT output contacts
(OFF Time First Followed 12V DC TD-83126-** 8 PIN OCTAL
By ON Time 24V AC/DC TD-83128-**  LED indicates relay status
and Repeating) 240V AC TD-83121-** DIAGRAM 1  Pilot duty rating
REPEAT CYCLE * 120V AC/DC TD-85122-**
(ON Time First Followed 12V DC TD-85126-**
By OFF Time 24V AC/DC TD-85128-**
and Repeating) 240V AC TD-85121-**
OFF DELAY 120V AC/DC TD-81622-** 11 PIN OCTAL
Control Switch Trigger 12V DC TD-81626-** 70170-D
with appropriate
24V AC/DC TD-81628-** socket
240V AC TD-81621-**
SINGLE SHOT 120V AC/DC TD-81522-**
Control Switch Trigger 12V DC TD-81526-**
24V AC/DC TD-81528-**
240V AC TD-81521-**
DIAGRAM 2
www.macromatic.com/onoff for information on how to order a unit with different ON &
OFF time ranges.
Time Delays
**TIMING RANGE TABLE
COMPLETE PRODUCT NUMBER
USING TWO DIGIT CODE BELOW:
i.e., TD-80222-40
ime Delay Range

T Code
0.1 - 102.3 Sec. 40
1 - 1,023 Sec. 41
10 - 10,230 Sec. 42
1 - 1,023 Min. 43
10 - 10,230 Min. 44
1 - 1,023 Hr. 45
800.238.7474
35
ME BASE
FUNCTIONS
N ON ON
N OFF ON
N ON OFF
N ON ON
N OFF OFF
N OFF ON
N ON OFF
N OFF OFF
F OFF ON
F ON OFF
F OFF ON
F ON OFF
F ON ON
F OFF OFF
F OFF OFF
F ON ON
J K
F G
TD-8 SERIES
DIP-Switch | Digital-Set
Programming Function & Time Delay Top Side

(TD-881 Series Multi-Function Only)
Programming is accomplished through the use of two 10-position STATUS
GRN - POWER ON
TIME DELAY
DIP-switches. Switches A-D of the left-mounted DIP-switch are RED- RELAY ON
MODE (t)
SINGLE
MODE
DUAL
ON OFF ON
used to select a function (see the descriptions of how each function A- -1 1
FUNCTION
1ST DELAY
operates in “Definition of Timing Functions” in this catalog). Switch- B-
C-
-2
-4
2
t1 4
es E, F & G of the same DIP-switch are used to select the time

D- -8 8
E- - 16 16
F- - 32 1
base (t) for single mode functions and (t1) for dual mode functions.
TIME BASE
2ND DELAY
G- - 64 2
H- - 128 t2 4
Switches H, J & K are used to select the time base (t2) for dual J -
K-
- 256
- 512 16
8
mode functions. A convenient chart is on the side of the product to SEE CHART ON SIDE COMBINE FOR
clearly illustrate how to set both the function and time base.
FOR FUNCTION & TOTAL TIME
TIME BASE SETUP
The right-mounted 10-position DIP-switch is used to select the

time delay within the time base or bases selected with switches E-K from the first DIP-switch. Each position on the right-mounted
DIP-switch is marked with a time increment. The required delay, (t) for single mode functions or (t1) and (t2) for dual mode functions, is
selected by moving the switch of each increment to the ON position and adding their corresponding values. NOTE: Dual mode func-
tions can either have the same or different (t1) and (t2) times as well as different time bases. NOTE: Switches H, J ,& K are only
used on dual mode functions and are not used for single mode functions.
LED Indicator: Green ON--Power, Red ON--Relay Energized
For more information, see www.macromatic.com/
Application Data
Voltage Tolerance: Insulation Voltage: 2,000 volts
AC Operation: +10/-15% of nominal at 50/60 Hz.
DC Operation: +10/-15% of nominal. Temperature: Operating: -28o to 65oC (-18o to 149oF)
Load (Burden): 2 VA Storage: -40o to 85oC (-40o to 185oF)
Setting Accuracy: Output Contacts:

Constant Voltage & Temperature w/i specifications: DPDT 10A @ 240V AC/30V DC,
+0.1% of set time or +50ms, whichever is greater 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120V AC (N.C.)
For Variable Voltage & Temperature w/i specifications: B300 & R300; AC15 & DC13
+1% of set time or +50ms, whichever is greater Life:
Mechanical: 10,000,000 operations
Repeat Accuracy: Full Load: 100,000 operations
+0.1% of set time or +0.02 seconds, whichever is greater Compatibility:
For Variable Voltage & Temperature w/i specifications: Using a solid state switch to initiate the time sequence is
+1% of set time or +0.02 seconds, whichever is greater acceptable. See www.macromatic.com/leakage or contact
+1% of set time or +0.02 seconds, whichever is greater Macromatic for information regarding leakage current limits and
Reset Time:
All Functions Triggered by a Control Switch: 0.04 Seconds Control Switch Triggered Units:
All Other Functions: 0.1 Seconds Minimum required trigger switch closure time is 0.05 seconds.
File #E109466 File #LR45565 Low Voltage &
Maintain Function Time: EMC Directives with
appropriate
(Time unit continues to operate after power is removed) EN60947-1, EN60947-5-1 socket
0.01 Seconds for all units File #E109466
Dimensions
2.4 (60)
All Dimensions in
2.9
(74)
1.7 3.0
(43) (76)

Digital-Set | TD-7 Series Time Rangertm
The TD-781 Series offers an easy and accurate way to select a function and any
time delay between 50ms and 999 hours. Programming is accomplished by using
a pushbutton thumbwheel to select one of seven built-in time ranges and three
pushbutton thumbwheels to digitally set the time delay required. This method
provides a greater setting accuracy than is found on other units with an analog
potentiometer. These units have a fifth pushbutton thumbwheel to select one of
ten built-in functions. An LED indicates timing mode and time out condition.
Single-function versions available.
Multi-Function Product
 Ten user-selectable modes in
INPUT CATALOG WIRING/ one unit

FUNCTION  VOLTAGE NUMBER SOCKETS
 Pushbutton Thumbwheels
MULTI-FUNCTION 120V AC/DC TD-78122 11 PIN OCTAL for digital set of time delay &
(10 Functions in One Unit) 12V DC TD-78126 70170-D function
On Delay 24V AC/DC TD-78128
Interval On 240V AC TD-78121  50ms - 999 hour programmable
Off Delay * time range
Single Shot *  Uses industry-standard 11 pin
Flasher (OFF 1st) octal socket
Flasher (ON 1st)
On/Off Delay *  10A DPDT output contacts
Single Shot Falling Edge *  LED indicates timing mode
Watchdog * and time out conditions
Triggered On Delay * DIAGRAM 121
* These are the only functions requiring use of the Control Switch shown in
Wiring Diagrams above.
Sockets & Accessories available

with appropriate
socket
800.238.7474
www.macromatic.com
37
Digital-Set | TD-7 Series Time Rangertm
The TD-7 series of time delay relays offer an easy and accurate way to select any
time delay between 50ms and 999 hours. Programming is accomplished by using
a pushbutton thumbwheel to select one of seven built-in time ranges and three
pushbutton thumbwheels to digitally set the time delay required. This method
provides a greater setting accuracy than is found on other units with an analog
potentiometer. An LED indicates timing mode and time out condition.
Multi-function versions available.
 Pushbutton Thumbwheels for Single Function Products

digital set of time delay INPUT CATALOG WIRING/
FUNCTION  VOLTAGE NUMBER SOCKETS

 50ms - 999 hour programmable
time range ON DELAY 120V AC/DC TD-70222
12V DC TD-70226 8 PIN OCTAL
 Uses industry-standard 8 or 11 24V AC/DC TD-70228 70169-D
pin octal sockets 240V AC TD-70221
 10A DPDT output contacts INTERVAL ON 120V AC/DC TD-70522
12V DC TD-70526
 LED indicates timing mode and
24V AC/DC TD-70528
time out conditions
240V AC TD-70521
 Pilot duty rating FLASHER 120V AC/DC TD-70822
(OFF 1st) 12V DC TD-70826
24V AC/DC TD-70828 DIAGRAM 1
240V AC TD-70821
OFF DELAY 120V AC/DC TD-71622 11 PIN OCTAL
12V DC TD-71626 70170-D
24V AC/DC TD-71628
with appropriate
240V AC TD-71621
socket
SINGLE SHOT 120V AC/DC TD-71522
12V DC TD-71526
24V AC/DC TD-71528
240V AC TD-71521

DIAGRAM 2
Sockets & Accessories available
800.238.7474
www.macromatic.com
38
TD-7 SERIES TIME RANGERTM
Application Data
AC Operation: +10/-15% of nominal at 50/60 Hz. DPDT 10A @ 240V AC/30V DC,
DC Operation: +10/-15% of nominal. 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
B300 & R300; AC15 & DC13
Load (Burden):
3 VA Life:
Setting Accuracy:
+0.1% of set time or +50ms, whichever is greater Compatibility:
For Variable Voltage & Temperature w/i specifications: Using a solid state switch to initiate the time sequence is
+1% of set time or +50ms, whichever is greater acceptable. See www.macromatic.com/leakage or contact

Repeat Accuracy:
Constant Voltage & Temperature w/i specifications: Initiating Units with Control Switch Triggers:
+0.1% of set time or +0.02 seconds, whichever is greater Timing sequence must be initiated only after input voltage is
For Variable Voltage & Temperature w/i specifications: applied to unit. Minimum required trigger switch closure time is
+1% of set time or +0.02 seconds, whichever is greater 0.1 seconds.
Reset Time: LED:

On Delay/Interval/Flasher: 0.1 Seconds Red LED. Refer to instruction sheet provided with product to
Functions with Control Switches: 0.04 Seconds determine code for relay & timing status.

0.05 Seconds for all units File #E109466 File #LR45565 Low Voltage &
EMC Directives with
Maintain Function Time: appropriate
EN60947-1, EN60947-5-1 socket
(Time unit continues to operate after power is removed) File #E109466
Temperature: Operating: -28o to 65oC (-18o to 149oF)
Insulation Voltage: 2,000 volts
Dimensions
2.4
(60)
2.9
(74)
1.7 3.0
(43) (77)
All Dimensions in

MULTI-FUNCTION | MULTI-RANGE
Digital-Set | TAD Series
MULTI- INPUT CATALOG WIRING/

FUNCTION VOLTAGE NUMBER SOCKETS 
10 FIELD- 24-240V AC 50/60Hz TAD1U SEE
SELECTABLE & 24-240V DC DIAGRAMS
FUNCTIONSl NEXT PAGE
8 Pin Octal

time delay relays | 1/16 din mounting
l Functions Include: On Delay (2 Versions), Interval, Flicker [Flasher] (2 Ver-

sions), One Shot Out Flicker [Delayed Interval/Pulse], Off Delay, On/Off Delay,
 Push-button thumbwheels for Interval Delay [Single Shot] & Integration Time [Accumulative On Delay] See
digital-setting of time delay & “Definitions of Timing Functions”.
selection of function
 See below for Sockets & Accessories.
 10 field-selectable functions in
one unit
Application Data
Voltage Tolerance: LCD Display: Shows time remaining in both
+10% of rated voltage digit & bar graph form--also shows relay
 10ms to 9,990 Hours status & time base. In addition, a switch on
programmable timing range Load (Burden): the bottom of the unit allows choice of timing
Less than 2.5 VA up or timing down display.
 Universal 24-240V AC/DC input
Repeat Accuracy: Output Contacts:
voltage
+0.01%, +0.05 seconds (includes vari- 5A SPDT Resistive @ 250V AC
ation due to voltage and temperature
 LCD display
changes) Life:
 Panel, track or surface mounting Recycle Time:
0.2 seconds maximum
 1/16 DIN style case (comes with Approvals:
Temperature:
panel-mounting adapter)
Operating: -10o to 55oC (14o to 131oF)
Storage: -40o to 85oC (-40o to 185oF) File #E170213
 5A SPDT output contacts
Sockets & Accessories

PRODUCT
DESCRIPTION NUMBER
8 Pin Octal Socket 70169-Dv
8 Pin Octal Socket (Back Mounting) OR08-PC
Panel-Mounting Adaptor Included
v For Surface or Track Mounting-See Sockets &
Accessories for additional information
OR08-PC
Dimensions
PANEL CUTOUT
800.238.7474 All Dimensions in

Inches (mm) All Dimensions in
Millimeters
www.macromatic.com
40
DEFINITION OF TIMING FUNCTIONS
Digital-Set | TAD Series
Functions for TAD1U
time delay relays | definition of timing functions

NOTE: Timing is paused when the INHIBIT signal is ON during a timing cycle and resumes when it is OFF.
TAD1U All Functions
DIAGRAM 171

Analog-Set | TAA Series
MULTI- INPUT CATALOG WIRING/

FUNCTION  VOLTAGE NUMBER SOCKETS 
Includes Six
(6) Functions 100-240V AC TAA1U SEE DIAGRAMS
Built-in (See
“Definitions of 50/60Hz NEXT PAGE
Timing Functions”.)
& 24-240V DC 8 Pin Octal

time delay relays | 1/16 din mounting

Includes Six (6) Functions 100-240V AC TAA2U SEE DIAGRAMS

Built-in (See “Definitions of 50/60Hz NEXT PAGE
Timing Functions”.)
& 24-240V DC 11 Pin Octal
 6 field-selectable functions in
one unit
 See “Definitions of Timing Functions”.
 Large dial for setting of time  See below for Sockets & Accessories.
delay
Application Data
 50ms to 100 Hours Voltage Tolerance: LED Indicators: One red LED indicates
programmable timing range +10% of rated voltage. Input Voltage/Timing (flashing) & a sec-
ond red LED indicates relay status.
Load (Burden):
 Universal 100-240V AC/ 24-
Less than 2.5 VA Output Contacts:
240V DC input voltage
5A DPDT Resistive @ 250V AC
Repeat Accuracy:
 Panel, track or surface mounting +0.01%, +0.05 seconds (includes variation Enclosure Protection Rating:
due to voltage and temperature changes). IP40 (front face)
 1/16 DIN style case (comes with
panel-mounting adapter) Recycle Time: Life:
0.2 seconds maximum. Mechanical: 10,000,000 operations
Temperature: Full Load: 100,000 operations
Operating: -10o to 55oC (14o to 131oF) Approvals:
File #E170213
Sockets & Accessories
PRODUCT
DESCRIPTION NUMBER
8 Pin Octal Socket (Back Mounting) OR08-PC OR08-PC
11 Pin Octal Socket (Back Mounting) SR6P-M11G
Panel-Mounting Adaptor Included
v For Surface or Track Mounting-See Sockets & SR6P-M11G
Accessories for additional information
Dimensions PANEL CUTOUT
800.238.7474 All Dimensions in

All Dimensions in
Millimeters
www.macromatic.com Inches (mm)
42
Analog-Set | TAA Series
Functions for TAA1U Functions for TAA2U

TAA1U Functions A, F TAA1U Functions A1, TAA2U All Functions
B, F1 & I
DIAGRAM 134 DIAGRAM 182 DIAGRAM 183

PROGRAMMABLE
TE-881 Series
The TE-881 Series time delay relays offer 10 timing functions and a universal volt-
age input (12-240V AC/DC) with a programmable time range from 0.1 second – 10
days all in one compact unit. Choose between versions with 15A SPDT or DPDT
output contacts. A green LED indicates input voltage applied; a red LED blinks
during timing and is steady when the output relay is energized. These products
have a compact 17.5mm enclosure which snaps on to 35mm DIN rail. This con-
serves space and reduces installation time, which saves money. With all this
flexibility, the TE-881 Series replaces hundreds of separate time delay relays.
CATALOG NUMBER TE-8816U TE-8812U

 10 field-selectable functions Input
in one unit Voltage Range 12-240V AC/DC, 50/60Hz 12-240V AC/DC, 50/60Hz
t i m e d e l a y r e l a y s | 1 7. 5 m m
 Universal Input Voltage: Operating Range -15% of 12V, +10% of 240V -15% of 12V, +10% of 240V
12-240V AC/DC Burden 3VA (AC), 1.7W (DC) 3VA (AC), 1.7W (DC)
 0.1 second - 10 days Output
programmable time delay Configuration SPDT DPDT
 15A SPDT or DPDT output Rating 15A @ 240V AC
contacts 1/3HP @ 120V AC, 3/4HP @ 240V AC, B300
Minimum Switching 100mA @ 5V AC or 5V DC
 LEDs indicate output relay
status & timing mode Contact Material Silver Alloy
Life 10 million operations mechanical; 70,000 electrical
 Compact 17.5mm enclosure
mounts on 35mm DIN track Timing
Number of Functions 10 (see descriptions on Page 44)
Time Ranges 8 different time ranges built-in:

100 ms - 1 Sec. 0.1 - 1 Hr.
1 - 10 Sec. 1 - 10 Hr.
0.1 - 1 Min. 0.1 - 1 Day
1 - 10 Min. 1 - 10 Days
Repeat Accuracy +0.2%
Setting Accuracy 5%
Reset Time 150ms maximum
Trigger Pulse Length 50ms maximum
Other
Mounting 35mm DIN Rail only
Agency Approval (File #E109466)
Temperature Storage: -30o to 70o C (-22o to 158o F)

Operating: -20o to 55o C (-4o to 131o F)
LED Indication
Green-Input Voltage; Red-Timing or Relay ON
Terminations 14 AWG (2.5mm2)
800.238.7474
www.macromatic.com
[email protected]

PROGRAMMABLE
TE-881 Series
Functions
DIAL DIAL
FUNCTION SETTING GRAPH FUNCTION SETTING GRAPH
REPEAT CYCLE *
ON DELAY A F
(ON 1ST)
PULSE
REPEAT CYCLE
B GENERATOR G
* (OFF 1ST)
(PULSE=0.5 SEC)
t i m e d e l a y r e l a y s | 1 7. 5 m m
INTERVAL C ONE SHOT H
OFF DELAY D ON/OFF DELAY * I
RETRIGGERABLE
MEMORY LATCH
ONE SHOT E J
(Latching Relay)
(Watchdog)
* Note: ON & OFF times are the same.
Connection Diagrams Dimensions
TE-8816U TE-8812U
SPDT DPDT
All Dimensions in

SOCKETS & ACCESSORIES
8 Pin Octal Socket-
Surface or DIN Rail-Mounted
 10A @ 600V
 1 or 2 #12-20 AWG Wire
 Pressure Wire Clamp Terminations
 Recommended Tightening Torque
12 in-lbs
Catalog Number:
70169-D
File #E169693 File #LR701114
11 Pin Octal Socket

Surface or DIN Rail-Mounted
 10A @ 300V
sockets & accessories
 1 or 2 #12-20 AWG Wire

12 in-lbs
Catalog Number:
70170-D
File #E169693 File #LR701114
8 Pin Octal Socket

Back-Mounted
 10A @ 300V
7 in-lbs
Catalog Number:
File #E60008
OR08-PC
11 Pin Octal Socket

Back-Mounted
 10A @ 300V
7 in-lbs
Catalog Number:
File #E60008
SR6P-M11G

SOCKETS & ACCESSORIES
Hold Down Spring
Catalog Number 70166
Can be used for:
 Panel-Mounted Sockets
 Sockets Mounted to 35mm DIN Rail *
* Requires two #8, 3/4” length machine screws with

washers & nuts--contact Macromatic or
www.macromatic.com/70166 for more information.
DIN Rail Adaptor Kit

Catalog Number 70500
Quick & Economical Way to Install Any THx Series

2” x 2” Encapsulated Time Delay Relays on 35mm
sockets & accessories

DIN Rail
 Clip Comes with a Threaded Hole to Eliminate

Need for a Washer & Nut
 All Mounting Hardware Included
 Recommended Tightening Torque of 8 in-lbs.

Understanding the differences between all the functions available in time delay relays can sometimes be a daunting task. To be-
gin with, time delay relays are simply control relays with a time delay built in. Their purpose is to control an event based on time.
Typically, time delay relays are initiated or triggered by one of two methods, depending on the function:
 application of input voltage
 application of a trigger
These triggers can be one of two signals: a control switch (dry contact), i.e., limit switch, push button, float switch, etc., or volt-
age (commonly known as a power trigger).
CAUTION: any time delay relay that is designed to be initiated with a dry contact control switch trigger could be dam-
aged if voltage is applied to the trigger switch terminals. Only products that have a “power trigger” should be used
with voltage as the trigger.
To help understand, some definitions are important:

 Input Voltage - control voltage applied to the input terminals. Depending on the function, input voltage will either initiate
the unit or make it ready to initiate when a trigger is applied.
 Trigger- on certain timing functions, a trigger is used to initiate the unit after input voltage has been applied. As noted
above, this trigger can either be a control switch (dry contact switch) or a power trigger (voltage).
 Output (Load) - every time delay relay has an output (either mechanical relay or solid state) that will open & close to
control the load. Note that the user must provide the voltage to power the load being switched by the output contacts
of the time delay relay. In all wiring diagrams, the output is shown in the normal de-energized position.
Below and on the following pages are both written and visual descriptions on how the common timing functions operate. A Tim-
ing Chart shows the relationship between Input Voltage, Trigger (if present) and Output. If you cannot find a product to fit your
requirements or have any questions, Macromatic’s Application Engineers offer technical information along with product selection
and application assistance. Call us at 800-238-7474 or e-mail us [email protected].
Function/Code Operation Timing Chart
ON DELAY Upon application of input voltage, the time delay (t)

begins. At the end of the time delay (t), the output is
Delay on
energized. Input voltage must be removed to reset the
Operate time delay relay & de-energize the output..
Delay on Make
INTERVAL ON Upon application of input voltage, the output is ener-

Interval gized and the time delay (t) begins. At the end of the
time delay (t), the output is de-energized. Input voltage
must be removed to reset the time delay relay.
OFF DELAY Upon application of input voltage, the time delay relay
Delay on is ready to accept a trigger. When the trigger is applied,
Release the output is energized. Upon removal of the trigger, the
time delay (t) begins. At the end of the time delay (t),
Delay on Break
the output is de-energized. Any application of the trigger
Delay on during the time delay will reset the time delay (t) and the
De-Energization output remains energized.
SINGLE SHOT Upon application of input voltage, the time delay relay
One Shot is ready to accept a trigger. When the trigger is applied,
Momentary the output is energized and the time delay (t) begins.
During the time delay (t), the trigger is ignored. At the
Interval
end of the time delay (t), the output is de-energized and
the time delay relay is ready to accept another trigger.

FLASHER Upon application of input voltage, the time delay (t)

(Off First) begins. At the end of the time delay (t), the output is
energized and remains in that condition for the time
delay (t). At the end of the time delay (t), the output
is de-energized and the sequence repeats until input
voltage is removed.
FLASHER Upon application of input voltage, the output is energized

(ON First) and the time delay (t) begins. At the end of the time
delay (t), the output is de-energized and remains in that
condition for the time delay (t). At the end of the time de-
lay (t), the output is energized and the sequence repeats
until input voltage is removed.
ON/OFF DELAY Upon application of input voltage, the time delay relay
is ready to accept a trigger. When the trigger is applied,
the time delay (t1) begins. At the end of the time delay
(t1), the output is energized. When the trigger is re-
moved, the output contacts remain energized for the time
delay (t2). At the end of the time delay (t2), the output is
de-energized & the time delay relay is ready to accept
another trigger. If the trigger is removed during time
delay period (t1), the output will remain de-energized and
time delay (t1) will reset. If the trigger is reapplied during
time delay period (t2), the output will remain energized
and the time delay (t2) will reset.
Upon application of input voltage, the time delay relay

the output remains de-energized. Upon removal of the
trigger, the output is energized and the time delay (t)
SINGLE SHOT begins. At the end of the time delay (t), the output is
FALLING EDGE de-energized unless the trigger is removed and re-ap-
plied prior to time out (before time delay (t) elapses).
Continuous cycling of the trigger at a rate faster than the
time delay (t) will cause the output to remain energized
indefinitely.

WATCHDOG the output is energized and the time delay (t) begins. At
the end of the time delay (t), the output is de-energized
Retriggerable
unless the trigger is removed and re-applied prior to time
Single Shot out (before time delay (t) elapses). Continuous cycling
of the trigger at a rate faster than the time delay (t) will
cause the output to remain energized indefinitely.

the time delay (t) begins. At the end of the time delay (t),
TRIGGERED the output is energized and remains in that condition as
ON DELAY long as either the trigger is applied or the input voltage
remains. If the trigger is removed during the time delay
(t), the output remains de-energized & the time delay (t)
is reset.

Upon application of input voltage, the time delay (t1)

REPEAT CYCLE begins. At the end of the time delay (t1), the output is
energized and remains in that condition for the time
(OFF 1st) delay (t2). At the end of this time delay, the output is
de-energized and the sequence repeats until input volt-

age is removed.
Upon application of input voltage, the output is energized

REPEAT CYCLE and the time delay (t1) begins. At the end of the time
delay (t1), the output is de-energized and remains in that
(ON 1st) condition for the time delay (t2). At the end of this time
delay, the output is energized and the sequence repeats
until input voltage is removed.

DELAYED begins. At the end of the time delay (t1), the output is
INTERVAL energized and remains in that condition for the time
Single Cycle delay (t2). At the end of this time delay (t2), the output
is de-energized. Input voltage must be removed to reset
the time delay relay.

TRIGGERED the time delay (t1) begins. At the end of the time delay
DELAYED (t1), the output is energized and remains in that condition
INTERVAL for the time delay (t2). At the end of the time delay (t2),
the output is de-energized & the relay is ready to accept
another trigger. During both time delay (t1) & time delay
(t2), the trigger is ignored.
Upon application of input voltage, the output is ener-

gized. When the input voltage is removed, the time
TRUE OFF delay (t) begins. At the end of the time delay (t), the
output is de-energized. Input voltage must be applied
DELAY for a minimum of 0.1 seconds to assure proper opera-
tion. Any application of the input voltage during the time
delay (t) will reset the time delay. No external trigger is
required.

begins. At the end of the time delay (t1), the output is
energized. When the input voltage is removed, the out-
ON DELAY/ put remains energized for the time delay (t2). At the end
TRUE OFF of the time delay (t2), the output is de-energized. Input
DELAY voltage must be applied for a minimum of 0.1 seconds
to assure proper operation. Any application of the input
voltage during the time delay (t2) will keep the output
energized & reset the time delay (t2). No external trigger
is required.

the time delay (t1) begins and the output is energized for
SINGLE the time delay (t2). At the end of this time delay (t2), the
SHOT-FLASHER output is de-energized and remains in that condition for
the time delay (t2). At the end of the time delay (t2), the
output is energized and the sequence repeats until time
delay (t1) is completed. During the time delay (t1), the
trigger is ignored.
Upon application of input voltage, the time delay begins

(t1). At the end of the time delay (t1), the output is
ON DELAY- energized and remains in that condition for the time
delay (t2). At the end of this time delay (t2), the output is
FLASHER de-energized and remains in that condition for the time
delay (t2). At the end of the time delay (t2), the output is
energized and the sequence repeats until input voltage
is removed.

MACROMATIC INDUSTRIAL CONTROLS
Located in Menomonee Falls, Wisconsin, Macromatic Industrial
Controls engineers and manufactures industrial relays that control
electrical processes and monitor power for damaging fault conditions.
Macromatic provides solutions for almost any application in any

industry. Macromatic’s products are used in the HVACR, pump control,
material handling, motor control, generator, and lift and elevator
macromatic industrial controls

industries, plus more.
As an independently-owned manufacturer of state-of-the-art control

and monitoring products for over 40 years, Macromatic takes pride
in its short lead-time, flexible product design, and exceptional technical
support.
Visit www.macromatic.com today.

MACROMATIC INDUSTRIAL CONTROLS
FAMILY OF PRODUCTS
macromatic industrial controls

01.04.19
Specifications subject to change without notice | Macromatic and Time Ranger are registered tradenames of Macromatic Industrial Controls, Inc.

2020 Time Delay Catalog 05 18 20

Uploaded by

Copyright:

Available Formats

2020 Time Delay Catalog 05 18 20

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2020 Time Delay Catalog 05 18 20

Uploaded by

Copyright:

Available Formats

time delay relays

800.238.7474 | www.macromatic.com | [email protected]

THL-1 Series One Screw

Analog-Set 15A SPDT

2 800.238.7474 | www.macromatic.com | [email protected]

Isolated Relay Common

time delay relays | encapsulated

Relay Common Internally Connected to Pin 2

24V AC/DC THR-10568-**J

time delay relays | encapsulated

 See “Definitions of Timing Functions”.

 Cost effective design & 24V AC/DC THR-11568-**J

time delay relays | encapsulated

time delay relays | encapsulated

Dimensions Remote Time Delay

Adjustable Time Delay

Fixed Time Delay

R= 5 x 100,000 = 50,000 ohms (50K ohms)

800.238.7474 | www.macromatic.com | [email protected] 9

 Three Catalog Numbers Offer FUNCTIONS INPUT CATALOG

time delay relays | encapsulated

800.238.7474 | www.macromatic.com | [email protected] 11

 Pilot duty rating  See “Definitions of Timing Functions”.

time delay relays | encapsulated

 Cost effective design &

Application Data Temperature: Operating: -28o to 65oC (-18o to 149oF)

Setting Accuracy: Life:

time delay relays | encapsulated

Dimensions Remote Time Delay

Adjustable Time Delay

Fixed Time Delay

T R = Resistance value required to obtain T

R= 5 x 100,000 = 50,000 ohms (50K ohms)

800.238.7474 | www.macromatic.com | [email protected] 15

 Universal input voltage:

 Encapsulated for protection  See “Definitions of Timing Functions”.

 Output rated 1A continuous/10A

time delay relays | encapsulated

Temperature: Operating: -28o to 65oC (-18o to 149oF) Approvals:

Dimensions Remote Time Delay

Adjustable Time Delay

Fixed Time Delay

Example: Using time range 0.1-10 seconds, what resistor value is

R= 5 x 100,000 = 50,000 ohms (50K ohms)

800.238.7474 | www.macromatic.com | [email protected] 17

 Cost effective design &

 See “Definitions of Timing Functions”.

**TIMING RANGE TABLE

ime Delay Range

800.238.7474 COMBINE FOR TOTAL TIME IN SECONDS

time delay relays | encapsulated

800.238.7474 | www.macromatic.com | [email protected] 19

seconds to 2 hours 24V AC/DC TR-50628-** DIAGRAM 1

 See “Definitions of Timing Functions”.

800.238.7474 www.macromatic.com/remote for information. 1.2 - 120 Min.

www.macromatic.com Sockets & Accessories available

OFF DELAY 120V AC/DC TR-51622-** 11 PIN OCTAL

time delay relays | plug-in

REPEAT CYCLE* 120V AC/DC TR-53122-**